Amana PK301W, PK301E, PK301L, PK301SS Installation Instructions

Bottom Freezer Refrigerator PK301 Decorator Panel Kit Installation Instructions

Parts List

	Decorator Panel Kit Number
	PK301W		PK301E	PK301L	PK301SS
Color	White		Ebony	Almond	Stainless Steel
Description	Part Numbers
Refrigerator door decorator panel	10096951		10096955	10096953	10704712
Freezer door decorator panel	10096952		10096956	10096954	10704713
Refrigerator panel spacer	10234615		10234615	10234615	---
Freezer panel spacer	10234616		10234616	10234616	---

!CAUTION

To avoid personal injury or property damage, Fresh Food panel should not weigh more than 30 lbs (14 kgs) and Deepfreeze® panel should not weigh more than 15 lbs (7 kgs).

Procedure

Important

•Permanent double-sided tape is used to attach side trim pieces. Before removing paper backing check placement of trim pieces on door. Trim pieces may be damaged if adjustment or removal is attempted after installation.

•If doors need to be reversed, refer to TK230 or TK231 Reversibility Kit instructions prior to installing panels or trim. (See dealer for appropriate reversibility kit)

1. Verify panel dimensions.

Fresh Food Door	41" X 351/8"
	104 mm X 89 mm
Deepfreeze® Door	2115/16" X 355/8"
	56 mm X 90 mm

2.Remove refrigerator door handle by removing screws. Slide panel in place. Verify cardboard spacer attached to back of panel is positioned behind panel. Stainless Steel panels do not have a cardboard spacer.

3.Replace door handle. Install left side trim by removing tape backing and placing over refrigerator door handle.

4.Slide panel in place on freezer door. Verify cardboard spacer attached to back of panel is positioned behind panel.

5.Align right freezer door trim. Check placement then peel off paper backing and press trim firmly in place.

Fresh Food Door

Deepfreeze® Door

Decorator door panel
Door handle
Door handle trim
	Trim
Phillips screws	Decorator door panel

Part No. 10599709	©
Printed in U.S.A.	1997 Amana Appliances
	Amana, Iowa 52204