Bissell PROHEAT2X 9400, PROHEAT2X 9200, PROHEAT2X 8930, PROHEAT2X 8960 User Manual

USER'S GUIDE
8920, 8930, 8960, 9200, 9300, 9400 SERIES
2
Thank You
3
Safety Instructions
4-5
Product View
Earn BISSELL Rewards!
Register your
product today!
See details on
back page
6
7-16
17-19
20
21
22
23
24
24
Assembly
Maintenance and Care
Troubleshooting
Replacement Parts
Accessories
Warranty
Product Registration
Consumer Services
Thanks for buying a BISSELL Deep Cleaner
We’re glad you purchased a BISSELL deep cleaner. Everything we know about floor care went into the design and construction of this complete, high-tech home cleaning system.
Your BISSELL deep cleaner is well made, and we back it with a limited two year warranty. We also stand behind it with a knowledgeable, dedicated Consumer Services department, so, should you ever have a problem, you’ll receive fast, considerate assistance.
My great-grandfather invented the floor sweeper in 1876. Today, BISSELL is a global leader in the design, manufacture, and service of high quality homecare products like your deep cleaner.
Thanks again, from all of us at BISSELL.
Mark J. Bissell Chairman, President & CEO
2
www.bissell.com 800.237.7691
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical should be observed, including the following:
READ ALL INSTRUCTIONS BEFORE USING YOUR DEEP CLEANER.
appliance, basic precautions
Be extra careful when cleaning stairs.
Close attention is necessary when used by or near children.
Always install float before any wet pick up operation.
SAVE THESE
WARNING:
To reduce the risk of fire, electric shock, or injury:
Do not immerse.
Use only on dry surfaces or surfaces moistened by the cleaning
process.
Always connect to a properly grounded outlet.
See Grounding Instructions.
Unplug from outlet when not in use and before conducting
maintenance or troubleshooting.
Do not leave machine when it is plugged in.
Do not service machine when it is plugged in.
Do not use with damaged cord or plug.
If appliance is not working as it should, has been dropped,
damaged, left outdoors, or dropped into water, have it repaired at an authorized Service Center.
Use indoors only.
Do not pull or carry by cord, use cord as a handle, close door on
cord, pull cord around sharp corners or edges, run appliance over cord, or expose cord to heated surfaces.
Unplug by grasping the plug, not the cord.
Do not handle plug or appliance with wet hands.
Do not put any object into appliance openings, use with blocked opening, or
restrict air flow.
Do not expose hair, loose clothing, fingers or body parts to
openings or moving parts.
Do not pick up hot or burning objects.
Do not pick up flammable or combustible materials (lighter fluid, gaso-
line, kerosene, etc.) or use in the presence of explosive liquids or vapor.
Do not use appliance in an enclosed space filled with vapors
given off by oil base paint, paint thinner, some moth proofing substances, flammable dust, or other explosive or toxic vapors.
Do not pick up toxic material (chlorine bleach, ammonia, drain
cleaner, gasoline, etc.).
Do not modify the 3-prong grounded plug.
Do not allow to be used as a toy.
Do not use for any purpose other than described in this User’s Guide.
Do not unplug by pulling on the cord.
Use only manufacturer’s recommended attachments.
Use only cleaning products formulated by BISSELL for use in this
appliance to prevent internal component damage. See the cleaning fluid section of this guide.
Keep openings free of dust, lint, hair, etc.
Do not point attachment nozzle at people or animals
Keep appliance on a level surface.
Turn off all controls before unplugging.
Unplug before attaching the TurboBrush®.
www.bissell.com 800.237.7691
INSTRUCTIONS.
THIS MODEL IS FOR HOUSEHOLD USE ONLY.
GROUNDING INSTRUCTIONS
This appliance must be connected to a grounded wiring system. If it should malfunction or break down, grounding provides a safe path of least resistance for electrical current, reducing the risk of electrical shock. The cord for this appli­ance has an equipment-grounding con­ductor and a grounding plug. It must only be plugged into an outlet that is properly installed and grounded in accordance with all local codes and ordinances.
Grounded
Outlets
Grounding Pin
WARNING:
Improper connection of the equipment­grounding conductor can result in a risk of electrical shock. Check with a qualified electrician or service person if you aren’t sure if the outlet is properly grounded. DO NOT MODIFY THE PLUG. If it will not fit the outlet, have a proper outlet installed by a qualified electrician. This appliance is designed for use on a nomi­nal 120-volt circuit, and has a grounding attachment plug that looks like the plug in the drawing above. Make certain that the appliance is connected to an outlet hav­ing the same configuration as the plug. No plug adapter should be used with this appliance.
3
Product view
Spray Trigger
Power Switch
Extra Long Power Cord
Heat Indicator Light
Tank Carry Handle
ReadyTools™ Dial
Heater Switch
Flex Hose
Upper Handle
Easy Carry Handle
2-in-1 Water Tank
Lower Base
Edge Sweep
Easy To Remove Nozzle
4
www.bissell.com 800.237.7691
Brushes
®
Product view
Spray Trigger
Upper Hose Rack
Hose secure Latch
Crevice Tool Holder (select models only)
Lower Hose Rack
Custom Clean
®
Dial
WARNING:
Recline Pedal
Formula Tank
Cleaning fluid
Keep plenty of genuine BISSELL 2X formula on hand so you can clean and protect whenever it fits your schedule. Always use genuine BISSELL deep cleaning formulas. Non-BISSELL cleaning solutions may harm the machine and will void the warranty.
To reduce the risk of fire and electric shock due to internal component damage, use only BISSELL cleaning fluids intended for use with the deep cleaner.
BISSELL 2X Professional Deep Cleaning Formula with Scotchgard™ Protection
www.bissell.com 800.237.7691
BISSELL 2X Pet Stain and Odor Formula with Scotchgard™ Protection
BISSELL 2X Fiber Cleansing Formula with Scotchgard™ Protection
BISSELL 2X Allergen Cleansing Formula
BISSELL 2X Natural Orange Formula
BISSELL 2X Lavender Essence Formula
BISSELL 2X Hard Floor Solutions Formula
BISSELL Tough Stain PreCleaner
5
Assembly
Your PROheat 2X comes in three, easy to assemble components:
Upper Handle Lower Handle Tool Caddy
The only thing you will need to assemble your cleaner is a Phillips head screwdriver.
1. Slide upper handle onto lower handle.
2. Screw 3 screws into the marked holes.
3. Place upper hose rack onto back of
upper handle, and secure with screw.
4. Place lower hose rack onto back of
upper handle by pushing in and sliding down until it snaps into place.
5. Snap tools into the tool caddy.
6. Wrap power cord and flex hose.
7. Keep flex hose snugly in place by using
the hose secure latch.
PROheat 2X assembly is now
complete.
7.
1.
3.
2.
4.
Hose Secure Latch
6
www.bissell.com 800.237.7691
Operations
Special features
Your BISSELL PROheat 2X deep cleaner is a home cleaning system that uses the power of heat, brushes and clean­ing formula to get the deep down dirt for a maximum clean. Not only does it come with several unique features, it has been designed with you, the customer, in mind.
Built-in-heater feature
BISSELL PROheat 2X models all feature a patented built-in heater which will heat the hot tap water you put in up to 25 degrees hotter to safely optimize clean­ing effectiveness. The heater will never allow the temperature to exceed 190 degrees. The heater switch on the front of the machine controls the heater so you have the option to turn off the heat if you are cleaning delicate wool or ori­ental rugs.
2-in-1 water tank
Our 2-in-1 water tank full capacity system is designed with a heavy duty bladder inside for clean water. As you clean, the clean water in the bladder will empty and mix with the cleaning formula. Dirty water pulled out of your carpets will collect around the outside of the bladder so that clean and dirty water are always kept separate. This allows the user to only carry one tank to and from the sink for emptying and filling.
WARNING:
Do not plug in your cleaner until you have completely assembled it per the above instructions and are familiar with all instructions and operat­ing procedures.
www.bissell.com 800.237.7691
7
Operations
B R U SH
S U C TIO
N
1
START
HERE
4’
2
3
4
8
7
6
5
9
10
11
12
3’
ReadyTools™ dial
This provides either floor cleaning or above floor cleaning with the turn of a knob. Choose "TOOLS" setting for stairs, upholstery and hard to reach areas and "FLOOR CLEANING" for carpets, area rugs and bare floors.
Before you clean
1. Move furniture to another area if clean-
ing an entire room (optional).
2. Pick up all loose dirt, debris, and pet hair
before deep cleaning. If you're clean­ing just a small area of carpeting or less than a whole room, the ProHeat 2X Deep Cleaner may be used to vacuum the area before deep cleaning. If so, be sure to keep the red filter screen (in the 2-in-1 tank lid) cleaned of lint so that suction is main­tained. When you're done, clear the red filter screen and then rinse both the dirty water and the clean solution tank (inside the flexible bladder) with warm water before starting the deep cleaning process.
3. Plan your cleaning route to leave an exit
path. It is best to begin cleaning in the corner farthest from your exit.
ATTENTION:
Some Berber carpets have a tendency to fuzz with wear. Repeated strokes in the same area with an ordinary vacuum or deep cleaner may aggra­vate this condition. Please see Stain Removal instructions on page 14.
8
www.bissell.com 800.237.7691
Loading...
+ 16 hidden pages