VT-Multi Guide
Introduction
Installing the VT-Multi driver lets you connect more than one VT-1000 for use with audio communication applications such as OmniJoin. You can connect up to 4 VT-1000 devices at the same time. Connecting more than one VT-1000 offers improved audio coverage in larger spaces and in larger group meetings.
For OmniJoin please visit http://www.brother.com/product/webconferencing
[Note]
Please connect all VT-1000 units to individual USB ports on your computer. Do not connect the units to a USB hub.
Please do not connect more than 4 VT-1000 devices. Any additional VT-1000 devices attached will not function, and may cause audio problems.
Please refer to the VT-1000 User’s Guide for more detailed operation instructions.
To avoid interference, keep a distance of 1m or more between each VT-1000.
Please make sure that the presentation mode
indicator is off, otherwise audio problems can occur.
[System Requirements]
OS |
Windows® XP SP3 32bit (Installation of .NET |
|
framework 3.5 is required) |
|
Windows Vista® 32/64bit |
|
Windows® 7 32/64bit |
|
Windows® 8 32/64bit |
CPU |
Intel® Core™ 2 Quad, Intel® Core™ i3, Intel® |
|
Core™ i5, Intel® Core™ i7 |
RAM |
4 GB or more |
HDD |
100 MB of available space |
Please note: Some applications and operating environments can interrupt audio.
Only the operating systems shown are supported.
Installation
Window® 7 is shown here as an example. The instructions may vary depending on the Windows® OS version.
Please make sure you are logged in with administrator rights.
If you have connected a VT-1000 to your computer, please disconnect it before the installation.
If there are any applications running, close them.
If the User Account Control prompt is displayed, click Continue.
If the Windows® Security alert prompt is displayed, check Always trust software from “Brother Industries, ltd and click Install.
1.Download VT-Multi Driver from Brother Solutions Center at http://solutions.brother.com
2.Double-click the download file to start the installation process.
3.When the setup wizard screen appears, click Next. Follow the on-screen instructions.
4.After finishing the installation, restart your computer.
Using VT-Multi
Please connect the VT-1000 devices to your computer before starting an OmniJoin meeting, or opening your audio communication application.
Using with OmniJoin
1.Select the Audio tab, then click Device Settings.
2.Select VT-Multi in Playback Device and click Next, then select VT-Multi in Recording Device, and then click Finish to save the settings.
Please make sure that VT-Multi is selected for both Playback Device and Recording Device.
Using with other applications
Select VT-Multi as the speaker output and microphone input in the audio settings of your application.
Please refer to the documentation for your application for further information.