Beko RDP 6600, RDP 6601 User manual [EN,FR]

0 (0)

RDP 6600

RDP 6601

Refrigerator

Réfrigérateur

Please read this manual first!

Dear Customer,

We hope that your product, which has been produced in modern plants and checked under the most meticulous quality control procedures, will provide you an effective service.

For this, we recommend you to carefully read the entire manual of your product before using it and keep it at hand for future references.

This manual

Will help you use your appliance in a fast and safe way.

Read the manual before installing and operating your product.

Follow the instructions, especially those for safety.

Keep the manual in an easily accessible place as you may need it later.

Besides, read also the other documents provided with your product.

Please note that this manual may be valid for other models as well.

Symbols and their descriptions

This instruction manual contains the following symbols:

C Important information or useful usage tips.

AWarning against dangerous conditions for life and property.

BWarning against electric voltage.

This product is supplied with the selective sorting symbol for waste electrical Recycling and electronic equipment (WEEE).

This means that this product must be handled pursuant to European Directive 2002/96/EC in order to be recycled or dismantled to minimise its impact on the environment. For further information, please contact your local or regional authorities.

Electronic products not included in the selective sorting process are potentially dangerous for the environment and human health due to the presence of hazardous substances.

CONTENTS

1 Your refrigerator

3

2 Important Safety Warnings4

Intended use......................................

4

For products with a water dispenser;. 6

Child safety........................................

6

HCA Warning.....................................

6

Things to be done for energy saving...

7

3 Installation

8

Points to be considered when re-

 

transporting your refrigerator..............

8

Before operating your refrigerator.......

8

Electric connection.............................

8

Disposing of the packaging................

9

Disposing of your old refrigerator........

9

Placing and Installation.......................

9

Adjusting the legs...............................

9

Replacing the interior light bulb .......

10

4

Preparation

11

Reversing the doors.........................

12

5

Using your refrigerator 13

Thermostat setting button................

13

Defrost.............................................

13

Crisper humidity control sliders.........

14

6

Maintenance and

 

cleaning

15

Protection of plastic surfaces ..........

15

7

Recommended solutions

for the problems

16

2 EN

Beko RDP 6600, RDP 6601 User manual

1 Your refrigerator

A

1

2

3

4

5

5

B

5

6

7

8

9

10

A- Freezer compartment

B- Fridge compartment

1.Ice cube tray

2.Freezer shelf

3.Interior light

4.Thermostat knob

5.Fridge compartment shelves

11

12

12

12

7.Crisper humidity controls

8.Crisper cover

9.Salad crisper

10.Adjustable front feet

11.Door shelf

12.Egg tray

13.Bottle shelf

6.Defrost water collection channel - Drain tube

CFigures that take place in this instruction manual are schematic and may not correspond exactly with your product. If the subject parts are not included in the product you have purchased, then it is valid for other models.

3 EN

2

Important Safety Warnings

Please review the following information.

• For products with a freezer

Failure to observe this information may

compartment; Do not put bottled and

canned liquid beverages in the freezer

cause injuries or material damage.

compartment. Otherwise, these may

Otherwise, all warranty and reliability

burst.

commitments will become invalid.

• Do not touch frozen food by hand;

The usage life of the unit you

they may stick to your hand.

purchased is 10 years. This is the

• Unplug your refrigerator before

period for keeping the spare parts

cleaning or defrosting.

required for the unit to operate as

• Vapor and vaporized cleaning

described.

materials should never be used in

 

 

Intended use

cleaning and defrosting processes of

your refrigerator. In such cases, the

This product is intended to be used

vapor may get in contact with the

– indoors and in closed areas such as

electrical parts and cause short circuit

homes;

or electric shock.

– in closed working environments such

• Never use the parts on your

as stores and offices;

refrigerator such as the door as a

– in closed accommodation areas such

means of support or step.

as farm houses, hotels, pensions.

• Do not use electrical devices inside

• This product should not be used

the refrigerator.

outdoors.

• Do not damage the parts, where

 

 

General safety

the refrigerant is circulating, with

drilling or cutting tools. The refrigerant

• When you want to dispose/scrap

that might blow out when the gas

the product, we recommend you to

channels of the evaporator, pipe

consult the authorized service in order

extensions or surface coatings are

to learn the required information and

punctured causes skin irritations and

authorized bodies.

eye injuries.

• Consult your authorized service for

• Do not cover or block the ventilation

all your questions and problems

holes on your refrigerator with any

related to the refrigerator. Do not

material.

intervene or let someone intervene to

• Electrical devices must be repaired

the refrigerator without notifying the

by only authorised persons. Repairs

authorised services.

performed by incompetent persons

• For products with a freezer

create a risk for the user.

compartment; Do not eat cone ice

• In case of any failure or during

cream and ice cubes immediately

a maintenance or repair work,

after you take them out of the freezer

disconnect your refrigerator’s mains

compartment! (This may cause

supply by either turning off the

frostbite in your mouth.)

relevant fuse or unplugging your

appliance.

4 EN

Do not pull by the cable when pulling off the plug.

Place the beverage with higher proofs tightly closed and vertically.

Never store spray cans containing flammable and explosive substances in the refrigerator.

Do not use mechanical devices or other means to accelerate the

defrosting process, other than those recommended by the manufacturer.

This product is not intended to be used by persons with physical, sensory or mental disorders or unlearned or inexperienced people (including children) unless they are attended by a person who will be responsible for their safety or who will instruct them accordingly for use of the product

Do not operate a damaged refrigerator. Consult with the service agent if you have any concerns.

Electrical safety of your refrigerator shall be guaranteed only if the earth system in your house complies with standards.

Exposing the product to rain, snow, sun and wind is dangerous with respect to electrical safety.

Contact authorized service when there is a power cable damage to avoid danger.

Never plug the refrigerator into the wall outlet during installation. Otherwise, risk of death or serious injury may arise.

This refrigerator is intended for only storing food items. It must not be used for any other purpose.

Label of technical specifications is located on the left wall inside the refrigerator.

Never connect your refrigerator to electricity-saving systems; they may damage the refrigerator.

If there is a blue light on the refrigerator, do not look at the blue light with optical tools.

For manually controlled refrigerators, wait for at least 5 minutes to start the refrigerator after power failure.

This operation manual should be handed in to the new owner of the product when it is given to others.

Avoid causing damage on power cable when transporting the refrigerator. Bending cable may cause fire. Never place heavy objects on power cable. Do not touch the plug with wet hands when plugging the product.

Do not plug the refrigerator if the wall outlet is loose.

Water should not be sprayed directly on inner or outer parts of the product for safety purposes.

Do not spray substances containing inflammable gases such as propane gas near the refrigerator to avoid fire and explosion risk.

Never place containers filled with water on top of the refrigerator, otherwise this may cause electric shock or fire.

Do not overload your refrigerator with excessive amounts of food. If

5 EN

overloaded, the food items may fall down and hurt you and damage refrigerator when you open the door.

Never place objects on top of the refrigerator; otherwise, these objects may fall down when you open or close the refrigerator's door.

As they require a precise temperature, vaccines, heat-sensitive medicine and scientific materials and etc. should not be kept in the refrigerator.

If not to be used for a long time, refrigerator should be unplugged.

A possible problem in power cable may cause fire.

The plug's tip should be regularly cleaned; otherwise, it may cause fire.

The plug’s tip should be cleaned regularly with a dry cloth; otherwise, it may cause fire.

Refrigerator may move if adjustable legs are not properly secured on the floor. Properly securing adjustable legs on the floor can prevent the refrigerator to move.

When carrying the refrigerator, do not hold it from door handle. Otherwise, it may be snapped.

When you have to place your product next to another refrigerator or freezer, the distance between devices should be at least 8cm. Otherwise, adjacent side walls may be humidified.

For products with a water dispenser;

Pressure of water mains should be minimum 1 bar. Pressure of water mains should be maximum 8 bars.

• Use only potable water.

Child safety

If the door has a lock, the key should be kept away from reach of children.

Children must be supervised to prevent them from tampering with the product.

HCA Warning

If your product's cooling system contains R600a:

This gas is flammable. Therefore, pay attention to not damaging the cooling system and piping during usage and transportation. In the event of damage, keep your product away from potential fire sources that can cause the product catch a fire and ventilate the room in which the unit is placed.

Ignore this warning if your product's cooling system contains R134a.

Type of gas used in the product is stated in the type plate which is on the left wall inside the refrigerator.

Never throw the product in fire for disposal.

6 EN

Things to be done for energy saving

Do not leave the doors of your refrigerator open for a long time.

Do not put hot food or drinks in your refrigerator.

Do not overload your refrigerator so that the air circulation inside of it is not prevented.

Do not install your refrigerator under direct sunlight or near heat emitting appliances such as ovens, dishwashers or radiators.

Pay attention to keep your food in closed containers.

For products with a freezer compartment; You can store maximum amount of food items in the freezer when you remove the shelf or drawer of the freezer. Energy consumption value stated for your refrigerator has been determined

by removing freezer shelf or drawer and under maximum load. There is no harm to use a shelf or drawer

according to the shapes and size of food to be frozen.

Thawing frozen food in fridge compartment will both provide energy saving and preserve the food quality.

7 EN

3 Installation

BPlease remember that the manufacturer shall not be held liable if the information given in the instruction

manual is not observed.

Points to be considered when re-transporting your refrigerator

1.Your refrigerator must be emptied and cleaned prior to any transportation.

2.Shelves, accessories, crisper and etc. in your refrigerator must be fastened securely by adhesive tape against any jolt before repackaging.

3.Packaging must be tied with thick tapes and strong ropes and the rules of transportation printed on the package must be followed.

Please do not forget… Every recycled material is an

indispensable source for the nature and for our national resources.

If you wish to contribute to recycling the packaging materials, you can get further information from the environmental bodies or local

authorities.

Before operating your refrigerator

Before starting to use your refrigerator check the following:

1.Is the interior of the refrigerator dry and can the air circulate freely in the rear of it?

2.Please install the 2 plastic wedges as illustrated in the figure. Plastic wedges will provide the required distance between your refrigerator and the wall in order to allow the air circulation. (The illustrated figure is

only an example and does not match exactly with your product.)

3.Clean the interior of the refrigerator as recommended in the “Maintenance and cleaning” section.

4.Plug the refrigerator into the wall outlet. When the fridge door is open, the fridge compartment interior light will come on.

5.You will hear a noise as the compressor starts up. The liquid and gases sealed within the refrigeration system may also give rise to noise, even if the compressor is not running and this is quite normal.

6.Front edges of the refrigerator may feel warm. This is normal. These areas are designed to be warm to avoid

condensation

Electric connection

Connect your product to a grounded socket which is being protected by a fuse with the appropriate capacity.

Important:

The connection must be in compliance with national regulations.

The power cable plug must be easily accessible after installation.

The specified voltage must be equal to your mains voltage.

Extension cables and multiway plugs must not be used for connection.

8 EN

BA damaged power cable must be replaced by a qualified electrician.

BProduct must not be operated before it is repaired! There is danger of

electric shock!

Disposing of the packaging

The packing materials may be dangerous for children. Keep the packing materials out of the reach of children or dispose of them by classifying them in accordance with the waste instructions. Do not

dispose of them along with the normal household waste.

The packing of your refrigerator is produced from recyclable materials.

Disposing of your old refrigerator

Dispose of your old refrigerator without giving any harm to the environment.

•You may consult your authorised dealer or waste collection center of your municipality about the disposal of your refrigerator.

Before disposing of your refrigerator, cut out the electric plug and, if there are any locks on the door, make them inoperable in order to protect children

against any danger.

Placing and Installation

AIf the entrance door of the room where the refrigerator will be installed is not wide enough for the refrigerator to pass through, then call the authorised service to have them remove the doors of your refrigerator and pass it sideways through the door.

1.Install your refrigerator to a place that allows ease of use.

2.Keep your refrigerator away from heat sources, humid places and direct sunlight.

3.There must be appropriate air ventilation around your refrigerator in order to achieve an efficient operation. If the refrigerator is to be placed in a recess in the wall, there must be at least 5 cm distance with the ceiling and at least 5 cm with the wall. If the floor is covered with a carpet, your product must be elevated 2.5 cm from the floor.

4.Place your refrigerator on an even floor surface to prevent jolts.

5.Do not keep your refrigerator in ambient temperatures under 10°C.

Adjusting the legs

If your refrigerator is unbalanced;

You can balance your refrigerator by turning the front legs of it as illustrated in the figure. The corner where the leg exists is lowered when you turn

in the direction of black arrow and raised when you turn in the opposite direction. Taking help from someone to slightly lift the refrigerator will facilitate this process.

9 EN

Replacing the interior light bulb

Should the light fail to work, proceed as follows.

1- Switch off at the socket outlet and pull out the mains plug.

You may find it useful to remove shelves for easy access.

2- Use a flat tipped screwdriver to remove the light diffuser cover.

3- First check that the bulb hasn’t worked loose by ensuring it is screwed securely in the holder. Replace the plug and switch on.

If the bulb works, replace the light cover by inserting the rear lug and pushing up to locate the front two lugs.

4- If the light still fails to work, switch off at the socket outlet and pull out the mains plug. Replace the bulb with a new 15 watt (max) screw cap (SES) bulb.

5- Carefully dispose of the burnt-out light bulb immediately.

Replacement light bulb can easily be obtained from a good local electrical or DIY store.

10 EN

4 Preparation

CYour refrigerator should be installed at least 30 cm away from heat sources such as hobs, ovens, central heater and stoves and at least 5 cm away from electrical ovens and should not be located under direct sunlight.

CThe ambient temperature of the room where you install your

refrigerator should at least be 10°C. Operating your refrigerator under cooler conditions than this is not recommended with regard to its efficiency.

CPlease make sure that the interior of your refrigerator is cleaned thoroughly.

CIf two refrigerators are to be installed side by side, there should be at least 2 cm distance between them.

CWhen you operate your refrigerator for the first time, please observe the following instructions during the initial six hours.

-The door should not be opened frequently.

-It must be operated empty without any food in it.

-Do not unplug your refrigerator. If a power failure occurs out of your control, please see the warnings in the “Recommended solutions for the problems” section.

COriginal packaging and foam materials should be kept for future transportations or moving.

11 EN

Loading...
+ 27 hidden pages