Belden 1303E Specifications

Page 1
For more Information
please call
1-800-Belden1
General Description:
Catsnake® Category 6A Patch S/FTP, 4-Unbonded Pairs, 24AWG Stranded Bare Copper Conductors, Foamed PE Insulation, Individually Shielded Pairs, Overall Tinned Copper Braid, PVC Inner and Outer Jackets
Suitable Applications: CAT 6a patch horizontal and building backbone, CobraNet, eSnake, Ethersound, Digital audio over
Ethernet, 10GBase-T (10 Gigabit Ehternet), 1000Base-T (Gigabit Ethernet), 100 Base-T, 10 Base-T, FDDI, ATM, HDBaseT
Physical Characteristics (Overall)
Conductor
AWG:
# Pairs AWG Stranding Conductor Material
4 24 7x BC - Bare Copper
Total Number of Conductors: 8
Insulation
Insulation Material:
Insulation Material Dia. (in.)
FPE - Foamed Polyethylene 0.055
Inner Shield
Inner Shield Material:
Type Inner Shield Material Coverage (%) Description
Tape Aluminum/Polyester (Al out) 100.000 Each Pair Individually Shielded
Inner Shield Drain Wire AWG:
AWG Stranding Conductor Material
26 7x Tinned Cu (one drain wire for 4 pairs)
Inner Jacket
Inner Jacket Material:
Inner Jacket Material Nom. Dia. (in.)
PVC 0.284
Outer Shield
Outer Shield Material:
Type Outer Shield Material Coverage (%)
Braid Tinned Copoper 80.000
Outer Jacket
Outer Jacket Material:
Outer Jacket Material
Matte PVC
Outer Jacket Diameter:
Nom. Dia. (in.)
0.343
Outer Jacket Ripcord: No
Pair
Pair Color Code Chart:
Number Color
1 White & Blue
2 White & Orange
3 White & Green
4 White & Brown
Mechanical Characteristics (Overall)
Installation Temperature Range: +5°C To +50°C
Page 1 of 4 08-26-2016
Detailed Specifications & Technical Data
ENGLISH MEASUREMENT VERSION
1303E Multi-Conductor - Category 6A Tactical Cable Upjacketed
Page 2
Operating Temperature Range: -30°C To +60°C
Bulk Cable Weight: 55.780 lbs/1000 ft.
Max. Recommended Pulling Tension: 16.900 lbs.
Min. Bend Radius/Minor Axis: 3.430 in.
Min. Bend/Installation: 3.430 in.
Flex Cycle Rating: 2,000,000 cycles (see Notes below)
Applicable Specifications and Agency Compliance (Overall)
Applicable Standards & Environmental Programs
EU Directive 2011/65/EU (ROHS II): Yes
EU CE Mark: Yes
EU Directive 2000/53/EC (ELV): Yes
EU Directive 2002/95/EC (RoHS): Yes
EU RoHS Compliance Date (mm/dd/yyyy): 05/17/2016
EU Directive 2002/96/EC (WEEE): Yes
EU Directive 2003/11/EC (BFR): Yes
CA Prop 65 (CJ for Wire & Cable): Yes
MII Order #39 (China RoHS): Yes
ANSI Specification: ANSI/TIA/EIA 568-B.2-10 (2008)
Other Specification: ISO/IEC 11801 2nd Edition (2002), ISO/IEC 11801 Amendment 2 (2010), EN 50173-1 (2002), EN
50173-1 Amendment 1 (2009), ANSI/TIA/EIA 568-B.2-10 (2008), IEC 60332-1
Applicable Patents:
Country
www.belden.com/p
Flame Test
IEC Flame Test: 60332-1
Suitability
Suitability - Indoor: Yes
Suitability - Outdoor: Yes
Suitability - Burial: No
Sunlight Resistance: Yes - Black only.
Oil Resistance: No
Non-halogenated: No
Plenum/Non-Plenum
Plenum (Y/N): No
Electrical Characteristics (Overall)
Nom. Characteristic Impedance:
Impedance (Ohm)
100.000
Max. Mutual Capacitance:
Capacitance (pF/ft)
17.100
Maximum Capacitance Unbalance (pF/100 m): 160
Nominal Velocity of Propagation:
VP (%)
77.000
Nominal Delay:
Freq. (MHz) Delay (ns/ft)
1.000 1.737
4.000 1.682
10.000 1.661
16.000 1.655
31.200 1.646
62.500 1.643
100.000 1.640
Page 2 of 4 08-26-2016
Detailed Specifications & Technical Data
ENGLISH MEASUREMENT VERSION
1303E Multi-Conductor - Category 6A Tactical Cable Upjacketed
Page 3
125.000 1.637
200.000 1.634
250.000 1.634
300.000 1.634
500.000 1.634
Max. Delay Skew:
Delay Skew (ns/100 m)
25.000
Maximum Conductor DC Resistance:
DCR @ 20°C (Ohm/100 m)
9.500
Max. Operating Voltage - Other:
Voltage Description
72 VDC
Max. Recommended Current:
Description Current
Each Conductor 1.5A
Maximum DCR Unbalanced:
Description DCR Unbalance @ 20°C (%)
Conductor-to-Conductor 2.000
Pair-to-Pair 4.000
Electrical Characteristics-Premise (Overall)
Premise Cable Electrical Table 1:
Freq. (MHz) Max. Attenuation (dB/100 m) Min. NEXT (dB) Min. PSNEXT (dB) Min. ACR (dB) Min. PSACR (dB) Min RL (dB)
1 2.500 75.3 72.3 72.8 69.8 20.000
4 4.600 66.3 63.3 61.7 58.7 23.000
10 7.100 60.3 57.3 53.2 50.2 25.000
16 9.000 57.2 54.2 48.3 45.3 25.000
31.2 12.600 52.9 49.9 50.4 47.3 23.600
62.5 18.000 48.4 45.4 30.4 27.4 21.500
100 23.000 45.3 42.3 22.3 19.3 20.100
125 25.800 43.8 40.8 18 15 19.400
200 33.100 40.8 37.8 7.7 4.7 18.000
250 37.300 39.3 36.3 2 -1 17.300
300 41.100 38.1 35.1 -3 -6 17.300
500 54.300 34.8 31.8 -19.5 -22.5 17.300
Premise Cable Electrical Table 2:
Freq. (MHz) Input (Unfitted) Imp. (Ohms) Fitted Impedance Min. ACRF (dB) Min. PSACRF (dB)
1 100 ± 15 105 ± 10 68 65
4 100 ± 15 100 ± 15 56 53
10 100 ± 15 100 ± 15 48 45
16 100 ± 15 100 ± 15 43.9 40.9
31.2 100 ± 15 100 ± 10 38.1 35.1
62.5 100 ± 15 100 ± 10 32.1 9.1
100 100 ± 15 100 ± 10 28 25
125 100 ± 32 100 ± 10 26.1 23.1
200 100 ± 22 100 ± 10 22 19
250 100 ± 32 100 ± 10 20 17
300 100 ± 32 100 ± 10 18.5 15.5
500 100 ± 32 100 ± 10 14 11
Premise Cable Electrical Table 4:
Frequency (MHz) Min. PSANEXT (dB) Min. PSAACRF (dB) Min. TCL (dB) Min. ELTCTL (dB)
1.000 67.000 67.000 40.000 35.000
4.000 67.000 66.200 34.000 23.000
10.000 67.000 58.200 30.000 15.000
16.000 67.000 54.100 28.000 10.900
31.200 67.000 48.300 25.100 5.100
62.500 65.600 42.300 22.000
100.000 62.500 38.200 20.000
125.000 61.000 36.300 19.000
200.000 58.000 32.200 17.000
250.000 56.500 30.200 16.000
300.000 55.300 28.700
500.000 52.000 24.200
Page 3 of 4 08-26-2016
Detailed Specifications & Technical Data
ENGLISH MEASUREMENT VERSION
1303E Multi-Conductor - Category 6A Tactical Cable Upjacketed
Page 4
Notes (Overall)
Notes: Outer shield (braid) is under inner jacket. Flex test: C-track, 100mm radius, 5 meter length, 3.5 meters/second
Put Ups and Colors:
Item # Putup Ship Weight Color Notes Item Desc
1303E 0101000 1,000 FT 63.000 FT BLACK CATSNAKE CAT 6A S/FTP PVC
1303E 0101640 1,640 FT 0.000 BLACK CATSNAKE CAT 6A S/FTP PVC
1303E 010500 500 FT 31.500 FT BLACK CATSNAKE CAT 6A S/FTP PVC
Revision Number: 0 Revision Date: 08-18-2016
© 2016 Belden, Inc All Rights Reserved.
Although Belden makes every reasonable effort to ensure their accuracy at the time of this publication, information and specifications described herein are subject to error or omission and to change without notice, and the listing of such information and specifications does not ensure product availability. Belden provides the information and specifications herein on an "AS IS" basis, with no representations or warranties, whether express, statutory or implied. In no event will Belden be liable for any damages (including consequential, indirect, incidental, special, punitive, or exemplary damages) whatsoever, even if Belden has been advised of the possibility of such damages, whether in an action under contract, negligence or any other theory, arising out of or in connection with the use, or inability to use, the information or specifications described herein. All sales of Belden products are subject to Belden's standard terms and conditions of sale. Belden believes this product to be in compliance with EU RoHS (Directive 2002/95/EC, 27-Jan-2003). Material manufactured prior to the compliance date may be in stock at Belden facilities and in our Distributor’s inventory. The information provided in this Product Disclosure, and the identification of materials listed as reportable or restricted within the Product Disclosure, is correct to the best of Belden’s knowledge, information, and belief at the date of its publication. The information provided in this Product Disclosure is designed only as a general guide for the safe handling, storage, and any other operation of the product itself or the one that it becomes a part of. This Product Disclosure is not to be considered a warranty or quality specification. Regulatory information is for guidance purposes only. Product users are responsible for determining the applicability of legislation and regulations based on their individual usage of the product. Belden declares this product to be in compliance with EU LVD (Low Voltage Directive 2014/35/EU).
Page 4 of 4 08-26-2016
Detailed Specifications & Technical Data
ENGLISH MEASUREMENT VERSION
1303E Multi-Conductor - Category 6A Tactical Cable Upjacketed
Loading...