This equipment has been tested and found to comply with the limits of a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. There is no guarantee that interference will not occur in a
particular installation.
The vendor makes no representations or warranties with respect to the
contents here of and specially disclaims any implied warranties of
merchantability or fitness for any purpose. Further the vendor reserves the
right to revise this publication and to make changes to the contents here of
without obligation to notify any party beforehand.
Duplication of this publication, in part or in whole is not allowed without
first obtaining the vendor’s approval in writing.
The content of this user’s is subject to be changed without notice and we
will not be responsible for any mistakes found in this user’s manual. All the
brand and product names are trademarks of their respective companies.
Complies with PC ATX form factor specifications.
Supports popular operating systems such as Windows NT, Windows 2000,
Windows ME, Windows XP, LINUX and SCO UNIX.
(Socket 478) processor up to 2.4 GHz.
Package contents
HDD Cable X 1, FDD Cable X 1, Fully Setup Driver CD X 1
Flash Memory Writer for BIOS update X 1
USB Cable X 2 (Optional)
Rear I/O Panel for ATX Case X 1 (Optional)
1
M
o
t
h
e
r
M
M
b
o
t
h
e
r
b
o
t
h
e
r
b
Layout of P4TDK
JKBMS1
K/B
&
Mouse
USB & LAN
JCOM1
COM1
COM1COM1COM2
JPRNT1
JATXPWR2
JRJ45USB1
o
o
o
a
r
a
r
a
Socket 478
d
D
e
s
c
r
i
p
t
i
o
n
d
D
e
s
c
r
r
d
D
i
e
s
c
r
p
i
p
t
i
t
i
JCFAN1
o
n
o
n
Parallel Port
JCOM2
SP-OUTMIC-IN
USBUSB
LINE-IN
GAME Por t
JGAME_U SB1
JAUDIO1
JCDIN2
JTAD1
Winbond
I/O
JCDIN1
CNR1
LAN
CHIP
WOL1
INTEL
82845E
PCI1
PCI2
PCI3
PCI4
PCI5
PCI6
AGP1
FWH
BIOS
INTEL
82801DB
(ICH4)
1394
CHIP
JUSB2JUSB3
JCMOS1
DDR1
DDR1
DDR2
DDR2
JDIMMVOLT
JMS1
JSD1
DDR1
DDR3
DDR2
DDR4
JPANEL1
JAUXPWR1
JATXPWR1
BAT1
IDE2
IDE1
FDD1
JSC1
JSFAN1
2
M
o
t
h
M
o
t
h
M
o
t
h
CPU Installation
e
r
b
o
a
r
d
D
e
s
c
r
i
p
t
i
o
n
e
r
b
o
a
r
d
D
e
s
c
r
e
r
b
o
a
r
d
D
i
e
s
c
r
p
t
i
o
n
i
p
t
i
o
n
1. Pull the lever sideways away from the socket then raise the lever up
to 90-degree angle.
2. Locate Pin A in the socket and lock for the white dot or cut edge in
the CPU. Match Pin A with the white dot/cut edge then insert the
CPU.
3. Press the lever down. Then Put the fan on the CPU and buckle it
and put the fan’s power port into the JCFAN1, then to complete the
installation.
C
P
U
CPU/ System Fan Headers: JCFAN1/ JSFAN1
Ground
1
12V
Sense
Sense
12V
1
Ground
JCFAN1
JSFAN1
3
M
o
t
h
e
r
b
o
a
r
d
D
e
s
c
r
i
p
t
i
o
n
M
M
o
t
h
e
r
b
o
a
r
d
D
e
s
c
r
o
t
h
e
r
b
o
a
r
d
D
i
e
s
c
r
p
t
i
o
n
i
p
t
i
o
n
DDR DIMM Modules: DDR1-4
DRAM Access Time: 2.5V Unbuffered DDR 200/266 MHz Type
required.
DRAM Type: 128MB/ 256MB/ 512MB DIMM Module (184 pin)
Due to the limitation of chipset, this board only can support up to 2 banks
of DDR memory.
However, in the market, there are so many single-sided modules
occuping half bank. BIOSTAR would like to utilize the modules as many
as possible. So we divide each bank into 2 sockets. That means any
bank just can support one double-sided or two single-sided modules
only.
DDR1 & 2 => Bank 0, DDR3 & 4 => Bank 1.
Each Bank 0 and 1, contain 2 DDR sockets, one white & one blue.
Bank 0
Bank 1
※ If you have one DDR module and you are not sure if it is a
※ If you have two DDR modules and you are not sure if they are
※ DDR 2 and 4, white color sockets, only support single-sided
DDR1
DDR2
DDR3
DDR4
single or double- sided DDR module, please insert in DDR1
(blue color) socket first.
single or double-sided DDR modules, please insert in DDR1
and 3 (blue color) Sockets.
DDR module.
; For better compatibility, before insert DDR modules into the
sockets, we strongly suggest to use the same type of modules
including the model, speed and size of memory.
4
M
o
t
h
e
r
b
o
a
r
d
D
e
s
c
r
i
p
t
i
o
n
M
M
o
t
h
e
r
b
o
a
r
d
D
e
s
c
r
o
t
h
e
r
b
o
a
r
d
D
i
e
s
c
r
p
t
i
o
n
i
p
t
i
o
n
Jumpers, Headers, Connectors & Slots
Hard Disk Connectors: IDE1/ IDE2
The motherboard has a 32-bit Enhanced PCI IDE Controller that
provides PIO Mode 0~4, Bus Master, and Ultra DMA / 33/ 66/ 100
functionality. It has two HDD connectors IDE1 (primary) and IDE2
(secondary).
The IDE connectors can connect a master and a slave drive, so you can
connect up to four hard disk drives. The first hard drive should always be
connected to IDE1.
Floppy Disk Connector: FDD1
The motherboard provides a standard floppy disk connector that
supports 360K, 720K, 1.2M, 1.44M and 2.88M floppy disk types. This
connector supports the provided floppy drive ribbon cables.
Accelerated Graphics Port Slot: AGP1
Your monitor will attach directly to that video card. This motherboard
supports video cards for PCI slots, but it is also equipped with an
Accelerated Graphics Port (AGP). An AGP card will take advantage of
AGP technology for improved video efficiency and performance,
especially with 3D graphics.
Communication Network Riser Slot: CNR1
The CNR specification is an open Industry Standard Architecture, and it
defines a hardware scalable riser card interface, which supports audio,
network and modem only.
Peripheral Component Interconnect Slots: PCI1-6
This motherboard is equipped with 6 standard PCI slots. PCI stands for
Peripheral Component Interconnect, and it is a bus standard for
expansion cards, which has, supplanted the older ISA bus standard in
most ports. This PCI slot is designated as 32 bits.
5
Loading...
+ 14 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.