Carvin 1588, 1588P Manual

CARVIN ENGINEERING DATA

1588 SPEAKER SYSTEM

INSTRUCTIONS

1588

Congratulations on your selection of the 1588 loudspeaker. As the big brother of the 3- way 1584, the 1588 Loudspeaker benefits from the same state-of-the-art design and response characteristics, but with one obvious difference—it has twice the size, with twice the components. This translates into an obvious benefit—much more sound output and power with the same extraordinary response as the smaller version. In fact, there isn't any application that this 800 watt 3-way system can't handle, tackling anything from large clubs to outdoor concerts. Like the smaller 1584, the 1588 gives you what other 3-way loudspeakers don't—studio quality sound in large sound reinforcement applications.

The low frequency subsystem of the 1588 utilizes two heavy-duty 15” woofers, chosen for their extended bass response at high levels. The midrange employs two 8” direct radiating midrange drivers, for their exceptionally smooth and extended frequency response. The high frequency consists of one highly accurate titanium horn driver and lens assembly. All components are integrated with our 3-way C1588 crossover to deliver a system response that is smooth from 34 Hz to 19k Hz. Bi-amping can easily be done by selecting the bi-amp switch and input connectors.

See other side for SPS™ Powered Speaker operation

REAR CONNECT PLATE

Two standard 1/4” phone jacks and two Twist Lok™ connectors are featured. See hookup diagrams for full range and biamp options.

NORMAL FULL RANGE HOOKUP	MODE SWITCH: FULL RANGE
	1588	ADDITIONAL
MIXER		SYSTEM
	PRO SOUND REINFORCEMENT	TWIST-LOK
	IMPEDANCE: 4 Ohms	1+ SIGNAL
	POWER RATING: 600 Watts	1– GROUND
	FULL RANGE	2+ NOT USED
		2– NOT USED
OUT		FULL RANGE MODE:
		JACKS WIRED
		IN PARALLEL
	BIAMP—HI FREQ.	BIAMP—LOW FREQ.
	BIAMP

POWER AMP		USA
Serial No.	xxxxxx

	BI-AMP HOOKUP			MODE SWITCH: BIAMP
MIXER		IN (Set FREQ 600Hz) SUB LO	HI	1588
		ELECTRONIC CROSSOVER
				PRO SOUND REINFORCEMENT	TWIST-LOK
				IMPEDANCE: 4 Ohms	1+ SIGNAL
				POWER RATING: 600 Watts	1– GROUND
OUT		MIXER		FULL RANGE	2+ NOT USED
					2– NOT USED
					FULL RANGE MODE:
					JACKS WIRED
					IN PARALLEL
			BIAMP—HI FREQ.		BIAMP—LOW FREQ.
				BIAMP
			Serial No. xxxxxx	USA

SPEAKER CABLES

Use either 1/4” 16 gauge copper wire speaker cable or high-current Twist-Lok™ cables with heavy 4 conductor 12 gauge copper wire. The Carvin PH50 is adequate for lengths up to 50’ under normal use. You can DAISY-CHAIN up to one additional speaker per cable by using the OUTPUT connector. Be sure to note the total impedance to the amp so it is not lower than it’s recommended impedance. See Typical Loudspeaker Impedance Configurations.

SUGGESTIONS FOR OPTIMAL PERFORMANCE

Raise the enclosure to the ear level of your audience for greater coverage. To help control feedback, keep the speakers in front of the microphone. Never direct the microphone towards the speaker. Use a graphic EQ for further feedback control. For greater coverage, add a second speaker system 20° to 30° off axis.

RECEIVING INSPECTION

1588 FREQUENCY RESPONSE

INSPECT YOUR SPEAKER FOR ANY DAMAGE which may have occurred during

shipping. If any damage is found, please notify the shipping company & CARVIN.

SAVE THE CARTON & ALL PACKING MATERIALS. In the event you have to re-ship

your unit, always use the original carton and packing material. This will provide the best

possible protection during shipment. CARVIN and the shipping company are not liable

for any damage caused by improper packing.

SAVE YOUR INVOICE. It will be required for warranty service if needed in the future.

SHIPMENT SHORTAGE. If you find items missing, they may have been shipped

MODEL 1588 SPEAKER SYSTEM SPECS:

separately. Please allow several days for the rest of your order to arrive before inquiring.

RECORD THE SERIAL NUMBER on the enclosed warranty card. Keep your portion of

Frequency Response:

45 Hz to 19 kHz ±3 dB

the card and return the portion with your name and comments to us.

Useable Low Frequency:

34 Hz (-10 dB)

WARRANTY

Power Handling:

800w Continuous Power

Recommended Amp:

100 to 1200 watts

Parts and labor are covered for 1 year on manufacturer’s defects. Warranty does not

Sensitivity:

103 dB SPL, 1 Watt @ 1 meter

cover burned out drivers caused by excessive power or distortion, or physical damage

Coverage Angles: 90° Horizontal, 45° Vertical

caused by general use, moisture or dust. CAUTION: Distortion from power amps can

Nominal Impedance:

4Ω

destroy drivers much faster than clean power. Contact Carvin’s Customer Service at

Crossover Type: C1588 Constant Voltage

800-854-2235 or [e-mail]. Customer is responsible for shipping

Inputs/Outputs: Two 1/4", two Twist-lok™

charges.

Bi-Amp Support: Yes—Panel Switch

TYPICAL LOUDSPEAKER IMPEDANCE CONFIGURATIONS

Horn Driver Protection: Yes–Relay Dimming

Individual speaker or speaker cabinet wiring examples for total impedance.

Woofer Enclosure Type: Vented Box

8Ω TOTAL

SERIES CONNECTION

PARALLEL CONNECTION

SERIES/PARALLEL

Enclosure Covering: Black Duratuff II™

IMPEDANCE

16Ω TOTAL IMPEDANCE

4Ω TOTAL IMPEDANCE

CONNECTION

Dim/Wt: 25"W x 19.25"D x 48.5"H, 124 lbs.

8Ω TOTAL IMPEDANCE

8Ω

+

+

8Ω

16Ω

+

+

8Ω

4Ω

+

8Ω

+

+

Optional Cables: PH50, SPK25, SPK50, SPK100

8Ω

8Ω

+

Optional Vinyl Cover: CVS1588

8Ω

+

+

+

+

8Ω

8Ω

8Ω

+

8Ω

For your records, you may wish to record the following information.

	Serial No._____________________ Invoice Date_______________	12340 World Trade Drive, San Diego, CA 92128
	76-01588 0902	[phone]
		www.carvin.com