User Manual
User Manual
WL-167G V3 1-LF-ASU
IEEE 802.11n USB2.0 Adapter
v 01.draft
WL-167G V3 |
1 |
User Manual
WL-167G V3
Table of Contents
Chapter 1Introduction ________________________________________________________ 4
1.Introduction ________________________________________________________ 4
1.1Product Features____________________________________________________ 4
1.2Applications _______________________________________________________ 4 Chapter 2 Hardware _______________________________________________________ 5
2.1General Overview __________________________________________________ 5
2.2Hardware Architecture _______________________________________________ 5
2.3Main Chipset Information ____________________________________________ 5 Chapter 3 Software _______________________________________________________ 5
3.1Operating System Supported __________________________________________ 6
3.2Wireless Mode Supported ____________________________________________ 6
3.3Security___________________________________________________________ 6
3.4Configuration ______________________________________________________ 6 Chapter 4 Appearance _____________________________________________________ 7 Chapter 5 Specifications ___________________________________________________ 8 Table 1: Modulation Scheme and Nominal Transmit Power _________________________ 10
WL-167G V3 |
2 |
User Manual
Revision History
Edition # |
|
Reason for revision |
Issue date |
Written by |
|
|
|
|
|
V 01 |
|
Initial Document |
Feb 12 2010 |
Troy Chen |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
WL-167G V3 |
3 |
User Manual
Chapter 1 Introduction
1.Introduction
WL-167G V3 is an industrial wireless 802.11n USB Adapter which enables wireless networking systems to attain data communication speeds up to 150 megabits-per-second (Mbps), while remaining backward compatible to the existing installed base of Wi-Fi systems worldwide. It supports operation to the IEEE 802.11b and IEEE 802.11g ,and draft IEEE 802.11n standards. WL-167G V3 will enable a next generation of high-data-rate platforms for operation in the 2.4 GHz band that deliver a five-fold speed increase. The cost and performance advantages will make it an ideal solution for high bandwidth enterprise applications, such as wireless video conferencing and large file transfers. It is compatible with 802.11g standard's mandatory modulation schemes—Complementary Code Keying (CCK), which is used in 802.11b, and Orthogonal Frequency Division Multiplexing (OFDM), used in 802.11g and draft 802.11n. Using CCK ensures backward-compatibility with the installed Wi-Fi 802.11b base, while OFDM provides the speed required for today's high-bandwidth applications.
1.1Product Features
High speed for wireless LAN connection, RX up at 150 Mbps data rate.
Backward compatible to the existing IEEE 802.11b/g WLAN infrastructure.
An user-friendly utility to configure SSID, security setup and site survey.
Wireless data encryption with 64, 128 encryption for security.
Internal antenna
Support USB v2.0
Key type housing
WPS support (Pin code)
1.2Applications
Home networking for device sharing.
Wireless multimedia.
Wireless office for extension Ethernet range.
Mobile networking for notebook PC, Desktop PC, Monitor, PDA with USB port ready device.
WL-167G V3 |
4 |