Carnes VGBA User Manual
COPYRIGHT CARNES CO.© 1999
ALL RIGHTS RESERVED
SUPERSEDES 26156
26156-A
FAN NO. FAN MOTOR
LOCATION QTY MODEL/SIZE CFM SP RPM SONES HP ELECTRICAL TYPE ACCESSORIES
NOTES
PROJECT:
CONTRACTOR:
ARCHITECT:
ENGINEER:
SUBMITTED BY:DATE:
PAGE ____________ OF __________
CARNES COMPANY, 448 S.Main St., P. O. Box 930040, Verona, WI. 53593-0040 Phone: 608/845-6411 Fax:608/845-6470 E-Mail: carnes@carnes.com www.carnes.com
IP [English] Dimensions
SI (Metric) on Reverse Side
SUBMITTAL SHEET
MODEL V GBA
DUCT BLOWER — INTERIOR/EXTERIOR
VGBA A B C D E H K L M WT.[Lbs.]
09 21 18 23 11-1/4 12-3/4 1 1-1/8 19 16 64
10 22-1/4 20 24-3/4 12-3/8 14-1/8 1 1-1/8 20-1/4 18 74
12 30-1/8 24-3/4 34 14-1/2 16-5/8 2-1/8 1-1/8 25-1/8 21-1/8 175
15 33-3/4 28-5/8 38-1/8 17 19-5/8 2-1/8 1-1/8 30-5/8 25-1/4 214
18 41-1/2 34 44 19-5/8 22-5/8 2-3/4 1-1/8 35-3/8 31-5/8 370
20 44-3/4 41-1/8 57-1/2 25-3/4 25-3/4 3 1-1/8 38-3/8 35-1/8 575
DIMENSIONS [Inches] — [Single Blower Units]
Note: Weight shown is less motor and drive
VGBA A2 B C D E H K L M R T WT. [Lbs.]
29 42 18 23 11-1/4 12-3/4 1 1-1/8 19 16 9-1/4 2 171
30 44-1/2 20 24-3/4 12-3/8 14-1/8 1 1-1/8 20-1/4 18 9-1/4 2 198
32 60-1/8 24-3/4 34 14-1/2 16-5/8 2-1/8 1-1/8 25-1/8 21-1/8 13-1/4 4-3/4 390
35 67-5/8 20-5/8 38-1/8 17 19-5/8 2-1/8 1-1/8 30-5/8 25-1/4 14-1/8 2-7/8 467
38 83-3/4 34 44 19-5/8 22-5/8 2-3/4 1-1/8 35-3/8 31-5/8 19 6-1/4 750
40 89-1/2 41-1/8 57-1/2 25-3/4 25-3/4 3 1-1/8 38-3/8 35-1/8 19 6-1/8 1200
DIMENSIONS [Inches] — [Twin Blower Units]
Note: Weight shown is less motor and drive
Structural Steel Angle Twinning Rail. Top and
Bottom with 5/8” Mounting Holes on “G & S”
Dimension Centres.
COPYRIGHT CARNES CO.© 1999
ALL RIGHTS RESERVED
SUPERSEDES 26156
26156-A
FAN NO. FAN MOTOR
LOCATION QTY MODEL/SIZE CFM SP RPM SONES HP ELECTRICAL TYPE ACCESSORIES
NOTES
PROJECT:
CONTRACTOR:
ARCHITECT:
ENGINEER:
SUBMITTED BY:DATE:
PAGE ____________ OF __________
CARNES COMPANY, 448 S.Main St., P. O. Box 930040, Verona, WI. 53593-0040 Phone: 608/845-6411 Fax:608/845-6470 E-Mail: carnes@carnes.com www.carnes.com
SI (Metric) Dimensions
IP [English] on Reverse Side
SUBMITTAL SHEET
MODEL V GBA
DUCT BLOWER — INTERIOR/EXTERIOR
VGBA A B C D E H K L M WT. (Kg)
09 533 457 584 286 324 25 29 483 406 29
10 565 508 629 314 359 25 29 514 457 34
12 765 629 864 368 422 54 29 638 537 79
15 857 728 968 432 498 54 29 778 641 97
18 1054 864 1118 498 575 70 29 899 803 168
20 1137 1045 1461 654 654 76 29 975 892 261
DIMENSIONS (Millimeters) — (Single Blower Units)
Note: Weight shown is less motor and drive
VGBA A2 B C D E H K L M R T WT.(Kg)
29 1067 457 584 286 324 25 29 483 406 235 51 78
30 1130 508 629 314 359 25 29 514 457 235 51 90
32 1527 629 864 368 422 54 29 638 537 337 121 177
35 1718 524 968 432 498 54 29 778 641 359 73 212
38 2127 864 1118 498 575 70 29 899 803 483 159 340
40 2273 1045 1461 654 654 76 29 975 892 483 156 544
DIMENSIONS (Millimeters) — (Twin Blower Units)
Note: Weight shown is less motor and drive
Structural Steel Angle Twinning Rail. Top and
Bottom with 15.5mm Mounting Holes on “G & S”
Dimension Centres.
Loading...