Blaupunkt LONDON RDM 126 User Manual

Radio / CD
London RDM 126
Operating instructions
ENGLISH
1720 1819
16
15
FRANÇAIS
14
1
3
2
76
8
10
11945 12
13
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
3
Contents
Quick reference ............................ 33
Important notes ............................ 39
Precautions........................................... 39
Traffic safety ......................................... 39
Installation............................................. 39
Telephone mute.................................... 39
Sub Out................................................. 39
Accessories .......................................... 39
KeyCard theft protection
system........................................... 40
Putting the unit into operation .............. 40
Removing the KeyCard ........................ 40
“Training” a second KeyCard/
Replacing a KeyCard............................ 40
Displaying the radio pass data ............. 40
Short Additional Memory (S.A.M.)........ 41
Turn On Message (T.O.M.) .................. 41
Optical indication for extra security ...... 41
Care of your KeyCard........................... 41
Switching the audio source ........ 41
Radio operation with RDS ........... 42
AF - Alternative frequency.................... 42
REG - regional programme .................. 42
Selecting a waveband .......................... 42
Station tuning........................................ 42
Scrolling through the broadcasting
networks (only FM) ............................... 43
Changing the memory bank (FM)......... 43
Storing stations..................................... 43
Automatically storing the strongest sta-
tions with Travelstore............................ 44
Recalling stored stations ...................... 44
Scanning stored stations with
Preset Scan .......................................... 44
Scanning stations with Radio-Scan...... 44
Changing the scan time........................ 44
Selecting the seek tuning sensitivity .... 44
Switching from stereo to mono (FM) .... 45
PTY – Programme Type....................... 45
Programme type ................................... 45
Receiving traffic programme
stations with RDS-EON................ 47
Traffic announcement priority on/off .... 47
Warning beep ....................................... 48
Automatic seek tuning start .................. 48
Adjusting the volume for traffic announcements and the warning beep 48 Adjusting GEO for traffic messages
and the warning beep ........................... 48
Traffic Memo (TIM) ....................... 49
Warning ........................................... 49
Setting the clock in the DSC menu ...... 49
Programming the TIM standby mode /
TIM times .............................................. 49
Recalling stored traffic messages ........ 50
TIM standby mode while the radio is
switched off........................................... 50
Deactivating the TIM standby mode..... 50
Warning note ................................... 51
Temporarily interrupting the TIM standby mode (before driving into
a car wash) ........................................... 51
CD and CDC changer operation
(optional)....................................... 52
Switching to CD operation.................... 52
Inserting a CD....................................... 52
Removing a CD .................................... 52
Selecting a title ..................................... 52
MIX playback ........................................ 52
Switching to CDC operation53
Selecting CDs and titles ....................... 53
MIX playback ........................................ 53
Selecting the display mode .................. 53
Storing the display mode...................... 54
SCAN operation.................................... 54
TPM - Track Program Memory............. 54
Entering CD names .............................. 55
Deleting a CD name ............................. 56
Clearing TPM information and CD
names with DSC-UPDATE ................... 56
DSC programming ....................... 57
Overview of the DSC factory
settings.................................................. 59
Appendix....................................... 60
Specifications........................................ 60
32
Quick reference
1 Switching on/off with the ON button:
Press ON. When switching the set on with the ON button, the KeyCard has to be insert­ed. The unit will play with the pre-ad­justed volume.
Switching on/off with the KeyCard:
The set has to be turned on via the ON button.
Note: Read the information in chapter “Key­Card theft protection system”.
Switching on/off via the ignition:
When connected correspondingly, the set can also be turned on and off via the vehicle ignition. After the ignition has been switched off, a double beep tone will remind you that you should remove the KeyCard before leaving your vehicle.
Switching on with the ignition being switched off:
To keep on operating the set when the ignition is switched off (KeyCard is in­serted), proceed as follows: Press ON after the double beep tone. The unit will be turned on. To avoid that the battery goes flat, the system will be turned off automatically after a playback time of one hour.
2 VOL+ / VOL-
To alter the volume. Each time the set is switched on, it will play with the pre-adjusted volume (VOL FIX). You may also change the VOL FIX set­ting (see chapter “DSC programming”).
3
For instantly muting the volume. By pressing the
button the volume will be muted immediately. “MUTE” will appear in the display. The function is cancelled by pressing button
or VOL+. When pressing VOL-, the normal vol­ume will be by one grade lower than the mute volume.
To programme the mute volume level, proceed as follows:
Adjust the desired volume.
Press
for two seconds until you
hear a beep. Now this volume level is stored as your mute volume.
Extra function
Memory button in the DSC menu.
T
4 FM
Press repeatedly to switch between the FM memory banks I, II and T (Travelstore). When pressing this button, the system will automatically switch to FM.
Extra function FM
T
To store the six most powerful stations automatically with Travelstore: Press FMT until you hear a beep or “T-STORE” appears in the display. The storage process is finished when “T­STORE” disappears from the display.
5 M•L - toggle switch
To toggle between medium and long wave reception.
DEUTSCH
ENGLISH
FRANÇAIS
NEDERLANDS
SVENSKA
ESPAÑOL
33
PORTUGUÊS
6 Rocker switch
Radio operation
/ Station search
Up Down
<</>> Up/Down in short intervals when AF
is off
<</>> To scroll through the station net-
works when AF is on, e.g. NDR 1, 2, 3, 4, N-JOY, FFN,
ANTENNE ... .
CD operation
/ Title selection Up
Press once to go back to the be­ginning of the current title.
Fast advance, audible (CUE). Hold down as long as required.
Fast reverse, audible (REVIEW). Hold down as long as required.
Down
Changer operation (optional)
CD selection
Up Down
Title selection
Upwards: Press briefly. CUE - fast advance (audible):
Keep depressed. Downwards: Press as many times
as required.
To restart a title: Press briefly. REVIEW - fast reverse (audible):
Keep depressed.
Extra rocker switch functions:
Further setting functions with
AUD D GEO C DSC MODE B PTY >
Condition: The corresponding function has to be activated.
34
7 Display
a
d ke fg i h j
b
p
c
m) PTY - Programme type function n) MIX - CD playback in random or-
o) TPM - To select and store CD ti-
l
m
p) T5 - Track no. 5 is played back
der
tles
8 KeyCard theft protection system
n o
To operate the set it is necessary that the KeyCard is inserted.
This flashlight can be switched off by pushing in the tongue and lock.
9 SC/MIX
Radio operation
Scan
Press SC/MIX briefly – “FM SCAN” and the name of the scanned station will alternately appear
DEUTSCH
ENGLISH
FRANÇAIS
in the display. The unit will scan all sta-
KeyCard
tions which can be received.
a) NDR2 - Station name b) VIVALDI - CD name or c) 1 : 52 - CD time (playback time)
and number for changer op-
eration (optional) d) FM - Waveband e) 6 - Preset button (1-6) f) I, II, T - Memory bank I, II or Travel-
store g) CD-IN - A CD is inserted h) - Stereo i) lo - Seek tuning sensitivity j) AF - Alternative frequency for
RDS operation k) TA - Priority for traffic stations l) TP - A traffic station is being re-
ceived
For this purpose, introduce the Key­Card (with the contact area showing up) into the slot above the tongue sticking out of the unit. To remove the card, press first to un­lock. Read also the information in chapter “KeyCard theft protection system”.
Flashing KeyCard tongue
When the radio is turned off and the KeyCard removed, the KeyCard tongue can be programmed to flash for optical theft protection. For more information see chapter “DSC programming”.
Preset Scan
Press SC/MIX for approximately two seconds until you hear a beep. “SCAN” and the name of the scanned station will alternately appear in the display. The unit will scan all stations stored on the preset buttons. To stop Scan / Preset Scan: Press SC/MIX once again.
CD operation
MIX playback
The Mix function is switched on if “MIX” appears in the display. The CD tracks will be played at random. To switch Mix on and off: Press SC/MIX briefly.
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
35
CD-Scan
Press SC/MIX for approximately two seconds until you hear a beep. “CD-SCAN” appears in the display. The unit will scan all CD titles. To stop CD-Scan: Press SC/MIX once again.
Changer (CDC) operation (optional)
MIX CD
The CD titles will be played at random. The individual discs are selected in nu­meric order.
MIX MAG
The CD titles will be played at random. The individual discs are also selected in random order.
MIX OFF
The Mix function is deactivated. Press SC/MIX as many times until the
desired function briefly appears in the display.
CD-Scan
Press SC/MIX for approximately two seconds until you hear a beep. “CDC-SCAN” will appear in the dis­play. All CD titles will be scanned brief­ly.
To stop CD-Scan: Press SC/MIX once again.
: lo / CLR
Radio operation To switch the seek tuning sensitivity
level: Press button briefly. To switch between mono and stereo reception: Press button for approximately two seconds (beep). The stereo symbol mono playback.
CD and CDC operation (optional) To clear CD titles from the TPM mem-
ory.
; TPM
(Track Program Memory) To select and store titles during CD/ CDC playback. In each operating mode it is possible to manage a maxi­mum of 30 discs. Please refer to chap­ter “TPM programming”.
will disappear for
< TIM (Traffic Memo)
To play back the stored traffic an­nouncements: Press TIM briefly.
To switch the priority for traffic an­nouncements on and off: Press TIM for approximately two sec­onds.
When “TA” (traffic announcement) lights up in the display, the system will play traffic stations only.
= AF
Radio operation Alternative frequency during RDS op-
eration: When “AF” lights up in the display, the system will automatically seek a fre­quency offering better reception of the same RDS programme. AF on/off: Press AF briefly.
Regional function on/off: Press the AF button for approximately two seconds until you hear a beep. “REG-ON” or “REG-OFF” will appear in the display (see chapter REG - re­gional programme).
36
CD operation To switch between the name and time
(playback time) display modes: Press AF briefly.
CDC operation (optional) To switch between the name, time
(playback time) and number (CD number) display modes: Press AF briefly.
> PTY (Programme Type)
In the PTY mode, the preset buttons become programme type buttons. With each preset you can select one pro­gramme type, such as for example NEWS, SPORT, POP MUSIC, EDU­CATE, etc.
SRC
?
SRC (source) When having a CD inserted you can switch between the different audio sources radio, CD, and CDC/AUX (if activated).
(Eject)
Hold down the button for approximate­ly two seconds (beep) and the CD will eject.
@ 1, 2, 3, 4, 5, 6 - preset buttons
On FM, you can store six stations for each of the memory banks I, II and T. On MW/LW, you can store six stations each. To store a station: Press a preset button during radio operation and hold down until the set resumes play after the muting and you hear a beep. To recall a station: Select the desired waveband. On FM, adjust the corre­sponding memory bank and press the relevant preset button briefly.
Extra function preset buttons
To store and recall a PTY programme type. On FM, you can store and recall one programme type on/from each preset button when PTY is active (“PTY” lights up in the display).
A CD slot
When inserting a disc with the label side facing up, it will be pulled in auto­matically and transported to the play­back position. CD playback is adjusted automatically.
B DSC (Direct Software Control)
Use the DSC function to customise certain programmable, basic settings to suit your personal needs and prefer­ences. See chapter “DSC program­ming” for more information.
DEUTSCH
ENGLISH
FRANÇAIS
NEDERLANDS
SVENSKA
ESPAÑOL
37
PORTUGUÊS
C GEO
To adjust the balance (left/right) and fader (front/rear) with the rocker switch.
Fader front Fader rear Balance left Balance right
The last setting will be stored automat­ically. To switch off GEO: Press button once again. If the setting remains unchanged with­in four seconds, the display will switch back to the previous condition.
Extra function GEO
Separate balance and fader settings for traffic messages. See chapter “Ad­justing GEO for traffic messages and the warning beep”.
D AUD
To adjust the treble and bass frequen­cies with the rocker switch.
Treble + Treble – Bass – Bass +
The last setting will be stored automat­ically. To switch off AUD: Press button once again. If the setting remains unchanged with­in four seconds, the AUD setting will be terminated automatically.
Extra function AUD
Loudness: When listening at a low lev­el, the Loudness function will create a more natural sound by emphasising the low frequency range. To switch the Loudness on/off: Press the AUD button for approximate­ly two seconds until you hear a beep.
The Loudness function is active if “LD” appears in the display. For more information see chapter “DSC programming”.
38
Important notes
Precautions
Before starting to use your new car radio, please read the following information care­fully.
Traffic safety
As the driver of a motor vehicle, it is your responsibility to pay attention to the traffic situation at all times. Never use your car radio in a way that could distract you. Please keep in mind that you travel a dis­tance of 14 m per second at a speed of only 50 km/h. Should the traffic situation become particu­larly demanding, we advise you not to use the radio. Always make sure that you are still able to hear any warning signals coming from out­side of the vehicle, such as police or fire engine sirens, so that you can react accord­ingly. Therefore, you should always select a mod­erate volume for playing your car radio while you are driving.
Installation
If you would like to install your new car ster­eo yourself or add other audio components to existing ones, then please read carefully the enclosed instructions on installation and connection. In order to ensure that the set operates prop­erly it is necessary that the positive power supply line is connected via the ignition and the permanent +12 V lead. Do not ground the loudspeaker outputs!
Telephone mute
If you have a mobile telephone installed in your vehicle, radio or CD playback can be muted automatically when using the phone (telephone mute). “PHONE” will then appear in the display. When TA is active, traffic messages will al­ways have priority. The announcement will be aborted by pressing the TIM button.
Sub Out
Subwoofer pre-amp output for connection of an amplifier. Please refer to the installation instructions for more information.
Accessories
Use only the accessories and spare parts approved by Blaupunkt.
You can use the following Blaupunkt prod­ucts with this car stereo:
Changer
CDC A 05 or CDC F 05
Remote control
With the infrared remote control RC 05 you can control all of the important functions of your car hi-fi system from the steering wheel.
Amplifier
All Blaupunkt amplifiers
DEUTSCH
ENGLISH
FRANÇAIS
NEDERLANDS
SVENSKA
ESPAÑOL
39
PORTUGUÊS
Loading...
+ 22 hidden pages