Behringer 302USB Quick Start Guide

Page 1
Quick Start Guide
XENYX 302USB
Premium 5-Input Mixer with XENYX Mic Preamp and USB/Audio Interface
V 6.0
Page 2
1. Read these instructions.
15. The apparat us shall be connected
your coopera tion in the correct di sposal
more information about where you can
2 3Quick Start GuideXENYX 302USB
are subjec t to change without notice.
Atención
contacto s: dos polos y la puesta a
contacto, respectivamente, son los que
mesa especicados
tormentas o s i no va a utilizarlo durante
Important Safe ty Instructions
Terminals marked with this symbol carry
This symbo l, wherever it
appears, ale rts you to the
presence of uninsulated dangerous voltage inside the enclosure
- voltage that may b e sucient to constitu te a risk ofshock.
This symbo l, wherever it
appears, ale rts you to
important operating and maintenance instructions in the accompanying literature. Please read themanual.
Caution
To reduce the risk of
electr ic shock, do not remove the top cover (or the r ear section). No user serviceable parts inside. Refer servicing to qualiedpersonnel.
Caution
To reduce the risk of
re or elec tric shock, do not expos e this appliance to rain and moisture. Th eapparatus shall not be expose d to dripping or splashing liquids and no ob jects lled with liquids, such as v ases, shall be placed on the apparatus.
Caution
These service instruc tions
are for use by qua lied service p ersonnel only. Toreduce the risk of ele ctric shock do not perform any servicing other than that contained in the operation instructions. Repairshave to b e performed by qualied servicepersonnel.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instruc tions.
5. Do not use this apparatus
near water.
6. Clean only w ith dry cloth.
7. Do not bloc k any ventilation
openings. Install in accordance with the manufacturer ’s instructions.
8. Do not ins tall near any heat sources such a s radiators, heat regis ters, stoves, or othe r apparatus (including ampliers) that produce heat.
9. Do not defeat the sa fety purpose of the polari zed or grounding-typ e plug. A polari zed plug has two blades with one wider than the other. A grounding -type plug has two blad es and a third grounding prong. The wide blade or the third prong are provided for your saf ety. Ifthe provided plug does not t into y our outlet, consult an elect rician for replacement of th e obsolete outlet.
10. Protect the power cord f rom being walked on or pinc hed particularly at plugs, convenience receptacles, and the point wh ere they exit from the apparatus.
11. Use only attachments/accessories specie d by themanufacturer.
12. Use only wi th the cart , stand, tripod, bracket, or table spec ied by the manufacturer,
orsold with the apparat us. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip -over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualied service personnel. Servicing is require d when the appa ratus has been damaged in any way, such as power suppl y cord or plug is damage d, liquid has been spilled or obje cts have fallen into the apparatus, t he apparatus has been expose d to rain or moisture, does not operate nor mally, or has beendr opped.
to a MAINS socket ou tlet with a protective earthing connection.
16. Wh ere the MAINS plug or an appliance coup ler is used as the disconnect device, the disconnect device shall remain readily operable.
17. Corr ect disposal of this product: This symbol indicates that this product must not
be disposed of with household waste, according to the WEEE Direc tive (2012/19/EU) and your national law. This prod uct should be taken to a collec tion center licensed for the recyc ling of waste electr ical and electronic equipment (EEE). The mishandlin g of this type of waste could have a possib le negative impact on the environment and human health due to potentially hazardous substances that are generally associate d with EEE. At the same time,
of this produc t will contribute to the ecient use of natural resources. For
take your waste equipment for recycli ng, please contact your lo cal city oce, or your household waste collection se rvice.
18. Do n ot install in a conned space, such as a book c ase or similar unit.
19. Do not place naked ame sources, suc h as lighted candles, on the apparatus.
20. Please keep the environmental aspect s of battery dispo sal in mind. Batteri es must be disposed- of at a battery collection point.
21. This apparatus may be used i n tropical an d moderate climates up to 45°C.
LEGAL DISCLAIMER
Music Tribe accepts n o liability for any loss which may b e suered by any person who relies either wholly or in part u pon any description, photograph, or statement contained herein. Technical specications, appearances and other information
All trademar ks are the propert y of their respective owners. Midas, Klark Teknik, Lab G ruppen, Lake, Tannoy, Turbosound, TC Electronic, TC Helicon, Behringer, Bugera, Oberheim, Auratone and Coolaudio are trademarks or registered trad emarks of Music Tribe Global B rands Ltd. © Music Tribe Global B rands Ltd. 2021 All rights rese rved.
LIMITED WARRANTY
For the applic able warranty terms a nd conditions and additional information regarding Music Tribe’s Limited Warranty, please see complete details online at musictribe.com/warranty.
Instrucciones de seguridad
Las terminales marcadas con este símb olo
transportan corr iente eléctr ica de magnitud sucie nte como para const ituir un riesgo de desc arga eléctr ica. Utilicesolo cable s de altavoz profesionales y de alta calidad con conecto res TS de 6,3 mm o de bayoneta prejados. Cualquier otra instalación o modicación debe ser realizada únicamente p or un técnicocualicado.
Este símbolo, siempre que
aparece, leadv ierte de la
presencia de voltaje peligroso si n aislar dentro de la caja; estevoltaj e puede ser suciente par a constitu ir un riesgo dedescarga .
Este símbolo, siempre que
aparece, leadv ierte sobre
instrucciones operativas y de mantenimiento que aparecen en la documentación adjunta. Por favor, leaelmanual.
Para reducir e l riesgo de
descarga e léctrica, no quite la tapa (olapar te posterior). Nohay piezas en e l interior del equipo que puedan ser r eparadas por el usuario. Sies ne cesario, póngase en contacto con personal cuali cado.
Atención
Para reducir e l riesgo
de incendio o des carga eléctr ica, no exponga este ap arato a la lluvia, humeda d o alguna otra fuente que pueda sal picar o derramar algún líquido sobr e el aparato. Nocoloque ningún tipo de recipiente para líquidos sobre elapar ato.
Atención
Las instrucciones
de servicio deben llevarlas a cabo exclusivamente personal c ualicado. Paraevitar el riesgo de una d escarga eléctr ica, no realice reparaciones que no se encuentren d escritas en el manual de operaciones. Lasreparaciones deben ser realizadas exclusivamente por personalcualicado.
1. Lea las instrucciones.
2. Conserve e stas instruccion es.
3. Pres te atención a todas
las advertencias.
4. Siga todas las instrucciones.
5. No use e ste aparato cerca
del agua.
6. Limpie es te aparato con un paño seco.
7. No bloquee las aberturas de ventilación . Instale el equipo de acuerdo con las instrucciones del fabricante.
8. No instal e este equipo cerca de fuentes de calor tales como radiadores, acumuladore s de calor, estufas u otros aparatos (incluyendo amplicadores) que puedan producir calor.
9. No elimine o deshabilite nunca la conexión a ti erra del aparato o del cable de alimentación de corriente. Unenchufe po larizado tiene dos polo s, uno de los cuale s tiene un contacto más ancho que el ot ro. Una clavija con puest a a tierra dispone de tres
tierra. El con tacto ancho y el tercer
garantizan una mayor seguridad. Si el enchufe suministrado con el equipo no concuerda co n la toma de corriente, consulte con un el ectricista par a cambiar la toma d e corriente obsoleta.
10. Coloque el cable de suminis tro de energía de manera que no pueda ser pisado y que es té protegido de objetos alados. As egúrese de que el cable de suministro de energía esté protegido, especialm ente en la zona de la clavija y en el punto dond e sale del aparato.
11. Use únicamente los dispositivos o accesorio s especicados por el fabricante.
12. Use
únicamente la carretilla, plataforma, trípode, soporte o
por el fabricante o suministrados junto con el equipo. Alt ransportar el equi po, tenga cuidado p ara evitar daños y caídas al tropezar con algún obstác ulo.
13. Desenchufe el equipo durante
un periodo largo.
14. Confíe las reparaciones únicamente a servicios técnicos cualicados. La unidad requiere mantenimiento siempre que haya sufrido al gún daño, si el cable de suministro de energía o el enchufe presenta ran daños, sehubiera derramado un líquido o hubieran caído objetos dent ro del equipo, si el aparato hubiera es tado expuesto a la hume dad o la lluvia, si ha dejado d e funcionar de manera norma l o si ha sufrido algún golpe o caída.
15. Al conect ar la unidad a la toma de corriente el éctrica asegúr ese de que la conexión disponga de una unión atierra.
16. Si e l enchufe o conector de red sirve c omo único medio de desconexión, éste debe ser accesiblefácilmente.
Page 3
4 5Quick Start GuideXENYX 302USB
17. Cómo debe
de sus respectivos dueños. Midas,
choc élec trique, ne pas ouvrir le c apot
mentation f ourni ne correspond pa s à
17. Mise au r ebut
respec tifs. Midas, Klark Teknik,
Behringer, Bugera, Oberheim, Auratone
Global Brands Ltd. © Music Tribe Global
Pour connaître les termes et conditions
deshacers e de este aparato: Es te símbolo indica que es te aparato
no debe ser tratado como basura or gánica, según lo indicado en la D irectiva WEEE (2012/19/ EU) y a las normativa s aplicables en su país. En lugar de el lo deberá llevarlo al punto limpio más cercano para el reciclaje de s us elementos eléctr icos/ electr ónicos (EEE). Al hacer esto estar á ayudando a preve nir las posibles consecuencias negativas para el medio ambiente y la salu d que podrían ser provocadas por una gestión inadecuada de este tipo d e aparatos. Además, el reciclaje d e materiales ayudará a conservar los recur sos naturales. Para más informa ción acerca del reciclaj e de este aparat o, póngase en con tacto con el Ayuntamiento d e su ciudad o con el punto limpio local.
18. No instale es ta unidad en un espacio muy r educido, tal como encastrada en una librería o similar.
19. No coloque objetos con llama, como una vela ence ndida, sobre este aparato.
20. Tenga presente s todas las advertenc ias relativas al reciclaj e y correcta eliminación de las pilas. Las pilas deben ser siempre eliminadas en un punto limpio y n unca con el resto de la basura org ánica.
21. Puede usar este aparato e n lugares con cli mas tropicales y moderados que soporten temperaturas de hasta 45°C.
NEGACIÓN LEGAL
Music Tribe no admite ningún tipo de responsabilidad por cualquier daño o pérdida que pudiera sufrir cualquier persona por conar total o parcialmente en la descripciones, fotografías o armaciones contenidas en este documento. Las especicaciones técnicas, imágenes y otras informaciones contenidas en este documento están sujetas a modicaciones sin previo aviso. Todas las marcas comerciales que aparecen aquí son propiedad
Klark Teknik, Lab G ruppen, Lake, Tannoy, Turbosound, TC Electronic, TC Helicon, Behringer, Bugera, Oberheim, Auratone y Coolaudio son marcas comerciales o marcas registr adas de Music Tribe Global Brands Ltd. © Music Tribe G lobal Brands Ltd. 2021 Reser vados todos los derechos.
GARANTÍA LIMITADA
Si quiere conocer los detalles y condiciones aplicables de la garantía así como información adicional sobre la Garantía limi tada de Music Tribe, consulte online toda la información en la web musictribe.com/warranty.
Consignes de sécurité
Les points r epérés par ce symbole portent une
tension électrique susante po ur constituer un risque d’électrocution. Utilisez uniquement des câbles d’enceintes professionnels de haute qualité ave c ches Jack mono 6,35 mm ou ches à verr ouillages déjà installée s. Touteautre ins tallation ou modication doit être eectuée uniquement par un personnel qualié.
Ce symbole aver tit de la
présence d’une tension
dangereuse e t non isolée à l’intérieu r de l’appareil - elle p eut provoquer des chocs électriques.
Attention
Ce symbol signale les
consignes d’utilisation et d’entre ! Tienimp ortantes dans la document ation fournie. Lisez les consignes de sécurité du manuel d’utilisatio n del’appareil.
Attention
Pour éviter tout r isque de
de l’appareil ni démo nter le panneau arrière. L’intérieur de l’appareil ne possède aucun élément réparable par l’utilisateur. Lais sertoute réparation à un professionnelqualié.
Attention
Pour réduire le s risques
de feu et de cho c électrique, n’exposez pas cet appareil à la pluie, à la moisissu re, auxgouttes ou aux éclabo ussures. Ne posez pas de récipient contenant un liquide sur l’appareil (unvase par e xemple).
Attention
Ces consignes de
sécurité et d’entretien sont destinées à un personnel qualié. Pour évi ter tout risque de choc électrique, n’eectuez aucune réparation sur l’appareil qui ne soit décrite p ar le manuel d’utilisation. Les éventuelle s réparations doivent être eectuées uniquement par un technicienspécialisé.
1. Lisez ces consignes.
2. Conserve z ces consignes.
3. Respe ctez tous les aver tissements.
4. Respectez toutes les
consignes d’utilisation.
5. N’utilisez jamais l’appareil à proximité d’un liquide.
6. Nettoy ez l’appareil avec u n chion sec.
7. Veillez à ne pas empêcher la bonne ventilat ion de l’appareil via ses ouïes de ventila tion. Respectezles consignes du fabricant concernant l’install ation del’appareil.
8. Ne placez pas l ’appareil à proximité d ’une source de chale ur telle qu’un chauage, une cuisinière ou tout appareil dégageant de la chaleur (y compris un amp li depuissance).
9. Ne supprimez jamai s la sécurité des prise s bipolaires ou des prise s terre. Les pri ses bipolaires possè dent deux contacts de largeur diérente. Leplus large es t le contact de sécur ité. Les prises te rre possèdent deux contact s plus une mise à la terre servant d e sécurité. Si la prise du blo c d’alimentation o u du cordon d’ali-
celles de votre i nstallation élect rique, faites app el à un électricien po ur eect uer le changement de prise.
10. Installez le cordon d’alimentation de telle façon qu e personne ne puisse marcher dess us et qu’il soit protégé d’arêtes coupantes. Assurez-vous que le cordon d’alimentation est sufsamment protégé, notamment au niveau de sa pr ise électrique et de l’endroit où il es t relié à l’appareil; cela est égale ment valable pour une éventuelle rallonge électrique.
11. Utilisez exclusivement des accessoi res et des appareils supplémentaires recommandés par lefabricant.
12. Utilisez exclusivement des chariots, des diables, desprésentoirs,
despieds et d es surface s de travail recommandés p ar le fabrica nt ou livrés avec le produit. Déplacezprécautionneusement tout chariot ou dia ble chargé pour éviter d’éventuelles bles sures en cas dechute.
13. Débranchez l’appareil de la tension sec teur en cas d’orage ou si l’appareil reste inutilisé pendant une longue période de temps.
14. Les travaux d’entretien de l’appareil doiven t être eectués uniquement par du personnel qualié. Aucunentret ien n’est nécess aire sauf si l’appareil est endommagé de quelque façon que ce soi t (dommagessur le cordon d’aliment ation ou la prise par exemple), siun liquide ou un objet a pénétré à l ’intérieur du châssis, si l’appareil a été ex posé à la pluie ou à l’humidité, s’il ne fonctionne pas correc tement ou à la suite d’une chute.
15. L’appareil doit ê tre connecté à une prise secteur dotée d’une protection par mise à la terr e.
16. L a prise électriq ue ou la prise IEC de tout appar eil dénué de bouton marche/arrêt doit rester accessible enpermanence.
appropriée de ce produit: Ce symbole indique qu’en accord
avec la direc tive DEEE (2012/19/EU) et les lois en vigu eur dans votre pays, ce pro duit ne doit pas être jeté avec les déc hets ménagers. Ce produit doi t être déposé dans un point de collec te agréé pour le recyclage des déchets d’équipements électriques et élect roniques (EEE). Une mauvaise man ipulation de ce type de déchets pourrait avoir un impact négatif sur l’environnement et la santé à cause des su bstances potentiellem ent dangereuses généralement associées à ces équipements. En même temps, votre coopér ation dans la mise au rebut de ce produit contribuera à l’utilisation ecace des ressources naturelles. Pour plus d’informations sur l’endroit où vous pouvez d époser vos déchets d’équipements pour le recyclage, veuillez conta cter votre mairie ou votr e centre loca l de collecte des déche ts.
18. N’ins tallez pas l’appareil dans un espace conné tel qu’une bibliothèque ou meuble similaire.
19. Ne placez jamais d’objets enammés, tels que des bougies allumées, sur l’appareil.
20. Gardez à l ’esprit l’imp act environnemental lorsque vous mettez des piles au reb us. Les piles usées doivent être d éposées dans un point de collecte adapté.
21. Cet appareil peut être utilisé sous un climat trop ical ou modéré avec des températures de 45°C maximum.
DÉNI LÉGAL
Music Tribe ne peut êt re tenu pour responsable pour toute perte pouvant être subie pa r toute personne se ant en part ie ou en totalité à toute description, photographie ou armatio n contenue dans ce document. Les caractéristiques, l’apparence et d’autres informations peuvent fair e l’objet de modi cations sans notic ation. Toutes les marques appartiennent à leurs propriétaires
Lab Grupp en, Lake, Tannoy, Turbosound, TC Elec tronic, TC Helicon,
et Coolaudio so nt des marques ou marques dép osées de Music Tribe
Brands Ltd. 2021 Tous droits ré servés.
GARANTIE LIMITÉE
de garantie applicables, ainsi que les informations supplémentaires et détaillée s sur la Garantie Limitée de Music Tribe, consultez l e site Internet musictribe.com/warranty.
Wichtige Sicherheitshinweise
Vorsicht
Die mit dem Symbo l
markierten Anschlüsse führen so vi el Spannung, dassdie Gefahr eines Stromschlags besteht. Verwenden Sie nur hochwertige, professionelle Lautsprecherkabel mit vorinstallierten 6,35 mm MONO-Klinkensteckern oder Lautsprecherstec ker mit Drehverriegelung. Alle anderen Installationen oder Modikationen sollten nur von qualiziertem Fachpersonal ausgeführt werden.
Achtung
Um eine Gefährdung
durch Stromschlag auszuschließen, darf die Geräteabdeckung bzw. Geräterückwandnicht abgenommen werden. ImInnern des Geräts benden sich keine vom Benutzer reparierbaren Teile. Reparaturarbeiten dürfen nur von qualiziertem Personal ausgeführtwerden.
Page 4
Achtung
entsprechend ausgetauscht wird.
zusammen mit Ihren Haushaltsabf ällen
Stellen Sie keine Gegenstände mit
eingetragene Warenzeichen der
exposto à c huva nem à humidade.
Verique particularmente nas chas,
dispositivo para evitar danos provocados
terem caído pa ra dentro do dispositivo;
Direct iva REEE (2012/19/EU) e a legislação
para um centr o de recolha licenciado para
6 7Quick Start GuideXENYX 302USB
Um eine Gefährdung
Stromschlag auszuschließen, darf
durch Feuer bzw.
dieses Gerät weder Regen oder Feuchtigkeit ausgesetzt werden noch sollten Spritzwasser oder tropfende Flüssigkeiten in das Gerät gelangen können. Stellen Sie keine mit Flüssigkeit gefüllten Gegenstände, wie z. B. Vasen, aufdasG erät.
Achtung
Die Service-Hinweise sind
nur durch qualiziertes Personal zu b efolgen. Umeine Gefährdung durch Stromschlag zu vermeiden, führen Sie bitte keinerlei Reparatur en an dem Gerät durch, dienicht in der Bedienungsanleitung beschrieben sind. Reparaturen sind nur von qualiziertem Fachpersonaldurchzuführen.
1. Lesen Sie diese Hinweise.
2. Bewahren Sie diese Hinweise auf.
3. Beachten Sie alle Warnhinweise.
4. Befolgen Sie alle
Bedienungshinweise.
5. Bet reiben Sie das Gerät nicht in der Nähe vonWasser.
6. Reinigen Sie das Gerät mit einem trockenen Tuch.
7. Blockieren Sie nicht die Belüftungsschlitze. Beachten Sie beim Einbau de s Gerätes die Herstellerhinweise.
8. Stellen Sie das Ger ät nicht in der Nähe von Wärmeq uellen auf. Solche Wärmequellen sind z. B. Heizkörper, Herde oder andere Wärme erzeugende Geräte (auch Verstärker).
9. Entfernen Sie in keinem Fall die Sicherheitsvorrichtung von Zweipol- oder geerdeten Steckern. Ein Zweipolstecker hat zwei unterschiedlich breite Steckkontak te. Ein geerdeter Stecker hat zwei Steckkontakte und einen dritten Erdungskontakt. Derbreitere Ste ckkontakt oder der zusätzliche Erdungskontakt dient Ihrer Sicherheit. Falls das mitgelieferte Steckerformat nicht zu Ihrer Steckdose passt, wend en Sie sich bitte an einen Elektriker, damit die Steckdose
10. Verlegen Sie das N etzkabel so, dass es vor Tritte n und scharfen Kanten geschützt ist und nicht beschädigt werden kann. Ach ten Sie bitte insbesondere im Bereich der Stecker, Verlängerungskabel und an der Stelle, an der das Net zkabel das Gerät verläss t, aufausreichendenSchut z.
11. Das Gerät muss je derzeit mit intaktem Schutzlei ter an das Stromnetz angeschlossen sein.
12. Sollte der Hauptnet zstecker oder eine Gerätesteckdose die Funktionseinheit zum Abschalten sein, muss diese immer zugänglich sein.
13. Verwenden Sie nur Zusatzgeräte/ Zubehörteile, dielaut Hersteller geeignet sind.
14. Verwenden Sie nur Wagen, Standvorrich­tungen, Stative, Halter oder Tische,
die vom Hersteller benannt oder im Lieferumfang des Geräts enthalten sind. Falls Sie einen Wagen benutzen, seien Sie vorsichtig beim Bewegen der Wagen- Gerätkombination, umVerletzungen durch Stolpern zuvermeiden.
15. Ziehen Sie den Netzstecker bei Gewitter oder wenn Sie das Gerät längere Zeit nicht benutzen.
16. L assen Sie alle Wartungsarbeiten nur von qualiziertem Service­Personal ausführen. EineWartung ist notwendig, wenn das Gerät in irgendeiner Weise beschädigt wurde (z. B. Beschädigung des Netzkabels oder Steckers), Gegenstände oder Flüssigkeit in das Geräteinnere gelangt sind, das Gerät Regen oder Feuchtigkeit ausgesetzt wurde, das Gerät nicht ordnungsgemäß funktioniert oder auf den Boden gefallen ist.
17. Korrekte
Entsorgung dieses Produkts: Dieses Symbol weist darauf h in, das
Produkt entsprechend der WEEE Direk tive (2012/19/EU) und der jeweiligen nationalen Gesetze nicht
zu entsorg en. DiesesProdukt s ollte bei einer autorisierten Sammelstelle für Recycling elektrischer und elektronischer Geräte (EEE) abgegeben werden. Wegen bedenklicher Substanzen, diegenerell mit elektrischen und elektronischen Geräten in Verbindung stehen, könnte eine unsachgemäße Behandlung dieser Abfallart eine negative Auswirkung auf Umwelt und Gesundheit haben. Gleichzeitig gewährleistet Ihr Beitr ag zur richtigen Entsorgung dieses Produkt s die eektive Nut zung natürliche r Ressourcen. Fürweitere Informationen zur Entsorgung Ihrer Geräte bei einer Recycling-Stelle nehmen Sie bitte Kontakt zum zuständigen städtischen Büro, Entsorgungsamt oder zu Ihrem Haushaltsabfallentsorgerauf.
18. Inst allieren Sie das Gerät nicht in einer beengten Umgebung, zum Beispiel Bücherregal oder ähnliches.
19.
oenen Flammen, etwa brennende Kerzen, auf das Ge rät.
20. Beachten Sie bei der Entsorgung von Batter ien den Umweltschutz­Aspekt. Batterien müssen bei einer Batterie -Sammelstelle entso rgt werden.
21. Dieses Gerät ist in tropischen und gemäßigten Klimazonen bis 45° C einsetzbar.
HAFTUNGSAUSSCHLUSS
Music Tribe übernimmt keine Haftung für Verluste, die Personen entstanden sind, die sich gan z oder teilweise auf hier enthaltene Beschreibungen, Fotos oder Aussagen verlassen haben. Technische Daten, Erscheinungsbild und andere Informationen können ohne vorherige Ankündigung geändert werden. Alle Warenzeichen sind Eigentum der jeweiligen Inhaber. Midas, Klark Teknik, Lab Gruppen, L ake, Tannoy, Turbosound, TC Electron ic, TC Helicon, Behringer, Bugera
, Oberheim, Auratone
Coolaudio sind Warenzeichen oder
und
Music Tribe Global Brands Ltd. © Music Tribe Global B rands Ltd. 2021 Alle Rechte vorbehalten.
BESCHRÄNKTE GARANTIE
Die geltenden Garantiebedingungen und zusätzliche Informationen bezüglich der von Music Tribe gewährten beschränkten Garantie nden Sie online unter musictribe.com/warranty.
Instruções de Segurança Importantes
Aviso!
Terminais marcados
com o símbolo c arregam corrente elétrica de magnitude suciente pa ra constituir um risco d e choque elétrico. Use apenas cabos de alto-falantes de alta qualidade com plugues TS de ¼" ou plugues com trava de torção pré-instalados. Todas as outras ins talações e modicaçõ es devem ser efetuadas p or pessoasqualicadas.
Este símbo lo, onde quer
que o encontre, ale rta-o
para a leitur a das instruções de manuseamento que acompanham o equipamento. Por favor leia o manual deinstruções.
Atenção
De forma a dimi nuir
o risco de choq ue eléctr ico, nãoremover a cobertur a (ouasecção de trá s). Não existem peç as substitu íveis por parte do utili zador no seu interior. Para es se efeito recorrer a um técnicoqualicado.
Atenção
Para reduzir o r isco de
incêndios ou choques eléctr icos o aparelho não deve ser
Alémdisso, não deve s er sujeito a salpicos, nem d evem ser colocados em cima do aparel ho objectos contendo líquidos, taiscomojarras.
Atenção
Estas ins truções de
operação devem ser utilizada s, emexclusivo, por técnicos de assistência qualicados. Para evitar choques elé ctricos não proce da a reparações ou intervenções, que não as indicad as nas instruções de operaçã o, salvo se poss uir as quali-cações necess árias. Para evitar choques elé ctricos não proce da a reparações ou intervenções, que não as indicad as nas instruções de operação. S ó o deverá fazer se possuir as qualicaçõesnecessárias.
1. Leia estas in struções.
2. Guarde estas instruções.
3. Pres te atenção a todos os avisos.
4. Siga todas as in struções.
5. Não utilize este dispositivo perto
de água.
6. Limpe ape nas com um pano seco.
7. Não obst rua as entradas de
ventilação. Ins tale de acordo com as instruções do fabricante.
8. Não instale perto de quaisquer fontes de cal or tais como radiadores, bocas de ar qu ente, fogões de sala ou outros aparelhos (incluindo amplicadores) que produzam calor.
9. Não anule o object ivo de seguranç a das chas polarizadas ou do tipo de ligaç ão à terra. Uma cha polariza da dispõe de duas palhetas sendo uma mais lar ga do que a outra. Uma cha do tipo li gação à terra dispõe de duas palhet as e um terceiro dente de ligação à ter ra. A palheta larga ou o terceiro dente são fornecidos para sua seguranç a. Se a cha fornecida não encaixar na sua tomada, consulte um elect ricista para a subst ituição da tomada obsoleta.
10. Proteja o cabo de alimentaç ão de pisadelas ou apertos, especialmente nas chas, ex tensões, e no local de saída da unidade. Certique-se de que o cabo elé ctrico está prote gido.
nos receptá culos e no ponto em que o cabo sai doap arelho.
11. O aparelho tem de es tar sempre conect ado à rede eléctric a com o condutor de pr otecção intacto.
12. Se utiliz ar uma cha de rede princ ipal ou uma tomada de aparelhos para desligar a unidade de funciona mento, esta deve estar sempre acessível.
13. Utilize apenas ligações/acessórios especic ados pelofabrican te.
14. Utilize apenas
com o carrin ho, estrutura, tripé, suporte, ou m esa especicados pelo
fabricante ou vendidos com o dis positivo. Quandoutili zar um carrinho, tenha cuidado ao mover o conjunto carrinho/
pela terpidação.
15. Desligue este dispositivo durante as trovoadas ou q uando não for utilizado durante longos períodos detempo.
16. Qualquer tipo de reparação deve ser sempr e efectuado por pessoal qualicado. É necessária uma reparação sempre que a unidade tiver sido de alguma forma danicada, como por exemp lo: no caso do cabo de alimentação ou cha se encontrarem danicados; naeventualidade de líquido ter sido derramado ou objectos
no caso da unid ade ter estado expos ta à chuva ou à humid ade; seesta não funcionar normalmente, ou se tiver caído.
17. Correcta eliminação
deste prod uto: este símbolo indi ca que o produto não de ve ser eliminado juntamente
com os resíduos domésticos, segundo a
nacional. Es te produto deverá ser lev ado
a reciclage m de resíduos de equipamentos eléctricos e elec trónicos (EEE). O tratamento inc orrecto deste ti po de resíduos po de ter um eventual
Page 5
impacto negativo no ambiente e na
elettr iche, non esporre ques to
esclusivamente a personale qualic ato.
lame, una più larga dell'altra. Una spina
12. Utilizzare
eciente del le risorse naturali. Per
Aansluitingen die gemerkt
op belangrijke bedienings
8 9Quick Start GuideXENYX 302USB
saúde humana devido a substâncias potencialmente perigosas que estão geralmente associadas aos EEE. Ao mesmo tempo, a sua col aboração para a eliminação co rrecta deste p roduto irá contribuir para a utilização eciente dos recurs os naturais. Paramais info rmação acerca dos loc ais onde poderá deixa r o seu equipamento usado para reciclagem, é favor contactar os serviços municip ais locais, a enti dade de gestão de resídu os ou os serv iços de recolha de resíduosdomésticos.
18. Não i nstale em lugares connados, ta is como estantes ou unidades similares.
19. Não coloque fontes de chama, tais como ve las acesas, sobre o aparelho.
20. Favor, obedecer os asp ectos ambientais de d escarte de bateria. Baterias deve m ser descartadas e m um ponto de coletas de baterias.
21. Esse aparelho pode se r usado em climas tropi cais e moderados até 45°C.
LEGAL RENUNCIANTE
O Music Tribe não se resp onsabiliza por perda algu ma que possa ser sofrida por qualquer pessoa que dependa, seja de maneira completa ou parcial, de qualquer descrição, fotograa, ou declaração aqui contidas. Dados técnicos, aparências e outras informações est ão sujeitas a modicações sem aviso prévio. Todas as marcas são p ropriedade de seus respectivos donos. Midas, Klark Teknik, Lab G ruppen, Lake, Tannoy, Turbosound, TC Elec tronic, TC Helicon, Behringer, Bugera
, Oberheim, Auratone e Coolaudio são marcas ou marcas registr adas do Music Tribe Global Brands Ltd. © Music Tribe Global B rands Ltd. 2021 Todos direitos reservados.
GARANTIA LIMITADA
Para obter os ter mos de garantia aplicáveis e cond ições e informações adicionais a respeito da garantia limitada do Mus ic Tribe, favor veri car detalhes na í ntegra através do website musictribe.com/warranty.
Informazioni importanti
Attenzione
I terminali contrassegnati
con il simbolo conducono una corrente el ettrica sucien te a costitui re un rischio di scossa el ettrica. Usareunicam ente cavi per altoparlanti (Speaker) d’elevata qualità con connetto ri jack TS da ¼"pre-installati. Ognialtra in stallazione o modic a deve essere eett uata esclusivamente da personale tecnico qualicato.
Attenzione
Questo simbolo, ovunque
appaia, avver te della presenza di una tensione pericolosa non isolata all'i nterno dello chassis, tensione che può essere suciente per costitui re un rischio di scossa el ettrica.
Attenzione
Questo simbolo,
ovunque appaia, segnala import anti istruzioni oper ative e di manutenzione nella documentazione allegata. Si invita a leggere il manuale.
Attenzione
Per ridurre il r ischio di
scosse elettriche, non rimuovere il coperchio superiore (o la sezione posteriore). All'interno non ci sono par ti riparabili dall'utente. Per la manutenzione rivolgersi a perso nale qualicato.
Attenzione
Per ridurre il rischio
di incendi o scos se
apparecch io a pioggia e umidità. L'apparecch io non deve essere espos to a gocciolio o schizzi di liquidi e nessun oggetto contenente liquidi, come vasi, deve essere co llocato sull'apparecchio.
Attenzione
Queste istruzioni di servizio sono destinate
Per ridurre il r ischio di scosse elettriche non eseguire interventi di manutenzione diversi da quelli contenuti nel manuale di istruzioni. Le riparazioni devono essere eseguite da personale di assistenza qualic ato.
1. Leggere queste istruzioni.
2. Conservare queste istruz ioni.
3. Pres tare attenzione a tut ti gli
avvisi.
4. Applicare tutte le istru zioni.
5. Non utilizzare questo dispositivo
vicino l'acqua.
6. Pulire esclusivamente con un panno asciutto.
7. Non blocc are le aperture di ventilazione. Installare in conformità con le istru zioni del produttor e.
8. Non installare vicino a fonti di calore come radiatori, termoregolatori, stufe o alt ri apparecchi (inclusi amplicatori) che producono calore.
9. Non escludere la sic urezza fornit a dalla spina polar izzata o con messa a terra. Una spina p olarizzata ha due
con messa a ter ra ha due lame e un terzo polo di m essa a terra. La lama larga o il terzo p olo sono forniti per la vostra sic urezza. Se la spina for nita non si adatt a alla presa, consultare un elettr icista per la sostit uzione della presa obsoleta.
10. Proteggere il cavo di alimentazione dal calpestio o essere schiacciato in particolare alle spine, prese di cor rente e il punto in cui esce dall'apparecchio.
11. Utilizzare esc lusivamente dispositivi/accessori specic ati dal produttore.
solo carrelli, supporti, treppiedi, stae o tavo li indicati dal
produttore o venduti con l'apparecchio. Utilizzando un carrello, prestare attenzione quando si sposta la combinazione carrello/ apparecchio per evitare lesioni dovute al ribaltamento.
13. Scollegare questo apparecchio durante i tempo rali o se non è utilizzato per lunghi periodi di tempo.
14. Per tutte l e riparazioni rivolge rsi a personale qualicato. La manutenzione è necessaria quando l'apparecchio è danneggiato in qualsiasi modo, come danneggiamento del cavo di alimentazione o della spina, versamento di liquido o oggetti caduti nell'apparecchio, se l'apparecchio è stato espo sto a pioggia o umidità, se non funziona normalmente o è caduto.
15. L'apparecchio deve essere collegato a una pr esa di corrente elettr ica con messa a terra di protezione.
16. e la sp ina o una presa del dispositivo è utilizzata come dispositivo di disconnessione, deve essere facilmente utilizzabile.
17. Smaltimento
corretto di ques to prodotto: questo simbolo indica che questo dispositivo non
deve essere sma ltito insieme ai riuti domestici, secondo la Dirett iva RAEE (2012/19 / UE) e la vostra legislazione nazionale. Questo prodot to deve essere p ortato in un centro di raccolta autorizzato per il riciclaggio di riuti di apparecchiature elettriche ed elettroniche (RAEE). La cattiva gestione di questo tip o di riuti potrebbe aver e un possibile impatto negativo sull'ambiente e sulla salute umana a causa di so stanze potenzialmente pericolose che sono generalmente associate alle apparecchiature elettriche ed elettroniche. Nello stesso tempo la vostra collaborazione al corretto smaltimen to di questo prodotto contribuirà all'utilizzo
ulteriori informazioni su dove è possibile trasportare le apparecchiature per il ricic laggio vi invitiamo a contattare l'ucio comunale locale o il servizio di raccolta dei riuti domestici.
18. Non installare in uno spazio ristret to, come in una libreria o in una struttura simile.
19. Non collocare sul dispositivo fonti di amme libere, co me candele accese.
20. Per lo smaltimento delle batterie, tenere in considerazione gli aspetti ambientali. Le batterie devono essere smaltite in un pu nto di raccolta delle batterie es auste.
21. Questo apparecchio può essere usato in climi t ropicali e temperati no a 45°C.
DISCLAIMER LEGALE
Music Tribe non si assum e alcuna responsabilità per eventuali danni che posson o essere subiti da chiunq ue si adi in tut to o in parte a qualsiasi descrizione, fotograa o dichiarazione contenuta qui. Speciche tecniche, aspetti e altre informazioni sono soggette a modiche senza preavviso. Tutti i marchi son o di proprietà dei rispet tivi titolari. Midas, K lark Teknik, Lab Grup pen, Lake, Tannoy, Turbosound, TC Elec tronic, TC Helicon, Behringer, Bugera, Oberheim, Auratone e Coolaudio sono marchi o marchi registr ati di Music Tribe Global Brands Ltd. © Music Tribe Global B rands Ltd. 2021 Tutti i diritti r iservati .
GARANZIA LIMITATA
Per i termini e le cond izioni di garanzia applicabili e le informazioni aggiuntive relative alla gar anzia limitata di Music Tribe, consultare online i dettagli completi su musictribe.com/warranty.
Belangrijke veiligheidsvoorschriften
Waarschuwing
zijn met het s ymbool voeren een zodanig hoge spanning dat ze een risico vor men voor elektrisc he schokken. Gebruikuitsluitend kwalitatief hoogwaardige, in de handel verkrijgbare luidsprekerkabels die voorzie n zijn van ¼"TS stekkers. Laatuitsluitend gekwaliceerd persone el alleoverige installatie - of modicatiehandelingenuitvoeren.
Dit symbo ol wijst u altijd
- en onderhoudsvoorschrif ten in de bijbehorende documenten. Wijvragen u dringend de handleiding te lezen.
Attentie
Verwijder in geen
geval de bovens te afdekking (vanhet achterste gedeelte) anders be staat er gevaar voor een elektrische schok. Hetapparaat bevat geen te onderhouden onderdelen. Reparatiewerkzaamheden mogen uitsluitend door gekwaliceerd personeel uitgevoerdworden.
Attentie
Om het risico o p brand
of elektrische schokken te beperken, dient u te voorkomen dat dit apparaat wordt blootgesteld aan regen en voc ht. Hetapparaat mag niet worden b lootgesteld aan neerdruppelend of opspattend water en er mogen geen met water gevulde voorwer pen – zoals een vaas – op het apparaat wordengezet.
Attentie
Deze
onderhoudsinstructies zijn uitsluitend bedoeld voor gekwaliceerd onderhoudspersoneel. Omelektrische schokken te voorkomen, mag u g een andere
Page 6
10 11Quick Start GuideXENYX 302USB
onderhoudshandelingen verrichten dan
13. Gebruik uitsluitend door de
bij aan een doelmatiger gebruik van de
1. Läs dessa anvisningar.
15. Dra ur anslutningskontakten und
kommit in i appar aten, eller när den har
människors hälsa, påverkas negativt på
Placera inte källo r med öppen eld,
in de bedieningsinstructies vermeld staan. Reparatiewerkzaamheden mogen alleen uitgevoerd worden door gekwaliceerd onderhoudspersoneel.
1. Lees deze voorschriften.
2. Bewaar deze voorschriften.
3. Neem alle waarschuwingen
in acht.
4. Volg alle voor schriften op.
5. Gebr uik dit apparaat niet in de
buurt vanw ater.
6. Reinig het uitsluitend met een drogedoek.
7. Let erop ge en van de ventilatie­openingen te bedekken. Plaats en installee r het volgens de voor- schriften van de fabrikant.
8. Het appar aat mag niet worden geplaats t in de buurt van radiatore n, warmte-uitlaten, kachels of andere zaken (ook verste rkers) diewarmte afgeven.
9. Maak de veiligheid waarin door de polarisatie- of aardingsstekker wordt voorzien, niet ongedaan. Eenpolarisa tiestekker heef t twee bladen, waar vaner een breder is dan het andere. Een aardingsstekker heeft twee blade n en een derde uitsteek sel voor de aarding . Het bredere blad of het derde uit steeksel zijn er vo or uw veiligheid. Moc htde geleverde stekker niet in uw stop contact passen, laat het contac t dan door een elektr icien vervangen.
10. Om beschadiging te voorkomen, moetde str oomleiding zo gelegd worden dat er nie t kan worden over gelopen en dat ze b eschermd is tegen scherpe kanten. Zorg zeker voor voldoende bescherming aan de stekkers, d everlengkabels en het punt waar het netsnoer het apparaat verlaat.
11. Het toestel me t altijd met een intacte aarddraad aan het stro omnet aangeslotenzijn.
12. Wanneer de stekker van het hoofdnetwerk of een apparaatstopcontac t de functionele eenheid voor het uitschakelen is, dientdeze alti jd toegankelijk te zijn.
producent gespeci- ceerd toebehoren c.q. onderdelen.
14. Gebruik het apparaat uitsluitend in combinatie met de wagen, hetstatief,
dedriepoot , de beugel of taf el die door de producent is aangegeven, of die in combinatie met het appar aat wordt verkocht. Bij gebruik van een wagen dient men voorzich tig te zijn bij het verrijden va n de combinatie wagen/apparaat en letsel do or vallen tevoorkomen.
15. Bij onweer en als u he t apparaat langere tijd niet gebruikt, haalt u de stekker uit he tstopcontact.
16. L aat alle voorkomende reparaties door vakkundig en bevoegd personeel uitvoeren. Reparatiewerk-zaamheden zijn nodig als he t toestel op enige wijze beschadigd is geraakt, bijvoorbeeld als de hoofd-stroomkabel of -stekker is beschadi gd, als er vloeistof of voorwerpen in terecht zijn gekomen, als het aan regen o f vochtigheid heeft bloot-ges taan, niet normaal functioneer t of wanneer het isgevallen.
17. Corre cte afvoer van
dit product: dit symbool geef t aan dat u dit produc t op grond van de AEEA-richtlijn
(2012/19/EU) en d e nationale wetgeving van uw land niet met het gewone huishoudelijke afval mag weggooie n. Dit product moet na aoop van de nut tige levensduur naar een ociële inzamelpost voor afgedankte elektrische en elektronische apparatuur (AEEA) worden gebracht, zodat het kan wor den gerecycleerd . Vanwegede potentieel gevaarlijke stoen die in elektrische en elektronische apparatuur kunnen voorkomen, kane en onjuiste afvoer va n afval van h et onderhavige typ e een negatieve invl oed op het milieu en de menselijke gezondheid hebben. Eenjuiste af voer van dit produc t is echter niet alleen beter voor het milieu en de gezondhe id, maardraagt tevens
natuurlijke hul pbronnen. Voormeer informati e over de plaatsen waar u uw afgedankte apparatuur kunt inleveren, kunt u contac t opnemen met uw gemeente of de plaatselijkereinigingsdienst.
18. Inst alleer niet in een kleine ruimte, zoals ee n boekenkast of iets dergelijks.
19. Plaats geen open vlamme n, zoals brandende kaarsen, op het apparaat.
20. Houd rekening met de milieuaspecten van het afvoeren van batterijen. Batterijen moeten bij een inzamelpunt voor batterijen worden ingeleverd.
21. Dit apparaat kan worden geb ruikt in tropische en gematigde klimaten tot 45 ° C.
WETTELIJKE ONTKENNING
Music Tribe aanvaardt geen aansprakelijkheid voor enig verlies dat kan worden geleden door een persoon die geheel of gedeeltelijk vertrouwt op enige beschrijving, foto of verklaring hierin. Technische specicaties, verschijningen en andere informatie kunnen zonder voorafgaande kennisgeving worden gewijzigd. Alle handelsmerken zijn eigendom van hun respectievelijke eigenaren. Midas, Klark Teknik, Lab Gruppen, Lake, Tannoy, Turbosound, TC Electronic, TC Helicon, Behringer, Bugera, Oberheim, Auratone en Coolaudio zijn handelsmerken of gedeponeerde handelsmerken van Music Tribe Global Brands Ltd. © Music Tribe Global Brands Ltd. 2021 Alle rechten voorbehouden.
BEPERKTE GARANTIE
Voor de toepasselijke garantievoorwaarden en aanvullende informatie met betrek king tot de beperkte garantie van Music Tribe, zie de volledige details online op musictribe.com/warranty.
Viktiga säkerhetsanvisningar
Varning
Uttag markerade med
symbolen leder elekt risk strömst yrka som är tillräck ligt stark för att utgör a en risk för elchock. Anv änd endast högkvalitativa, kommersiellt tillgängliga högtalarkablar med förhandsinstallerade ¼"TS­kontakter. Allannan installering eller modikation bör endast utföras av kompetentpersonal.
Den här symbolen
hänvisar till viktiga
punkter om användning och underhå ll i den medfölljande dokumentationen. Varvänlig och läs bruksanvisningen.
Försiktighet
Minska risken för
elektriska stötar genom att aldri g ta av höljet upptill på apparaten (ellerta av b aksidan). Inuti appar aten nns det inga delar som kan repar eras av användaren. Endastkvalicerad pers onal får genomföra reparationer.
Försiktighet
För att minsk a risken
för brand och elektriska stötar ska apparaten skyddas mot regn och f ukt. Apparaten går inte utsät tas för dropp eller spill o ch inga vattenbehållare som vaser etc. fårplaceras p å den.
Försiktighet
Serviceinstruktionen
är enbart avsedd för kvalicerad serviceper sonal. Föratt undvika risker genom elektriska stötar, genomför inga reparationer på apparaten, vilka inte är beskriv na i bruksanvisninge n. Endast kvalicerad fack personal får genomförareparationerna.
2. Spara dessa anvisningar.
3. Beakt a alla varningar.
4. Följ alla anvisningar.
5. Använd i nte apparaten i närheten
av vatten.
6. Rengör end ast med torr trasa.
7. Blockera inte
ventilationsöppningarna. Installeraenligt tillverkarens anvisningar.
8. Installera aldrig intill värmek ällor som värme- element, varmluft sintag, spisareller an nan utrustning som avger värme (inklus iveförstärkare).
9. Ändra aldrig en polariserad eller jordad kon takt. Enpolariserad kontakt har t vå blad – det ena bredare än det andra. En j ordad kontakt har två blad oc h ett tredje jords tift. Det breda blade t eller jordstifte t är till för din säkerhet . Omden medföljande kontakten i nte passar i ditt ut tag, skadu kontak ta en elektriker fö r att få uttaget bytt.
10. Förlägg elkabeln så, at t det inte är möjligt at t trampa på den och att den är skydda d mot skarpa kanter och inte kan skadas . Ge i synnerhet akt på områdena omkring stickkontakterna, förlängningskablarna och på det ställe, där elkabeln lämnar apparaten, ärtillräckligtskyddade.
11. Apparaten måste alltid vara ansluten till elnätet med intaktskyddsledare.
12. Om huvudko ntakten, ellerett apparatuttag, fungerar som avstängningsenhet måste denna alltid varatillgänglig.
13. Använd endast tillkopplingar och tillbehör som angetts av tillverkaren.
14. Använd endast med vagn, stativ, trefot, hållareeller bor d som angetts
av tillverkaren, ellersom sål ts till-sammans med apparaten. O m du använder en vagn, var för siktig, när du för yttar kombinationen vagn-apparat, för att förhindra olycksfall genomsnubbling.
åskväder e ller när apparaten inte ska användas under någon längre tid.
16. L åt kvalicerad pers onal utföra all servi ce. Serviceär nödvändig när apparaten har skadats, t.ex.när en elkabel elle r kontakt är skadad, vätskaeller främmande föremål har
fallit i golve t.
17. Kassera produkten
på rätt s ätt: den här symbolen indikerar att produkten inte ska kastas i
hushållssoporna, enligtWEEE dire ktivet (2012/19/EU) ochgällande, nationell lagstiftning. Produkte n ska lämnas till ett auktoriserat återvinningsställe för elektronisk och elektrisk utrustning (EEE). Om den här sor tens avfall hanteras på fe l sätt kan miljön, och
grund av potentiella risksubstanser som ofta associeras med EEE. Avfallshanteras pro dukten däremot på rätt sät t bidrar detta til l att naturens resurse r används på ett bra sät t. Kontakta kommun, ansvarig förvaltning eller avfallshanteringsföretag för mer information om återvinningscentral där produk ten kanlämnas.
18. Ins tallera inte i ett trå ngt utrym me, t.ex. i en bokhylsa eller liknande enhet.
19.
t.ex. tända lju s, på apparaten.
20. Tänk på miljöaspekterna vid kassering av batterier. Batteri er måste kasseras på et t batteriuppsamlingsställe.
21. Denna apparat kan användas i tropiska och måttliga klimat upp till 45 ° C.
Page 7
prądem nie należy wykony wać
uziemieniem. Wtyczka dwubiegunowa posiada dwa w tyki kontakto we o różnej
urządzenia nie odpowiada standardowi
wktór ym kabel sieciowy pr zymocowany
12 13Quick Start GuideXENYX 302USB
sieciowe w urządzeniu pełnią funkcję
substanc ji niebezpiecznych z aliczanych
zapoznaj się ze w szystkimi szc zegółami
Music Tribe tar inget ansvar för någon förlust som kan drabbas av någon person som helt eller delvis förlitar sig på någon beskrivning, f otogra eller uttalande som nns här. Tekniska specikationer, utseenden och annan information kan ändras utan föregående meddelande. Alla varumärken tillhör respek tive ägare. Midas, Klark Teknik, Lab Gruppen, Lake, Tannoy, Turbosound, TC Electronic, TC Helicon, Behringer, Bugera, Oberheim, Auratone och Coolaudio är var umärken eller registrerade varumärken som tillhör Music Tribe Global Brands Ltd. © Music Tribe Global Brands Ltd. 2021 Alla Rättigheter reserverade.
För tillämpliga garantivillkor och ytterligare information om Music Tribes begräns ade garanti, se fullständig information online på musictribe.com/warranty.
Ważne informacje o bezpieczeństwie
Uwaga
Terminale oznaczone
symbolem przenoszą wystarczająco wysokie napięcie elektr yczne, aby stwor zyć ryzyko porażenia prądem. Uż ywaj wyłącznie wysokiej jakości fabryc znie przygotowanyc h kabli z zainstalowanymi wt yczkami ¼"TS. Wszystkie i nne instalacje lub modyk acje powinny być wykonyw ane wyłąc znie przez wykwalikowany personel techniczny.
Ten symbol informuje o
ważnych wskazówkach
dotycz ących obsługi i konserwacji urządzenia w dołączonej dokumentacji. Proszę przeczytać stosowne informacje w instrukcji obsługi.
Uwaga
W celu wyeliminowania
zagrożenia por ażenia prądem zabrania się zdejmowania obudowy lu b tylnej ścianki urz ądzenia. Elementyz najdujące się we wnętrzu urządzen ia nie mogą być naprawiane przez uż ytkownika. Napraw ymogą być wykony wane jedynie przez wykwalikowanypersonel.
Uwaga
W celu wyeliminowania
zagrożenia por ażenia prądem lub za palenia się urządzenia nie wolno wy stawiać go na działanie deszczu i wilgotności oraz dopuszczać do tego, aby do wnęt rza dostała się woda lub inna ciecz. Nie należy st awiać na urządze niu napełnionych cie czą przedmiotów takich jak np. wazony lub szklanki.
Uwaga
Prace serwisowe mogą
być wykony wane jedynie przez wykwalikowany personel. Wcelu uniknięcia zagrożenia porażenia
żadnych manipulacji, które nie są opisane w instrukcji obsługi. Naprawyw ykonywane mogą być jedynie przez wykwalikowany personeltechniczny.
1. Proszę przeczytać poniższewskazówki.
2. Proszę przechowywać niniejsząinstrukcję.
3. Należy pr zestrzegać wszystkich wskazówek os trzegawczych.
4. Należy p ostępować zgodnie z instrukcjąobsługi.
5. Urz ądzenia nie wolno uży wać w pobliżuwody.
6. Urządzenie można cz yścić wyłąc znie suchąszmatką.
7. Nie zasłaniać ot worów wentylac yjnych. Wczasie pod łączania urządzenia należy pr zestrzegać zaleceńproducenta.
8. Nie stawia ć urządzenia w pobliżu źródeł c iepła takich, jak gr zejniki, piecelub urz ądzenia produkujące ciepło (np.wz macniacze).
9. W żadnym wypa dku nie należy usuwać zabe zpieczeń z wtyc zek dwubiegun owych oraz wtyc zek z
szerokości. Wtyczkaz uziemieniem ma dwa wt yki kontaktowe i trzec i wtyk uziemienia. Szerszy wtyk kontak towy lub dodatkowy wtyk uziemienia służą do zapewnienia bezpieczeńst wa użyt kownikowi. Jeśli format w tyczki
gniazdka, proszę zwrócić się do elektryka z prośbą o wy mienienie gniazda.
10. Kabel sieciow y należy ułożyć tak, aby nie by ł narażony na deptanie i działanie o strych krawędzi, c o mogłoby doprowadzić do jego uszkodzenia. Szczególną uwagę zwró cić należy na odpowiednią ochronę miejsc w pobliżu wtyc zek i przedłużac zy oraz miejsce,
jest dour ządzenia.
11. Urządzenie mu si być zawsze podłąc zone do sieci sprawnym przewodem z uziemieniem.
12. Jeżeli wtyk sieciowy lub gniazdo
wyłąc znika, tomuszą one być zawsze łatwodos tępne.
13. Używ ać wyłącznie spr zętu dodatkowego i akce soriów zgodnie z zaleceniami producenta.
14. Uży wać jedynie zalecanych przez producenta lub znajdujących się w zestawi e
wóz ków, stojaków, stat ywów, uchwytów i stołów. Wprzypadku posługiwania się wózkiem należy zachować szczególną ostrożność w trakcie przewożenia zes tawu, abyuniknąć niebezpieczeńst wa potknięcia się i zranienia.
15. W trakcie burzy oraz na czas dłuż szego nieużywania urządzen ia należy wyjąć wt yczkę z gniazdkasieciowego.
16. Wykony wanie wszelkich napraw należy zlecać jedynie wykwali kowanym pracownikom serwisu. Przeprowadzenie przeglądu technicznego staje się konieczne, jeśli urządzenie zostało uszkodzone w jakikolwiek s posób (dotyczy to tak że kabla siecio wego lub wtyczki), jeś li do wnętrz a urządzenia dost ały się przedmioty lub ciecz, jeśli urządzenie wyst awione było na działanie d eszczu lub wilgoci, jeśli urządzenie nie funkcjonuje poprawnie oraz kiedy spadło napodłogę.
17. Prawidłowa
utylizacja produktu: Tensymbol wskaz uje, żetego produk tu nie należy wyr zucać razem
ze zwykłymi odpadami domowymi, tylko zgodnie z dyrektywą w sprawie zuż ytego sprzętu elektrycznego i elektr onicznego (WEEE) (2012/19/EU) oraz przepisami krajowymi. Niniejsz y produkt należy przekazać do autoryzowanego punktu zbiórki zużytego sprzętu elektr ycznego i elektronicznego. Niewłaściwe postępowa nie z tego typu odpadami może wywo łać szkodliwe dział anie na środowisko naturalnej i zdrowie człowie ka z powodu potencjalnych
jako zuży ty sprzęt elekt ryczny i elektroniczny. Jednocześnie, Twój wkład w prawidłową utylizację niniejszego p roduktu przyc zynia się do oszczędn ego wykorzyst ywania zasobów naturalnych. Szczegółowych informacj i o miejscach, w któr ych można oddawać zu żyty sprzęt d o recyklingu, udzielają urzędy miejskie, przedsiębiorstwa uty lizacji odpadów lub najbliższ y zakład utylizacji odpadów.
18. Nie instaluj w ogranic zonej przestrzeni, takiej jak półka na k siążki lub podobny zes taw.
19. Nie stawiaj na urząd zeniu źródeł otwartego ognia, takich jak zapalone świece.
20. Należy pamiętać o środowiskowych aspektach utylizacji baterii. Baterie należy utylizować w punkcie zbiórki baterii.
21. To urządzenie może być używane w klimacie tropikalnym i umiarkowanym do 45 ° C.
ZASTRZEŻENIA PRAWNE
Music Tribe nie ponosi odpowiedzialności za jakiekolwiek straty, które mogą ponie ść osoby, które polegają w całości lub w części na jakimkolwiek opisie, fotogr ai lub oświadczeniu zawart ym w niniejszym dokumencie. Specykacje techniczne, wygląd i inne informacje mogą ulec zmianie bez powiadomienia. Wszystkie znaki towarowe są własnością ich odpowiednich właścicieli. Midas, Klar k Teknik, Lab Gruppen, Lake, Tannoy, Turbosound, TC Elec tronic, TC Helicon, Behringer, Bugera, Oberheim, Auratone i Coolaudio są znakami towarowymi lub zas trzeżonymi znakami towarowymi rmy Music Tribe Global Brands Ltd. © Music Tribe Global Brands Ltd. 2021 Wszystkie prawa zastrzeżone.
OGRANICZONA GWARANCJA
Aby zapoznać si ę z obowiązującymi warunkami gwarancji i dodatkowymi informacjami dotyc zącymi ograniczonej gwarancji Music Tribe,
w trybie online pod adresem musictribe.com/warranty.
Page 8
DVD Player
XM8500
iPod
iPod
B3031A
B-5
14 15Quick Start GuideXENYX 302USB
XENYX 302USB Hook-up
(EN) Step 1: Hook-Up
(ES) Paso 1: Conexión
(FR) Etape 1 : Connexions
(DE) Schritt 1: Verkabelung
(PT) Passo 1: Conexões
(IT) Passo 1: Collegamenti
(NL) Stap 1: Hook-Up
(SE) Steg 1: Anslutning
(PL) Krok 1: Podłączeni
C-2
Karaoke us ando un repro ductor de DVD u or denador
Karaoke us ing DVD player or co mputer
Karaoké av ec lecteur de D VD ou ordinate ur
Karaoke mi t DVD Player oder Co mputer
Karaoke us ando DVD player o u computado r
Karaoke co n lettore DVD o com puter
Karaoke me t DVD-speler o f computer
Karaoke me d DVD-spelar e eller dator
Karaoke pr zy użyciu od twarzac za DVD lub komput era
B210D
Live recording
Grabaci ón en direct o
Enregistrement Live
Digital Recorder
Live-Aufnahme
Gravação a o vivo
Registrazione del vivo
Live opname
Liveinspelning
Nagry wanie na żyw o
Do not use t he MIC IN an d the HEADSE T MIC IN jackssimultaneously.
No utili ce a la vez las tomas MICI N y HEADSET MIC IN.
N’utilisez pas les entrées MIC IN et HE ADSET MICIN enmêmete mps.
Verwenden Sie die MIC IN- un dHEADSET MICIN-B uchsen nichtgleichzeitig.
Não use o ja ck de entrad a do microf one MICIN e o do fo ne de ouvido H EADSET MIC I N simultaneamente.
When connecting a headse t with built-in microphone, such as th e HS1000, always co nnect both cab les (Mic and Headphones) to avoid unwante dnoise.
Cuando conecte una diadema con micro in corporado, comoel HS100 0, conec tesiempre los dos cabl es (microy auricu lares) para evitar l a aparición deruidos.
Non util izzate simultaneamente i jack MIC IN e H EADSET MIC IN.
Gebru ik de MIC IN- en HEA DSET MIC IN-aansluitingen niet tegelijkertijd.
Använd in te MIC IN- och HEADSET MIC IN-uttagen samtidigt.
Nie używaj jednocześnie gniazd M IC IN i HEADSET MIC IN.
Lorsque vous connectez un casque avec micr o intégré, comme un HS100 0, connectez toujours les deux câbles (micro et c asque ) pour éviter tout bruit de fond.
Quando collegate un heads et, come HS1000, per ev itare rumori indesiderati collega te sempre entram bi i cavi (microfono e cua).
Bei einem Headset mit integriertem mikrof on, z. B. HS1000, soll tenSie immer beide Kabel (Mikrofonund Kopfhörer) anschließen, umunerwünschte Störgeräusche zuvermei den.
Quando conectar um fone de ouvido a um microfone embutido, tal como o HS100 0, conec te sempre ambos os c abos (Microfonee fones de ouvido) para evitar ruídosindesejados.
Sluit bij h et aanslui ten van een head set met ingebouwde microf oon, zoals de HS1000, alt ijd beide ka bels aan (microfo on en koptelefoon) om ongewen ste ruis te voorkomen.
När du anslu ter ett hea dset med inbyggd m ikrofon, til l exempe l HS1000, ska du alltid a nsluta båda kablar na (mikrofon och hörl urar) för att undvika oönskat ljud.
Podcz as podłącz ania zestaw u słuch awkowego z wbudow anym mikrofonem, takieg o jak HS1000, zawsze p odłącza j oba kabl e (mikrofon i słuch awki), aby unikn ąć niepożądanych szumów.
Pequeño estudio de grabación
Podcasting
Podcast
Podcast
Podcast
Podcasting
Podcasting
Podcasting
Podcasting
Podcasting
HS1000
Project studio
Studio de maquettes
Projektstudio
Estúdio Projeto
Project studio
Project studio
Projektstudio
Studio projek towe
HPS3000
HPS5000
V-Amp 3
Keyboard
Keyboard
Page 9
16 17Quick Start GuideXENYX 302USB
XENYX 302USB Controls
(EN) Step 2: Controls
(ES) Paso 2: Controles
(FR) Etape 2 : Réglages
(DE) Schritt 2:
Bedienelemente
(PT) Passo 2: Controles
(IT) Passaggio 3:
Controlli
(NL) Stap 2: Bediening
(SE) Steg 2: Kontroller
(PL) Krok 2: Sterowanica
LINE/U SB FROM button determines whethe r the LINE IN or USB PLAY appea rs in the LINE /USBchannel.
El botón LIN E/USB FROM dete rmina si en el canal L INE/USB aparec e la señal LINE IN o USB PLAY.
La touch e LINE/USB FROM déte rmine si les signa ux LINE IN ou USB PLAY doiv ent faire partie du canal LINE/USB.
GAIN knob adj usts the sens itivity of t he MICIN and HE ADSET MICINinpu ts.
El mando GAIN aj usta la sensibilidad de las entrad as MICIN y HEADSET M ICIN.
Le bouton d e GAIN détermine la sensibilité des entr ées MICIN et du micro d u casque HEADSET M ICIN.
LINE/U SB FROM-Tas te besti mmt, obdas LINE IN- oderUSB P LAY­Signal au f dem LINE/ USB-Kanalanliegt.
O botão LINE /USB FROM dete rmina se o LINE IN ou USB PL AY aparece no canal LINE/ USB.
LINE/U SB FROM
- tasto pe r avere il segnal e LINE IN o USB PLAY nel canale LINE/ USB.
GAIN-Drehregler steuert die Empndlichkeit der MICIN- und H EADSET MICIN-Eingänge.
O botão GAIN aj usta a sensibilidade das entrad as MIC IN e do HEADSET MIC IN.
GAIN – manopo la per stabilire la sensibilità degli in gressi MIC IN ed HEADSET MIC IN.
LINE/U SB FROM­knop bep aalt of LINE IN of USB PLAY vers chijnt in het LINE / US B kanaal.
LINE/U SB FROM-
-knapp en avgör om LINE IN elle r USB PLAY visas i LI NE / USB­kanalen.
LINE/U SB FROM­określ a, czy na kanal e LINE / USB poja wi się LINE IN lub USB PL AY.
GAIN regelaar regelt de gevoeligheid van de MIC IN- en H EADSET MIC IN-ingangen.
GAIN ratte n justerar känsligheten för ingångarna MIC IN och HEADSET MIC IN.
GAIN Pokręt ło reguluje czuł ość wejść MIC IN i HEADSET MIC IN.
LINE/USB TO butto n determines whether the LINE /USB channel routes t o the PHONES orMAIN MIXo utput.
El botón LIN E/USB TO determi na si el canal LINE/USB envía su señal a la s alida PHONES o M AIN MIX.
La touch e LINE/ USB TO détermine si le canal L INE/USB doit êtr e routé vers la sort ie PHONES ouMAIN MIX .
LINE/USB TO-Tas te bestimmt, ob der LINE/USB-Kanal zum PHONES - oderMAIN MIX-Ausgang geleitetwird.
O botão LINE / USBTO deter mina se o canal LIN E/USB é roteado a té o PHONES ou saída d e fones ‘MAINMIX’.
LINE/USB TO - tasto per invia re il canale LINE/US B all'uscita PHONES o M AIN MIX.
LINE/USB TO bepaal t of het LINE / USB-kanaal naar de PHONES - of MAIN MIX-uitgang leidt.
LINE/USB TO
-knapp en avgör om LINE / USB-kanalen går till PHO NES- eller MAIN MIX-utgången.
LINE/USB TO Przyc isk określa, czy ka nał LINE / USB jest ki erowany do wyjśc ia PHONES cz y MAIN MIX.
2-TRACK TO but ton determines whether the 2-TRACK in puts route to th e PHONES or MAIN MIX o utput.
El botón 2-TRACK T O le permi te elegir si las entra das 2-TRACK envían su s eñal a la salida P HONES o MAIN MIX.
La touch e 2-TRACK TO détermi ne si les entrée s 2-TRACK doivent ê tre routée s aux sor ties PHONES ou MAIN MIX .
2-TRACK TO-Ta ste bestimmt, ob die 2-TRACK-Eingänge zum PHONES- oder MAIN MIX-Ausgang geleite twerden.
O botão 2-TRACK TO determi na se as entrad as 2-TRACK roteam até as saídas PHONES ou M AINMIX.
2-TRACK TO-ta sto per invia re gli ingress i 2-TRACK all'us cita PHONES o M AIN MIX.
2-TRACK TO-k nop bepaal t of de 2-TRACK-ingangen naar de PHO NES- of MAIN MIX-uitgang gaan.
2-TRACK TO-knappen avgör om 2-TRAC K matar in r utten till PHONES - eller MAIN MIX-utgången.
2-TRACK TO przyc isk określa, czy wej ścia 2-TRACK mają kier ować do wyjśc ia PHONES cz y MAIN MIX.
PAN/BAL slider positions the channel in the ste reoeld.
El mando de slizante PAN/BAL ajusta la posici ón del canal de ntro del campos tereo.
Le curs eur PAN/BAL place la voi e dans le champ stéréo.
PAN/BAL­Schieberegler positi oniert den K anal im Stereofeld.
PAN/BAL posici ona o canal no c ampo estére o na barra decontr ole.
PAN/BAL – curso re per posizionare il segnale del canale nel fronte stereo.
PAN/BAL schuifregelaar positi oneert het k anaal in het stereoveld.
PAN/BAL skjutreglaget placerar kanalen i stereofältet.
PAN/BAL suwak ustawi a kanał w polu stereo.
PHONES knob adjust s the headphonevolume.
El piloto PHONES le permi te ajustar el volume n de losauriculares.
Le bouton PHONES règle le vo lume dans lecasqu e.
PHONES-Drehregler steuer t den Kopfhörerpegel.
O botão PHONES ajusta o v olume do fone de ouvido.
PHONES - manopola per rego lare il volume della cua.
PHONES knop past het hoofdtelefoonvolume aan.
PHONES ratten justerar hörlursvolymen.
PHONES pokrętło reguluje głośność słuchawek.
POWER LED indica tes that power is connec ted to themixer.
El piloto P OWER le indic a que la mesa de m ezclas estáen cendida.
La LED POWER indique l a mise soustension.
POWER LED zeigt an, dass de r Mischer ans Strom netz angeschlossen ist.
POWER LED indic a que a energ ia está ligada no mixer.
POWER LED
- indica c he il mixer è col legato all'alimentazione.
POWER LED geeft aan dat de st room is aanges loten op de mi xer.
POWER LED indikerar att st röm är ansluten till mixern.
POWER LED wskazu je, że zasilanie jest podłączone do miksera.
Page 10
18 19Quick Start GuideXENYX 302USB
XENYX 302USB Controls
(EN) Step 2: Controls
(ES) Paso 2: Controles
(FR) Etape 2 : Réglages
(DE) Schritt 2:
Bedienelemente
(PT) Passo 2: Controles
(IT) Passaggio 3:
Controlli
(NL) Stap 2: Bediening
(SE) Steg 2: Kontroller
(PL) Krok 2: Sterowanica
MIC knob adju sts the MIC IN and HE ADSET MICINvolum e.
El mando MIC aju sta el volume n de las entrad as MIC IN y HEADSET M ICIN.
Le bouton M IC déterm ine le niveau des entr ées MIC IN et HEADSET M ICIN.
MIC-Drehregler steuert die Laut stärke des MIC IN- und H EADSET MICIN-Eingangs.
O botão MIC aju sta o volume do M IC IN e do HEADSET MIC IN.
MIC - manopol a per regola re il volume MIC IN e HEADSE T MIC IN.
MIC regelaa r past het MIC IN en HEA DSET MIC IN volume aan.
MIC ratten justerar MIC IN och HEA DSET MIC IN volymen.
MIC Pokrętł o reguluje głośno ść MIC IN i HEADSET MIC IN.
EQ sliders adjust the high an d low frequencies of thechannel.
Los mando s deslizantes EQ ajustan l as frecu encias aguda s y graves del canal.
Les curseurs EQ règlent les fréqu ences High et Low de la voie.
EQ-Schieberegler steuern die Höhen und Bässe des Kanals.
EQ a barra de contro le ajusta as frequências altas e baixas do canal.
EQ - cursor i per regolare le frequenze alte e bass e del canale.
EQ schuifregelaars passen d e hoge en lage fre quenties va n het kanaal aan.
EQ reglagen justerar kanalens höga och låga frekvenser.
EQ suwaki dostosowują wysokie i niskie c zęstotliw ości kanału.
SIG/CLIP LEDs light green wh en a signal appears in the main bus and lig ht red when the signal begins tooverload.
Los pilotos SIG/CLIP se iluminan en verde siempre que hay una señal en el bus pr incipal y en rojo cu ando la señal com ienza a estarsobrecargada.
Les Leds SIG/CLIP s’allument en vert en présen ce d’un signal sur le bus pr incipal et en roug e lorsque le signal commence àsature r.
SIG/CLIP LEDs leuchten grün, wenn ein Signa l auf dem Hauptbus anliegt, und rot, we nn das Signal zu übersteuern beginnt.
Os LEDs SIG/CLIP acendem u ma luz verde qua ndo o sinal aparece no barramento principal e acendem u ma luz vermelha quando o sinal com eça asobrecarregar.
SIG/CLIP - questi le d si illumin ano in verde quando è pr esente un segnale nel circuito princi pale e in rosso quando il segnale inizia a s aturare.
SIG/CLIP LED's lichten g roen op als er een sign aal in de hoofdbus verschijnt en lichte n rood op als het signa al begint te overbelasten.
SIG/CLIP Lysdioderna lyser gr önt när en signal v isas i huvudbussen och lyser rött när signalen börjar överbelastas.
SIG/CLIP Diody LED świecą na zielono, gdy pojawia się sygnał na magistrali głównej i świec ą na czerwo no, gdy sygnał zaczyna się przeciążać.
CLIP LED light s when the M IC IN or HEADSE T MIC IN sourceov erloads.
El piloto CLIP s e ilumina cuando la fuent e MIC IN o HEADSET M IC IN estásobrecargada.
La Led CLIP s ’allum e lorsqu e l’entrée MIC IN ou HEADSE T MIC IN est en surcharge.
CLIP LED leuchtet, wenn das MIC I N- oder HEADSET M IC IN­Signalübersteuert.
O LED CLIP ca iluminado quando há sobrec arga das font es do MIC IN ou HE ADSET MIC IN.
CLIP - questo l ed si accende q uando la sorgen te MIC IN o HEADSET M IC IN è in sovraccarico.
CLIP LED licht o p wannee r de MIC IN- of HEADSET M IC IN-bron overbelast raakt.
CLIP LED tänds när MIC IN eller HE ADSET MIC IN-källan överbelasta s.
CLIP Dioda LED ś wieci się, gdy źr ódło MIC IN lub HEADS ET MIC IN jest przeciążone.
LINE/USB knob adjust s the volume of the LINE in puts or the signal returning from a compute r via USB.
El mando LINE /USB le permite ajustar el volumen de las entrad as LINE o de la señal recibida desde un ordena dor vía USB.
Le bouton L INE/USB règle le vo lume des entrée s LINE ou le signal de retour d’un ordinateur par USB.
LINE/USB-D rehregler steuert den Pegel der Line-Eingänge oder des vom Com puter via USB rückgefü hrten Signals.
O botão LINE /USB ajusta o v olume das entrad as LINE ou o sinal retornando de um computador através d o USB.
LINE/USB - manopola per rego lare il volume degli in gressi LINE o il segna le di ritorno da un compu ter tramite USB.
LINE/USB regela ar regelt het volume van de LINE-ingangen of het signaal dat terugkeert van een compute r via USB.
LINE/USB rat ten juster ar volymen på LINE-ingångarna eller signalen som återvänder från en dator via US B.
LINE/USB Pokrętło reguluje głośność wejść LINE lub sygnał powracający z kompute ra przez USB.
MAIN MIX knobadj usts the level o f the MAINMIXou tputs.
El mando MA IN MIX le permi te ajustar el nivel de las salidas MAINMIX.
Le bouton M AIN MIX règle le n iveau des sort ies MAINMIX.
MAIN MIX­Drehregler steuert den Pegel d er MAINMIX-Ausgänge.
O botão MA IN MIX ajusta o n ível das saídas MAIN MIX.
MAIN MIX - man opola per rego lare il livello delle usc ite MAIN MIX.
MAIN MIX regelaar past he t niveau van de MAIN MIX­uitgangen aan.
MAIN MIX rat ten juster ar nivån på MAIN MIX­utgångarna.
MAIN MIX Pokrętło reguluje poziom wyjść M AIN MIX.
Page 11
20 21Quick Start GuideXENYX 302USB
XENYX 302USB Getting started
(EN) Step 3: Getting
started
(ES) Paso 3: Puesta en
marcha
(FR) Etape 3 : Mise en
oeuvre
(DE) Schritt 3: Erste
Schritte
(PT) Passo 3: Primeiros
Passos
(IT) Passo 3: Iniziare
(NL) Stap 3: Aan de slag
(SE) Steg 3: Komma
igång
(PL) Krok 3: Pierwsze
kroki
(EN) Make sure the power to all device s is turned o. Connec t all appropriate au dio,
power and USB ca bles to the mixer. Themixe r can be powered wit h the include d USB power adaptor, or by a computer v ia bus power. *Note* Some tablet co mputers may not prov ide sucien t buspower.
(ES) Asegúres e de que todos los aparatos d el sistema estén ap agados. Realicetodas las conexiones adecuadas (audio, aliment acióny USB) al mezclado r. Esteme zclador puede recibir corriente desde el adaptador de corrie nte USB incluido o desd e un ordenado r vía alimentació n por bus. *Nota*Alguno sordenadores po rtátiles y “table tas” es posible qu e no puedan ofrecer el suciente voltaje para hacer funcionar esta unidad por alimentación por bus.
(FR) PLacez tous les é quipements hor s tension. Re liez tous les câble s audio, d’alimentat ion et les câbles USB à l a console de m ixage. La console d e mixage peut êtr e alimentée par l’adapt ateur USB fourni, o u par le bus USB d’un ordinate ur. *Remarque*Certains portables compacts risquent de ne pas fournir une alimentation susamment puissante.
(DE) Achten Sie darauf, da ss alle Geräte ausge schalte t sind. Schließen Si e alle notwendigen Audio-, Netz- und USB-Kabel an den Misc her an. Der Mischer k ann über den mitgelieferten USB-Netzadapter oder über einen Computer-Bus mit Spannung versorgt werden. *Hinweis* Manche Tablet Computer liefern eventuell nicht genügendBus-Spannung.
(PT) Cer tique-se de t er desligado todos os dispositivos. Conecte todos os cabos apropriados de áudio, alimenta çãoe USV ao mixer. O mixer pode ser li gado com o adaptador USB que vem inclu ído, ou por um comput ador através da al imentação de bar ramento. *Obser vação*Algunscomp utadores tablet p odem não fornecer a limentação de barramento suciente.
(IT) Assicuratevi che tutti i dispositivi siano spent i. Collegate al mixer t utti i cavi idonei per alimentazione, audio e USB. Il mixer può e ssere alimentat o con l’adattat ore di alimentazio ne USB incluso o tramite un c omputer o un tablet . * Nota * Alcuni ta blet potrebber o non fornire un’alimentazione suciente al mixer.
(NL) Zorg ervoor da t de stroom van alle apparaten is uitgeschakeld. Sluit alle geschik te audio-, stroo m- en USB-kabels aan op de mixer. De m ixer kan worden gevoed me t de meegeleverde USB ­voedingsadapter, of door een computer via busvo eding. * Opmerki ng * Sommige tabletcomputers bieden mogelijk niet
voldoende busvoeding.
(SE) Se till att st römmen till alla enhe ter är avstängd. Anslut alla lämpliga ljud-, ström- o ch USB-kablar till m ixern. Mixern ka n drivas med den med följande USB-näta daptern eller via en da tor via bussst röm. * Obs * Vissa sur fplattor ge r
inte tillräckligt med bussström.
(PL) Upewnij się, że zas ilanie wszyst kich urządz eń jest wyłąc zone. Podłącz wszystkie odpowiednie kable audio, zasilając e i USB do miksera. Mik ser może być zasilany za pomocą dołączonego zasilac za USB lub z komputera p rzez magistralę. * Uwaga * Niektóre tablety mogą nie zapewniać wystarc zającej mocy magistrali.
(EN) Set the EQ and PAN/BAL faders t o the center “0” positio n, and turn all other knobs fu llcounterclock wise.
(ES) Ajuste los fade rs EQ y PAN/BAL a la posició n “0” central y coloqu e el resto de mandos en su to pe izquierdo (mínim o).
(FR) Réglez les Fader s EQ et PAN/BAL au centre sur “ 0”, et p lacez tous les autre s boutons au minimum.
(DE) Stellen Sie die EQ- u nd PAN/BAL­Schiebe regler auf die mit tlere “0” Positio n ein und dreh en Sie alle anderen Re gler ganz nach links.
(PT) Ajus te os faders EQ e PAN/BAL p ara a posição c entral “0”, e gire todos os bot ões completamente na direção anti-horária.
(IT) Imp ostate i fader EQ e PAN/BAL n ella posizio ne centrale “0” e ruo tate tutte le altre man opole completam ente in
senso antiorario.
(NL) Zet de EQ- en PAN / BAL-faders in d e middels te “0” -positie en d raai alle andere knoppen v olledig tegen de k lok in.
(SE) Ställ EQ- och PAN / BAL-fadrar na i mittlä get “0” och vrid all a andra rattar moturs.
(PL) Ustaw suwaki EQ i PAN / BAL na środkową p ozycję „0”, a pozostał e pokrętła przekr ęć całkowicie w le wo.
(EN) Power on any exter nal equipme nt such as speakers or power ampliers.
(ES) Encienda el res to de dispositivo s exter nos como los recint os acústicos y etapas de potencia.
(FR) Alimentez les en ceintes ou les amplic ateurs de puissa nce.
(DE) Schalten Sie alle e xternen Gerä te, z. B. Lautsprecher oder Endstufen, ein.
(PT) Ligue todos equipamentos externos, tais como al to-falantes ou am plicadores de potência.
(IT) Accendete qualsiasi apparecchiatura esterna come altoparlanti o amplicatori
di potenza.
(NL) Schakel externe apparatuur in, zoals luidsprekers of eindversterkers.
(SE) Slå på extern u trustning så som högtalare eller eektf örstärkare.
(PL) Włącz wszelk ie urządzenia zewnętr zne, takie jak gło śniki lub wzmacniacze mocy.
(EN) While talking t hrough the mic connec ted to the MICIN jack, tur n the GAIN knob
clock wise until the CLIP LED lights momentarily during the loudest peaks in your speaking.
(ES) Mientras habl a o canta en el micro que tenga con ectado a la toma MICI N, gire
a la derech a el mando GAIN hasta qu e el piloto CLIP se ilumine momentáneamente durante lo s picos más potentes de s u interpretación.
(FR) Tout en parlant dans le mi cro connecté à l’entrée MICIN, m ontez le GAIN jusqu’ à ce que la Led CLI P s’allume rap idement sur les pass ages les plus for ts.
(DE) Sprechen Sie in s Mikrofon, das an die MICIN-B uchse angeschl ossen ist,
unddrehen S ie den GAIN-Regle r nach rechts , bis die CLIP LED kurz zeitig bei den laut esten gesproch enen Stellenaueuchtet.
(PT) Enquanto fala através do microfone conec tado ao jack MIC IN, gire o b otão de ganho ‘GAIN’ n adireção horári a até as luzes do LED do C LIP momentaneame nte durante os p icos de volume alto enquanto fala.
(IT) Mentre parlate al microfono collegato alla pres a MIC IN, ruotare la mano pola GAIN in sens o orario nché il LED CL IP non si accende mo mentaneamente du rante i picchi più f orti della voce.
(NL) Terwijl u door de mic rofoon praat di e op de MIC IN-aa nsluiting is aange sloten, draait u de G AIN-knop met de kl ok mee totdat de CLIP- LED even oplicht tij dens de luidste pieken in uw spreken.
(SE) När du pratar gen om mikrofonen so m är ansluten t ill MIC IN-utta get vrider du GAIN-ratten medsols tills CLIP-lampan tänds till fälligt under de h ögsta topparn a i ditt ta l.
(PL) Podczas rozm owy przez mikr ofon podłąc zony do gniazda MIC IN, o bracaj pokręt łem GAIN zgodnie z ruc hem wskazówe k zegara, aż dioda CLIP z aświeci się na chwilę p odczas najgł ośniejszych
szczy tów mowy.
(EN) Select the s ource for the LINE/USB ch annel with the LINE/USB FRO M button, andselec t its destina tion with
the LINE/ USB TObutton.
(ES) Elija la fuente pa ra el canal LINE/USB con el botón L INE/USB FROM y elija después e l destino de la señal c on el botón LINE/USBTO.
(FR) Sélection nez la source de la voie LINE/USB ave c la touche LINE/USB FRO M, etsélec tionnez sa des tination avec la touche LINE /USB TO.
(DE) Wählen Sie die Signalquelle für den LINE/USB -Kanal mit der LINE /USB FROM­Taste und wähle n Sie das Ziel mit der LINE/USB TO -Taste.
(PT) Sel ecione a fonte do ca nal LINE/USB com o botão LI NE/USB FROM, e selec ione o seu dest ino com o botão LINE/ USB TO.
(IT) Sel ezionate la sorgen te per il canale LINE/USB co n il pulsante LINE/US B FROM e selezionare la destinazione con il pulsante
LINE/USB TO.
(NL) Selectee r de bron voor het LINE / USB-kanaa l met de LINE / USB FROM-kn op en selec teer de bestemmi ng met de LINE /
USB TO-kno p.
(SE) Välj källan för LIN E / USB-kanalen med LINE / USB FROM-k nappen och välj de ss
destin ation med LINE / USB TO-k nappen.
(PL) Wybierz źró dło dla kanału LIN E / USB za pomoc ą przycisku LIN E / USB FROM i wybie rz miejsce docelowe z a pomocą przyc isku LINE / USB TO.
Page 12
22 23Quick Start GuideXENYX 302USB
XENYX 302USB Getting started
(EN) Step 3: Getting
started
(ES) Paso 3: Puesta en
marcha
(FR) Etape 3 : Mise en
oeuvre
(DE) Schritt 3: Erste
Schritte
(PT) Passo 3: Primeiros
Passos
(IT) Passo 3: Iniziare
(NL) Stap 3: Aan de slag
(SE) Steg 3: Komma
igång
(PL) Krok 3: Pierwsze
kroki
(EN) Turn the MAIN MIX knob to the center 0 p osition. If the SIG/CLIP LEDs l ight up red at any time, tur n the MAIN MIX
knob backd own.
(ES) Gire el mando MAIN M IX hasta colocar lo en la posición “0” ce ntral. Silos piloto s SIG/CLIP se iluminan en rojo conti nuamente, reduzca u n poco la
posició n del mando MAIN MIX.
(FR) Tournez le bouton M AIN MIX en positio n centrale 0. Si les Leds SI G/CLIP s’allument en ro uge, baissez le bou ton MAIN MIX.
(DE) Drehen Sie den MAI N MIX-Regler auf die zent rale 0-Positio n. Wenn die SIG/CLIP LEDs z u irgendeinem Zeit punkt rot aueuc hten, drehen Sie den M AIN MIX-Regler zurück.
(PT) Gir e o botão MAIN MIX até a posi ção central 0. S e os LEDs SIG/CLIP carem iluminados a qualquer momento, abaixenova mente o botão MAIN MIX .
(IT) Ruot ate la manopola MAIN MI X nella posizio ne centrale “0”. Se in qualsias i momento i le d SIG/CLIP si illuminano i n rosso, abb assate nuovament e la manopola
MAIN MIX.
(NL) Draai de MAIN MIX-k nop naar de middels te 0-positie. Als d e SIG / CLIP-LED’s op enig mome nt rood oplichten, d raait u
de MAIN MIX-kn op weer omlaag.
(SE) Vrid MAIN MIX-rat ten till mittläg et 0. Om SIG / CLIP-ly sdioderna lys er rött när
som helst , vrid ner MAIN MIX-rat ten.
(PL) Przekręć po krętło MAIN MIX do środkowej p ozycji 0. Jeśli diod y SIG / CLIP zaświe cą się na czerwo no w dowolnym momenci e, obróć pokrętł o MAIN MIX z powrotem w d ół.
(EN) Adjust the headphone volume wit h the PHONES kn ob.
(ES) Ajuste el volume n de los auriculare s con el mando PHONES.
(FR) Réglez le niveau da ns le casque avec le bouton PHONES.
(DE) Stellen Sie d ie Kopfhörerlautstärke mit dem PHONES-Drehregler ein.
(PT) Ajus te o volume do fone de ou vido com os botõe s PHONES.
(IT) Reg olate il volume della cu a tramite la manopola P HONES.
(NL) Regolate il volum e della cua tramit e la manopola P HONES.
(SE) Justera hörlursvolymen med PHONES-ratten.
(PL) Justera hörlursvolymen med PHONES-ratten.
(EN) Adjust the MIC and LINE/USB vo lume levels to achieve a balanced mix.
(ES) Ajuste los n iveles de volumen MIC y LINE/USB ha sta conseguir un a mezcla adecuada entre ambas señales.
(FR) Réglez le s niveaux MIC et LINE/ USB pour équilibrer votre mixage.
(DE) Stelle n Sie die MIC- und LINE/ USB-Pegel e in, um eine ausgewog ene
Mischung zuerzielen.
(PT) Ajus te os níveis de volume d o MIC e LINE/USB pa ra obter um mix balanc eado.
(IT) Reg olate i livelli dei volum i MIC e LINE/USB pe r ottenere un mix bi lanciato.
(NL) Pas de v olumeniveaus van MIC e n LINE / USB aan om een g ebalanceerde mi x
te verkrijgen.
(SE) Jus tera MIC- och LINE / USB ­volymniv åerna för att up pnå en
balanserad mix.
(PL) Dos tosuj poziomy gło śności MIC i LINE / USB, aby uzys kać zrównoważony mi ks.
(EN) Adjust the lef t-right positio n of each channel in the stere o eld if necess ary by turnin g the PAN and
BAL faders.
(ES) Si es n ecesario, ajus te la posición izquierda-derecha dentro del campo stereo de cada can al por medio de los f aders PANy BAL.
(FR) Réglez la position gauche-droite de chaque voie dans le mixage avec les Faders PAN et BAL.
(DE) Stellen Sie nötigenfalls die Links/Rechts-Position jedes Kanals im Stereofeld ein, indem Sie die PAN- und BAL-Sc hieberegler verschieben.
(PT) Ajuste a posição esquerda- direita ‘left- right’ de cad a canal no campo es téreo, senecess ário, girando os f aders PAN e BAL.
(IT) Se ne cessario, rego lare la posizione sinistr a-destra di o gni canale nel fron te stereo r uotando i fader PAN e BAL.
(NL) Pas indien nodig de links-rechts positie v an elk kanaal in het ste reoveld aan door aan de PAN- en B AL-f aders te draaien.
(SE) Justera vänster-höger position för varje kana l i stereofälte t om det behövs genom at t vrida PAN- och BAL-fadrarna .
(PL) W razie potrzeby wyreguluj lewą­prawą poz ycję każdego kana łu w polu stereo, ob racając tłumik i PA N i BAL.
(EN) Follow the se steps to create re cordings on your computer:
• Con nect a micropho ne to the MIC IN
and/or a stere o source to the 2-TRACK inputs. Connect headphones to the PHONES jack
• Pr ess the LINE/USB FROM bu tton to
selec t USB PLAY
• Pr ess the LINE/USB TO but ton to
selec tPHONES
• Se t the 2-TRACK TO button in th e UP
positio n (MAINMIX)
• Con nect the mixer to a f ree USB port
with the in cluded USB cable. It wi ll take a few se conds for the compu ter to recognize your device
• If u sing a Windows compu ter,
downloadt he Behringer USB Audi o Driver f rom the Support s ection of behring er.com to achieve low latenc y. Alternat ively, youmay use the fre e ASIO4ALL d river. This will allow you to monitor yo ur recordings wi thout hearing a delay between the incoming and outgoingsignals
• Se lect ‘USB Audio CODEC’ a s the sound
card for b oth Input and Outp ut in your system audio settings
*Note* Make sure t hat no “softwar e thru” function is activated while recording.
(ES) Siga esto s pasos para crear grabaciones en su ordenador:
• Con ecte un micrófo no a la toma MIC IN
y/o una fuente ste reo a las entradas 2-TRACK. Conec te unos auricula res a la salida PHONES
• Pul se el botón LINE/USB FRO M y elija la
posició n USB PLAY
• Pul se el botón LINE/USB TO y el ija la
posición PHONES
• Aju ste el botón 2-TRACK TO a la
posició n de “no pulsado” (MAINMIX)
• Con ecte este mezc lador a un puerto
USB libre con el c able USB incluido. Elordenad or tardará unos se gundos en reconoc er el nuevo dispositi vo
• Si es tá usando un orde nador con
sistema op erativo Windows, descár guese el driver o con trolador audio Behr inger USB que encontr ará en la secció n Support de nue stra página web e n behringer.com para consegu ir así la mínima latenci a posible. Alternativamente, también puede usar el driver gratuito ASIO4ALL. Esto le pe rmitirá monito rizar sus grabaci ones sin que haya ret ardo entre las señale s de entrada y salida
• Eli ja ‘USB Audio CODEC’ como la ta rjeta
de sonido p ara tanto la entrada c omo la salida en la c onguración aud io de su sistema
*Nota* Ase gúrese de no tener ac tiva ninguna función “software thru” durantelagr abación.
(FR) Suivez ces é tapes pour enre gistrer sur votre ordi nateur :
• Con nectez un micro à l ’e ntrée MIC IN
et/ou une so urce stéréo aux ent rées 2-TRACK. Conne ctez le casque à la sorti ePHONES
• Ap puyez sur la touche LIN E/USB FROM
etsélec tionnez USB PLAY
• Ap puyez sur la touche LIN E/USB TO
etsélectionnez PHONES
• Plac ez la touche 2-TRACK TO en posi tion
HAUTE (MAINMIX)
• Con nectez la consol e à un port
USB libreavec le c âble USB fourni. L’ordinateur met quelques secondes à détec ter laconsole
• Si vo us utilisez un ordi nateur Windows,
téléchargez le pilote audio Behringer USB Audio dans la s ection Suppor t du site behr inger.com pour obtenir u ne latence fai ble. Sinon, utilise z le pilote gratuit A SIO4ALL. Ceci vou s permet d’écouter vos e nregistremen ts sans délai dans l ’éc oute des signaux ent rant et sort ant
• Sé lectionnez ‘USB A udio CODEC’
comme car te son de l’entrée et de la sort ie des paramètre s de votre système audio
*Remarque* D ésactivez to utes les fonctions “Soft ware Thru” qui peuvent être actives pendant l’enregistrement.
(DE) Um mit dem Com puter aufzuneh men, gehen Sie wi e folgt vor:
• Schließen Sie ein Mikrofon an den
MICIN-Eingang und/oder eine Stereoquelle an die 2-TR ACK-Eingänge an. Schlie ßen Sie Kopfhöre r an die PHONES-Buchse an
• Dr ücken Sie die LINE/USB F ROM-Taste,
um USB PLAY zu wählen
• Dr ücken Sie die LINE/USB TO -Ta ste,
umPHONES zu w ählen
Page 13
24 25Quick Start GuideXENYX 302USB
XENYX 302USB Getting started
(EN) Step 3: Getting
started
(ES) Paso 3: Puesta en
marcha
(FR) Etape 3 : Mise en
oeuvre
(DE) Schritt 3: Erste
Schritte
(PT) Passo 3: Primeiros
Passos
(IT) Passo 3: Iniziare
(NL) Stap 3: Aan de slag
(SE) Steg 3: Komma
igång
(PL) Krok 3: Pierwsze
kroki
Lös en Sie die 2-TRACK TO-Taste
(MAINMIX)
• Schließen Sie den Mischer mit dem
mitgelief erten USB-Kabel an einen freien USB -Port an. Der Comp uter benötigt einige Sekunden, um Ihr Gerät zu erkennen
• Wenn Sie einen Windows-Computer
benutzen, laden Sie in der Rubrik “Suppor t” von behrin ger.com den Behringer USB Audio Driver herunter, um eine möglichst geringe Latenz zu erzielen. Alternativ ist auch der kostenlose ASIO4ALL-Treiber verwend bar. Dadurch können Sie Ihre Aufna hmen abhören, ohned ass zwischen den eingehenden und ausgehenden Signalen eine wahrnehmbare Verzögerung entsteht
• Wählen Sie in den Audioeinstellungen
Ihres Syst ems die Option ‘USB Audi o CODEC’ als Soun dkarte für den E ingang und Ausgang
*Hinweis* Ach ten Sie darauf, dass während de r Aufnahme keine “So ftware Thru”-Funktion aktiviert ist.
(PT) Siga e sses passos par a criar gravaçõe s no seu compu tador:
• Con ecte um microfo ne ao MIC IN
e/ou uma fonte e stéreo às entrad as 2-TRACK. Conecte os fones de ouvido ao jackPHONE S
• Pr essione o botão LINE /USB FROM para
selecio nar USB PLAY
• Pr essione o botão LINE /USB TO para
selecionar PHONES
• Aju ste o botão 2-TRACK na posiç ão
UP(MAIN MIX)
• Con ecte o mixer a uma por ta USB com
o cabo USB que ve m incluído. Irá levar alguns se gundos para o compu tador reconhecer o dispositivo
• Se e stiver usando um c omputador
Windows, b aixe o driver de áudio Behring er USB Audio Driver da se ção Suppor t do site behringer.com p ara consegu ir baixa latência. O dr iver gratuito ASIO4ALL pode ser usado alternat ivamente. Isto lhe po ssibilitará monitor ar suas gravações se m ouvir o atraso en tre os sinais de entr ada e saída
• Se lecione o ‘USB Audio CODE C’ como
o cart ão de som tanto para a Ent rada quanto par a a Saída no seu sistema d e conguração de áudio
*Obser vação* Certi que-se de que nenhuma função “software thru” estejaat ivada enquanto est iver gravando.
(IT) Per e ettuare regi strazioni sul vo stro computer, eseguite questi passaggi:
• Col legate un microfo no a MIC IN e/o
una sorge nte stereo agli ingr essi 2-TRACK. Colleg ate la cua alla pres a PHONES
• Pr emete il tasto LINE /USB FROM per
selezio nare USB PLAY.
• Pr emete il tasto LINE /USB TO per
selezionare PHONES.
• Imp ostate il pulsan te 2-TRACK TO nella
posizio ne UP (MAIN MIX)
• Tramit e il cavo USB incluso, colle gate
il mixer a una p orta USB libera. Il computer impiegherà alcuni secondi per ricon oscere questo dis positivo.
• Se u sate un computer con W indows,
per ottenere una bassa latenza scaric ate il driver audio USB Behring er dalla sezione Sup port di www.behringer.com. In alternativa, potete us are il driver ASIO4 ALL gratuit o. Ciò vi consentirà d i monitor are le vostre regis trazioni senza as coltare ritard o tra i segnali in entrata e i n uscita
• Nelle impostazioni audio del sistema
selezio nate ‘USB Audio CODEC’ come scheda au dio sia per l’ingre sso che per l’uscita.
*Nota* Assicuratevi che nessuna funzione “soft ware thru” sia att ivata durante la registrazione.
(NL) 10. Volg deze stap pen om opnames op uw compute r te maken:
• Dr uk op de LINE / USB FROM-kno p om
USB PLAY te selec teren
• Dr uk op de LINE / USB TO-kno p om
PHONES te selecteren
• Zet d e 2-T RACK TO-knop in de
UP-positie (MAIN MIX)
• Slu it de mixer aan op een vr ije usb-
poort m et de meegelever de usb-kabel. Het duur t enkele seconden vo ordat de computer uw apparaat herkent
• Als u een Windows-computer gebruikt,
download d an het Behringer USB ­audiostuurprogramma uit de sectie Ondersteuning van behringer.com om een lage la tentie te bereiken. Als alternat ief kunt u de gratis A SIO4ALL­driver gebruiken. Hierdoor kunt u uw opnamen a uisteren zonder da t u een vertraging hoort tussen de inkomende en uitgaande signalen
• Se lecteer ‘USB Audio CO DEC’ als de
geluidsk aart voor zowel Inpu t als Output in de audio-instellingen van je syste em
* Opmerk ing * Zorg ervoor da t er geen “soft ware thru” -func tie is geacti veerd tijdens het opnemen.
(SE) Följ dess a steg för att sk apa inspelningar på din dator:
• Tryc k på LINE / USB FROM-knapp en för
att välja USB P LAY
• Tryc k på LINE / USB TO-knapp en för att
välja TELEFONER
• Stä ll 2-T RACK TO-knappe n i UPP-läge
(MAIN MIX)
• Ans lut mixern till en led ig USB-port
med den med följande USB-k abeln. Det tar några s ekunder för dato rn att känna igen din enhet
• Om d u använder en Windows -dator,
ladda ner Be hringer USB Audio Dri ver från supportavsnittet på behringer. com för at t uppnå låg latens. Alternativt kan du använda den gratis ASIO4ALL-dri vrutinen. Det ta gör att du kan övervaka dina inspelningar utan at t höra en fördröjn ing mellan inkommande och utgående signaler
• Välj ‘ USB Audio CODEC’ som ljudko rt för
både ingån g och utgång i syste mets ljudinställningar
* Obs * Se till a tt ingen “soft ware thru”
-funktion är aktiverad under inspelning.
(PL) 10. Wykonaj nas tępujące kroki, aby utwor zyć nagrania na komp uterze:
• Nac iśnij przycisk L INE / USB FROM, aby
wybra ć opcję USB PLAY
• Nac iśnij przycisk L INE / USB TO, aby
wybrać PHONES
• Us taw przycisk 2-TRACK TO w p ozycji
UP (MAIN MIX)
• Pod łącz mikser d o wolnego portu
USB za pomoc ą dołączone go kabla USB. Rozpozna nie urządzenia pr zez komputer potrwa kilka sekund
• Je śli korzysta sz z komputera z
systemem Windows, pobierz sterownik audio USB Beh ringer z sekcji Pomoc na stroni e behringer.com, aby uz yskać niskie opóźnienie. Alternatywnie możesz skor zystać z bez płatnego sterown ika ASIO4ALL. Umoż liwi to monitoro wanie nagrań bez s łyszenia opóźnienia między sygnałami przychodzącymi i wychodzącymi
• Wy bierz „USB Audio CODEC” ja ko kartę
dźwię kową dla wejścia i wyj ścia w ustawieniach audio systemu
* Uwaga * Upew nij się, że podcza s nagry wania nie jest wł ączona żadna funkcja „s oftware th ru”.
Page 14
26 27Quick Start GuideXENYX 302USB
Specications
Mic Input
Microphone Input
Type XLR/¼" combo connector, electronically balanced
Mic E.I.N.1 (20 Hz - 20 kHz)
@ 0 source re sistance -130 dB / -133.1 dB A-weighted @ 50 source re sistance -128 dB / -131.5 dB A-weig hted @ 150 source resi stance -127 dB / -129.8 dB A-wei ghted Frequency response (–1 dB) 18 Hz - 40 kHz Frequency response (–3 dB) < 10 Hz - 75 kHz Gain range +15 dB to +55 dB Max. input level +12 dBu @ +10 dB Gain Impedance 2 k Signal-to-noise ratio 98 dB / 101 dB A-weighte d (0 dBu in @ +2 2 dB Gain) Distortion (THD+N) 0.013 %
Freque ncy Respon se (Mic In Main Out)
18Hz - 40kHz +0 dB / -1 dB 10Hz - 75kHz +0 dB / -3 dB
Stereo Line Input
Type RCA jacks, unbalanced Impedance 6 k Gain range -∞ to +20 dB Max. input level +20 dBu
2-Track In
Type RCA jacks, unbalanced Impedance 20 k Max. input level +20 dBu
Headset Mic In
Type ⁄" TRS mini j ack Impedance 6 k Max. input level +22 dBu @ G ain Min
Equalizer
Low 80 Hz / ±15 dB High 12 kHz / ±15 dB
Main Outputs
Type RCA, unbalanced Impedance 470  Max. output level +22 dBu
Phones Output
Type ⁄" TRS mini j ack Max. output level +7 dBu / 150 
System Da ta (Noise)
Main mix @ -∞, chan nel fader @ -∞ -96 dBu / -101 dBu A-weighte d Main mix @ 0dB, ch annel fader @ -∞ -82 dBu / -87 dBu A -weighted Main mix @ 0dB, ch annel fader @ 0dB -80 dBu / -85 d Bu A-weighted
External USB Switching Power Supply
Input voltage 100-240 V~, 50/60 Hz Power consumption 3.6 W
302USB
Input voltage 5 VDC, 500 mA Power consumption 0.9 W
USB
Connector Type B Converter 16-b it Sample Rate 48 kHz
Size/Weight
Dimensio ns (H x W x D) 46 x 114 x 136 mm (1.8 x 4.5 x 5.4") Weight 0.38 kg (0.8 lbs)
1
Equivalent Input Noise
Page 15
28 29Quick Start GuideXENYX 302USB
Other important information
Important information Aspectos importantes
1. Register online.
Pleaseregister your new Music Tribe equipment right after you purchase it by visiting musictribe.com. Registeringyour purchase using our simple online form helps us to process your repair claims more quickly and eciently. Also, read the terms and conditions of our warranty, ifapplicable.
2. Malfunction. Should your Music Tribe Authorized Reseller not be located in your vicinity, you may contact the Music Tribe Authorized Fulller for your country listed under “Support” at musictribe.com. Shouldyour country not be listed, pleasecheck if your problem can be dealt with by our “OnlineSupport” which may also be found under “Support” at musictribe.com. Alternatively, please submit an online warranty claim at musictribe.com BEFORE returning theproduct.
3. Power Connections. Beforeplugging the unit into a power socket, please make sure you are using the correct mains voltage for your particular model. Faulty fuses must be replaced with fuses of the same type and rating withoutexception.
1. Registro online.
Lerecomendamos que registre su nuevo aparato Music Tribe justo después de su compra accediendo a la página web musictribe.com. Elregistro de su compra a través de nuestro sencillo sistema online nos ayudará a resolver cualquier incidencia que se presente a la mayor brevedad posible. Además,aproveche para leer los términos y condiciones de nuestra garantía, siesaplicable en sucaso.
2. Averías. En el caso de que no exista un distribuidor Music Tribe en las inmediaciones, puede ponerse en contacto con el distribuidor Music Tribe de su país, queencontrará dentro del apartado “Support” de nuestra página web musictribe.com. En caso de que su país no aparezca en ese listado, acceda a la sección “Online Support” (quetambiénencontrará dentro del apartado “Support” de nuestra páginaweb) y compruebe si su problema aparece descrito y solucionado allí. Deforma alternativa, envíenos a través de la página web una solicitud online de soporte en periodo de garantía ANTES de devolvernoselaparato.
3. Conexiones de corriente. Antes de enchufar este aparato a una salida de corriente, asegúrese de que dicha salida sea del voltaje adecuado para su modelo concreto. En caso de que deba sustituir un fusible quemado, deberáhacerlo por otro de idénticas especicaciones, sinexcepción.
Informations importantes
1. Enregistrez-vous enligne. Prenezle temps
d’enregistrer votre produit Music Tribe aussi vite que possible sur le site Internet musictribe.com. Lefait d’enregistrer le produit en ligne nous permet de gérer les réparations plus rapidement et plus ecacement. Prenezégalement le temps de lire les termes et conditions de notregarantie.
2. Dysfonctionnement. Si vous n’avez pas de revendeur Music Tribe près de chez vous, contactez le distributeur Music Tribe de votre pays: consultez la liste des distributeurs de votre pays dans la page “Support” de notre site Internet musictribe.com. Si votre pays n’est pas dans la liste, essayez de résoudre votre problème avec notre “aideen ligne” que vous trouverez également dans la section “Support” du site musictribe.com. Vouspouvez également nous faire parvenir directement votre demande de réparation sous garantie par Internet sur le site musictribe.com AVANT de nous renvoyer leproduit.
3. Raccordement au secteur. Avant de relier cet équipement au secteur, assurez-vous que la tension secteur de votre région soit compatible avec l’appareil. Veillez à remplacer les fusibles uniquement par des modèles exactement de même taille et de même valeur électrique — sans aucuneexception.
Weitere wichtige Informationen
1. Online registrieren.
Bitteregistrieren Sie Ihr neues Music Tribe-Gerät direkt nach dem Kauf auf der Website musictribe.com. WennSie Ihren Kauf mit unserem einfachen online Formular registrieren, könnenwir Ihre Reparaturansprüche schneller und ezienter bearbeiten. Lesen Sie bitte auch unsere Garantiebedingungen, fallszutreend.
2. Funktionsfehler. Sollte sich kein Music Tribe Händler in Ihrer Nähe benden, können Sie den Music Tribe Vertrieb Ihres Landes kontaktieren, der auf musictribe.com unter Support aufgeführt ist. Sollte Ihr Land nicht aufgelistet sein, prüfen Sie bitte, ob Ihr Problem von unserem Online Support gelöst werden kann, den Sie ebenfalls auf musictribe.com unter Support nden. Alternativ reichen Sie bitte Ihren Garantieanspruch online auf musictribe.com ein, BEVOR Sie das Produktzurücksenden.
3. Stromanschluss. Bevor Sie das Gerät an eine Netzsteckdose anschließen, prüfen Sie bitte, obSie die korrekte Netzspannung für Ihr spezielles Modell verwenden. Fehlerhafte Sicherungen müssen ausnahmslos durch Sicherungen des gleichen Typs und Nennwerts ersetztwerden.
Outras Informações Importantes
1. Registre-se online. Porfavor,
registreseu novo equipamento Music Tribe logo após a compra visitando o site musictribe.com Registrar sua compra usando nosso simples formulário online nos ajuda a processar seus pedidos de reparos com maior rapidez e eciência. Além disso, leia nossos termos e condições de garantia, caso sejanecessário.
2. Funcionamento Defeituoso. Casoseufornecedor
Music Tribe não esteja localizado nas proximidades, vocêpode contatar um distribuidor Music Tribe para o seu país listado abaixo de “Suporte” emmusictribe.com. Se seu país não estiver na lista, favor checar se seu problema pode ser resolvido com o nosso “SuporteOnline” que também pode ser achado abaixo de “Suporte”em musictribe.com. Alternativamente, favorenviar uma solicitação de garantia online em musictribe.com ANTES da devolução doproduto.
3. Ligações. Antes de ligar a unidade à tomada, assegure-se de que está a utilizar a voltagem correcta para o modelo em questão. Osfusíveis com defeito terão de ser substituídos, sem qualquer excepção, porfusíveis do mesmo tipo e correntenominal.
Informazioni importanti
1. Registratevi online.
Vi invitiamo a registrare il nuovo apparecchio Music Tribe subito dopo averlo acquistato visitando musictribe.com. La registrazione dell'acquisto tramite il nostro semplice modulo online ci consente di elaborare le richieste di riparazione in modo più rapido ed eciente. Leggete anche i termini e le condizioni della nostra garanzia, qualora applicabile.
2. Malfunzionamento. Nel caso in cui il rivenditore autorizzato Music Tribe non si trovi nelle vostre vicinanze, potete contattare il Music Tribe Authorized Fulller per il vostro paese, elencato in “Support” @ musictribe.com. Se la vostra nazione non è elencata, controllate se il problema può essere risolto tramite il nostro “Online Support”che può anche essere trovato sotto “Support” @ musictribe.com. In alternativa, inviate una richiesta di garanzia online su musictribe.com PRIMA di restituire il prodotto.
3. Collegamento all'alimentazione. Prima di
collegare l'unità a una presa di corrente, assicuratevi di utilizzare la tensione di rete corretta per il modello specico. I fusibili guasti devono essere sostituiti, senza eccezioni, con fusibili dello stesso tipo e valore nominale.
Page 16
30 31Quick Start GuideXENYX 302USB
Other important information
Belangrijke informatie Viktig information Ważna informacja
1. Register online.
Pleaseregister your new Music Tribe equipment right after you purchase it by visiting musictribe.com. Registeringyour purchase using our simple online form helps us to process your repair claims more quickly and eciently. Also, read the terms and conditions of our warranty, ifapplicable.
2. Malfunction. Should your Music Tribe Authorized Reseller not be located in your vicinity, you may contact the Music Tribe Authorized Fulller for your country listed under “Support” at musictribe.com. Shouldyour country not be listed, pleasecheck if your problem can be dealt with by our “OnlineSupport” which may also be found under “Support” at musictribe.com. Alternatively, please submit an online warranty claim at musictribe.com BEFORE returning theproduct.
3. Power Connections. Beforeplugging the unit into a power socket, please make sure you are using the correct mains voltage for your particular model. Faulty fuses must be replaced with fuses of the same type and rating withoutexception.
1. Registro online.
Lerecomendamos que registre su nuevo aparato Music Tribe justo después de su compra accediendo a la página web musictribe.com. Elregistro de su compra a través de nuestro sencillo sistema online nos ayudará a resolver cualquier incidencia que se presente a la mayor brevedad posible. Además,aproveche para leer los términos y condiciones de nuestra garantía, siesaplicable en sucaso.
2. Averías. En el caso de que no exista un distribuidor Music Tribe en las inmediaciones, puede ponerse en contacto con el distribuidor Music Tribe de su país, queencontrará dentro del apartado “Support” de nuestra página web musictribe.com. En caso de que su país no aparezca en ese listado, acceda a la sección “Online Support” (quetambiénencontrará dentro del apartado “Support” de nuestra páginaweb) y compruebe si su problema aparece descrito y solucionado allí. Deforma alternativa, envíenos a través de la página web una solicitud online de soporte en periodo de garantía ANTES de devolvernoselaparato.
3. Conexiones de corriente. Antes de enchufar este aparato a una salida de corriente, asegúrese de que dicha salida sea del voltaje adecuado para su modelo concreto. En caso de que deba sustituir un fusible quemado, deberáhacerlo por otro de idénticas especicaciones, sinexcepción.
1. Enregistrez-vous enligne. Prenezle temps
d’enregistrer votre produit Music Tribe aussi vite que possible sur le site Internet musictribe.com. Lefait d’enregistrer le produit en ligne nous permet de gérer les réparations plus rapidement et plus ecacement. Prenezégalement le temps de lire les termes et conditions de notregarantie.
2. Dysfonctionnement. Si vous n’avez pas de revendeur Music Tribe près de chez vous, contactez le distributeur Music Tribe de votre pays: consultez la liste des distributeurs de votre pays dans la page “Support” de notre site Internet musictribe.com. Si votre pays n’est pas dans la liste, essayez de résoudre votre problème avec notre “aideen ligne” que vous trouverez également dans la section “Support” du site musictribe.com. Vouspouvez également nous faire parvenir directement votre demande de réparation sous garantie par Internet sur le site musictribe.com AVANT de nous renvoyer leproduit.
3. Raccordement au secteur. Avant de relier cet équipement au secteur, assurez-vous que la tension secteur de votre région soit compatible avec l’appareil. Veillez à remplacer les fusibles uniquement par des modèles exactement de même taille et de même valeur électrique — sans aucuneexception.
FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATION
XENYX 302USB
Responsi ble Party Name: Music Tribe C ommercial NV In c.
Address: 5270 Procyon Street,
Phone Number: +1 702 800 8290
XENYX 302USB
This equ ipment has bee n tested and fo und to comply wi th the limits f or a Class B digita l device, purs uant to part 15 of th e FCC Rules. Thes e limits are de signed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy a nd, if not insta lled and used i n accordance wi th the instr uctions, may cause harmful interference to radio communications. However, there is no guarant ee that inter ference will n ot occur in a par ticular ins tallation. I f this equipment does cause harmful interference to radio or television reception, which ca n be determin ed by turning th e equipment o  and on, the user i s encoura ged to try to co rrect the i nterferen ce by one or more of t he following measures:
Reo rient or relo cate the recei ving antenna.
Inc rease the sep aration bet ween the equi pment and rec eiver.
Conn ect the equ ipment into an ou tlet on a circu it dierent f rom that to
which th e receiver is con nected.
Con sult the dealer o r an experien ced radio/T V technici an for help.
This devi ce complies wi th Part 15 of the FCC r ules. Opera tion is subjec t to the following two conditions:
(1) this device ma y not cause harm ful interf erence, and (2) this device must accept any interference received, including interference that may ca use undesire d operation .
Important information:
Changes o r modicat ions to the equi pment not exp ressly appro ved by Music Tribe can vo id the user’s aut hority to us e the equipme nt.
Hereby, Mus ic Tribe declare s that this pro duct is in comp liance with Dir ective 2014/35/ EU,Directive 2014/30/EU, Direc tive 2011/65/EU and Amendment 2015/863/EU, Dire ctive 2012/19/EU, Regul ation 519/2012 REACH SVHC an d Directive 1907/2006/EC.
Full text of EU DoC is available at https://community.musictri be.com/
EU Repres entative: Mu sic Tribe Brands D K A/S Addres s: Ib Spang Olsen s Gade 17, DK - 8200 Aa rhus N, Denmar k
Las Vegas NV 8 9118, United States
Page 17
We Hear You
Loading...