Canon iR1210, iR1230, iR1270F, iR1310, iR1330 ir1200s-001

...
SERVICE BULLETIN
Issued by Canon Europa N.V.
COPIER
MODEL:
Date: 27.09.02
iR1210, iR1230, iR1270F
No.: iR1200S-001
(FF-T01-L6-000043-01)
LOCATION: READER DRIVE ASSEMBLY
SUBJECT: CHANGE OF SHAPES OF MEMBER PARTS
Reason :
Outline :
Measure for noise
The gear pulley overlapping the idler gear has a depression on the flange due to molding. If the shaft leans, and consequently the idler gear is lifted, the idler gear might come into contact with the depression on the flange, resulting in noise. As a measure for it, round ribs are added to the top and under surfaces of the 45T gear (FU3-0076) and to the under surface of the 37T pulley/16T gear (FU3-0075).
Rib of FU3-0075-020 Ribs of FU3-0076-020
Be sure to replace the 45T gear (FU3-0076) and the 37T pulley/16T gear (FU3-0075) at the same time. Upon replacement of these member parts, if you find the countermeasure mylar, which was a temporary measure, be sure to remove it.
COPIER - 2 - iR1200S-001
Parts
Part Name Part No. UNIT No. Qty IC Location Old READER DRIVE
ASSEMBLY
New READER DRIVE
ASSEMBLY Old PULLEY,37T/GEAR,16T FU3-0075-000 1 NN New PULLEY,37T/GEAR,16T FU3-0075-020 1 Old GEAR,45T FU3-0076-000 1 NN New GEAR,45T FU3-0076-020 1
FG6-7933-000 1 NY
FG6-7933-020 1
Loading...