Bertazzoni PROF366RTBXT, PROF365CTXV, PROF366QBXT, PROF305CTXV, PROF304QXE Design Guide

...
WALL OVENS SPECIALTY OVENS GAS RANGETOPS & COOKTOPS INDUCTION & ELECTRIC COOKTOPS
DESIGN GUIDE
1.2
BUILT-IN COOKING DESIGN GUIDE
Bertazzoni appliances are designed to work together and create harmony in the kitchen.
The products in our built-in cooking program can be combined with numerous installation options to create the ideal setup that suits the kitchen layout and cooking style of the homeowner. Versatility is key, with a choice of technologies and designs that work together seamlessly.
This guide contains up-to-date technical specifications and dimensions necessary to prepare the installation of Bertazzoni built-in cooking products in a kitchen.
All these details are also available online at bertazzoni.com.
INDEX
INTRODUCTION 3
WALL OVENS 4
30” Electric Convection Single Ovens 6
30” Electric Convection Double Ovens 11
24” Electric Convection Oven 15
SPECIALTY OVENS 19
30” Convection Speed Ovens 21
30” Convection Steam Ovens 26
30” Warming Drawer 31
30” Microwave Oven 34
24” Convection Speed Ovens 38
24” Microwave Drawer 43
INDUCTION & ELECTRIC COOKTOPS 72
36” Induction Cooktop 74
30” Induction Cooktop 77
30” Electric Ceramic Cooktop 80
24” Electric Ceramic Cooktop 83
MULTIPLE INSTALLATIONS 86
30” Oven - Wall Configurations 88
24” Oven - Wall Configurations 100
30” Oven and Cooktop - Undercounter Configurations 104
24” Oven and Cooktop - Undercounter Configurations 123
GAS RANGETOPS & COOKTOPS 46
48” Rangetops 48
36” Rangetops 51
36” Drop-in Cooktops 6 burners 54
36” Drop-in Cooktops 5 burners 57
30” Drop-in Cooktops 60
36” Gas Cooktop Front Control 63
30” Gas Cooktop Front Control 66
24” Gas Cooktop Front Control 69
3bertazzoni.com
WALL OVENS
Built-in ovens offer an excellent alternative – or even complementary choice – to freestanding range, offering simple elegance. For some, the ability to fit an oven easily into a compact space makes built-in ovens their first choice. For others it is the attraction of flexible design with the option to install the ovens on top of each other or side-by-side, at eye-level or undercounter. All Bertazzoni built-in ovens can be installed proud or perfectly flush to align with matching convection steam, speed and microwave ovens as well as warming drawers.
30” Electric Convection Single Ovens
30” Electric Convection Double Ovens
24” Electric Convection Single Ovens
4 bertazzoni.com
WALL OVENS
SIDE VIEW
FRONT VIEW TOP VIEW
30” Electric Convection Single Ovens
Dimensions
PROF30FSEXT PROF30FSEXV
MAST30FSEXT MAST30FSEXV
28" 712
CONDUIT CHANNEL
17 1/8"
436
1" 26
23 1/2"
596
1 7/8"
47
29 7/8"
758
28 5/8"
726
1/2"
13
3 3/8"
86
22 5/8"
575
28 1/8"
715
2" 52
CONDUIT CHANNEL
3 3/8"
86
21 5/8"
550
6 bertazzoni.com
CONVECTION OVENS
FRONT VIEW
30” Electric Convection Single Ovens
Installation requirements
INSTALLATION
The oven can be installed in a proud or flush application. Finish the edges of the opening because they may be visible when the door is open. The clearance between the oven and the kitchen units or other installed appliances must be enough to ensure sufficient cooling air ventilation.
For instructions and clearance of product combinations please see the Multiple Installation Sections (page 86).
CABINET REQUIREMENT
To prevent possible damage to cabinets and cabinet finishes, use only materials and finishes that will not discolor or delaminate and will withstand temperatures up to 195°F (90°C). Installation of the appliance must be performed in accordance with the provisions of applicable legislation. BE SURE that support for this appliance is perpendicular to the front facing of the wall or cabinet before you perform the installation. The cabinet base must be flat and capable of supporting the weight of the oven when in use.
ELECTRICAL REQUIREMENT
The installation must comply with all applicable electrical codes. A properly-grounded horizontally- mounted electrical receptacle should be installed. Place the electrical supply flush with the back wall and within the shaded area shown in the illustrations. Placement within the opening may require additional cabinet depth.
5"
127
E
4"
102
E
A separate circuit and a circuit breaker servicing only this appliance is reccomended
Minimum Suggested Load on Cabinet Base Board
For detailed installation specifications consult the installation manual.
275lb (125kg )
Electrical supply
120/240 V 120/208 V
60 Hz 60 Hz
5500 W 4400 W
Service 30 Amp dedicated circuit
Power Connection METAL CONDUIT – 59” cord
7bertazzoni.com
WALL OVENS
30” Electric Convection Single Ovens
Proud installation
TOP VIEW
4" x 4"
(102 x 102)
CUT OUT SLOT
FOR POWER CORD
a a
23"
584
DEPTH
SIDE VIEW
FRONT VIEW
28 3/8"
720
HEIGHT
28 1/2"
724
WIDTH
(a) Spacers - Included with appliance
8 bertazzoni.com
WALL OVENS
30” Electric Convection Single Ovens
Flush installation non vented
TOP VIEW
4" x 4"
(102 x 102)
CUT OUT SLOT
FOR POWER CORD
a a
23 5/8"
600
FLUSH INSET
DEPTH
1"
25
SIDE VIEW
FRONT VIEW
29 3/8"
746
FLUSH INSET
HEIGHT
28 3/8"
720
b
30 7/8"
784
FLUSH INSET
WIDTH
28 1/2"
724
7/8"
1 1/8"301 1/8"
30
1/8"
23
3
b
(a) Spacers - Included with appliance (b) Visible Area - Match finish to outside cabinet panels
9bertazzoni.com
WALL OVENS
30” Electric Convection Single Ovens
Flush installation vented
TOP VIEW
4" x 28 1/2" (102 x 724)
AIR INTAKE
a a
23 5/8"
600
FLUSH INSET
DEPTH
1"
25
SIDE VIEW
AIR INTAKE
FRONT VIEW
29 1/8"
741
FLUSH INSET
HEIGHT
AIR INTAKE
4" x 15"
(102 x 380)
28 3/8"
720
30 1/2"
774
FLUSH INSET
WIDTH
28 1/2"
724
3/4"
18
1" 25
b
1" 25
1/8"
3
b
AIR INTAKE
4" x 15"
(102 x 380)
(a) Spacers - Included with appliance (b) Visible Area - Match finish to outside cabinet panels
10 bertazzoni.com
WALL OVENS
SIDE VIEW
FRONT VIEW TOP VIEW
30” Electric Convection Double Ovens
Dimensions
PROF30FDEXT PROF30FDEXV
MAST30FDEXT MAST30FDEXV
1" 26
52 3/4"
1338
CONDUIT CHANNEL
53 1/4"
1352
3 3/8"
86
23"
585
28 1/8"
715
2 3/8"
CONDUIT CHANNEL
62
22" 560
17 1/8"
436
1 7/8"
47
23 1/2"
596
29 7/8"
758
1/2"
13
3 3/8"
86
11bertazzoni.com
WALL OVENS
FRONT VIEW
30” Electric Convection Double Ovens
Installation requirements
INSTALLATION
The oven can be installed in a proud or flush application. Finish the edges of the opening because they may be visible when the door is open. The clearance between the oven and the kitchen units or other installed appliances must be enough to ensure sufficient cooling air ventilation.
For instructions and clearance of product combinations please see the Multiple Installation Sections (page 86).
CABINET REQUIREMENT
To prevent possible damage to cabinets and cabinet finishes, use only materials and finishes that will not discolor or delaminate and will withstand temperatures up to 195°F (90°C). Installation of the appliance must be performed in accordance with the provisions of applicable legislation. BE SURE that support for this appliance is perpendicular to the front facing of the wall or cabinet before you perform the installation. The cabinet base must be flat and capable of supporting the weight of the oven when in use.
ELECTRICAL REQUIREMENT
The installation must comply with all applicable electrical codes. A properly-grounded horizontally- mounted electrical receptacle should be installed. Place the electrical supply flush with the back wall and within the shaded area shown in the illustrations. Placement within the opening may require additional cabinet depth.
5"
127
E
4"
102
Minimum Suggested Load on Cabinet Base Board
For detailed installation specifications consult the installation manual.
12 bertazzoni.com
485lb (220kg)
E
A separate circuit and a circuit breaker servicing only this appliance is reccomended
Electrical supply
120/240 V 120/208 V
60 Hz 60 Hz
11000 W
8800 W
Service 50 Amp dedicated circuit
Power Connection METAL CONDUIT – 59” cord
WALL OVENS
30” Electric Convection Double Ovens
Proud installation
TOP VIEW
4" x 4"
(102 x 102)
CUT OUT SLOT
FOR POWER CORD
a a
23 5/8"
600
DEPTH
SIDE VIEW
FRONT VIEW
53"
1346
HEIGHT
28 1/2"
724
WIDTH
(a) Spacers - Included with appliance
13bertazzoni.com
WALL OVENS
30” Electric Convection Double Ovens
Flush installation vented
TOP VIEW
4" x 28 1/2" (102 x 724)
AIR INTAKE
a
23 7/8"
606
FLUSH INSET
DEPTH
25
1"
a
SIDE VIEW
AIR INTAKE
FRONT VIEW
53 7/8"
1367
FLUSH INSET
HEIGHT
AIR INTAKE
4" x 15"
(102 x 380)
53"
1346
30 1/2"
774
FLUSH INSET
WIDTH
28 1/2"
724
b
3/4"
18
1" 25
b
1/8"
1" 25
AIR INTAKE
b
3
4" x 15"
(102 x 380)
(a) Spacers - Included with appliance (b) Visible Area - Match finish to outside cabinet panels
14 bertazzoni.com
WALL OVENS
SIDE VIEW
FRONT VIEW TOP VIEW
24” Electric Convection Single Ovens
Dimensions
PROF24FSEXV
22 7/8"
581
CONDUIT OUTPUT
3/4"
20
19 1/8"
485
1 3/8"
33
23 1/2"
598
23 3/8"
595
1/2"
13
2 3/8"
61
21 5/8"
550
21 7/8"
556
CONDUIT OUTPUT
15bertazzoni.com
WALL OVENS
FRONT VIEW
24” Electric Convection Single Ovens
Installation requirements
INSTALLATION
The oven can be installed in a proud or flush application. Finish the edges of the opening because they may be visible when the door is open. The clearance between the oven and the kitchen units or other installed appliances must be enough to ensure sufficient cooling air ventilation.
For instructions and clearance of product combinations please see the Multiple Installation Sections (page 86).
CABINET REQUIREMENT
To prevent possible damage to cabinets and cabinet finishes, use only materials and finishes that will not discolor or delaminate and will withstand temperatures up to 195°F (90°C). Installation of the appliance must be performed in accordance with the provisions of applicable legislation. BE SURE that support for this appliance is perpendicular to the front facing of the wall or cabinet before you perform the installation. The cabinet base must be flat and capable of supporting the weight of the oven when in use.
ELECTRICAL REQUIREMENT
The installation must comply with all applicable electrical codes. A properly-grounded horizontally- mounted electrical receptacle should be installed. Place the electrical supply flush with the back wall and within the shaded area shown in the illustrations. Placement within the opening may require additional cabinet depth.
5"
127
E
4"
102
E
A separate circuit and a circuit breaker servicing only this appliance is reccomended
Minimum Suggested Load on Cabinet Base Board
For detailed installation specifications consult the installation manual.
16 bertazzoni.com
155lb (70kg)
Electrical supply
120/240 V 120/208 V
60 Hz 60 Hz
2800 W 2100 W
Service 16 Amp dedicated circuit
Power Connection METAL CONDUIT – 59” cord
WALL OVENS
24” Electric Convection Single Ovens
Proud installation
TOP VIEW
4" x 4"
(102 x 102)
CUT OUT SLOT
FOR POWER CORD
a
23"
585
DEPTH
a
SIDE VIEW
FRONT VIEW
23"
585
22"
560
(a) Spacers - Included with appliance
17bertazzoni.com
WALL OVENS
24” Electric Convection Single Ovens
Flush installation non vented
TOP VIEW
4" x 4"
(102 x 102)
CUT OUT SLOT
FOR POWER CORD
a
23 3/4"
603
FLUSH INSET
DEPTH
3/4"
a
20
SIDE VIEW
FRONT VIEW
24 1/8"
614
FLUSH INSET
HEIGHT
FLUSH INSET
WIDTH
23"
585
1" 26
b b
3/8"
24"
611
22"
560
9
3/4"
20
1" 26
(a) Spacers - Included with appliance (b) Visible Area - Match finish to outside cabinet panels
18 bertazzoni.com
SPECIALTY OVENS
Bertazzoni has perfected cooking appliances for over 100 years. As a result, we understand that today’s home chefs want a variety of technologies at their disposal. That means lifestyle-driven speed cooking without sacrificing flavor, texture or aroma. Or cooking with steam to retain the food’s natural nutrients, vitamins and minerals. Bertazzoni built-in specialty ovens include convection, steam, speed and powerful microwave technology, along with a practical warming drawer. Engineered to integrate perfectly into the vertical and horizontal lines of your kitchen cabinets, they can be installed stacked or side by side to create perfect symmetry.
30” Convection Speed Ovens
30” Convection Steam Ovens
30” Microwave Oven
24” Convection
Speed Oven
30” Warming Drawers
24” Microwave Drawer
19bertazzoni.com
20 bertazzoni.com
SPECIALTY OVENS
SIDE VIEW
FRONT VIEW TOP VIEW
30” Convection Speed Ovens
Dimensions
PROF30SOEX MAST30SOEX
17 1/2"
446
CONDUIT OUTPUT
1"
26
14 1/8"
359
2 3/8"
61
29 7/8"
758
18 3/4"
475
1/16"
2
20 3/8"
517
3 3/8"
86
21 1/4"
541
CONDUIT OUTPUT
21 3/8"
543
21bertazzoni.com
SPECIALTY OVENS
FRONT VIEW
30” Convection Speed Ovens
Installation requirements
INSTALLATION
The oven can be installed in a proud or flush application. Finish the edges of the opening because they may be visible when the door is open. The clearance between the oven and the kitchen units or other installed appliances must be enough to ensure sufficient cooling air ventilation.
For instructions and clearance of product combinations please see the Multiple Installation Sections (page 86).
CABINET REQUIREMENT
To prevent possible damage to cabinets and cabinet finishes, use only materials and finishes that will not discolor or delaminate and will withstand temperatures up to 195°F (90°C). Installation of the appliance must be performed in accordance with the provisions of applicable legislation. BE SURE that support for this appliance is perpendicular to the front facing of the wall or cabinet before you perform the installation. The cabinet base must be flat and capable of supporting the weight of the oven when in use.
ELECTRICAL REQUIREMENT
The installation must comply with all applicable electrical codes. A properly-grounded horizontally- mounted electrical receptacle should be installed. Place the electrical supply flush with the back wall and within the shaded area shown in the illustrations. Placement within the opening may require additional cabinet depth.
5"
127
E
4"
102
E
A separate circuit and a circuit breaker servicing only this appliance is reccomended
Minimum Suggested Load on Cabinet Base Board
For detailed installation specifications consult the installation manual.
22 bertazzoni.com
110lb (50kg) Electrical supply 120/240 V 60 Hz 3850 W
Service 16 Amp dedicated circuit
Power Connection METAL CONDUIT – 59” cord
SPECIALTY OVENS
30” Convection Speed Ovens
Proud installation
TOP VIEW
4" x 28 1/2"
(102 x 724)
AIR INTAKE
a
23"
585
FLUSH INSET
DEPTH
4 1/4"
107
a
SIDE VIEW
AIR INTAKE
FRONT VIEW
18 1/4"
464
AIR INTAKE
4" x 15"
(102 x 380)
28 1/2"
724
AIR INTAKE
4" x 15"
(102 x 380)
(a) Spacers - Included with appliance
23bertazzoni.com
SPECIALTY OVENS
30” Convection Speed Ovens
Flush installation
TOP VIEW
4" x 28 1/2"
(102 x 724)
AIR INTAKE
a
23 3/4"
603
FLUSH INSET
DEPTH
a
SIDE VIEW
AIR INTAKE
FRONT VIEW
19 1/8"
485
FLUSH INSET
HEIGHT
AIR INTAKE
4" x 15"
(102 x 380)
18 1/4"
464
4 1/4"
107
30 1/2"
774
FLUSH INSET
WIDTH
28 1/2"
724
1" 25
b
1"
25
1/8"
3
1" 25
3/4"
18
b
AIR INTAKE
4" x 15"
(102 x 380)
(a) Spacers - Included with appliance (b) Visible Area - Match finish to outside cabinet panels
24 bertazzoni.com
SPECIALTY OVENS
30” Convection Speed Ovens
Undercounter installation
SIDE VIEW
2 1/2"
62
TOP VIEW
4" x 28 1/2" (102 x 724) AIR INTAKE
FRONT VIEW
23 3/4"
603
FLUSH INSET
DEPTH
a
30 1/2"
774
FLUSH INSET
WIDTH
4 1/4"
107
a
1" 25
FLUSH INSET
AIR INTAKE
36" 914
(a) Spacers - Included with appliance (b) Visible Area - Match finish to outside cabinet panels
19 1/8"
485
HEIGHT
AIR INTAKE
(102 x 380)
4" x 15"
18 1/4"
464
3/4"
28 1/2"
724
1/8"
3
18
1"
25
bb
AIR INTAKE
4" x 15"
(102 x 380)
1" 25
25bertazzoni.com
SPECIALTY OVENS
SIDE VIEW
FRONT VIEW TOP VIEW
30” Convection Steam Ovens
Dimensions
PROF30CSEX MAST30CSEX
17 1/2"
446
CONDUIT OUTPUT
1"
26
14 1/8"
359
2 3/8"
61
29 7/8"
758
18 3/4"
475
1/16"
2
20 3/8"
517
3 3/8"
86
21 1/4"
541
CONDUIT OUTPUT
21 3/8"
543
26 bertazzoni.com
SPECIALTY OVENS
FRONT VIEW
30” Convection Steam Ovens
Installation requirements
INSTALLATION
The oven can be installed in a proud or flush application. Finish the edges of the opening because they may be visible when the door is open. The clearance between the oven and the kitchen units or other installed appliances must be enough to ensure sufficient cooling air ventilation.
For instructions and clearance of product combinations please see the Multiple Installation Sections (page 86).
CABINET REQUIREMENT
To prevent possible damage to cabinets and cabinet finishes, use only materials and finishes that will not discolor or delaminate and will withstand temperatures up to 195°F (90°C). Installation of the appliance must be performed in accordance with the provisions of applicable legislation. BE SURE that support for this appliance is perpendicular to the front facing of the wall or cabinet before you perform the installation. The cabinet base must be flat and capable of supporting the weight of the oven when in use.
ELECTRICAL REQUIREMENT
The installation must comply with all applicable electrical codes. A properly-grounded horizontally- mounted electrical receptacle should be installed. Place the electrical supply flush with the back wall and within the shaded area shown in the illustrations. Placement within the opening may require additional cabinet depth.
5"
127
E
4"
102
E
A separate circuit and a circuit breaker servicing only this appliance is reccomended
Minimum Suggested Load on Cabinet Base Board
For detailed installation specifications consult the installation manual.
110lb (50kg) Electrical supply 120/240 V 60 Hz 3200 W
Service 16 Amp dedicated circuit
Power Connection METAL CONDUIT – 59” cord
27bertazzoni.com
SPECIALTY OVENS
30” Convection Steam Ovens
Proud installation
TOP VIEW
4" x 28 1/2"
(102 x 724)
AIR INTAKE
a
23" 585
FLUSH INSET
DEPTH
4 1/4"
107
a
SIDE VIEW
AIR INTAKE
FRONT VIEW
18 1/4"
464
AIR INTAKE
4" x 15"
(102 x 380)
28 1/2"
724
AIR INTAKE
4" x 15"
(102 x 380)
(a) Spacers - Included with appliance
28 bertazzoni.com
SPECIALTY OVENS
30” Convection Steam Ovens
Flush installation
TOP VIEW
4" x 28 1/2"
(102 x 724)
AIR INTAKE
a
23 3/4"
603
FLUSH INSET
DEPTH
a
SIDE VIEW
AIR INTAKE
FRONT VIEW
19 1/8"
485
FLUSH INSET
HEIGHT
AIR INTAKE
4" x 15"
(102 x 380)
18 1/4"
464
4 1/4"
107
30 1/2"
774
FLUSH INSET
WIDTH
28 1/2"
724
1" 25
b
1"
25
1/8"
3
1" 25
3/4"
18
b
AIR INTAKE
4" x 15"
(102 x 380)
(a) Spacers - Included with appliance (b) Visible Area - Match finish to outside cabinet panels
29bertazzoni.com
SPECIALTY OVENS
30” Convection Steam Ovens
Undercounter installation
SIDE VIEW
2 1/2"
62
TOP VIEW
4" x 28 1/2" (102 x 724) AIR INTAKE
FRONT VIEW
23 3/4"
603
FLUSH INSET
DEPTH
a
30 1/2"
774
FLUSH INSET
WIDTH
4 1/4"
107
a
1" 25
AIR INTAKE
30 bertazzoni.com
36"
914
19 1/8"
485
FLUSH INSET
HEIGHT
AIR INTAKE
4" x 15"
(102 x 380)
18 1/4"
464
3/4"
28 1/2"
724
1/8"
3
18
1"
25
bb
AIR INTAKE
4" x 15"
(102 x 380)
1" 25
Loading...
+ 120 hidden pages