Bosch B915I, B915 User Quick Reference Manual

1 | Overview

1

PREV ()2ENTER (▬)3NEXT ()

4

7

ESC () CMD (#)

8

0

9

5 6

Area 1

Ready to turn on

Display

The keypad shows the status of the security system. When several events

occur, the keypad shows each event in order of priority.

*As configured by your security company.
NOTICE! The Access menu and the option to configure a card are available on compatible security systems only.

Status indicators

The indicators show how your system is operating.

Part On status

Green - Ready to turn Part On (part arm). Red - Part On (part armed).

Power

Blue - AC power present.

Trouble

Yellow - A Trouble condition exists.

All On status

Green - Ready to turn All On (arm). Red - All On (armed).

Navigation and Function keys

These keys start the backlighting and the tones.

Command Function

[CMD] 0 Bypass

[CMD] 0 0 Unbypass

[CMD] 1 All on (with delay)

[CMD] 1 1 All On, Instant

[CMD] 2 Part On, Instant

[CMD] 3 Part On (with delay)

[CMD] 4 Silence Trouble Sounders

[CMD] 4 0 See Alarms

[CMD] 4 1 Test Report

[CMD] 4 2 Status Report

[CMD] 4 3 RPS Answer

[CMD] 4 4 Intrusion Walk Test

[CMD] 4 5 Date and Time

[CMD] 4 6 Door Control Menu

[CMD] 4 7 Reset Sensors

Command Function

[CMD] 4 9 Change Display

[CMD] 5 0 Go to Area

[CMD] 5 1 Extend Close

[CMD] 5 2 SKED Menu

[CMD] 5 3 Delete User

[CMD] 5 4 Output Change Menu

[CMD] 5 5 Change Passcode

[CMD] 5 6 Add User

[CMD] 5 7 Default Text

[CMD] 5 8 Fire Walk Test

[CMD] 5 9 Show Revision

[CMD] 6 Watch Mode

[CMD] 7* Special Alert _____________

[CMD] 8 Open Main Menu

[CMD] 9* Special Alert _____________

PREV (p) and NEXT (q)

Use [PREV] (previous) and [NEXT] to scroll through lists and text.

ESC (Ø)

Use [ESC] (escape) to exit from menus and functions, or

to delete letters or numbers.

ENTER (▬)

Use [ENTER] after entering your passcode, to select an item, or

to enter Yes to a request.

CMD (#)

Use [CMD] (command) in combination with one or

two number keys to perform select functions.

Commands

You can operate functions
with the [CMD] plus one or
two digits.

Touch the [CMD] key, then
enter the command.

- or ­After you press [CMD],
then use [PREV] and
[NEXT] to move through the
commands. To engage the
command, touch [ENTER].

Use [CMD]8 to open the Main
menu.

Menu tree

[CMD] [8] shows the menu tree. Each option has a number. Touch the number for the desired menu, or use [PREV] or

[NEXT] to review your options, and then touch [ENTER] when you see the desired option.

Bosch Security Systems, Inc.

130 Perinton Parkway
Fairport, NY 14450
USA

www.boschsecurity.com

Bosch Sicherheitssysteme GmbH

Robert-Bosch-Ring 5
85630 Grasbrunn
Germany

3 | Turn off (disarm) your system

© 2018 Bosch Security Systems, Inc. F.01U.297.874 | 05 | 2018.05

Copyright

This document is the intellectual property of Bosch Security
Systems, Inc. and is protected by copyright. All rights reserved.

Trademarks

All hardware and software product names used in this document are
likely to be registered trademarks and must be treated accordingly.

El-gr: Μεταβείτε στη διεύθυνση https://gr.boschsecurity.com/el/ για την
τεκμηρίωση σε αυτήν τη γλώσσα.

Es-es: Visite https://es.boschsecurity.com/es/ para obtener documentación en
este idioma.

Fr-fr: Accédez à l’adresse https://fr.boschsecurity.com/fr/ pour obtenir la
documentation dans cette langue.

Hu-hu: A honosított dokumentációt lásd a https://hu.boschsecurity.com/hu/
oldalon.

It-it: Andare a https://it.boschsecurity.com/it/ per la documentazione in questa
lingua.

Pl-pl: Dokumentacja w tym języku znajduje się w witrynie https://
pl.boschsecurity.com/pl/

Pt-br: Acesse http://pt.boschsecurity.com/pt/ para obter a documentação neste
idioma.

8 | Keypad cleaning

Use a soft cloth or a non-abrasive cleaning solution. Spray the cleaner
onto the cloth, not the keypad.

Use [CMD][5][5], then the prompts.

To set All On with a delay, enter your passcode, then [ENTER].

To open the Main menu use [CMD][8].
For All On: Go to [1] On/Off > [1] All On > [1] All On Delay.
For All On, Instant: Go to [1] On/Off > [1] All On > [2] All On Instant.
For Part On: Go to [1] On/Off > [2] Part On > [1] Part On Delay
For Part On, Instant: Go to [1] On/Off > [2] Part On > [2] Part On Instant.

1. Open the Main menu.

2. Touch [CMD][8].

3. Go to [6] Shortcuts.

4. To choose the shortcut, touch [NEXT] and [ENTER].

When the security system is in alarm, the number of alarms shows on
the display.
Enter your passcode to stop the alarms. If the system is armed, stopping
silencing the alarm also stops the system.
The system shows Alarm Silenced, and the number and names of points
in alarm, in the order they occurred.

or

or

Use one of the commands:
For All On: [CMD][1]
For All On, Instant: [CMD][1][1]
For Part On, Instant: [CMD][2]
For Part On: [CMD][3]

Do one of the following:

Enter your passcode.

or

Use the menus:

• Press [CMD][8] to open the Main menu.

• For Turn Off: Go to [1] On/Off > [3] Off > [1] Off.

• For Turn Off Select: Go to [1] On/Off > [3] Off > [2] Off Select. Use

[NEXT] and [ENTER] to select the area to turn off.

Press [CMD][8], Go to [4] Users > [1] Change Passcode, and then
follow the prompts.

or

or

Use [CMD][8].
Go to [4] Users > [2] Add User.

6 | Alarms

4 | Change your passcode

5 | Edit users

5.2 | Edit Users

5.3 | Delete users

The menu options allow you to choose individual areas to turn on. Open
the All On or Part On menu, press [3] to open the Select menu, and
then use [NEXT] and [ENTER] to choose On Instant or On Delay and the
area to turn on.

7 | Shortcuts

5 .1 | Add users

You can change passcodes, and add, remove, and replace keyfobs and
cards (if supported by your security system).

Use [CMD][8].
Go to [4] Users > [3] Edit User.

or

Use [CMD][8] to open the Main menu.
Go to [4] Users > [4] Delete User.

Use the command:
[CMD][5][6]

Use the command:[CMD][5][3]

2 | Turn on (arm) your system

en User’s Quick Reference Guide

Basic Keypad

B915/B915I