Asus B85M-V PLUS User’s Manual

0 (0)

B85M-V PLUS

<![if ! IE]>

<![endif]>Motherboard

E9606

First Edition

August 2014

Copyright © 2014 ASUSTeK COMPUTER INC. All Rights Reserved.

No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”).

Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing.

ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.

SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.

Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners’ benefit, without intent to infringe.

Offer to Provide Source Code of Certain Software

This product contains copyrighted software that is licensed under the General Public License (“GPL”), under the Lesser General Public License Version (“LGPL”) and/or other Free Open Source Software Licenses. Such software in this product is distributed without any warranty to the extent permitted by the applicable law. Copies of these licenses are included in this product.

Where the applicable license entitles you to the source code of such software and/or other additional data, you may obtain it for a period of three years after our last shipment of the product, either

(1)for free by downloading it from http://support.asus.com/download

or

(2)for the cost of reproduction and shipment, which is dependent on the preferred carrier and the location where you want to have it shipped to, by sending a request to:

ASUSTeK Computer Inc.

Legal Compliance Dept.

15 Li Te Rd.,

Beitou, Taipei 112

Taiwan

In your request please provide the name, model number and version, as stated in the About Box of the product for which you wish to obtain the corresponding source code and your contact details so that we can coordinate the terms and cost of shipment with you.

The source code will be distributed WITHOUT ANY WARRANTY and licensed under the same license as the corresponding binary/object code.

This offer is valid to anyone in receipt of this information.

ASUSTeK is eager to duly provide complete source code as required under various Free Open Source Software licenses. If however you encounter any problems in obtaining the full corresponding source code we would be much obliged if you give us a notification to the email address gpl@asus.com, stating the product and describing the problem (please DO NOT send large attachments such as source code archives, etc. to this email address).

ii

Contents

Safety information......................................................................................................

iv

About this guide..........................................................................................................

iv

Package contents.......................................................................................................

vi

B85M-V PLUS specifications summary....................................................................

vi

Chapter 1:

Product introduction

 

1.1

Before you proceed......................................................................................

1-1

1.2

Motherboard overview..................................................................................

1-1

1.3

Central Processing Unit (CPU)....................................................................

1-3

1.4

System memory............................................................................................

1-6

1.5

Expansion slots.............................................................................................

1-8

1.6

Headers........................................................................................................

 

1-10

1.7

Connectors..................................................................................................

 

1-11

1.8

Software support.........................................................................................

1-19

Chapter 2:

BIOS information

 

2.1

Managing and updating your BIOS

.............................................................2-1

2.2

BIOS setup program.....................................................................................

2-6

2.3

My Favorites

..................................................................................................

2-9

2.4

Main menu...................................................................................................

 

2-10

2.5

Ai Tweaker menu.........................................................................................

2-11

2.6

Advanced menu..........................................................................................

2-11

2.7

Monitor menu..............................................................................................

2-12

2.8

Boot menu...................................................................................................

 

2-13

2.9

Tool menu....................................................................................................

 

2-14

2.10

Exit menu.....................................................................................................

 

2-14

Appendices

 

 

Notices......................................................................................................................

 

A-1

ASUS contact information......................................................................................

A-3

iii

Safety information

Electrical safety

To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system.

When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected. If possible, disconnect all power cables from the existing system before you add a device.

Before connecting or removing signal cables from the motherboard, ensure that all power cables are unplugged.

Seek professional assistance before using an adapter or extension cord. These devices could interrupt the grounding circuit.

Ensure that your power supply is set to the correct voltage in your area. If you are not sure about the voltage of the electrical outlet you are using, contact your local power company.

If the power supply is broken, do not try to fix it by yourself. Contact a qualified service technician or your retailer.

Operation safety

Before installing the motherboard and adding devices on it, carefully read all the manuals that came with the package.

Before using the product, ensure all cables are correctly connected and the power cables are not damaged. If you detect any damage, contact your dealer immediately.

To avoid short circuits, keep paper clips, screws, and staples away from connectors, slots, sockets and circuitry.

Avoid dust, humidity, and temperature extremes. Do not place the product in any area where it may become wet.

Place the product on a stable surface.

If you encounter technical problems with the product, contact a qualified service technician or your retailer.

About this guide

This user guide contains the information you need when installing and configuring the motherboard.

How this guide is organized

This guide contains the following parts:

Chapter 1: Product introduction

This chapter describes the features of the motherboard and the new technology it supports.

Chapter 2: BIOS information

This chapter tells how to change system settings through the BIOS Setup menus. Detailed descriptions of the BIOS parameters are also provided.

iv

Where to find more information

Refer to the following sources for additional information and for product and software updates.

1.ASUS websites

The ASUS website provides updated information on ASUS hardware and software products. Refer to the ASUS contact information.

2.Optional documentation

Your product package may include optional documentation, such as warranty flyers, that may have been added by your dealer. These documents are not part of the standard package.

Conventions used in this guide

To ensure that you perform certain tasks properly, take note of the following symbols used throughout this manual.

DANGER/WARNING: Information to prevent injury to yourself when trying to complete a task.

CAUTION: Information to prevent damage to the components when trying to complete a task

IMPORTANT: Instructions that you MUST follow to complete a task.

.

NOTE: Tips and additional information to help you complete a task.

Typography

Bold text

Indicates a menu or an item to select.

Italics

Used to emphasize a word or a phrase.

<Key>

Keys enclosed in the less-than and greater-than sign

 

means that you must press the enclosed key.

 

Example: <Enter> means that you must press the Enter or

 

Return key.

<Key1> + <Key2> + <Key3>

If you must press two or more keys simultaneously, the key

 

names are linked with a plus sign (+).

v

Package contents

Check your motherboard package for the following items.

Motherboard

ASUS B85M-V PLUS motherboard

 

 

 

Cables

2 x Serial ATA 6.0 Gb/s cables

 

 

 

Accessories

1 x I/O Shield

 

 

 

Application DVD

Support DVD

 

 

 

Documentation

User Guide

 

 

 

 

 

 

If any of the above items is damaged or missing, contact your retailer.

B85M-V PLUS specifications summary

CPU

LGA1150 socket for New 4th Generation Intel® CoreTM i7/ i5 / i3, Pentium®

 

and Celeron® Processors

 

Supports 22nm CPU

 

Supports Intel® Turbo Boost Technology 2.0*

 

* Intel® Turbo Boost Technology 2.0 support depends on the CPU types.

 

** Refer to www.asus.com for Intel® CPU support list.

Chipset

Intel® B85 Express Chipset

Memory

2 x DIMMs, max. 16GB DDR3 1600/1333/1066MHz, non-ECC, unbuffered

 

memory modules

 

Dual-channel memory architecture

 

Supports Intel® Extreme Memory Profile (XMP)

 

* Hyper DIMM support is subject to the physical characteristics of individual

 

CPUs. Please refer to Memory QVL for details.

 

** Refer to www.asus.com for the latest Memory QVL (Qualified Vendors List).

 

*** Due to Intel® chipset limitations, DDR3 1600MHz and higher memory modules

 

on XMP mode will run at the maximum transfer rate of DDR3 1600MHz.

Graphics

Expansion slots

Storage

LAN

Integrated Graphics Processor - Intel® HD Graphics support Multi-VGA output support: DVI-D, RGB port

-Supports DVI-D with max. resolution up to 1920 x1200@60Hz

-Supports RGB with max. resolution 1920x1200@60Hz

-Supports Intel® InTruTM 3D/Quick Sync Video/Clear Video HD Technology/InsiderTM

-Maximum shared memory of 1024MB

1 x PCI Express 3.0/2.0 x16 slot (at x16 mode) 2 x PCI Express 2.0 x1 slots

Intel® B85 Express Chipset:

-4 x Serial ATA 6.0 Gb/s connectors (gray)

-2 x Serial ATA 3.0 Gb/s connectors (black)

-Supports Intel® Rapid Start Technology* and Intel® Smart Connect Technology*

*These functions will work depending on the CPU installed.

Realtek® RTL8111GR Gigabit LAN Controller

(continued on the next page)

vi

B85M-V PLUS specifications summary

Audio

Realtek® ALC887 8-Channel High Definition Audio CODEC

 

- Supports Jack-Detection and Front Panel Jack-Retasking

USB

ASUS unique features

*Use a chassis with HD audio module in the front panel to support an 8-channel audio output

Intel® B85 Express Chipset - supports ASUS USB 3.0 Boost

- 4 x USB 3.0/2.0 ports (2 ports at mid-board, 2 ports at the rear panel)

Intel® B85 Express Chipset

- 8 x USB 2.0/1.1 ports (4 ports at mid-board, 4 ports at the rear panel)

ASUS 5X Protection

-ASUS motherboards safeguard your PC with 5X Protection: DIGI+VRM, DRAM Fuse, ESD Guards, High-Quality 5K-Hour Solid Capacitors,

and Stainless Steel Back I/O to ensure the best quality, reliability, and durability

ASUS DIGI+VRM

-ASUS Digital Power Control: Digital Power Design for the CPU

-ASUS 4 Phase Power Design

-ASUS CPU power utility

ASUS DRAM Fuse

-Enhanced DRAM overcurrent protection and short circuit damage prevention

ASUS ESD Guards

- Strong ESD protection for extended component lifespan

ASUS High-Quality 5K-Hour Solid Capacitors

- 2.5x Long Lifespan with excellent durability

ASUS Stainless Steel Back I/O

- 3x More durable corrosion-resistant coating

ASUS EPU

- EPU

ASUS Exclusive Features:

-ASUS USB 3.0 Boost

-ASUS GPU Boost

-ASUS AI Charger

-ASUS AI Suite 3

-ASUS Anti-surge Protection

-ASUS ESD

ASUS Quiet Thermal Solution

-ASUS Fanless Design: Stylish Heatsink solution

-ASUS Fan Xpert

ASUS Q-Design

- ASUS Q-Slot

ASUS EZ DIY:

-ASUS UEFI BIOS EZ Mode featuring a friendly graphical user interface

-ASUS CrashFree BIOS 3

-ASUS EZ Flash 2

(continued on the next page)

vii

B85M-V PLUS specifications summary

Back Panel I/O ports

Internal I/O connectors

BIOS features

Manageability

Support DVD

Operating System

Support

Form factor

1 x PS/2 keyboard port (purple)

1 x PS/2 mouse port (green)

2 x USB 3.0/2.0 ports

4 x USB 2.0/1.1 ports

1 x DVI port

1 x D-Sub port

1 x LAN (RJ-45) port

3 x Audio jacks support 8-channel audio output

2 x USB 2.0/1.1 connectors support additional 4 USB 2.0/1.1 ports 1 x USB 3.0/2.0 connectors support additional 2 USB 3.0/2.0 ports 4 x SATA 6.0Gb/s connectors

2 x SATA 3.0Gb/s connectors

1 x COM header

1 x TPM header

1 x CPU fan connector

1 x Chassis fan connector

1 x Front panel audio connector

1 x S/PDIF Out connector

1 x 24-pin EATX power connector

1 x 4-pin EATX 12V power connector

1 x Speaker connector

1 x System panel connector

1 x CLRTC jumper (2-pin)

64 Mb Flash ROM, UEFI AMI BIOS, PnP, DMI2.0, WfM2.0, SM BIOS 2.7, ACPI 4.0a, Multi-language BIOS, ASUS EZ Flash 2, ASUS CrashFree

BIOS 3, My Favorites, Quick Note, Last Modified log, F12 PrintScreen, F3

Shortcut functions and ASUS DRAM SPD (Serial Presence Detect) memory information

WfM 2.0, DMI 2.0, WOL by PME, PXE

Drivers

ASUS utilities

EZ Update

Anti-virus software (OEM version)

Windows® 8.1

Windows® 8

Windows® 7

uATX form factor: 8.9 in x 7.1 in (22.6 cm x 18 cm)

Specifications are subject to change without notice.

viii

Product introduction

1

1.1Before you proceed

Take note of the following precautions before you install motherboard components or change any motherboard settings.

• Unplug the power cord from the wall socket before touching any component.

Before handling components, use a grounded wrist strap or touch a safely grounded object or a metal object, such as the power supply case, to avoid damaging them due to static electricity.

Hold components by the edges to avoid touching the ICs on them.

Whenever you uninstall any component, place it on a grounded antistatic pad or in the bag that came with the component.

Before you install or remove any component, ensure that the ATX power supply is switched off or the power cord is detached from the power supply. Failure to do so may cause severe damage to the motherboard, peripherals, or components.

1.2Motherboard overview

Before you install the motherboard, study the configuration of your chassis to ensure that the motherboard fits into it.

Ensure that you unplug the power cord before installing or removing the motherboard.

Failure to do so can cause you physical injury and damage motherboard components.

1.2.1Placement direction

When installing the motherboard, ensure that you place it into the chassis in the correct orientation. The edge with external ports goes to the rear part of the chassis as indicated in the image below.

1.2.2Screw holes

Place six screws into the holes indicated by circles to secure the motherboard to the chassis.

Do not overtighten the screws! Doing so can damage the motherboard.

ASUS B85M-V PLUS

1-1

Place this side towards

the rear of the chassis

B85M-V PLUS

1.2.3Motherboard layout

 

 

 

1

 

2

2

3

 

 

 

 

 

 

 

 

18.0cm(7.1in)

 

 

 

 

 

 

 

 

 

 

 

CPU_FAN

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

KBMS

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DIGI

 

 

 

 

 

 

 

 

 

 

 

 

+VRM

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ATX12V

 

 

 

 

 

 

 

 

USB3_12

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

USB34

 

 

LGA1150

<![if ! IE]>

<![endif]>DVI

<![if ! IE]>

<![endif]>VGA

LAN_USB56

CHA_FAN

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

BATTERY

 

 

 

 

 

 

 

 

 

 

 

AUDIO

 

 

 

 

 

 

 

 

COM

 

 

 

 

 

B85M-V PLUS

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PCIEX16

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Realtek

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

8111GR

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Super

 

 

 

 

 

PCIEX1_1

 

 

 

 

 

 

 

 

 

 

 

Intel®

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

I/O

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

B85

 

 

 

 

 

 

ALC

 

 

 

 

PCIEX1_2

 

USB1112

 

 

 

 

 

 

 

 

 

 

 

 

 

 

887-VD2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

USB910

 

 

 

 

 

 

 

 

 

 

 

 

 

AAFP

 

SPDIF_OUT

 

 

 

 

 

TPM

 

 

 

 

 

 

USB3_1314

 

SATA3G_1 SATA3G_2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4

<![if ! IE]>

<![endif]>DDR3 DIMM A1 (64bit, 240-pin module)

<![if ! IE]>

<![endif]>DDR3 DIMM B1 (64bit, 240-pin module)

<![if ! IE]>

<![endif]>EATXPWR

<![if ! IE]>

<![endif]>22.6cm(8.9in)

 

 

 

<![if ! IE]>

<![endif]>SATA6G 4

8Mb

<![if ! IE]>

<![endif]>3

<![if ! IE]>

<![endif]>SATA6G

BIOS

SPEAKER

F_PANEL

CLRTC

SATA6G_1 SATA6G_2

15

14 13

12

11

10

9

5

1

5

6

7

8

1-2

Chapter 1: Product introduction

1.2.4Layout contents

Connectors/Jumpers/Slots/LED

Page

1.

ATX power connectors (24-pin EATXPWR, 4-pin ATX12V)

1-15

2.

CPU and chassis fan connectors (4-pin CPU_FAN, 4-pin CHA_FAN)

1-14

3.

Intel® LGA1150 CPU socket

1-3

4.

DDR3 DIMM slots

1-6

5.

Intel® B85 Serial ATA 6.0Gb/s connector (7-pin SATA6G_1~4 [gray])

1-16

6.

Speaker connector (4-pin SPEAKER)

1-15

7.

System panel connector (10-1 pin F_PANEL)

1-17

8.

Clear RTC RAM (2-pin CLRTC)

1-10

9.

Intel® B85 Serial ATA 3.0Gb/s connector (7-pin SATA3G_1~2 [black])

1-16

10.

USB 3.0 connector (20-1 pin USB3_1314)

1-17

11.

USB 2.0 connectors (10-1 pin USB1112, USB910)

1-14

12.

TPM header (20-1 pin TPM)

1-18

13.

Digital audio connector (4-1 pin SPDIF_OUT)

1-13

14.

Front panel audio connector (10-1 pin AAFP)

1-13

15.

Serial port connectors (10-1 pin COM)

1-18

1.3Central Processing Unit (CPU)

This motherboard comes with a surface mount LGA1150 socket designed for New 4th Generation Intel® Core™ i7 / i5 / i3, Pentium® and Celeron® processors.

B85M-V PLUS

B85M-V PLUS CPU socket LGA1150

Unplug all power cables before installing the CPU.

Upon purchase of the motherboard, ensure that the PnP cap is on the socket and

the socket contacts are not bent. Contact your retailer immediately if the PnP cap is missing, or if you see any damage to the PnP cap/socket contacts/motherboard components. ASUS will shoulder the cost of repair only if the damage is shipment/ transit-related.

Keep the cap after installing the motherboard. ASUS will process Return Merchandise Authorization (RMA) requests only if the motherboard comes with the cap on the LGA1150 socket.

The product warranty does not cover damage to the socket contacts resulting from incorrect CPU installation/removal, or misplacement/loss/incorrect removal of the PnP cap.

ASUS B85M-V PLUS

1-3

Asus B85M-V PLUS User’s Manual

1.3.1Installing the CPU

1

A

B

2

3

 

4

C

5

 

A

 

1-4

Chapter 1: Product introduction

1.3.2CPU heatsink and fan assembly installation

Apply the Thermal Interface Material to the CPU heatsink and CPU before you install the heatsink and fan if necessary.

To install the CPU heatsink and fan assembly

1

A

2

 

 

B

B

A

3

4

ASUS B85M-V PLUS

1-5

To uninstall the CPU heatsink and fan assembly

1 2 A

B

B

A

1.4System memory

1.4.1Overview

This motherboard comes with two Double Data Rate 3 (DDR3) Dual Inline Memory Module (DIMM) sockets. A DDR3 module is notched differently from a DDR or DDR2 module. DO NOT install a DDR or DDR2 memory module to the DDR3 slot.

According to Intel® CPU spec, DIMM voltage below 1.65V is recommended to protect the CPU.

<![if ! IE]>

<![endif]>DIMM A1

<![if ! IE]>

<![endif]>DIMM B1

 

 

Channel

Sockets

B85M-V PLUS

Channel A

DIMM_A1

 

Channel B

DIMM_B1

B85M-V PLUS 240-pin DDR3 DIMM sockets

1.4.2Memory configurations

You may install 1GB, 2GB, 4GB, and 8GB unbuffered non ECC DDR3 DIMMs into the DIMM sockets.

1-6

Chapter 1: Product introduction

Loading...
+ 32 hidden pages