Read the Set-Up Sheet first, and then read this guide before operating this equipment.
After you finish reading this guide, store it in a safe place for future reference.
ENG
Where to find help
Canon offers a full range of customer technical support* options:
• For e-mail support and answers to frequently asked questions (www.usa.canon.com/consumer)
• 24-hour, 7-day-a-week automated support for troubleshooting issues on most current products
(1-800-423-2366)
• 24-hour, Fax-On-Demand System for product specifications and technical information (1-800526-4345)
• Free technical support Monday-Saturday (excluding holidays) for products still under
warranty** (1-757-413-2848)
• Technical support 7 days a week (excluding holidays) for products no longer under warranty, at
$9.99 per call (1-757-413-2848)
* Support program specifics are subject to change without notice.
** Refer to the product information starting on p.I-7 for warranty details.
Canon, FAXPHONE, and BJ are registered trademarks. UHQ is a trademark of Canon Inc.
All other product and brand names are registered trademarks, trademarks or service marks of
their respective owners.
As an ENERGY STAR® Partner, Canon Inc. has determined that this product meets the
ENERGY STAR
ii
®
guidelines for energy efficiency.
Table of Contents
INTRODUCTION
Where to find help ................................ii
Using this guide ................................... v
Important safety instructions..............vi
Users in the U.S.A..............................viii
Pre-Installation Requirements for Canon
Facsimile Equipment..................................... viii
Connection of the Equipment ........................... viii
This guide provides detailed information on how to set up, operate, maintain, and troubleshoot
your fax.
Please read the list below to become familiar with the symbols, terms, and abbreviations used in
this guide.
Cautions tell you how to avoid actions that could injure you or damage your fax. In order to
use your fax safely, always observe these cautions.
c
Notes provide advice on using your fax more effectively, describe operating restrictions, and tell you
how to avoid minor difficulties. Reading these is recommended to make the most of your fax and its
n
functions.
(see p. xx)Indicates a page number that you can refer to for more information on
the topic of the previous sentence or paragraph.
defaultA setting that remains in effect unless you change it.
documentThe original sheet(s) of paper you send, receive, or copy with your
fax.
menuA list of settings from which you select an item to set up or change. A
menu has a title which appears on the LCD.
3 and 4 buttonsUsed to select an item in a menu. Press 4 to select the next item, and
press 3 to select the previous item.
transaction numberWhen you send or receive a document, your fax automatically assigns
the document a unique transaction number. A transaction number is a
four-digit number that will help you keep track of documents you send
and receive.
TX/RX NO.TX/RX NO. is the abbreviation used for “transaction number.”
TXDenotes Transmission.
RXDenotes Reception.
TRANSMITTING OK
In addition, this guide uses brackets to identify the buttons you press when performing different
functions: [Stop].
LCD display. The contents of the LCD display may vary depending on
the current settings.
v
Important safety instructions
Read these safety instructions thoroughly before using your fax.
Except as specifically described in this guide, do not attempt to service the fax yourself. Never
attempt to disassemble the fax: opening and removing its interior covers will expose you to
c
dangerous voltages and other risks. For all service, contact the Canon Customer Care Center
(see p. ii).
■ Handling and maintenance
• Follow all warnings and instructions marked on the fax.
• Do not subject the fax to strong physical shock or vibration.
• Always unplug the fax before moving or cleaning it.
• To avoid paper jams, never unplug the power cord, open the printer cover, or remove paper
from the multi-purpose tray while printing.
• When transporting the fax, leave the BJ cartridge installed in the cartridge holder and tape the
cartridge holder to the right side of the fax. This will prevent ink spilling inside the fax.
• Always lift the fax by its base as shown below. Never lift it by any of its attachments or covers.
• Do not push objects of any kind into the slots or openings on the fax as they may touch
dangerous voltage points or short out parts. This could result in fire or electric shock.
• Do not allow small objects (such as pins, paper clips, or staples) to fall into the fax. If
something does fall into the fax, unplug it immediately and contact the Canon Customer Care
Center (see p. ii).
• To avoid spillage in or around the fax, do not eat or drink near it. If you spill liquid or if any
substance falls into the fax, unplug the fax immediately and contact the Canon Customer Care
Center (see p. ii).
• Keep the fax clean. Dust accumulation can prevent the fax from operating properly.
• Unplug the fax from the wall outlet and refer service to qualified personnel under the following
conditions:
– When the power cord or plug is damaged or frayed.
– If liquid has spilled into the fax.
– If the fax has been exposed to rain or water.
– If the fax does not operate normally when you have followed the instructions in this guide.
Adjust only those controls that are covered by the instructions in this guide. Improper
adjustment of other controls may result in damage and may require extensive work by a
qualified technician to restore the product to normal operation.
vi
– If the fax has been dropped or the body has been damaged.
– If the fax exhibits a distinct change in performance, indicating a need for servicing.
■ Location
• Place the fax on a flat, stable, vibration-free surface.
• Place the fax in a cool, dry, clean, well ventilated place.
– Make sure the area is free from dust.
– Make sure the location is not affected by extreme temperature changes, and always stays
between 50° and 90.5°F (10° and 32.5°C).
– Make sure the area’s relative humidity is always between 20% and 85%.
• Keep the fax away from direct sunlight.
• Do not use the fax near water. Make sure that no wet or humid objects come into contact with
the fax.
• Do not use or store the fax outdoors.
• Do not install the fax near devices that contain magnets or generate magnetic fields, such as
speakers.
• Place the fax near a standard 120 V AC power outlet.
• To ensure reliable operation of the fax and to protect it from overheating, do not block the
exhaust vent and never block or cover any openings on the fax by placing it on a bed, sofa, rug,
or other similar surface. Do not place the fax in a cupboard or built-in installation, or near a
radiator or other heat source unless proper ventilation is provided. Install the fax approximately
4 in. (10 cm) away from walls and other equipment. For the dimensions of the fax, see p. S-1.
• Do not stack boxes or furniture around the power outlet. Keep the area free so you can reach the
outlet quickly. If you notice anything unusual (smoke, strange odors, noises) around the fax,
unplug it immediately. Contact the Canon Customer Care Center (see p. ii).
• Do not allow anything to rest on the power cord, and do not place the fax where the cord will be
walked on. Make sure the cord is not knotted or kinked.
■ Power supply
• During electrical storms, disconnect the power cord from the power outlet. (Please note that any
documents stored in the fax’s memory will be deleted when you unplug the fax.)
• Whenever you unplug the fax, wait at least five seconds before you plug it in again.
• If dust accumulates around the plug of the power cord when it is connected to a power outlet,
unplug the fax and wipe the plug with a clean, dry cloth.
This product emits low level magnetic flux.
If you use a cardiac pacemaker and feel abnormalities, please move away from this product
c
and consult your doctor.
vii
Users in the U.S.A.
Pre-Installation Requirements for Canon
Facsimile Equipment__________________________
■ Location
Supply a suitable table, cabinet, or desk. See page S-1 for the machine’s dimensions and weight.
■ Order Information
1. Only a single line, touch-tone or rotary telephone set is to be used.
2. Order an RJ11-C modular jack (USOC code), which should be installed by the telephone
company. If the RJ11-C jack is not present, installation cannot occur.
3. Order a normal business line from your telephone company’s business representative. The line
should be a regular voice grade line or the equivalent. Use one line per machine.
DDD (DIRECT DISTANCE DIAL) LINE
-orIDDD (INTERNATIONAL DIRECT DISTANCE DIAL) LINE IF YOU COMMUNICATE
OVERSEAS
Canon recommends an individual line following industry standards, e.g. the 2500 (Touch Tone) or
500 (Rotary/Pulse Dial) telephones. A dedicated extension off a PBX machine without “Call
n
Waiting” can be used with your machine. Key telephone systems are not recommended because they
send non-standard signals to individual telephones for ringing and special codes, which may cause a
fax error.
■ Power Requirements
This equipment should be connected to a standard 120 volt AC, three-wire grounded outlet only.
Do not connect this machine to an outlet or power line shared with other appliances that cause
“electrical noise.” Air conditioners, electric typewriters, copiers, and machines of this sort
generate electrical noise which often interferes with communications equipment and the sending
and receiving of documents.
Connection of the Equipment ________________
This equipment complies with Part 68 of the FCC rules and the requirements adopted by the
ACTA. On the rear panel of this equipment is a label that contains, among other information, a
product identifier in the format US:AAAEQ##TXXXX. If requested, this number must be
provided to the telephone company.
An FCC compliant telephone cord and modular jack are provided with this equipment.
This equipment is designed to be connected to the telephone network or premises wiring using a
compatible modular jack which is Part 68 compliant. See Installation instructions for details.
viii
The Ringer Equivalence Number (REN) is used to determine the number of devices that may be
connected to a telephone line. Excessive RENs on a telephone line may result in the devices not
ringing in response to an incoming call. In most but not all areas, the sum of RENs should not
exceed five (5.0). To be certain of the number of devices that may be connected to a line, as
determined by the total RENs, contact the local telephone company. The REN for this product is
part of the product identifier that has the format US:AAAEQ##TXXXX. The digits represented
by ## are the REN without a decimal point (e.g., 03 is a REN of 0.3).
This equipment may not be used on coin service provided by the telephone company.
Connection to party lines is subjected to state tariffs.
In Case of Equipment Malfunction
Should any malfunction occur which cannot be corrected by the procedures described in this
guide, disconnect the equipment from the telephone line and unplug the power cord. The
telephone line should not be reconnected or the power cord plugged in until the problem is
completely resolved. Users should contact Canon Authorized Service Facilities for servicing of
equipment. Information regarding Authorized Service Facility locations can be obtained by
calling the Canon Customer Care Center. (1-800-423-2366)
Rights of the Telephone Company
Should the equipment cause harm to the telephone network, the telephone company may
temporarily disconnect service. The telephone company also retains the right to make changes in
facilities and services which may affect the operation of this equipment. When such changes are
necessary, the telephone company is required to give adequate prior notice to the user.
FCC Notice
FAXPHONE B45: Facsimile Transceiver, Model H12263
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept an interference received, including interference that may cause
undesired operation.
This equipment has been tested and found to comply with the limits for a class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
n
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
ix
Use of shielded cable is required to comply with class B limits in Subpart B of Part 15 of FCC
Rules.
Do not make any changes or modifications to the equipment unless otherwise specified in the
User’s Guide. If such changes or modifications should be made, you could be required to stop
operation of the equipment.
Canon U.S.A. Inc.
One Canon Plaza, Lake Success, NY 11042, U.S.A.
TEL No. 1-800-423-2366
The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a
computer or other electronic device to send any message via a telephone fax machine unless such
message clearly contains in a margin at the top or bottom of each transmitted page or on the first
page of the transmission, the date and time it is sent and an identification of the business or other
entity, or other individual sending the message and the telephone number of the sending machine
or such business, other entity, or individual.
In order to program this information into your machine, follow the instructions in this User’s
Guide.
x
1
SETTING UP
Unpacking
As you unpack your fax, save the carton and packing material in case you want to move or ship
the fax in the future.
Carefully remove all items from the box.
• It is best to have someone hold the box while you lift the fax and its protective packaging out of
the carton.
If any of these items are damaged or missing, contact the Canon Customer Care Center (see p. ii)
immediately.
BX-3 Black
BJ cartridge
1-1
Removing the shipping materials _____________
1Remove the shipping tapes q from the top of the fax and the protective piece w .
1
2
2Open the printer cover by gently pulling it towards you.
3Remove the shipping tapes q and the protective pieces w.
Close the printer cover until it locks into place.
2
1
1
1-2
2
The actual shipping materials may differ in shape, quantity, and position from the ones shown
above.
n
Assembling the fax
Attaching components _______________________
For user convenience, the destination labels provided with your fax should be fitted over the onetouch speed dialing buttons on the left of the operation panel.
n
1Insert the tabs on the multi-
purpose tray into the slots on
the fax.
1
SETTING UP
2Insert the tabs on the
document tray into the
corresponding slots.
1-3
Making connections
Connecting the telephone line, handset, and
external devices ______________________________
There are three jacks on the left side of the fax for connection of the following:
Handset
Extension phone (a telephone
or cordless phone that you may
wish to have placed away from
the fax to use at a different
location)
Telephone line
Be sure to connect any external devices before using the fax.
1Connect the supplied telephone line cord to the L jack, then the other end to the
telephone line jack on your wall.
1-4
2Place the handset in its cradle, and connect it to the h jack.
Ringer and speaker volume switches
To adjust the volume of the ringer and speaker, use a pen or other pointed object to move these
switches to HIGH or LOW.
Speaker volume switch
Ringer volume switch
3Connect an extension phone to the t jack.
1
SETTING UP
• If you have connected an external device to your fax, be sure to select the correct receive mode
n
(see Chapter 5).
• If the extension phone does not have its own power supply, any redial data in the extension
phone memory may be lost after an extended fax transmission.
1-5
Connecting the AC power cord_______________
Plug the fax into a 120 volt AC outlet.
1Plug the power cord connector into the rear of the fax.
2Plug the other end of the power cord into a properly grounded AC power outlet.
There is no power switch on the fax. The power is on as long as the fax is plugged in.
n
1-6
Loading paper
Paper guidelines ______________________________
• Be sure to load paper of the correct size, weight, and quantity recommended for your fax
(see pp. 3-1, S-1).
• Store all paper wrapped and on a flat surface until ready to use. Keep opened packs in their
original packaging, in a cool, dry location.
• Store paper at 64.5°–75°F (18°–24°C), 40%–60% relative humidity.
• To avoid paper jams and poor print quality, do not print on damp, curled, wrinkled, or torn
paper.
• Use cut-sheet paper only, not paper that comes on a roll.
• Use only paper that has a thickness of between 0.003 and 0.005 in. (0.08 and 0.13 mm). Thick
paper may damage the BJ cartridge print head.
• Do not load paper beyond the paper limit mark (P) or beyond the tab on the paper guide. Doing
so may cause problems. Also, make sure there are no gaps on either side of the paper stack.
Paper limit mark
Tab
1
SETTING UP
No gaps here
• Let the paper run out before refilling the multi-purpose tray. Avoid mixing new stock with paper
already loaded.
• Do not leave paper stacked in the multi-purpose tray for long periods of time since it may bend
or curl and cause problems.
• Certain environmental conditions, such as extreme temperatures or humidity, can cause some
paper to misfeed in the multi-purpose tray. If you have trouble, feed one sheet at a time.
• Depending on the density of the printed pages, the ink may need time to dry. Within two or
three seconds, the ink becomes smudge-resistant. After drying for several minutes, the ink
becomes water-resistant.
• If your printed page contains a large amount of graphics, the ink on the page may be damp due
to the print density. Let the page dry for approx. 30 to 60 seconds. Then remove the page
carefully without touching any surfaces.
• If paper curls after printing, remove it immediately; otherwise paper jams may occur.
• The platen (a roller inside the fax) may become inked if paper misfeeds. If this happens, clean
inside the fax (see p. 9-3).
1-7
Loading paper in the multi-purpose tray______
If necessary, remove the document tray when loading paper.
1Squeeze, then slide the paper guide to the left.
2Fan a stack of paper, then tap the edge of the stack on a flat surface to even the stack.
1-8
3Insert the stack into the multi-purpose tray q, and align the right edge of the stack with
the right side of the multi-purpose tray. Then slide the paper guide w snugly against the
left edge of the stack.
1
2
Installing the BJ cartridge
The first time you set up your fax, you have to install the BJ cartridge before you can begin
receiving and copying documents.
For information on replacing the BJ cartridge, see p. 9-6.
Guidelines ____________________________________
• Use only a Canon BX-3 Black BJ cartridge in your fax.
• Store BJ cartridges at room temperature.
• When the BJ cartridge print head is left exposed, it easily dries out and becomes unusable. To
avoid this, follow these recommendations:
– Keep BJ cartridges in the packaging until you are ready to use them.
– Never remove the BJ cartridge unless you are going to replace it.
– Keep the cartridge holder in the home position (on the right side of the fax) when you are not
using the fax.
• Replace BJ cartridges after one year of use, even if you have not been alerted to replace it.
If you need to unplug the fax, wait until it returns to standby mode (date and receive mode displayed
on the LCD). Otherwise the cartridge holder may not be in its home position; causing the BJ
n
cartridge to remain uncapped and dry out.
• Store BJ cartridges out of the reach
c
of children. If anyone inadvertently
ingests ink, consult a physician
immediately.
• Do not touch the metallic areas on the
BJ cartridge.
1
SETTING UP
Do not touch these metallic areas.
The ink in the BJ cartridge is difficult to clean up if spilled. Follow the precautions below when
handling the BJ cartridge.
• Carefully remove packaging from BJ cartridges.
• Do not attempt to disassemble or refill BJ cartridges.
• Do not shake or drop BJ cartridges.
1-9
Installing the BJ cartridge in your fax ________
When a BJ cartridge is not installed in your fax, PUT IN CARTRIDGE is displayed on the LCD.
1Make sure the fax is plugged in.
2Load the paper in the multi-purpose tray.
3Open the printer cover by gently pulling it towards you (see p. 1-2).
4Raise the cartridge lock lever on the cartridge holder.
1-10
5Remove the BJ cartridge from its package, then remove the orange protective cap q and
tape w.
1
2
Discard the cap and tape. Never attempt to reattach them to the BJ cartridge print head.
6Align the slot in the cartridge with the yellow post in the fax, and with the label facing
outwards, insert the BJ cartridge into the cartridge holder. Lower the cartridge lock lever
until you hear a click to lock the cartridge in place.
The yellow post (BJ cartridge guide) should be visible through the slot. The BJ cartridge tilts slightly
to the left before lowering the cartridge lock lever.
7Close the printer cover.
If the AUTO TEST PRINT setting is set to ON:
The fax automatically prints a test page.
The fax prints a test page every time you insert a BJ cartridge.
You can turn off automatic test printing by changing the AUTO TEST PRINT setting. See SYSTEM
SETTINGS, p. 7-5.
• Do not try to manually move or stop the cartridge holder.
• Do not touch the components shown below or any metal parts.
c
1
SETTING UP
Guide railRibbon cable
Circuit boardRound shaft
Testing the fax________________________________
After you have assembled the fax, loaded the paper, and installed the BJ cartridge, you can make
sure the fax is printing properly by making several copies of a document (see p. 8-1).
If you have problems printing, see Chapter 9.
1-11
2
PREPARING TO USE YOUR FAX
Main components of your fax
Document tray
Multi-purpose tray
Document guide
Handset
Operation panel
Printer cover
2
PREPARING TO USE YOUR FAX
Document
release button
Cartridge holder
2-1
Fax controls — the operation panel
TAM LED (see p. 6-2)
Microphone
(see pp. 2-12, 6-1)
LCD
Rewind/Forward buttons (see p. 6-8)
01
Report02Cleaning03Send Options
05
04
Space06Clear
07
Polling08Ink Saver09Caller History
Receive Mode Resolution
One-touch speed
dialing/Special
function buttons
(see below)
01
Report02Cleaning03Send Options
04
07
Receive Mode Resolution
05
Space06Clear
Polling08Ink Saver09Caller History
Function
Function
AM Mode
Delete Record
Numeric buttons
Redial/
Pause
Hook
Coded Dial/
Voice Dial
Start/
Copy
See next page for buttons on
the operation panel.
Report button (see p. 7-7)
Cleaning button (see p. 9-5)
Send Options button (see p. 4-3)
Space button (see p. 2-5)
Clear button (see p. 2-5)
Polling button (see p. 5-6)
Ink Saver button (see p. 5-6)
Caller History button (see p. 4-8)
Receive Mode button (see p. 5-2)
Resolution button (see pp. 4-1, 8-1)
Function button (see p. 2-6)
PlayT
Directory
Stop
The buttons on the left of the operation panel have the following two functions:
• One-touch speed dialing buttons (see p. 2-11)
• Special function buttons
When the [Function] button is pressed, the special function buttons (function marked under
each button) can be used to perform various operations.
2-2
/
TAM Mode
Redial/
Pause
Hook
Delete
Voice Dial
Start /
Copy
Record
Play
Coded Dial/
Director
Stop
Scroll/Cursor buttons (see pp. 2-5, 7-1)
TAM Mode
TAM Mode button (see p. 6-2)
Delete
Delete button (see p. 6-7)
Record
Record button (see p. 6-1)
Play
2
PREPARING TO USE YOUR FAX
Play button (see p. 6-8)
Redial/
y
Pause
Redial/Pause button (see pp. 4-8, 4-9)
Voice Dial
Voice Dial button (see p. 4-7)
Coded Dial
Directory
Coded Dial/Directory button (see pp. 4-5, 4-6)
Stop button
Start/Copy button
Hook button (see p. 4-4)
2-3
Guidelines for entering
numbers, letters, and symbols
When you come to a step that requires you to enter a name or number, see the table below to
determine which numeric button to press for the letter you want.
ButtonLetter Mode (:A)Number Mode (:1)
1
ABC
2
DEF
3
GHI
4
JKL
5
MNO
6
PRS
7
TUV
8
WXYZ
9
OPER
0
SYMB
#
TONE
Letter mode (:A)Number mode (:1)
After 60 seconds of no operation panel input, the fax returns to standby mode and any unregistered
changes are lost.
n
■ Entering letters and numbers
1Press [:] to switch between the letter and number mode.
_:A
2Press the numeric button that contains the letter or number you want.
• Press repeatedly until the letter you want appears.
• If you are unsure which button to press, see the table above.
C:A
2-4
3Continue entering other letters or numbers using the numeric buttons.
• If the next letter you want to enter is under a different numeric button, simply press that button
until the letter you want appears.
-orIf the next letter you want to enter is under the same numeric button you pressed in step 2, press
[4] to move the cursor to the right. Then press that same numeric button repeatedly until the letter
you want appears.
• To enter a space, press [Space].
■ Entering symbols
1Press [#] repeatedly until the symbol you want appears.
#:1
2If you want to enter another symbol, press [4] to move the cursor to the right, then press
[#] repeatedly until the symbol you want appears.
Correcting mistakes __________________________
You can clear an entire entry by pressing [Clear]. Alternatively, follow the procedure below to
correct individual letters:
2
PREPARING TO USE YOUR FAX
1Use [3] or [4] to move the cursor under the incorrect letter.
CANEN:A
2Use the numeric buttons to enter the correct letter over the incorrect letter.
CANON:A
3When you have finished making corrections, press [Start/Copy] to register your new entry.
2-5
Setting the TEL LINE TYPE
Before using your fax, make sure it is set for the telephone line type of your telephone system. If
you are unsure of your telephone line type, check with your local telephone company.
See pp. 2-2, 2-3 for the buttons on the operation panel.
1Press [Function].
▼
Press [Start/Copy] twice.
DATE & TIME
2Use [3] or [4] to select TEL LINE TYPE.
▼
Press [Start/Copy].
TOUCH TONE
3Use [3] or [4] to select TOUCH TONE.
You can also select ROTARY PULSE.
▼
Press [Start/Copy].
2-6
AUTO V OICE DIAL
4Press [Stop].
Setting ends and the fax returns to standby mode.
Registering sender information
Personalizing your fax ________________________
■ Identifying your documents
When sending a document, you can have your fax number and your name (known as your ID),
and the current date and time printed out by the receiving fax machine. This information is called
your TTI (Transmit Terminal Identification) and appears at the top of the faxed document in
small type.
By identifying the documents you send, the receiving party will be able to recognize your fax
messages at a glance. The illustration below shows a sample document with the identifying
information.
The name of the party who is
receiving the document
Your name or company name
Your fax/telephone number
TELEPHONE # MARK (You can select TEL or FAX, see p. 7-2.)
The date and time you sent the document
2
PREPARING TO USE YOUR FAX
The top line includes the name of the receiving party if you send the document using one-touch
speed dialing or coded speed dialing and you registered the party’s name.
Setting the date and time ____________________
The date and time appear on the LCD as well as on the documents you send.
1Press [Function].
▼
Press [Start/Copy] three times.
12/20/200213:30
2Use the numeric buttons to enter the date and time using the month-day-year format
(MM/DD/20YY).
• Set the time using the 24-hour clock system. Precede single digits with a zero.
Example: 3:00 p.m. = 15:00
• To change the date format, see SYSTEM SETTINGS, p. 7-5.
2-7
3Press [Start/Copy].
4Press [Stop].
Registration ends and the fax returns to standby mode.
Registering your fax/telephone number and
name__________________________________________
This information appears at the top of each document you send.
1Press [Function].
▼
Press [Start/Copy] twice.
DATE & TIME
2Use [3] or [4] to select UNIT TELEPHONE #.
▼
Press [Start/Copy].
3Enter your fax number (up to 20 digits) using the numeric buttons.
You can enter a plus sign (+) or space to make your number easier to read. To enter a plus sign (+),
press [#].
2-8
TEL=123 xxxx
▼
Press [Start/Copy] twice.
4Enter your name (up to 16 letters) using the numeric buttons (see p. 2-4).
CANON : A
▼
Press [Start/Copy].
5Press [Stop].
Registration ends and the fax returns to standby mode.
Loading...
+ 94 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.