BELDEN 49736 Technical Data
49736 Molded Cable Assemblies - GPIB (General Purpose Interface Bus) Assembly
4
For more information please
call
1-800-Belden1
See Put-ups and Colors
Description:
GPIB shielded, for use with electronic equipment that is IEEE-488 compatible, molded PVC connector, S-R PVC insulation, PVC jacket.
PHYSICAL CHARACTERISTICS:
CONDUCTOR:
Number of Pairs 6
Number of Conductors 11
Total Number of Conductors 23
Number of Pins 24
AWG :
Number of
Conductors
10 26 7x34 TC - Tinned
1 24 7x32 TC - Tinned
Number of
Pairs
6 26 7x34 TC - Tinned
Number of
Coax
Number of
Triads
AWG Stranding Conductor
Material
Copper
Copper
Copper
Conductor
Diameter (in.)
INSULATION:
Insulation Material S-R PVC - Semi-Rigid Polyvinyl Chloride
Nom. Insulation Wall Thickness 0.01 in.
OUTER SHIELD:
Outer Shield Trade Name Beldfoil®
Outer Shield Type Tape/Braid
Outer Shield Material :
Layer Number Trade Name Type Material % Coverage (%)
1 Beldfoil® Tape Aluminum Foil-Polyester
Tape
2 Braid TC - Tinned Copper 90
Outer Shield %Coverage 100 %
OUTER SHIELD DRAIN WIRE :
Outer Shield Drain Wire AWG 26
Outer Shield Drain Wire Stranding 7x34
Outer Shield Drain Wire Conductor Material TC - Tinned Copper
Page 1 of
100
49736 Molded Cable Assemblies - GPIB (General Purpose Interface Bus) Assembly
4
OUTER JACKET:
Outer Jacket Material PVC - Polyvinyl Chloride
Outer Jacket Nominal Wall Thickness 0.035 in.
OVERALL NOMINAL DIAMETER:
Overall Nominal Diameter .350 in.
ASSEMBLY DIMENSIONAL CHARACTERISTICS:
Assembly Dimensional Length 9.8 ft.
CONNECTOR CHARACTERISTICS:
FIRST END :
Connector Characteristics - First End Connector Type Stackable Ribbon
Connector Characteristics - First End # of Connector
Contacts/positions
Connector Characteristics - First End Connector
Gender
Connector Characteristics - First End Connector
Shielding Type
Connector Characteristics - First End Overmold Type GPIB
Connector Characteristics - First End Overmold
Compound Material
Connector Characteristics - First End Overmold Color Gull Gray
Connector Characteristics - First End Retention
Hardware
24
Male/Female
Metal Backshells
PVC
Thumbscrews
SECOND END :
Connector Characteristics - Second End Connector
Type
Connector Characteristics - Second End # of
Connector Contacts/positions
Connector Characteristics - Second End Connector
Gender
Connector Characteristics - Second End Connector
Shielding Type
Connector Characteristics - Second End Overmold
Type
Connector Characteristics - Second End Overmold
Compound Material
Connector Characteristics - Second End Overmold
Color
Connector Characteristics - Second End Retention
Hardware
Wiring Straight wired
WIRING DIAGRAM:
Wiring Diagram Color Code Chart :
Stackable Ribbon
24
Male/Female
Metal Backshells
GPIB
PVC
Gull Gray
Thumbscrews
Page 2 of
Loading...