D8004 |
Transformer Enclosure |
||
|
|
|
|
Installation Instructions |
|
||
1.0 |
Description |
4. Connect the isolated 110 VAC wiring to the |
|
The D8004 Transformer Enclosure protects the AC |
|||
duplex outlet. |
|||
plug-in transformer and ensures it remains securely |
5. Using two of the three supplied #6 machine |
||
fixed to the AC wall outlet. The D8004 might be |
|||
screws (along with nuts and lockwashers), mount |
|||
required for certain applications such as fire alarm |
|||
the top and bottom of the duplex outlet to the |
|||
installations. Consult your local Authority Having |
|||
cover plate. Then mount the cover plate to the |
|||
Jurisdiction (AHJ) for installation requirements. |
|||
gang box using the four supplied #10 screws. |
|||
|
|
||
2.0 |
Installation |
6. Energize the power to the circuit. Use a voltmeter |
|
to test the duplex outlet for proper voltage. |
|||
|
|
7. Remove a conduit knockout in the low voltage |
|
|
Remove AC power and lock out the circuit |
side of the gang box. Then run the low voltage |
|
|
|||
|
wiring through the knockout hole and into the |
||
|
breakers before installation. |
gang box, as required by the local AHJ, NFPA, |
|
|
|||
|
|||
|
|
and NEC. |
|
|
|
|
1.Mount the gang box to the wall or supporting structure.
2.Insert the gang box partition into the gang box, dividing the gang box into two sections. The larger section contains the high voltage wiring and the smaller contains the low voltage wiring.
3.Remove a conduit knockout in the high voltage section of the gang box. Then run the 110 VAC wiring through the knockout hole and into the gang box as required by the local AHJ, NFPA, and NEC.
8.Connect the low voltage wiring to the transformer.
9.Align the transformer mounting hole with the middle cover plate and duplex outlet mounting holes.
10.Using the third supplied #6 machine screw, attach the transformer to the cover plate and then to the duplex outlet.
11.Using the the four supplied #6 self-tapping screws, attach the cover to the cover plate.
Gang Box
|
|
|
Duplex Outlet |
|
|
Cover Plate |
#10 |
|
|
Screws |
|
|
|
|
|
|
|
|
Knockouts |
Cover |
Transformer |
|
High Voltage |
|
|
Section |
|
|
|
|
Partition |
|
|
|
Low Voltage |
#6 Self-tapping |
|
|
Section |
|
|
|
|
Screws |
|
|
|
|
|
#6 Machine |
|
|
|
|
Screws |
|
|
#10 |
|
|
|
Screws |
|
© 2006 Bosch Security Systems, Inc. |
36564D |
11/06 |
130 Perinton Parkway, Fairport, NY 14450-9199 USA |
Installation Instructions |
D8004 |
Customer Service: (800) 289-0096; Technical Support: (888) 886-6189 |
|
Page 2 of 2 |