Bosch D8224-SP Specsheet

Systems | D8224‑SP Low‑profile Proximity Card Reader

D8224‑SP Low‑profile Proximity Card
Reader

Wiegand or magnetic stripe compatibility

▶

Indoor and outdoor design

▶

LED indicator

▶

Test features

▶

The D8224-SP Low‑profile Proximity Card Reader can use
Wiegand
is attractive, easily mounted, with a weatherproof
enclosure. The unobtrusive reader is reliable, has a
consistent read range, and low power consumption.

Functions

Wiegand or Magnetic Stripe Compatibility

Wiegand output
protocol access control systems. The magnetic stripe
model interfaces with most systems that accept magnetic
stripe readers.

Indoor and Outdoor Design

The reader is sealed in a weatherized polycarbonate
enclosure designed to withstand harsh environments and
provide vandal resistance.

LED Indicator

When a proximity card is presented to the reader, the red
LED flashes green and the beeper sounds. Both the beeper
and LED configurations can be controlled individually by the
host system.

protocol

or magnetic stripe interfaces. The reader

model interfaces with all existing Wiegand

Test Features

During reader startup, a self‑test verifies the setup
configuration, determines
LED and beeper, and initializes reader operation. An
additional external loop‑back test allows for verifying the
reader outputs and inputs without using additional test
equipment.

Installation/Configuration Notes

Compatibility Information

Credentials D8236‑10 Wiegand Proximity Card, 26‑bit

D8236KF‑10 Wiegand Proximity Token, 26‑bit
D8236TG‑10 Wiegand Proximity Adhesive Tag, 26‑bit

Systems ReadykeyPRO

Readykey
D9412G Control Panel
D7412G Control Panel

Mounting Considerations

The D8224‑SP proximity reader mounts directly on metal
with minimal impact on read range. Use a single‑gang
electrical box for easy installation.

internal or external control of the

www.boschsecurity.com

2 | D8224‑SP Low‑profile Proximity Card Reader

Cable Distance

Interface type Cable length

Wiegand 500 ft (150 m)

Magnetic stripe 50 ft (15 m)

Note Recommended cable is 22 AWG (0.8 mm)

five‑conductor minimum shielded cable.
Additional conductors can be required for LED
or beeper control.

Technical Specifications

Environmental

Operating Temperature -22°F to 150°F (-30°C to 65°C)

Operating Humidity 0 to 95% non‑condensing

Electrical

Current Requirements Average: 30 mA (5 VDC); 20 mA

(12 VDC)
Peak: 110 mA (5 VDC); 115 mA (12 VDC)

Frequency 125 kHz

Power Supply 5 VDC to 16 VDC

Note: Linear power supplies are recommended.

Mechanical

Ordering Information

D8224‑SP Low‑profile Proximity Card
Reader

Provides Wiegand or magnetic stripe compat­ibility and an indoor and outdoor design.

Accessories

D8236‑10 Wiegand Proximity Card (26‑bit)

Randomly‑coded proximity card that is Wie-

26‑bit. Each package contains ten cards.

gand

D8236KF‑10 Wiegand Proximity Token
(26‑bit)

Randomly‑coded, gray, plastic, Wiegand
26‑bit token. Attaches to a key chain. Each
package contains ten tokens.

D8236TG‑10 Wiegand Proximity Adhesive
Tag (26‑bit)

Randomly‑coded, gray, plastic, Wiegand
26‑bit adhesive tag. Attaches to non‑metallic
surfaces. Each package contains ten tags.

D8224-SP

D8236-10

D8236KF-10

D8236TG-10

Dimensions 4.7 in. x 3.0 in. x 0.7 in.

(11.9 cm x 7.6 cm x 1.7 cm)

Material Polycarbonate plastic

Weight 3.3 oz (94 g)

Americas:

Bosch Security Systems, Inc.
130 Perinton Parkway
Fairport, New York, 14450, USA
Phone: [phone]
Fax: [phone]
[e-mail]
www.boschsecurity.us

© Bosch Security Systems Inc. 2010 | Data subject to change without notice
T1621995531 | Cur: en-US, V7, 4 Jul 2010

Europe, Middle East, Africa:

Bosch Security Systems B.V.
P.O. Box 80002
5600 JB Eindhoven, The Netherlands
Phone: + 31 40 2577 284
Fax: [phone]
[e-mail]
www.boschsecurity.com

Asia-Pacific:

Robert Bosch
11 Bishan Street 21
Singapore 573943
Phone: [phone]
Fax: [phone]
[e-mail]
www.boschsecurity.com

(SEA) Pte Ltd, Security Systems

Represented by