ARRIS VIP5662W Users Manual

VIP5662W

Wireless IPTV Receiver

Installation Guide

TO REDUCE RISK OF ELECTRIC SHOCK,

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

Graphical symbols and supplemental warning markings are located on the back and bottom of the terminal.

WARNING

TO REDUCE THE RISK OF FIRE OR SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

The lightning ﬂash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufﬁcient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

Product identiﬁcation and supply rating are provided on the label found on the bottom of the unit.

IMPORTANT SAFETY INSTRUCTIONS

• Read these instructions.

• Keep these instructions.

• Heed all warnings.

• Follow all instructions.

• Do not use this apparatus near water.

• Clean only with a dry cloth.

• Do not block any ventilation openings. Install according to the manufacturer’s instructions.

• Do not install near any heat sources, such as radiators, heat registers, stoves, or other apparatus (including ampliﬁers) that produce heat.

• Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

• Only use attachments/accessories speciﬁed by the manufacturer.

• Unplug this apparatus during lightning storms or when unused for long periods of time.

• Refer all servicing to qualiﬁed service personnel. Servicing is required when the apparatus has been damaged in any way, such as the power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

This manual includes the manufacturer’s recommended safeguards and all the information needed to connect your receiver to both your in-home IP network and your entertainment system. The safety and installation information was developed and provided primarily by the receiver manufacturer, ARRIS Enterprises, Inc.

ii VIP5662W Wireless IPTV Receiver Installation Guide

Follow these important safety guidelines when positioning and connecting your wireless receiver:

• Do not block the slots and openings.

• Do not place anything on top of the wireless receiver.

• Do not position the wireless receiver in a conﬁned space, such as an enclosed cabinet, that does not provide adequate ventilation.

• Do not position the wireless receiver near any external heat source that could raise the temperature around the unit. Do not place the wireless receiver on top of another heat producing electronic device.

• Allow for adequate ventilation around the wireless receiver to maintain normal operating temperature. Do not place it in a sealed enclosure without providing for adequate airﬂow.

• Use only the power adapter and cord supplied to connect the VIP5662W to your home AC power outlet.

• If the wireless receiver is used outdoors (patio, balcony, etc.), it should be protected from moisture and from prolonged exposure to direct sunlight which could cause heat damage. Note also that adequate ventilation must be maintained, even if the wireless receiver is operated outdoors.

• Do not plug the AC power adapter into a switched power outlet.

• Always transport the receiver in its original factory carton, or in an equally well-padded container.

• Whether installed or being transported, do not expose the receiver to temperature extremes. The temperature range for operation is from 0° to +40°C. The non-operating (transport or storage) temperature range is from -40° to +60°C.

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. THE UNIT MUST NOT BE EXPOSED TO DRIPPING OR SPLASHING. DO NOT PLACE OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, ON THE UNIT. CAUTION: THIS PRODUCT WAS QUALIFIED UNDER TEST CONDITIONS THAT INCLUDED THE USE OF THE SUPPLIED CABLES BETWEEN SYSTEMS COMPONENTS. TO ENSURE REGULATORY AND SAFETY COMPLIANCE, USE ONLY THE PROVIDED POWER AND INTERFACE CABLES AND INSTALL THEM PROPERLY. CAUTION: DIFFERENT TYPES OF CORD SETS MAY BE USED FOR CONNECTIONS TO THE MAIN SUPPLY CIRCUIT. USE ONLY A MAIN LINE CORD THAT COMPLIES WITH ALL APPLICABLE PRODUCT SAFETY REQUIREMENTS OF THE COUNTRY OF USE. CAUTION: INSTALLATION OF THIS PRODUCT MUST BE IN ACCORDANCE WITH NATIONAL WIRING CODES AND CONFORM TO LOCAL REGULATIONS. CAUTION: DO NOT OPEN THE UNIT. DO NOT PERFORM ANY SERVICING OTHER THAN THAT CONTAINED IN THE INSTALLATION AND TROUBLESHOOTING INSTRUCTIONS. REFER ALL SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION: CHANGES AND MODIFICATIONS NOT EXPRESSLY APPROVED BY ARRIS FOR COMPLIANCE COULD VOID USER’S AUTHORITY TO OPERATE THE EQUIPMENT

VIP5662W Wireless IPTV Receiver Installation Guide iii

Contents

Introduction ............................................................ 1

Overview ..............................................................2

Top View and Front Panel ..................................................2

Rear Panel..............................................................3

Remove Hard Drive Procedure .............................................. 4

Insert Hard Drive Procedure ...............................................5

Wireless Connection ..................................................... 6

Connecting Your TV Receiver ............................................... 7

Digital Audio/Video Connections ............................................ 9

Component Video and Digital Audio Connections .............................. 10

Composite Video and Stereo Audio Connections............................... 11

Troubleshooting ........................................................ 12

iv VIP5662W Wireless IPTV Receiver Installation Guide

Introduction

Congratulations on receiving your ARRIS VIP5662W Wireless IPTV Receiver.

The VIP5662W provides these extraordinary home entertainment features:

• Wireless input via the Access Point lets you easily position or move your video entertainment system anywhere in your residence -- or even outside -- without network wires or cables

• Ultra High Deﬁnition TV (UHDTV), with up to twice the color resolution and up to six times the sharpness of standard TV when connected to a UHD-capable TV

• A direct digital connection to consumer audio and video devices through multiple interfaces

• Bluetooth connectivity via remote control unit. Refer to your service provider for more information

This installation manual introduces the basic features, outlines important safeguards, and provides options for integrating your wireless receiver into your entertainment system. Please take a few moments to read through this manual. Its conﬁguration diagrams and troubleshooting section will help you make the most of your home entertainment experience.

Included in the carton:

• VIP5662W Wireless Ultra High-Deﬁnition (UHD)

• Power adapter

• Other accessories may be included

For more information about your TV service, refer to the other documentation from your service provider.

VIP5662W Wireless IPTV Receiver Installation Guide 1

Overview

Top and Front Panel

The illustrations below (Top view and Front Panel view, respectively) and the table following describe the top/front-panel features, controls, and indicator lights.

Key Item Function

1 POWER

BUTTON

2 SIGNAL

STRENGTH

3 LINK Lights green when the ethernet is connected.

4 Bluetooth Lights blue when the remote control unit is paired with the

5 RECORD Lights red when a recording is in progress.

2 VIP5662W Wireless IPTV Receiver Installation Guide

Press to turn the wireless receiver on or place the unit in standby mode. If held for ﬁve (5) seconds or longer, restarts the wireless receiver.

The ﬁve-bar display lights green to indicate signal strength from your wireless Access Point device. The number of bars that light reﬂect the strength of the received signal (the more bars, the stronger the signal. See the Troubleshooting section for details.

wireless receiver.

Overview

Rear Panel

The illustration below and the table following list the rear-panel features, controls, and connectors of the VIP5662W.

Key Item Function

1 POWER

+12 VDC

Connector for the DC power adapter. Use only the adapter speciﬁed for this VIP5662W.

2 NETWORK Ethernet 10/100Base-T RJ-45 port.

3 RESET

BUTTON

4 OPTICAL TOSLink (S/PDIF) digital audio output.

5 BREAKAWAY

CABLE

CONNECTION

6 HDMI™ OUT Connects to a High Deﬁnition TV or home theater receiver

7 USB 3.0 Allows connectivity with USB 3.0 devices.

8 BLUETOOTH

PAIRING

VIP5662W Wireless IPTV Receiver Installation Guide 3

Link LED: lights when connected to video service. Blutooth LED: blinks when the wireless receiver searches for Bluetooth remote control unit within range.

Press and release to trigger the System Recovery Process.

Alternative method for video/audio connections. Offers analog component, composite, and stereo audio outputs.

with an HDMI input (for a DVI input, use an HDMI-to-DVI adapter).

Press and release to initiate Bluetooth remote control unit pairing with wireless receiver. Hold the button for 10 seconds to unpair the Bluetooth remote control unit and the wireless receiver.

Remove Hard Drive Procedures

To remove the Hard Drive into the VIP5662W, perform the following procedure.

1. Turn unit off.

2. Flip unit upside down.

3. Grip levers on either side of hard drive compartment and squeeze to release.

4. Slide hard drive out of compartment then lift up to remove.

4 VIP5662W Wireless IPTV Receiver Installation Guide

+ 16 hidden pages