How it Works
Bosch
Loading...
Eazeo
Installation Manual
19 pgs646.97 Kb0

Bosch Eazeo Installation Manual

Bosch Security Systems | 2003-11
Eazeo DVR | Installation Manual | Table of Contents EN | 3
1. SAFETY PRECAUTIONS .........................................................................................................................................................5
1.1 IMPORTANT SAFEGUARDS .......................................................................................................................5
1.2 FCC INFORMATION ......................................................................................................................................6
2. INTRODUCTION .........................................................................................................................................................................6
2.1 FEATURES ........................................................................................................................................................6
2.2 FRONT PANEL ................................................................................................................................................7
2.3 REAR PANEL ...................................................................................................................................................8
2.3.1 Power .....................................................................................................................................................8
2.3.2 Eazeo Observation Unit .....................................................................................................................8
2.3.3 RS232 serial connector ....................................................................................................................8
2.3.4 IR remote control eye connector .....................................................................................................8
2.3.5 LAN connector ....................................................................................................................................8
2.3.6 Alarm connections ..............................................................................................................................9
2.4 REMOTE CONTROL UNIT ...........................................................................................................................9
3. OPERATION ...............................................................................................................................................................................10
3.2.1 Pre-alarm recording ......................................................................................................................... 10
3.5.1 Still image copy ................................................................................................................................ 11
3.5.2 Copy to movie file ............................................................................................................................ 11
4. MENU SET-UP ..........................................................................................................................................................................12
Bosch Security Systems | 2003-11
Eazeo DVR | Installation Manual | Table of Contents EN | 4
5. VIEW VIA INTERNET/INTRANET ..................................................................................................................................... 16
5.2.1 Playback mode icons ...................................................................................................................... 17
5.2.2 Live mode icons ............................................................................................................................... 17
5.2.3 Search icons ..................................................................................................................................... 17
6. SPECIFICATIONS ...................................................................................................................................................................18
6.1.1 RS-232 control protocol ................................................................................................................ 18
Display abbreviations
II Pause
A.REC Alarm record BASIC Basic quality HIGH High quality LOW Low quality LOWER Lowest quality MENU Menu PAUSE Pause P.E ND Paus e end PLAY Play P.END Play end P.R PT Pl ay rep eat REC Record SRCH Search STDRD Standard quality SUPER Superior quality SYSLD System loading T.REC Timer recording
Bosch Security Systems | 2003-11
Eazeo DVR | Installation Manual | Chapter 1 EN | 5
1 SAFETY PRECAUTIONS
1.1 IMPORTANT SAFEGUARDS
1 Please read these safety instructions carefully. 2 Please keep this User's Manual for later reference. 3 Please disconnect this equipment from connecter
before cleaning. Don't use liquid or sprayed detergent for cleaning. Use moisture sheet or cloth for cleaning.
4 Make sure the voltage of the power source when
connect the equipment to the power outlet.
5 All cautions and warnings on the equipment should
be noted.
6 Never pour any liquid into opening, this could cause
fire or electrical shock.
7 Never open the equipment. For safety reason, the
equipment should only be opened by qualified service personnel.
8 If one of the following situations arises, get the
equipment checked by a service personnel : a Liquid has penetrated into the equipment.
b The equipment has been exposed to moisture. c The equipment has not work well or you can not
get it work according to user's manual. d The equipment has dropped and damaged. e If the equipment has obvious sign of breakage.
9 DO NOT LEAVE THIS EQUIPMENT IN AN
ENVIRONMENT UNCONDITIONED, STORAGE TEMPERATURE ABOVE 50°C, IT MAY DAMAGE THE EQUIPMENT.
10Operation Ambient 50°C 11 Power cords : Use the proper power cord with
correct attachment plug type. If the power source is 120 V AC, use a power cord that has UL and CSA approvals. If the power source is a 240 V AC supply, use the tandem (T blade) type attachment plug with ground conductor power cord that meets the respective European country's safety regulations, such as VDE for Germany. Plug need approval with VDE 0620, connector approval by VDE 0625, minimum 10A, power cord H05VV-F or VW-1,0.75 mm2 x 3G should be used.
12
13 The back of the recorder should only be removed by
qualified maintenance and service personnel.
Ventilation
14 Keep ventilation openings free to avoid the recorder
for overheating.
15 Do not place the recorder in the immediate vicinity
of a heating source.
16 Do not install this equipment in a confined space
such as a bookcase or similar unit.
Cleaning
17 You can clean the unit with a moist fluff-free cloth or
shammy leather cloth.
Disposal
18 This recorder contains a battery. Do not dispose of
this battery with other solid waste. The battery is located inside the enclosure of this recorder.
Danger
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of an uninsulated “dangerous voltage” within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Warning
The exclamation mark within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
Caution
To reduce the risk of electric shock, do not remove cover (or back). No user-serviceable parts inside. Refer servicing to qualified service personnel.
Warning
To reduce the risk of fire or electric shock, this apparatus should not be exposed to rain or moisture and objects filled with liquids,such as vases, should not be placed on this apparatus.
Bosch Security Systems | 2003-11
Eazeo DVR | Installation Manual | Chapter 2 EN | 6
Remark
Bosch has a strong commitment towards the environment. This unit has been designed to respect the environment as much as possible.
1.2 FCC INFORMATION
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help.
Note
Any change or modification not expressly approved by Bosch of the equipment authorization could void the user's authority to operate the equipment. For additional information or to speak to a representative, please contact the Bosch Security Systems location nearest you or visit our web site at www.boschsecuritysystems.com (See: Your Guide To Observation)
2 Introduction
The Eazeo Digital Video Recorder brings advanced recording and playback technology to the Eazeo color observation system. The Eazeo DVR allows uninterrrupted recording in either continuous or time­lapse modes for as long as a week or more. There are no video tapes to change or store, and frequent, costly VCR maintenance is eliminated.
The Eazeo DVR can record at speeds up to 25/30 images per second with PAL/NTSC formats and replay events instantly. The Eazeo DVR incorporates all the benefits of digital video recording, is simple to install, and operates just like a VCR. The highly efficient compression technology, as well as the superior clarity and detail of recorder images, make the Eazeo DVR ideally suited for integration with the Eazeo color observation system.
2.1 Features
• Provides superior quality images
• Pre-Alarm image recording
• Time lapse and real time recording
• Refresh rate up to 25 images for PAL and 30 images for NTSC
• Quick Search by date/time, alarm events, and recording list
• Fast and slow playback of recorded video in various speeds
• On-screen setup menu and system timer
• Password protection
• RS-232 communication port
• Built-in M-JPEG compression/decompression with configurable quality
• Audio recording capability
• Programmed with various time-lapse speeds
• Data can be stored on Compact Flash Card
• Remote control
• Remote view recordings and live pictures with Web-based browser
Warning
This device is intended for use in public areas only. Surreptitious recording of oral communications is strictly prohibited by U.S. Federal law.
Bosch Security Systems | 2003-11
Eazeo DVR | Installation Manual | Chapter 2 EN | 7
2.2 Front panel
REC: Press to start recording (red light in key lights when unit is recording).
OSD: - Press once to display the time/date and the
disk usage.
- Press a second time to display disk size, record position, play position and and record quality.
- Press a third time to switch off the on-
screen display. STOP: Press to stop recording or playback. PLAY: Press to start playback. PAUSE: Press to pause the playback picture. SEARCH: Press to enter the search menu. Shuttle Ring:
In playback mode, turn Shuttle Ring clockwise to speed up or counterclockwise to slow down the forward or reverse play of the picture. In pause mode, turn Shuttle Ring to move the picture slowly forward or reverse.
Jog Dial: In playback mode, turn Jog Dial to select the playback speed. In pause mode, turn Jog Dial to move forward or backward image by image. In menu mode, turn Jog Dial to navigate through the menu pages or to select data values. Use together with the ENTER key to set menu values.
ENTER: Press to confirm a selection or a changed data value.
MENU: Press to enter or leave the setup menu. Remote control IR receiver window. LCD display
In standby mode, shows current date/time and the quality and rate setting for normal recording. In Recording mode, shows current date/time and the REC and current recording rate. In Playback mode, shows playback date/time and the PLAY and current playback rate. (For information on the displayed messages see the abbreviations list at the beginning of this manual.)
ALARM: Indicator lights when an alarm occurs. LAN: Indicator lights when network is accessed. Compact Flash card slot: Insert a Compact Flash
Card. Press the black button beside the slot to remove the card.
COPY: Press to copy still picture or video stream onto Compact Flash card.
1 2 3 4 5 6 7 8 9
10121314 1115
16
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Bosch Security Systems | 2003-11
Eazeo DVR | Installation Manual | Chapter 2 EN | 8
2.3 Rear panel
When connecting to an Eazeo Observation System only the connectors described below are used. The other connectors are present to facilitate the use of the unit in different application areas.
2.3.1 Power
Connect the power suppy cable to the power socket at the rear of the unit. Use the power switch to switch the unit ON or OFF.
2.3.2 Eazeo Observation Unit
The supplied cable connects the audio and video signals from the Eazeo Observation System to the Eazeo DVR.
Note
Please note that in the following procedure the cable connectors marked OUT are connected to the IN sockets.
• Connect the cable connector marked VIDEO IN to the BNC socket marked Monitor Out on the rear of the unit.
• Connect the cable connector marked VIDEO OUT to the BNC socket marked Video In on the rear of the unit.
• Connect the cable connector marked AUDIO IN to the socket marked Audio Out 1 on the rear of the unit.
• Connect the cable connector marked AUDIO OUT to the socket marked Audio In 1 on the rear of the unit.
• To synchronise switching (with a multiplexer) connect the single wire of the cable to the VEXT connection on the rear of the unit.
2.3.3 RS232 serial connector
Connect D-Sub 9-pin connector to the RS232 port if you want to control the unit remotely.
2.3.4 IR remote control eye connector
If the remote control IR receiver window at the front is hidden from view (if the unit is mounted in a cupboard), connect the optionally available extension IR cable to the remote control connector. Position the receiver eye so that it is in line-of-sight of the remote control unit.
2.3.5 LAN connector
To connect the unit to a network use the RJ-45 LAN connector at the rear of the unit.
Off
Power
AC 100-240
In1 In2
Out1 Out2 Monitor Out Out Out 1 Out 2
Looping out
RS 232 Remote Control
GND
ALM-NC
ALM-NO
ALM-CO
VEXT
DISKFULL
NC3
NC4
GND
In
In
Video
S-VideoMonitor In
Audio Mux main
LAN
GND
ALM-IN
ALM-RST
REC
NC1
NC2
GND
100-240 Vac
VIDEO
IN
VEXT
VIDEO
OUT
AUDIO
IN
AUDIO
OUT
Power switch
RS-232
connector
IR remote
control eye
connector
Network connector
To Eazeo Observation System
VIDEO OUT
VIDEO IN
AUDIO OUT
AUDIO IN
Loading...
+ 13 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use