AT&T 992 Quick Start Guide

1

This Quick Reference Guide provides basic instructions. For complete
instructions which allow you to use all features of this phone, refer to
your Two-Line Speakerphone with Caller ID/Call Waiting 992 User's
Manual, Part 2. Page references are provided for your convenience.

INSTALLATION (Pages 5–11)

• Install a 9V alkaline battery (not included). The battery is needed for
feature operation during a power failure.

• Connect the handset and line cords.

• Connect the power adapter.

MENU OPERATION AND
FEATURE SETUP

(Pages 12 –24)

Use the on-screen menu to change settings for the 992 features and to program
the One Touch and Directory memories.

• Access the menu by pressing E when the phone is idle.

• Use + and - to move through the menu.

• Use < and > to change the settings.

• Press E to make a selection.

QUICK REFERENCE GUIDE

Two-Line Speakerphone with
Caller ID/Call Waiting 992

0992_QRG_1ATT_FINAL_021605 2/18/05 3:04 PM Page 1

Menu Structure

ONE TOUCH

PROGRAM
VIEW
AUTO SPEAKER
MAIN MENU

PHONE SETTINGS

PRIMARY LINE
ALS ON/OFF
PREFERRED MODE
SET TIME/DATE
LCD BACKLIGHT
SCROLL RATE
MAIN MENU

CALLER ID OPERATION (Pages 43–51)

Review Call History (Pages 46–47)

Press - to begin reviewing records in call history. Press + or - to move
through the list.

Dial a Number from Call History (Page 49)

Locate the number you want to call in call history. Then, lift the handset, press
K or press H, and press E to dial the number.

DIRECTORY OPERATION (Pages 37– 42)

Store an Entry in the Directory (Pages 38–39)

Press D to enter the directory, then, press - to scroll to ADD ENTRY.
Press E to select ADD ENTRY. Enter the name you want to store. Press
the dial key with the desired letter until that letter is shown in the display.
Repeat for each letter. (Press > if the next letter is on the same key). Press

store. Press E to select DONE.

Dial a Number from the Directory (Page 42)

Press D to enter the directory. Locate the name of the party you want
to call by pressing the dial pad key with the first letter of the name. Use - to
move through the directory if needed. Then, lift the handset, press K or
press H, and press E to dial the displayed number.

2

VOICE MESSAGE

L1 COVM ON/OFF
L2 COVM ON/OFF
L1 LIGHT OFF
L2 LIGHT OFF
MAIN MENU

CALLER ID

AREA CODES
CALL HISTORY
REPEAT CALLS
CID-CALL WAIT
MAIN MENU

LANGUAGE

0992_QRG_1ATT_FINAL_021605 2/18/05 3:04 PM Page 2

E to select ENTER NUMBER, then enter the phone number you want to