Bosch AEC-AMC2-UL1 Installation Instructions

AMC UL1 Housing | en 1

Included Parts

The metal housing inlcudes the following components:

Figure 1 Parts of the housing

The accessories kit includes the following cables. Install these
cables as described in Section Connection of the Devices,
page 4.

Bosch Security Systems Assembly Instruction F.01U.024.980 | V.2 | 2006.08

2 en | AMC UL1 Housing

Figure 2 Accessories kit content

Content of the accessories kit:
A = Pre-assembled cable to connect the AMC to the power sup-

ply
B = Pre-assembled cable to connect the batteries to the UPS
(uninterruptable power supply) which is included in the power
supply

C = Cable using 24 V mode
D = Grounding cable for the cover
E = Cable ties to secure the pre-assembled cable
G = Pre-assembled cable with temperature sensor
H = Three screw anchors S8 and wood screws M6 x 50
J = Bracket for cable fixing

F.01U.024.980 | V.2 | 2006.08 Assembly Instruction Bosch Security Systems

AMC UL1 Housing | en 3

Mounting the Housing

Open the housing cover lock with the provided key and remove
the hood from the wall mounted frame.
Mount the metal housing at the desired position with the screw
anchors provided with the enclosure.
Use the screws (position H of the accessories kit) at the points
to mount the housing against the wall.

Figure 3 Demensions of the housing

Bosch Security Systems Assembly Instruction F.01U.024.980 | V.2 | 2006.08