Bosch B810K Specsheet

Intrusion Alarm Systems | RADION receiver SD

RADION receiver SD

www.boschsecurity.com

u Dual internal antennas provide spatial and polar RF

signal reception for high reliability

u Cover and wall tamper protection

RADION wireless from Bosch provides the range,
scalability and exceptional battery life required to
ensure reliable performance and superior quality.
Advanced diagnostics and multiple device enrollment
options make installation and maintenance simple and
cost effective. With a complete line of peripherals,
RADION provides the flexibility for virtually any
application requirement.

System overview

The B810 is a wireless receiver that connects RADION
wireless peripherals such as the motion and specialty
detectors, keyfobs, panic buttons, door window
contacts, repeaters, and more, to supported Bosch
control panels using the SDI2 Bus connection.
The receiver supports RF communication at 433.42
MHz This frequency features improved penetration,
reflection, and refraction of signal for superior range,
and reliability. The receiver also features dual
antennas to achieve spatial and polar diversity to
further improve RF communication reliability. Enclosed
within the receiver housing for higher security, the
receiver is equipped with tamper protection, and

u Multiple device enrollment options as well as RF

diagnostics ensure efficient and effective installation

u Supports supervision of wireless points (504),

keyfobs (1000), and repeaters (8)

u External status LEDs

detects and reports radio frequency interferences. The
receiver supports supervision of wireless points (504),
key fobs (1000), and repeaters (8).
The receiver can be easily accessed and configured for
a compatible control panel using the address switch
on the back of the receiver housing. The receiver
address switch provides a single-digit setting for the
receiver’s address, allowing for ease of installation.

Functions

The receiver uses the RADION wireless protocol which
supports:

• SDI2 bus communication

• Tamper input processing

• RF interference (jamming) detection and reporting

• Signal strength and margin reporting

• Enroll Device Database management

Address switch addressing

Use the address switch to easily assign a bus address
or setup during installation.

Easy installation

The sliding self-locking enclosure has an integrated
bubble level and a custom gap-free, lift gate style
terminal block to make installation easier, faster, and
more reliable.

2 | RADION receiver SD

LED display

The LED provides status and troubleshooting
information about the receiver and its connection.

RF interference (jamming) detection and reporting

The receiver detects and reports interference jamming
when the ambient noise level is above jamming
thresholds for a continuous period of 20 seconds.

Communications

RF packet information is received through the use of
two spatial and polar diversity antennas. The receiver
then transmits a 4-bit sequence of information back to
the control panel for status changes.

Wall and cover tamper switch

The receiver transmits a tamper signal when someone
removes the device from it’s base, or pulls it away
from the wall.

Certifications and approvals

Region Certification

Australia RCM

USA ANSI-

SIA

Europe CE EMC, LVD, R&TTE, RoHS

USA UL

UL UL 365 - Police Station Connected Bur-

UL UL 609 - Standard for Local Burglar

UL UL 636 - Holdup Alarm Units and Sys-

UL UL 1023 - Household Burglar Alarm Sys-

UL UL 1076 - Proprietary Burglar Alarm

UL UL 985 - Household Fire Warning Sys-

UL UL 1610 - Central Station Burglar Alarm

CSFM see our website

FCC Part 15 Class B

CP-01-2010-Control Panel Standard ­Features for False Alarm Reduction

glar Alarm Units

Alarm Units and Systems

tems

tem Units

Units and Systems

tem Units

Units

Installation/configuration notes

Mounting considerations

You can mount the wireless receiver in residential,
commercial or industrial locations in which a
compatible control panel is already installed. The
installation of the wireless receiver should be at a
distance no greater than 243 m (800 ft) from the
control panel.

Wiring considerations

The wireless receiver connects to a control panel using
the SDI2 connections (PWR, A, B, COM). Use
appropriate gauge wires from the receiver to the
control panel when connecting the wiring to the
terminal block of the receiver.

Compatibility

B9512G/B8512G
B6512/B5512/B4512/B3512
GV4 Series (D9412GV4, D7412GV4 v2.xx or higher)
control panels
RFDL-11-A motion detector
RFDW-SM-A standard door/window contact
RFDW-RM-A recessed door/window contact
RFRP-A repeater
RFPR-12-A motion detector
RFPR-C12-A motion detector (curtain)
RFUN-A universal transmitter
RFKF-FB-A 4-button keyfob
RFKF-TB-A 2-button keyfob
RFPB-TB-A 2-button panic
RFPB-SB-A single button panic
RFGB-A glass break

Parts included

Quantity Component

1 Wireless receiver

1 Hardware pack

1 Installation guide

Technical specifications

Properties

Dimensions 139.70 mm x 209.60 mm x 31.80 mm

(5.50 in x 8.25 in x 1.25 in)

Wiring distance 243 m (800 ft)

Wiring gauge 0.65 mm (22 AWG) to 2.0 mm (18 AWG)

Tamper detection Transmits a tamper switch signal when

the unit is removed from its base, or the
mounting surface.

Power

Power/voltage 10-14 VDC, 12 VDC nominal

Maximum current draw 70 mA

Frequency 433.42 MHz

Environmental Considerations

Operating Environment 0ﾟC to +49ﾟC (+32ﾟF to +120ﾟF )

Relative humidity Up to 93% non-condensing

Use Intended for indoor use.