BELDEN 49760A Technical Data

49760A Molded Cable Assemblies - D-Subminiature Assembly

3

For more information please

call

1-800-Belden1

See Put-ups and Colors

Description:

50-position shielded D-Sub, for high-density applications where assembly is exposed to high noise environment, polyethylene insulation, foil
plus braid shield, PVC jacket.

PHYSICAL CHARACTERISTICS:
CONDUCTOR:

Number of Conductors 50
Total Number of Conductors 50
Number of Pins 50
AWG 26
Stranding 7x34
Conductor Diameter .019 in.
Conductor Material TC - Tinned Copper

INSULATION:

Insulation Material PE - Polyethylene
Nom. Insulation Wall Thickness 0.01 in.

OUTER SHIELD:

Outer Shield Trade Name Duofoil®
Outer Shield Type Tape/Braid
Outer Shield Material :

Layer Number Trade Name Type Material % Coverage (%)

1 Duofoil® Tape Aluminum Foil-Polyester

Tape-Aluminum Foil

2 Braid TC - Tinned Copper 90

Outer Shield %Coverage 100 %

OUTER SHIELD DRAIN WIRE :

Outer Shield Drain Wire AWG 22
Outer Shield Drain Wire Stranding 7x30
Outer Shield Drain Wire Conductor Material TC - Tinned Copper

OUTER JACKET:

Outer Jacket Material PVC - Polyvinyl Chloride
Outer Jacket Nominal Wall Thickness 0.049 in.

100

Page 1 of

49760A Molded Cable Assemblies - D-Subminiature Assembly

3

OVERALL NOMINAL DIAMETER:

Overall Nominal Diameter .535 in.

ASSEMBLY DIMENSIONAL CHARACTERISTICS:

Assembly Dimensional Length 5 ft.

CONNECTOR CHARACTERISTICS:

FIRST END :

Connector Characteristics - First End Connector Type D-Sub
Connector Characteristics - First End # of Connector

Contacts/positions
Connector Characteristics - First End Connector

Gender
Connector Characteristics - First End Connector

Shielding Type
Connector Characteristics - First End Overmold Type 50 Position D-Sub
Connector Characteristics - First End Overmold

Compound Material
Connector Characteristics - First End Overmold Color Chrome
Connector Characteristics - First End Retention

Hardware

50

Male

Metal Backshells

PVC

Thumbscrew

SECOND END :

Connector Characteristics - Second End Connector
Type

Connector Characteristics - Second End # of
Connector Contacts/positions

Connector Characteristics - Second End Connector
Gender

Connector Characteristics - Second End Connector
Shielding Type

Connector Characteristics - Second End Overmold
Type

Connector Characteristics - Second End Overmold
Compound Material

Connector Characteristics - Second End Overmold
Color

Connector Characteristics - Second End Retention
Hardware

Wiring

MECHANICAL CHARACTERISTICS:

UL Temperature Rating 80°C (UL AWM Style 2919)

APPLICABLE SPECIFICATIONS AND AGENCY COMPLIANCE:

D-Sub

50

Male

Metal Backshells

50 Position D-Sub

PVC

Chrome

Thumbscrew

Wiring: Point to Point. Pin #1 on end 1 to pin #1 on end 2. Pin #2 to pin #2, etc.
Cable shield connected to connector shell.

NEC/(UL) Specification CM (cable only)
AWM Specification UL Style 2919 (30 V 80°C) (cable only)

Page 2 of