Bionaire BCH9212 Instruction Manual

0 (0)
WA R RA NT Y I N FO RM AT I ON
D IA GN O ST IC O D E PR OB LE M AS
In Canada If you have any question regarding this warranty or would like to obtain warranty service, please call 1-800-253-2764 and a convenient service center address will be provided to you.
In the U.S.A., this warranty is offered by Sunbeam Products, Inc. doing business as Jarden Consumer Solutions located in Boca Raton, Florida 33431. In Canada, this warranty is offered by Sunbeam Corporation (Canada) Limited doing business as Jarden Consumer Solutions, located at 20 B Hereford Street, Brampton, Ontario L6Y 0M1. If you have any other problem or claim in connection with this product, please write our Consumer Service Department. PLEASE DO
NOT RETURN THIS PRODUCT TO ANY OF THESE ADDRESSES OR TO THE PLACE OF PURCHASE.
GARANTÍA LIMITADA DE 1 AÑO
Sunbeam Products, Inc. operando bajo el nombre de Jarden Consumer Solutions, o en Canadá, Sunbeam Corporation (Canada) Limited operando bajo el nombre de Jarden Consumer Solutions, (en forma conjunta, “JCS”), garantiza que por un período de uno año a partir de la fecha de compra, este producto estará libre de defectos de materiales y
mano de obra. JCS, a su elección, reparará o reemplazará este producto o cualquier componente del mismo que
presente defectos durante el período de garantía. El reemplazo se realizará por un producto o componente nuevo o reparado. Si el producto ya no estuviera disponible, se lo reemplazará por un producto similar de valor igual o superior. Ésta es su garantía exclusiva. No intente reparar o ajustar ninguna función eléctrica o mecánica de este producto. Al hacerlo elimínará ésta garantía. La garantía es válida para el comprador minorista original a partir de la fecha de compra inicial y la misma no es transferible. Conserve el recibo de compra original. Para solicitar servicio en garantía se requiere presentar un recibo de compra. Los agentes y centros de servicio de JCS o las tiendas minoristas que venden productos de JCS no tienen derecho a alterar, modificar ni cambiar de ningún otro modo los términos y las condiciones de esta garantía. Esta garantía no cubre el desgaste normal de las piezas ni los daños que se produzcan como resultado de uso negligente o mal uso del producto, uso de voltaje incorrecto o corriente inapropiada, uso contrario a las instrucciones operativas, y desarme, reparación o alteración por parte de un tercero ajeno a JCS o a un Centro de Servicio autorizado por JCS. Asimismo, la garantía no cubre actos fortuitos tales como incendios, inundaciones, huracanes y tornados.
¿Cuál es el límite de responsabilidad de JCS?
JCS no será responsable de daños incidentales o emergentes causados por el incumplimiento de alguna garantía o condición expresa, implícita o legal. Excepto en la medida en que lo prohíba la ley aplicable, cualquier garantía o condición implícita de comerciabilidad o aptitud para un fin determinado se limita, en cuanto a su duración, al plazo de la garantía antes mencionada. JCS queda exenta de toda otra garantías, condiciones o manifestaciones, expresa, implícita, legal o de cualquier otra naturaleza. JCS no será responsable de ningún tipo de daño que resulte de la compra, uso o mal uso del producto, o por la imposibilidad de usar el producto, incluidos los daños incidentales, especiales, emergentes o similares, o la pérdida de ganancias, ni de ningún incumplimiento contractual, sea de una obligación esencial o de otra naturaleza, ni de ningún reclamo iniciado contra el comprador por un tercero. Algunas provincias, estados o jurisdicciones no permiten la exclusión o limitación de los daños incidentales o emergentes ni las limitaciones a la duración de las garantías implícitas, de modo que es posible que la exclusión o las limitaciones antes mencionadas no se apliquen en su caso. Esta garantía le otorga derechos legales específicos y es posible que usted tenga otros derechos que varían de un estado, provincia o jurisdicción a otro.
Cómo solicitar el servicio en garantía
En los Estados Unidos Si tiene alguna pregunta sobre esta garantía o desea recibir servicio de garantía, llame al 1-800-253-2764 y podrá obtener la dirección del centro de servicio que le resulte más conveniente. En Canadá Si tiene alguna pregunta sobre esta garantía o desea recibir servicio de garantía, llame al 1-800-253-2764 y podrá obtener la dirección del centro de servicio que le resulte más conveniente. En los Estados Unidos, esta garantía es ofrecida por Sunbeam Products, Inc. operando bajo el nombre de Jarden Consumer Solutions, Boca Ratón, Florida 33431. En Canadá, esta garantía es ofrecida por Sunbeam Corporation (Canada) Limited operando bajo el nombre de Jarden Consumer Solutions, 20 B Hereford Street, Brampton, Ontario L6Y 0M1. Si usted tiene otro problema o reclamo en conexión con este producto, por favor escriba al Departamento de Servicio al Consumidor. POR FAVOR NO DEVUELVA ESTE PRODUCTO A NINGUNA DE ESTAS
DIRECCIONES NI AL LUGAR DE COMPRA.
T RO UB L ES HO OT IN G
D IA GN O ST IC O D E PR OB LE M AS
WA R RA NT Y I N FO RM AT I ONT RO UB L ES HO OT IN G
I NF OR M AC IO N D E LA G AR AN TI A
D IA GN O ST IC O D E PR OB LE M AS
DIAGNOSTICO DE PROBLEMAS
Información general:
Factores medioambientales: Hay muchos factores que afectarán su nivel de confort deseado. Estos factores pueden incluir el aislamiento, puertas y ventanas abiertas o con corriente de aire, y la temperatura exterior. Haga una revisión y realice las acciones necesarias si alguno de estos problemas potenciales afectan la capacidad del calefactor para calentar adecuadamente la habitación. Calor complementario: Los calefactores eléctricos portátiles están diseñados para brindar calefacción complementaria a las habitaciones, para calentar la habitación en la que usted se encuentra y bajar el termostato de la central de calefacción. No están diseñados para sustituir los sistemas centrales de calefacción.
NO trate de reparar ni ajustar ninguna de las funciones eléctricas o mecánicas de este calefactor. Si lo hace, la garantía quedará anulada. El interior del calefactor no tiene piezas que el usuario pueda reparar. Las reparaciones sólo deberán ser realizadas por personal capacitado.
Si tiene preguntas relacionadas con este producto o si está interesado en conocer otros productos Bionaire®, póngase en contacto con nuestro Departamento de Servicio al Cliente: llame al 1-800-253-2764 o visite nuestro sitio web www.bionaire.com.
Solución de problemas del calefactor
Problema Posible Causa Solución
• El círculo luminoso de encendido está destellando o, a veces, el calefactor se enciende en la posición de máximo calor, pero después se apaga en 2 segundos mientras el círculo luminoso de encendido se encuentra destellando.
El sistema de apagado automático se
encuentra activado en caso de un sobrecalentamiento potencial.
El interruptor contra inclinaciones está
activado.
Siga las instrucciones de apagado de seguridad
automático para reestablecer el calefactor y brindarle al calefactor suficiente tiempo para que se enfríe antes de enchufarlo de nuevo.
Coloque el calefactor en posición vertical sobre una
superficie nivelada.
• No hay suficiente calefacción.
El calefactor está en la posición de
calor bajo.
El termostato está en un valor bajo.
Cambie la posición a máximo calor. Gire la rueda indicadora hacia la derecha hasta
llegar a la configuración de temperatura más alta.
• El calefactor se enciende y apaga con frecuencia.
El termostato automáticamente enciende
y apaga el calefactor a fin de mantener el nivel de confort seleccionado.
Cada 10 o 15 minutos, el calefactor se
enciende y funciona durante un minuto.
Para que esto ocurra con menos frecuencia, gire la
perilla con dial en el sentido de las agujas del reloj hacia la posición de máximo calor.
Se trata del funcionamiento normal para asegurar que el
calefactor está manteniendo la temperatura ambiente con precisión.
• El control remoto no funciona.
Tiene poca batería.Está demasiado lejos.
El visor del panel de control está sucio.
Cambie la batería (tipo de descripción, 3 voltios, CR2025). El control remoto funciona hasta 20 pies (6m).Asegúrese de apuntar el control remoto al panel de
control del calefactor y de que no haya ningún obstáculo.
Asegúrese de que el visor esté limpio.
• El calefactor sopla aire frío.
Cuando el calefactor se encuentra en
modo Termostato y alcanza la temperatura establecida, se enfriará automáticamente durante 15 segundos (sopla aire frío) para asegurar la precisión del termostato.
La unidad se encuentra en la
posición Ventilador únicamente.
Es posible que el botón de
encendido se haya presionado para apagar el calefactor.
Aumente la temperatura o cambie la posición a Eco-
SmartTM o Máximo.
Presione el botón de Máximo calor o Eco-SmartTM.
Presione el botón de encendido para encender el
calefactor.
Solución de problemas del calefactor
Problema Posible Causa Solución
• La velocidad del ventilador no cambia.
Las posiciones de Máximo calor y Eco-
SmartTM controlan la salida de calor del calefactor y no controlan la velocidad del ventilador. El ventilador funciona a la misma velocidad en todas las opciones.
Haga funcionar el calefactor en la posición de
Máximo calor para generar la salida de máximo calor.
• Ruido inesperado.
Es posible que se escuchen chasquidos
o crujidos cuando el calefactor se calienta. Esto es parte del funcionamiento normal y seguro. Una vez que el calefactor se caliente, los crujidos cesarán.
Si el ruido persiste, llame a Bionaire al
1-800-253-2764.
• Olor inesperado.
Es posible que el calefactor
produzca olores o vapores la primera vez que lo utilice o después de haber estado almacenado una temporada.
Esto es normal y es el resultado del polvo u otros
residuos que se acumulan en el dispositivo de calefacción. Asegúrese de que el calefactor se encuentre en un área ventilada y que siga funcionando hasta que el olor o vapor desaparezcan
.
© 2012 Sunbeam Products, Inc. operando bajo el nombre de Jarden Consumer Solutions. Todos los derechos reservados. Distribuido por Sunbeam Products, Inc. operando bajo el nombre de Jarden Consumer Solutions, Boca Raton, Florida 33431.
157375/9100020013671 BCH9212-UM_12ESM1 Impreso en China GCDS-BIO24504-JC
pure indoor living
Instruction Manual
Manual de Instrucciones
Questions? Comments? Call 1-800-253-2764 in North America.
¿Preguntas? ¿Comentarios? Llame al 1-800-253-2764 en Norteamérica.
NOTE: A Phillips screwdriver is required for assembly.
NOTA: Se requiere un desarmador Phillips para el montaje.
BIONAIRE
®
HEATER CALEFACTOR
MODEL/
MODELO:
BCH9212
TROUBLE SHOOTING
General Information:
Environmental Factors - There are a number of factors that will affect your desired comfort level. These factors can include insulation, open or drafty doors and windows, and outside temperature. Please check and take action if any of these potential problems are affecting your heaters ability to adequately warm your room. Supplemental Heat - Portable electric heaters are intended for supplemental heating of rooms to heat the room you are in and turn down the central heat thermostat. They are not intended to replace central heating systems.
Do NOT attempt to repair or adjust any electrical or mechanical functions on this heater. Doing so will void warranty. The inside of the heater contains no user serviceable parts. All servicing should be performed by qualified personnel only.
Troubleshooting for your Heater
Trouble Probable Cause Solution
• Heater Does Not Turn On.
Timer Activated. Tip-over switch engaged. Manual user reset is activated. Not plugged in properly.
Electrical outlet does not hold plug in
securely.
Thermostat set too low.
Obstruction causing the heater not to
operate.
Circuit breaker trips.
Press the Power Button to Turn on the Heater. Set heater upright on a level surface. Follow reset instructions listed in this manual. Ensure plug is properly inserted. Make sure electrical
outlet and circuit breaker are working.
Have outlet replaced by a licensed electrician.
Turn the Dial Wheel right to the highest temperature
setting.
Unplug the heater and remove all obstructions.
Position your heater 36 inches (91cm) away from all objects.
Make sure no other high wattage appliances are
operating on the same circuit and reset breaker if needed.
• Power Light is Flashing or in some cases, Heater Turns On at Max Heat setting but then Shuts Off in 2 seconds with Power Light Flashing.
Auto Safety Shut-off system is
activated when there is potential overheat.
Tip-over switch engaged.
Follow Auto Safety Shut-off instructions to reset the
heater and allow sufficient time for the heater to cool down before plugging in again.
Set heater upright on a level surface.
If you have any questions regarding your product or would like to learn more about other Bionaire® products, please contact our Consumer Service Department at 1-800-253-2764 or visit our website at www.bionaire.com.
Troubleshooting for your Heater
Trouble Probable Cause Solution
• Not Enough Heat.
Heater is in Low Heat setting. Thermostat set too low.
Change setting to Max Heat. Turn the Dial Wheel right to the highest temperature
setting.
• Heater cycles ON and OFF frequently.
The thermostat automatically turns
the heater on and off to maintain selected comfort level.
Every 10-15 minute the heater turns
on and runs for a minute.
To make this occur less frequently turn the Dial
Wheel right to the highest setting.
This is normal operation to ensure the heater is
maintaining the room temp accurately.
• Remote Does not work.
Battery low. Distance too far.
Control Panel Display dirty.
Change battery (Disc type, 3 volt, CR2025). Remote works up to 20 feet (6m). Be sure to point remote at control panel on heater
and there are no obstructions.
Make sure display panel is clean.
• Heater is Blowing Cold Air.
When the heater is in Thermostat
Mode and reaches the set temperature it will automatically perform a 15 second cool down (blowing cold air) to ensure thermostat accuracy.
Unit is in the Fan Only setting. Power Button may have been pressed
to turn off the heater.
Raise the temperature higher or change setting to
Eco-SmartTM or Max heat.
Press the Max Heat or Eco-SmartTM Buttons. ✔ Press the Power Button to turn on the heater.
• Fan Speed Doesn't Change.
Max Heat and Eco-SmartTM settings
control the heat output of the heater and not the fan speed. Fan runs at the same speed on all settings.
Run heater in Max Heat for maximum heat output.
• Unexpected Noise.
You may hear a popping or crackling
sound as the heater heats up. This is normal and safe operation. Once the heater heats up, the crackling sound will go away.
If the noise persists, call Bionaire at
1-800-253-2764.
• Unexpected Smell.
There may be an odor or vapor
coming from the heater the first time you use it or after prolonged or seasonal storage.
This is normal and is the result of dust or other debris
accumulating on the heating element. Make sure the heater is in a well ventilated area and continue running until the odor or vapor goes away.
1 YEAR LIMITED WARRANTY
Sunbeam Products, Inc. doing business as Jarden Consumer Solutions or if in Canada, Sunbeam Corporation (Canada) Limited doing business as Jarden Consumer Solutions (collectively “JCS”) warrants that for a period of one year from the date of purchase, this product will be free from defects in material and workmanship. JCS, at its option, will repair or replace this product or any component of the product found to be defective during the warranty period. Replacement will be made with a new or remanufactured product or component. If the product is no longer available, replacement may be made with a similar product of equal or greater value. This is your exclusive warranty. Do NOT attempt to repair or adjust any electrical or mechanical functions on this product. Doing so will void this warranty. This warranty is valid for the original retail purchaser from the date of initial retail purchase and is not transferable. Keep the original sales receipt. Proof of purchase is required to obtain warranty performance. JCS dealers, service centers, or retail stores selling JCS products do not have the right to alter, modify or any way change the terms and conditions of this warranty. This warranty does not cover normal wear of parts or damage resulting from any of the following: negligent use or misuse of the product, use on improper voltage or current, use contrar y to the operating instructions, disassembly, repair or alteration by anyone other than JCS or an authorized JCS service center. Further, the warranty does not cover: Acts of God, such as fire, flood, hurricanes and tornadoes.
What are the limits on JCS’s Liability?
JCS shall not be liable for any incidental or consequential damages caused by the breach of any express, implied or statutory warranty or condition. Except to the extent prohibited by applicable law, any implied warranty or condition of merchantability or fitness for a particular purpose is limited in duration to the duration of the above warranty. JCS disclaims all other warranties, conditions or representations, express, implied, statutory or otherwise. JCS shall not be liable for any damages of any kind resulting from the purchase, use or misuse of, or inability to use the product including incidental, special, consequential or similar damages or loss of profits, or for any breach of contract, fundamental or otherwise, or for any claim brought against purchaser by any other party. Some provinces, states or jurisdictions do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts, so the above limitations or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have other rights that vary from province to province, state to state or jurisdiction to jurisdiction.
How to Obtain Warranty Service
In the U.S.A. If you have any question regarding this warranty or would like to obtain warranty service, please call 1-800-253-2764 and a convenient service center address will be provided to you.
© 2012 Sunbeam Products, Inc. doing business as Jarden Consumer Solutions. All Rights Reserved. Distributed by Sunbeam Products, Inc. doing business as Jarden Consumer Solutions, Boca Raton, Florida 33431.
Solución de problemas del calefactor
Problema Posible Causa Solución
• El calefactor no enciende.
El temporizador se encuentra
activado.
El interruptor contra inclinaciones está
activado.
El restablecimiento manual de
usuario está activado.
No está conectado correctamente.
El tomacorriente no sostiene el
enchufe de manera segura.
El termostato está en un valor
demasiado bajo.
Hay obstrucciones que hacen que el
calefactor no funcione.
El interruptor de circuito está
desactivado.
Presione el botón de encendido para encender el
calefactor.
Coloque el calefactor en posición vertical sobre una
superficie nivelada.
Siga las instrucciones de restablecimiento que
aparecen en este manual.
Compruebe que el enchufe esté insertado
correctamente. Asegúrese de que el tomacorriente y el interruptor de circuito funcionen.
Contrate a un eléctrico con licencia para reemplazar
el tomacorriente.
Gire la rueda indicadora hacia la derecha hasta
llegar a la configuración de temperatura más alta.
Desconecte el calefactor y retire las obstrucciones. Coloque
el calefactor a 91 cm de distancia de los demás objetos.
Compruebe que no haya otros aparatos de alto
vataje funcionando en el mismo circuito y, si es necesario, restablezca el interruptor.
http://www.bioniare.com/BIACLG201
http://www.bioniare.com/BIACLG201
to receive a FREE GIFT OR PROMO CODE*.
It’s our “thanks” to you for being a Bionaire brand customer.
para recibir un OBSEQUIO GRATIS O UN CÓDIGO DE
PROMOCIÓN*. Es nuestra manera de decirle “gracias” por
ser cliente de la marca Bionaire.
GO ONLINE NOW to
INGRESE AHORA MISMO al sitio
-You will also get access to special sale items
& promotions on a full assortment of Bionaire®
branded products.
*While supplies last; subject to availability.
*Hasta agotar el stock; sujeto a disponibilidad
HURRY & SIGN UP TODAY!
¡APRESÚRESE Y REGÍSTRESE HOY MISMO!
-También obtendrá acceso a promociones y artículos de venta especiales de una completa variedad de productos de la marca Bionaire®.
BCH9212-UM_12ESM1.indd 1 3/12/12 3:28 PM
Loading...
+ 1 hidden pages