Amana NFW7500VW01, NFW7500VM01 Owner’s Manual

0 (0)

r®

FRONT-LOADING

AUTOMATICWASHER

For questions about features, operation/performance,

parts, accessories or service, call: 1-800-688-9900

or visit our website at...

www.amana.com

LAVEUSE

AUTOMATIQUE)_

CHARGEMENTFRONTAL

Au Canada, pour assistance, installation ou service, composez le :

Table of Contents/Table des matieres .................. 2

1-800-807-6777

ou visitez notre site Internet A

www.maytag.ca

Designed to use only HE

High Efficiency Detergent

Congue pour I'utilisation

d'un d6tergent haute

efficacit6 seulement

461970250991A

TABLEOF CONTENTS

TABLEDESMATIERES

WASHER SAFETY .......................................................................... 3

INSTALLATION REQUIREMENTS ................................................ 4

Tools and Parts ............................................................................ 4

Options ......................................................................................... 4

Location Requirements ................................................................ 4

Drain System ................................................................................ 6

Electrical Requirements ............................................................... 6

INSTALLATION INSTRUCTIONS .................................................. 7

Remove Transport System .......................................................... 7

Connect the Inlet Hoses ............................................................... 7

Route the Drain Hose ................................................................... 8

Secure the Drain Hose ................................................................. 8

Level the Washer .......................................................................... 8

Complete Installation ................................................................... 9

FEATU RES AN D BEN EFITS .......................................................... 9

WASHER USE .............................................................................. 10

Starting Your Washer ................................................................ 10

Using the Proper Detergent ...................................................... 10

Using the Dispenser .................................................................. 11

Pausing or Restarting ................................................................ 12

Changing Cycles, Options, and Modifiers ................................ 12

Status Lights ............................................................................. 13

Cycles ........................................................................................ 13

Normal Washer Sounds ............................................................ 14

Options ...................................................................................... 15

Modifiers .................................................................................... 15

Laundry Guide ........................................................................... 16

LAUNDRY TIPS ........................................................................... 16

Loading ...................................................................................... 17

WASHER CARE ........................................................................... 17

Cleaning Your Washer .............................................................. 17

Water Inlet Hoses ...................................................................... 18

Vacation, Storage, and Moving Care........................................ 18

TROUBLESHOOTING ................................................................. 19

ASSISTANCE OR SERVICE ........................................................ 22

In the U.S.A............................................................................... 22

In Canada .................................................................................. 22

WARRANTY ................................................................................. 23

SleCURITle DE LA LAVEUSE ....................................................... 24

EXIGENCES D'INSTALLATION .................................................. 25

Outillage et pieces ..................................................................... 25

Options ...................................................................................... 25

Exigences d'emplacement ........................................................ 25

Systeme de vidange .................................................................. 27

Specifications electriques ......................................................... 28

INSTRUCTIONS D'INSTALLATION ............................................ 29

#limination des accessoires de transport ................................. 29

Raccordement des tuyaux d'alimentation ................................ 29

Acheminement du tuyau de vidange ........................................ 30

Immobilisation du tuyau de vidange ......................................... 30

Reglage de I'aplomb de la laveuse ........................................... 30

Achever I'installation ................................................................. 31

CARACTI_RISTIQUES ET AVANTAGES .................................... 31

UTILISATION DE LA LAVEUSE .................................................. 32

Mise en marche de la laveuse................................................... 32

Utilisation du detergent approprie ............................................ 32

Utilisation du distributeur .......................................................... 33

Pause ou remise en marche ...................................................... 34

Changement des programmes, options et modificateurs ........ 35

T6moins lumineux ..................................................................... 35

Programmes .............................................................................. 36

Sons normaux emis par la laveuse ........................................... 37

Options ...................................................................................... 37

Modificateurs ............................................................................. 38

Guide de lessivage .................................................................... 39

CONSEILS DE LESSIVAGE ......................................................... 40

Chargement ............................................................................... 40

ENTRETIEN DE LA LAVEUSE .................................................... 41

Nettoyage de la laveuse ............................................................ 41

Tuyaux d'arrivee d'eau .............................................................. 42 Precautions & prendre avant les vacances, un entreposage

ou un dem6nagement ............................................................... 42

DlePANNAGE ................................................................................ 43

ASSISTANCE OU SERVICE ........................................................ 46

Au Canada ................................................................................. 46

GARANTIE .................................................................................... 47

WASHERSAFETY

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.

This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."

These words mean:

You can be killed or seriously injured if you don't immediately_ follow instructions.

You can be killed or seriously injured if you don't follow instructions.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can

happen if the instructions are not followed.

IMPORTANT SAFETY INSTRUCTIONS

WARNING: To reduce the risk of fire, electric shock, or injury to persons when using the washer, follow basic precautions,

including the following:

[] Read all instructions before using the washer. [] Do not wash articles that have been previously cleaned

in, washed in, soaked in, or spotted with gasoline,

dry=cleaning solvents, other flammable, or explosive substances as they give off vapors that could ignite or

explode.

[] Do not add gasoline, dry-cleaning solvents, or other

flammable, or explosive substances to the wash water. These substances give off vapors that could ignite or

explode.

[] Under certain conditions, hydrogen gas may be

produced in a hot water system that has not been used for 2 weeks or more. HYDROGEN GAS IS

EXPLOSIVE. If the hot water system has not been

used for such a period, before using the washing

machine, turn on all hot water faucets and let the water

flow from each for several minutes. This will release any accumulated hydrogen gas. As the gas is

flammable, do not smoke or use an open flame during this time.

SAVE THESE INSTRUCTIONS

Do not allow children to play on or in the washer. Close supervision of children is necessary when the washer is used

near children.

Before the washer is removed from service or discarded,

remove the door or lid.

[] Do not reach into the washer if the drum, tub or agitator is

moving.

[] Do not install or store the washer where it will be exposed to

the weather.

[] Do not tamper with controls. [] Do not repair or replace any part of the washer or attempt any

servicing unless specifically recommended in this manual or in published user-repair instructions that you understand and

have the skills to carry out.

[] See "Electrical Requirements" for grounding instructions.

INSTALLATIONREQUIREMENTS

I J ,,]I0 ........_,=v_

Gather the required tools and parts before starting installation. The parts supplied are in the washer drum.

Tools needed for connecting the water inlet hoses

• Pliers (that open to 19/_6'' [39.5 mm])

• Flashlight (optional)

Tools needed for installation

• Open end wrenches 17 mm and 13 mm

• Level

• Wood block

• Ruler or measuring tape NOTE: Replace inlet hoses after 5 years of use to reduce the risk

of hose failure. Record hose installation or replacement dates for future reference.

Parts supplied:

A B

Pedestal

You have the option of purchasing pedestals of different heights separately for this washer. You may select a 10" (254 mm) or a

15.5" (394 mm) pedestal. These pedestals will add to the total height of the washer for a total height of approximately 48" (1219 mm) or 53.5" (1359 mm).

A B

A. 10" (254 mm) pedestal B. 15.5" (394 mm) pedestal

A. Drain hose form B. Inlet hose (2)

C. Inlet hose washer (4) D. Transport bolt hole plug (4) E. Beaded strap

Alternate Parts

Your installation may require additional parts. If you are interested in purchasing one of the items listed here, call the toll-free

number on the cover or in the "Assistance or Service" section.

If You Have You Will Need to Buy

Laundry tub or Sump pump system (if not already standpipe taller available) than 96" (2.4 m)

Overhead sewer Standard 20 gal. (76 L), 30" (762 mm) tall

drain tub or utility sink and sump pump (available from local plumbing suppliers)

Floor drain Siphon break, Part Number 285834;

additional drain hose Part Number 8318155; and

connector kit, Part Number 285835

Drain hose too 4 ft (1.2 m) drain hose extension kit, short Part Number 285863

Water faucets 2 longer water fill hoses: beyond reach of fill 6 ft (1.8 m) Part Number 76314, hoses 10 ft (3.0 m) Part Number 350008

To order, call the dealer from whom you purchased your washer or refer to the "Assistance or Service" section.

Pedestal Color Part Number Height

10" (254 mm) White WHP1000SQ

15.5" (394 ram} White XHP1550VW

15.5" (394 ram} Burgundy XHP1550VM

Stack Kit

Are you planning to stack your washer and dryer? To do so you will need to purchase a Stack Kit.

To order, call the dealer from whom you purchased your dryer or refer to the "Assistance or Service" section. Ask for Part

Number 8541503.

Selecting the proper location for your washer improves performance and minimizes noise and possible washer "walk."

Your washer can be installed under a custom counter, or in a basement, laundry room, closet, or recessed area. See "Drain

System." Companion appliance location requirements should also be

considered. Proper installation is your responsibility.

You will need

• A water heater set to deliver 120°F (49°C) water to the washer.

• A grounded electrical outlet located within 6 ft (1.8 m) of where the power cord is attached to the back of the washer. See "Electrical Requirements."

• Hot and cold water faucets located within 4 ft (1.2 m) of the hot and cold water fill valves, and water pressure of 20-100 psi (137.9-689.6 kPa).

A level floor with a maximum slope of 1" (25 mm) under entire washer. Installing the washer on soft floor surfaces, such as carpets or surfaces with foam backing, is not

recommended.

• A sturdy and solid floor to support the washer with a total weight (water and load) of 400 Ibs (180 kg).

Do not operate your washer in temperatures below 32°F (0°C). Some water can remain in the washer and can cause damage in low temperatures.

Installation clearances

• The location must be large enough to allow the washer door to be fully opened.

• Additional spacing should be considered for ease of installation and servicing.

• Additional clearances might be required for wall, door, and floor moldings.

• Additional spacing of 1" (25 mm) on all sides of the washer is recommended to reduce noise transfer.

Companion appliance spacing should also be considered.

Washer Dimensions

8i"

(1295ram}

27"

(888ram}

Recommended installation spacing for recessed or closet installation, with or without a pedestal

The dimensions shown are for the recommended spacing. Recessed area or closet installation

34,,_ 48 in.2*:_

(3100mm2)

(864ram)

24 in.2.

(1550rnrn2)

I1"N-311/2"÷14"F_-

(28mm)(800mm)(102mm)

A B

A. Side view - closet or confined area B. Closet door with vents

*Min. top and bottom air openings for closet door.

Recessed or closet installation - Washer on pedestal

(76ram)

-f

8,,

(70ram)

311/2"

(800rnrn)

Recommended installation spacing for custom undercounter installation

The dimensions shown are for the recommended spacing. Custom undercounter installation - Washer only

39" rain.

(990ram)

1"---_--- 27"---_._-= 1"

(25ram) (686ram} (25ram)

A. Recessed area B. Side view - closet or confined area

Recommended installation spacing for recessed or closet installation, with stacked washer and dryer

Thedimensions shown are for the recommended spacing.

48 in.2*

(3100mm2)

3"* (76 mm)

7c-

24 in? * +

(1550mm2)

II" I_ 311/2"_I 4"1

(25mm)(800mm)(102mm)

1"* (25mm)

*Required spacing

The top of the standpipe must be at least 30" (762 mm) high and no higher than 96" (2.4 m) from the bottom of the washer.

__ii

76"

(1930ram)

5½"**-_

(140mm)

1" _ _ 27" -_.-I

(25 mm) (686 mm} (25 mm)

*Required spacing

**For venting out the side, 1" (25 mm) spacing is allowed.

Recommended installation spacing for cabinet installation

The dimensions shown are for the recommended spacing. For cabinet installation, with a door, the minimum ventilation

openings in the top are required.

" } 7" (178rnrn}

, (229ram}

30"rain.

(782mm}

A B

Laundry tub drain system (view C) The laundry tub needs a minimum 20 gal. (76 L) capacity. The top

of the laundry tub must be at least 30" (762 mm) above the floor.

Floor drain system (view D) The floor drain system requires a siphon break that may be

purchased separately. See "Tools and Parts." The siphon break must be a minimum of 28" (710 mm) from the

bottom of the washer. Additional hoses might be needed.

C D

(102ram} (800ram} (25ram}(25ram} (688ram} (28ram}

1" 27" 1"

t*'i_ _'_¢_¢_"

The washer can be installed using the standpipe drain system (floor or wall), the laundry tub drain system, or the floor drain system. Select the drain hose installation method you need.

See "Tools and Parts."

Standpipe drain system - wall or floor (views A & B) The standpipe drain requires a minimum diameter standpipe of

2" (50 mm). The minimum carry-away capacity can be no less than 17 gal. (64 L) per minute.

Electrical Shock Hazard

Plug into a grounded 3 prong outlet. Do not remove ground prong. Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death,

fire, or electrical shock.

• A 120 volt, 60 Hz., AC only, 15- or 20-amp, fused electrical supply is required. A time-delay fuse or circuit breaker is recommended. It is recommended that a separate circuit serving only this appliance be provided.

• This washer is equipped with a power supply cord having a 3 prong grounding plug.

• Tominimizepossibleshockhazard,thecordmustbe pluggedintoamating,3prong,ground-typeoutlet,grounded inaccordancewithlocalcodesandordinances.Ifamating outletisnotavailable,itisthepersonalresponsibilityand obligationofthecustomertohavetheproperlygrounded outletinstalledbyaqualifiedelectrician.

• Ifcodespermitandaseparategroundwireisused,itis recommendedthataqualifiedelectriciandeterminethatthe groundpathisadequate.

• Donotgroundtoagaspipe.

• Checkwithaqualifiedelectricianifyouarenotsurethe washerisproperlygrounded.

• Donothaveafuseintheneutralorgroundcircuit.

There are 4 bolts in the rear panel of the washer that support the suspension system during transportation. These bolts also retain the power cord inside the washer until the bolts are removed.

GROUNDING iNSTRUCTiONS

For a grounded, cord=connected washer: This washer must be grounded. In the event of a malfunction or breakdown, grounding will reduce the risk of electrical

shock by providing a path of least resistance for electric current. This washer is equipped with a cord having an equipment-grounding conductor and a grounding plug. The

plug must be plugged into an appropriate outlet that is

properly installed and grounded in accordance with all local codes and ordinances.

WARNING: improper connection of the equipment-

grounding conductor can result in a risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the appliance is properly grounded.

Do not modify the plug provided with the appliance - if it will

not fit the outlet, have a proper outlet installed by a qualified electrician.

For a permanently connected washer: This washer must be connected to a grounded metal,

permanent wiring system, or an equipment grounding conductor must be run with the circuit conductors and

connected to the equipment=grounding terminal or lead on the appliance.

Using a 13 mm wrench, loosen each of the bolts.

Once the bolt is loose, move it to the center of the hole and completely pull out the bolt, including the plastic spacer covering the bolt.

3. Once all 4 bolts are removed, discard bolt and spacers. Then pull the power cord through the opening of the rear panel and

close the hole with the attached cap.

4. Close the bolt holes with the 4 transport bolt hole plugs.

NOTE: If the washer is to be transported at a later date, call your local service center. To avoid suspension and structural damage

to your washer, it must be properly set up for relocation by a certified technician.

Insert new flat washers (supplied) into each end of the inlet hoses. Firmly seat the washers in the couplings.

INSTALLATIONINSTRUCTIONS

Excessive Weight Hazard

Use two or more people to move and install washer.

Failure to do so can result in back or other injury.

IMPORTANT: Position the washer so that the rear of the washer is within approximately 3 ft (900 ram) of its final location.

A B

A. Coupling B. Washer

Make sure the washer drum is empty.

Attach the hose with the red color indicator to the Hot (left) inlet valve. Attaching the red coupling first makes it easier to tighten connection with pliers. Screw on coupling by hand

until it is seated on the washer.

4. Attach the hose with the blue color indicator to the Cold

(right) water inlet valve. Screw on coupling by hand until it is seated on the washer.

H. Hot water inlet C. Cold water inlet

Using pliers, check the tightness of the hose couplings already attached to the washer.

NOTE: Do not overtighten. Damage to the coupling can result.

Attach hot water hose to the hot water faucet. Screw on coupling by hand until it is seated on the washer.

Attach cold water hose to the cold water faucet. Screw on coupling by hand until it is seated on the washer.

Using pliers, tighten the couplings with an additional two-thirds turn.

Laundry tub drain or standpipe drain

Connect the drain hose form to the corrugated drain hose.

A. Snap either end of the drain hose form to the drain hose at

the point where the corrugation begins.

B. Bend drain hose over drain hose form and snap into place.

To keep drain water from going back into the washer:

• Do not straighten the drain hose, and do not force excess drain hose into standpipe. Hose should be secure, but loose enough to provide a gap for air.

• Do not lay excess hose on the bottom of the laundry tub.

Floor drain

You may need additional parts. See Floor drain under "Tools and Parts."

_%¢;s© Ai67t"e, DI'{ t"" Mp,'_fWs'_

Drape the power cord over the washer top.

Secure the drain hose to the laundry tub leg or standpipe with the beaded strap provided. (See illustrations A and B.)

NOTE: Do not overtighten. Damage to the coupling can result.

Turn on the water faucets and check for leaks. NOTE: Replace inlet hoses after 5 years of use to reduce the

risk of hose failure. Record hose installation or replacement dates on the hoses for future reference.

Periodically inspect and replace hoses if bulges, kinks, cuts, wear, or leaks are found.

Proper routing of the drain hose protects your floors from damage due to water leakage. Read and follow these

instructions. Remove drain hose from washer cabinet

Gently pull the corrugated drain hose from the shipping clips.

A B C

If the washer faucets and the drain standpipe are recessed (see illustration C), put the hooked end of the drain hose in the standpipe. Tightly wrap the beaded strap around the

water inlet hoses and the drain hose.

Do not force excess drain hose into the standpipe.

Properly leveling your washer avoids excessive noise and vibration.

1. Check the levelness of the washer by placing a level on the top edge of the washer, first side to side, then front to back.

If the washer is against a wall, move the washer out slightly before tipping back. If the washer is not level, first prop the front with a wood block and adjust the feet as necessary; then prop the back and adjust feet as necessary. Repeat this step until washer is level.

2. Makesureallfourfeetarestableandrestingonthefloor. Thencheckthatthewasherisperfectlylevel(usealevel).

3. Afterthewasherislevel,usea17mmopen-endwrenchto turnthenutsonthefeettightlyagainstthewashercabinet.

IMPORTANT:Allfourfeetmustbetightened.Ifthenutsare nottightagainstthewashercabinet,thewashermayvibrate.

4. Thewashershouldnotmovefronttoback,sidetoside, ordiagonallywhenpushedonitstopedges.

5. Slidethewashertoitsfinallocation.

6. Confirmthelevelnessofthewasher.

1. Checktheelectricalrequirements.Besurethatyouhavethe correctelectricalsupplyandtherecommendedgrounding method.See"ElectricalRequirements."

2. Check that all parts are now installed. If there is an extra part, go back through the steps to see which step was skipped.

3. Check that you have all of your tools.

4. Dispose of/recycle all packaging materials.

5. Check that the water faucets are on.

6. Check for leaks around faucets and inlet hoses.

Electrical Shock Hazard

Plug into a grounded 3 prong outlet. Do not remove ground prong.

Do not use an adapter. Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

Plug into a grounded 3 prong outlet.

Read "Washer Use."

To test and clean your machine, make sure there are no clothes in the washer and add one AFFRESH TM tablet to the

washer drum. Select Power, the Clean Washer cycle and then select START. This cycle will take approximately 50 minutes to complete. Allow the washer to complete the entire cycle without interruption.

FEATURESAND BENEFITS

Electronic Controls Flexible electronic controls are easy to use whether you are a

beginner or an expert.

Smart Dispensers The Smart Dispensers make your washer truly automatic. This

washer provides a three-compartment dispenser which includes separate compartments for main wash detergent, fabric softener, and bleach. The dispenser has large pour zones. The dispenser is self-cleaning, and can be easily removed. Laundry products are diluted with fresh water and added to the load at the proper time in the wash cycle.

Auto Water Level This washer automatically adjusts water level for optimal cleaning

and rinsing performance. Two sensors determine load size, load composition, and suds level, then the sensors adjust the water level to the proper setting. This eliminates guesswork. The water level is just right for every wash load size.

Larger Load Size Since there is no agitator, you can wash larger, bulkier items such

as a king-sized bedspread. You are also able to wash more clothes at one time, which means fewer loads.

Stainless Steel Drum The stainless steel drum eliminates corrosion and enables higher

spin speeds for more water extraction, helping to reduce drying time compared to traditional top-load washers.

High-Efficiency Wash System

Your new front-loading, high-efficiency washer saves time with fewer, larger loads. It also lowers your water and energy bills by helping conserve resources.

Spin Speeds

This washer automatically selects the spin speed based on the cycle selected. This factory setting can be changed, however. This washer offers up to five different spin speed choices.

Heating Element

This washer has a heating element that automatically heats the water to the optimal temperature on select cycles. This enables stepped cleaning, a process in which warm water is brought in and mixed with detergent first, then the water is heated. Stepped cleaning starts the wash cycle with warm water to remove stains (such as blood and grass).

Auto Load Sensing Technology

Intuitive intelligence "knows every load" determining load sizes, water levels, and how much cleaning time is needed.

Add Clothes

When this option is available at the beginning of the cycle, the Add Clothes Status Light will glow for the first 8 minutes. This washer allows an 8-minute period in which other garments may

be added to a load.

Direct Injection Wash System

This washer channels 100% of the water through the dispensers to assure thorough rinse-out and mixture of all the laundry products before they touch any garments. The water is then sprayed from the top front onto the center of the load, providing even distribution and optimum cleaning performance. It is normal for small amounts of water to remain in the dispensers when the wash cycle is complete.

Efficient Detergent System with Anti-Escape Valve

This washer has a specially designed valve that closes during the wash portion of the cycle so that 100% of the water and detergent mixture is used on the load. The Efficient Detergent System ensures that no water or detergent is wasted.

6-Point Suspension System

Shock absorbers, 2 springs, and electronic controls are specially designed to help redistribute the load automatically and minimize movement of the wash drum during the spin cycle. The 6-Point Suspension System reduces the amount of force transmitted to the floor by the washer, resulting in reduced noise and vibration.

WASHERUSE

Power CUSTOM CYCLE OPTIONS

2nd Rinse 0

P ..... h 0 Exte_$ed 0

Sounds

Sutton 0

oo0 @

NOTE: The panel shown above may be different from that of your model.

Delay

Start

MDDIFIERS R Extra Hot IHigh

R Heavy Temp []Warm* _Lo_d

[] Normal [] Extra Low [] Soft

JUght ICoM J No Spin _Off

Auto [] Hot []Medium

Contro [] Warm [] Low

0 0 0 o0

Soil Level Wash Temp Spin Speed t_oleSignal

WARM RINSE S_LEC ION HOUJ TO r]qK/

ON OCK CON fROLS

Fire Hazard

Never place items in the washer that are dampened with gasoline or other flammable fluids.

No washer can completely remove oil,

Do not dry anything that has ever had any type of oil on it (including cooking oils),

Doing so can result in death, explosion, or fire.

WARNING: To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT SAFETY INSTRUCTIONS before

operating this appliance. The following is a guide to using your washer. Please refer to

specific sections of this manual for more detailed information. Do not store laundry products on the top surface of this washer.

Vibration is normal during operation.

Use only High Efficiency detergents. The package for this type of detergent will be marked "HE" or "High Efficiency." This wash system, along with less water, will create too much sudsing with a regular non-HE detergent. Using regular detergent will likely result in washer errors, longer cycle times, and reduced rinsing performance. It may also result in component failures and noticeable mold or mildew. HE detergents are made to produce the right amount of suds for the best performance. Follow the manufacturer's instructions to determine the amount of detergent to use. Remember, concentrated detergents such as 2x or higher will use less detergent based on load size.

Use only HE High Efficiency detergent.

First Wash Cycle Without Laundry

Before washing clothes for the first time, if not completed during the final installation step, choose the Normal/Casual cycle and run it without clothes. Use only HE High Efficiency detergent. Use

1/2the manufacturer's recommended amount for a medium-size load. This initial cycle serves to ensure the interior is clean before

washing clothes.

For All Wash Cycles

1. Open the washer door by pulling on the handle. Sort laundry according to color and type of fabric. Place a load of sorted clothes in the washer. Do not overload washer. Overloading can cause poor cleaning.

• The washer can be fully loaded, but not tightly packed.

Washer door should close easily.

• Mix large and small items and avoid washing single items.

Load evenly.

Wash small items, such as infant socks, in mesh garment bags. It is recommended that more than one garment bag be used, and that each garment bag be filled with equal

amounts of material.

• When unloading garments, check under the gray colored seal at the front of the tub for small items.

Close the washer door by pushing it firmly until the lock clicks. The washer door will remain locked during the wash cycle.

NOTES:

After any wash cycle is completed, the door must be opened and then closed before a new cycle can begin.

The door can be opened only if STOP is selected while the Add Clothes light is glowing or if the cycle has been

canceled.

• See "To cancel a cycle" in "Changing Cycles, Options, and Modifiers" section.

3. Open the dispenser drawer and add laundry products to the detergent, bleach, or fabric softener compartments. Close drawer slowly to avoid spills. See "Using the Dispenser."

4. Turn on the washer by selecting POWER. Select one of the cycles by turning the cycle selector. The indicator light for the selected cycle will glow green. When selecting a wash cycle, the preset options and modifiers (such as Wash Temp, Spin Speed, and Soil Level) for the selected cycle will glow green. Selectable options will glow amber. If an option or modifier is unavailable with a selected cycle, the light will not illuminate. The display shows the estimated time remaining. The preset settings provide the recommended fabric care for the selected cycle. See "Cycles."

5. Select the desired Options. Not all options are available with all cycles. See "Options."

6. Select the desired modifiers such as Wash Temp, Spin Speed, and Soil Level. Not all modifiers are available with all cycles and options. See "Modifiers."

7. If desired, select the CYCLE SIGNAL. The signal is helpful when you are washing items that should be removed from the washer as soon as it stops. Select Loud, Soft, or Off.

8. If desired, select BUTTON SOUNDS. This feature makes a sound each time a button is pressed. Select Loud, Soft, or

Off.

9. Select and hold START for approximately 1 second.

• If you do not select START within 5 minutes of choosing a

cycle, the washer automatically shuts off.

• When the wash cycle is complete, the CLOTHES CLEAN

status light glows, the door unlocks, and the wash load can be removed from the washer. The washer powers down automatically 60 minutes after the cycle is complete and the CLOTHES CLEAN light goes off. To power down the washer manually after the wash cycle is complete, select STOP once.

10. To use the same cycle again, press POWER first, then select START.

11. To begin the wash cycle later Select DELAY START until the desired delay time (in hours)

shows in the Estimated Time Remaining display. Select START. The countdown to the wash cycle will show in the display window.

IMPORTANT: When delaying a cycle, use only powdered detergents in the main wash compartment since liquid detergents may seep out of the compartment during Delay Start, before the wash cycle begins.

13s g © s©ense

Your new washer has a dispenser drawer with three separate compartments for your laundry products--one is for detergent, one is for liquid chlorine bleach, and one is for liquid fabric softener. Laundry products are diluted and dispensed automatically at the proper time during the wash cycle, making it unnecessary for you to return to the washer during the cycle to add them.

It is normal for small amounts of water to remain in the dispensers when the wash cycle is complete.

Do not put laundry products directly into the wash tub. Always use the proper dispensers when adding laundry products.

Choosing the Right Detergent

to use.

Use only HE High Efficiency detergent.

Tofill dispenser compartments

Pull out the dispenser drawer.

Add the desired laundry product to the proper compartment.

Push in the dispenser drawer slowly and completely (to avoid a spill).

__..__j.___ r---.=.=._fq_._J_ .........................................................C

Dispenser

A.Detergent type selector B.Main Washdetergent compartment C.Dispenser releaselever D.Chlorine bleach compartment E.Fabric softener compartment

Main Wash detergent compartment

(Letter B in Dispenser Illustration) Add liquid or powdered HE detergent to this compartment for

your main wash cycle. The detergent type selector (A) must always be in the correct position for the detergent type used. Slide the detergent type selector to the correct position.

IMPORTANT: If you are using the Delay Start option, powdered detergent must be used in the Main Wash compartment, since liquid detergents may seep out of the Main Wash compartment before the main wash begins.

• Use the detergent manufacturer's recommended amount for load size.

Liquid or powdered color-safe bleach may be added to the Main Wash compartment along with the same type of detergent, liquid or powdered.

Liquid detergent:

A ..................../

Selector in position for liquid detergent

A. Detergent type selector

Powdered detergent:

Fabric softener compartment (Letter E in Dispenser Illustration)

Pour measured liquid fabric softener into the fabric softener dispenser, if desired.

IMPORTANT: Dilute all fabric softener with water for a total of 1/4cup (60 mL).

• Do not overfill. The dispenser holds 1/4cup (60 mL).

• Do not spill or drip any fabric softener onto the clothes. NOTES:

• Use only liquid fabric softener in this dispenser.

• Do not use fabric softener dispensing balls in this washer. Dispensing balls will not operate correctly with this washer.

To pause the washer at any time, press STOP.

To continue the cycle, press START (for approximately 1 second).

{:s C!!c Op *o "s .......

Not all Options and Modifiers are available with all cycles. Available modifiers will glow amber. If an option or modifier is unavailable with a selected cycle, the light will not illuminate. Cycles, Options, and Modifiers can be changed anytime before

START is selected. Options and Modifiers can be changed anytime after START is

selected and before the start of the selected Option or Modifier.

To cancel a cycle and select a new cycle

1. Press STOP twice.

2. Press POWER.

3. Select desired cycle.

4. Select the desired Options or modifiers such as Wash Temp, Spin Speed, and Soil Level.

5. Press START (for approximately 1 second) to restart the washer at the beginning of the new cycle.

Selectorin position for powdered detergent

A.Detergent type selector

Chlorine bleach compartment (Letter D in Dispenser Illustration)

Add no more than 2/s cup (160 mL) liquid chlorine bleach to this compartment. The bleach will be automatically diluted and dispensed at the optimum time during the first rinse after the wash cycle. This compartment cannot dilute powdered bleach.

• Always measure liquid chlorine bleach. Use a measuring cup with a pour spout; do not guess.

• Do not fill beyond the "MAX" level. NOTE: Overfilling could cause garment damage.

• At the end of the cycle, a small amount of water may be left in the dispenser. This is normal.

To cancel a cycle

1. Press STOP twice.

2. The washer powers down, the door unlocks, and clothes can be removed.

NOTE: If the water level or the temperature is too high, the washer will drain automatically before the door unlocks.

To change Options or Modifiers after the cycle has started

1. Press STOP once.

2. Select the desired Options or modifiers such as Wash Temp, Spin Speed, and Soil Level. Available selections will glow

amber.

3. Press START (for approximately 1 second) to continue the cycle.

To drain the washer manually

1. Press STOP twice.

2. Press POWER.

3. Select RINSE/DRAIN & SPIN.

4. Press START (for approximately 1 second) to begin the drain.

5. When the spin is complete, the door unlocks. Items can be removed from the washer.

These lights show which portion of the cycle the washer is operating. They also indicate when you can add an additional item to the wash cycle and when the controls are locked.

Add Clothes

This washer allows an 8-minute period in which other garments may be added to the load. You can add items to the washer if the Add Clothes status light is glowing.

To add items when Add Clothes light is glowing

1. Select STOP once. The washer door unlocks, and items can be added.

2. To continue the cycle, close the door and select and hold START (for approximately 1 second).

To add items when the Add Clothes light is not glowing

1. Select STOP twice. This will cancel the wash cycle and options. The washer door unlocks, and items can be added.

2. Close the door and select the new cycle and options. Select and hold START (for approximately 1 second).

NOTES:

• When selecting a new cycle do not add additional detergent.

• Adding an item after the "Add Clothes" light is off may not allow for proper cleaning of that item.

Clothes Clean

To lock the controls Select and hold CYCLE SIGNAL for 3 seconds.

I Loud [] Soft

@o_

o©

UNLOCK CONTROLS

The status light next to the CYCLE SIGNAL button will glow.

To unlock the controls

Select and hold CYCLE SIGNAL for 3 seconds until the status light turns off. NOTE: To lock or unlock the controls when the washer is off,

press and hold CONTROLS LOCK/UNLOCK for 3 seconds.

Door Locked

Whenthe status light glows, the door islocked.

Sensing/Revising Estimated Time

The cycle times vary automatically based on your water pressure, water temperature, detergent, and clothes load.

The washer will automatically sense the progress in the cycle and adjust the Estimated Time Remaining display. While the washer is sensing, the estimated time will flash and the Sensing status light will glow. When the sensing is complete, the flashing stops, the status light goes off, and the Estimated Time Remaining display is updated.

The cycle time will be extended if oversudsing occurs or the load is unbalanced. The SUD routine removes extra suds and assures

proper rinsing of your garments. See "Troubleshooting." During the unbalance routine, the time displayed may pause until this activity is complete, then resume with the remainder of the cycle.

Cycles can be selected by turning the Cycle Control knob to the desired cycle. Each cycle is designed for different types of fabric

and soil levels. The modifier indicator lights, on the right-hand side of the panel, will change as cycles are selected.

N o rmal /Ca su aJ Ou ick Wa sh

Heavy Duty. _'/" _- . _, Handwash /

...././ _start Delicate

When the wash cycle is complete, the CLOTHES CLEAN status light glows, the door unlocks, and the wash load can be removed from the washer. The washer powers down automatically 60 minutes after the cycle is complete and the CLOTHES CLEAN light goes off.

Controls Lock/Unlock to Cycle Signal

The Control Lock avoids unintended use of the washer. You can also use the control lock feature to avoid unintended cycle or option changes during a cycle. When CONTROL LOCKED is lit,

all buttons are disabled except for STOP and START. You can lock the controls while the washer is operating.

Sen tery- ....... C_Eean WaSoher

• Each cycle has a preset Soil Level (estimated cycle time), Water Temperature, and Spin Speed, and may have preset options. The preset settings provide the recommended fabric care for the selected cycle.

• The preset settings will glow green to show the preselected options and modifiers, and can be changed anytime before START is pressed. Not all options and modifiers are available with all cycles. Available selections glow amber. (Tochange settings after the cycle has started, press STOP once, then select the desired settings. Press START to continue the cycle.)

• Powdered detergents may not dissolve well in a slow-speed cycle. For best results, use liquid detergent in slow-speed cycles.

Preset cycle settings Each cycle has a preset Soil Level (cycle time), Wash Temp, and

Spin Speed. The preset settings provide the recommended fabric care for the selected cycle. See chart.

Cycle Soil Level Wash Temp Spin

(cycletime) Speed

Sanitary Normal Extra Hot/Cold High

(1:50)

Whitest Normal Hot/Cold High Whites (1:15)

Heavy Duty Normal Hot/Cold High

(1:05)

Normal/ Normal Warm/Cold High Casual (0:50)

Quick Wash Normal Warm/Cold Medium

(0:40)

Handwash/ Normal Warm/Cold Medium Delicate (0:40)

Rinse/Drain N/A Cold/Cold High & Spin (0:20)

Clean N/A High Washer

To change the preset cycle settings Press the selector of each available setting until the desired

setting glows green.

Sanitary

Use this cycle to clean heavily soiled, colorfast fabrics. This cycle combines a extra hot water temperature and fast speed tumbling to help ensure the removal of heavy soils and stains. It is recommended that you set your hot water heater to 120°F (49°C) to ensure proper performance during this cycle. High speed spin helps shorten drying time.

Whitest Whites

This cycle is especially designed for cleaning loads of soiled white fabrics with the addition of bleach. Hot washing

temperatures assure optimal bleach activity. An additional rinse provides optimal rinse performance to avoid chlorine residues on

your laundry. This cycle combines fast-speed tumbling, longer wash time, and High speed spin to shorten drying time.

Quick Wash

Use this cycle to wash small loads of 2-3 lightly soiled garments that are needed in a hurry. This cycle combines fast-speed tumbling, a shortened wash time, and extra high speed spin to shorten drying time. Large wash loads will result in the machine increasing the wash time.

Handwash/Delicate

Use this cycle to clean hand washable and special-care garments. Similar to the way garments are hand washed in a

sink, the wash action of this cycle combines periods of low speed tumbling and soaking. Medium speed spin helps reduce

wrinkling.

• Use mesh garment bags to wash undergarments such as underwire bras, items with strings, and small items such as infant socks.

• Powdered detergents may not dissolve well in a slow-speed cycle. For best results, use liquid detergent for slow-speed

cycles.

Rinse/Drain & Spin

This is a combined cycle. See below for detailed instructions on each option.

Use this cycle to rinse, drain, and spin your wash load. This cycle combines fast-speed tumbling and high-speed spin. If desired, you can reduce the spin speed by selecting the speed you want

from the SPIN SPEED modifier. A Rinse/Drain & Spin cycle is useful for

• Loads that need rinsing only.

• Adding fabric softener to a load using the fabric softener dispenser.

Clean Washer

Use the Clean Washer cycle once a month to keep the inside of your washer fresh and clean. This cycle uses a higher water level. Use with AFFRESH TM washer cleaner tablet or liquid chlorine bleach to thoroughly clean the inside of your washing machine. This cycle should not be interrupted. See "Cleaning Your Washer"

in the "Washer Care" section.

• IMPORTANT: Do not place garments or other items in the washer during the Clean Washer cycle. Use this cycle with an empty wash drum.

Heavy Duty

Use this cycle to wash loads of sturdy, colorfast fabrics and heavily soiled garments. This cycle combines fast-speed tumbling, longer wash time, and High speed spin to shorten

drying times. If the water temperature is lower than needed for this cycle, the heater will warm the water to the optimum

temperature.

Normal/Casual

Use this cycle to wash loads of no-iron fabrics, such as sport shirts, blouses, casual business clothes, permanent press blends, cottons and linens, and synthetic fabrics. This cycle combines medium-speed tumbling, high-speed spin, and a load cooling process to reduce wrinkling.

NOTE: For the best energy performance, use the Normal/Casual Cycle.

As with any new product, you will hear sounds that you are not accustomed to. You may hear various sounds when the door is

locked and unlocked, and during the washing, rinsing, and spinning process. Between changes in wash actions, there will be momentary pauses. You will hear water spraying and splashing during the wash and rinse cycles. These new sounds and pauses are part of normal washer operation.

You can customize your wash by adding options to your cycle selections. You can add or change an option after starting a cycle anytime before the selected option begins. Not all options are available with all cycles. Available options will glow amber. Current selections will glow green. If an option is unavailable with a selected cycle, the light will not illuminate.

CUSTOM CYCLE OPTIONS

2nd Rinse

Extended

Prewash O Spin

S°ak O Delay

O R Loud

Button

Sounds

Start

O I Cycle SignalHOLD TO LaCK /

[] Soft

joff

o©

UNLOCK CONTRO S

1. Add detergent only to the Main Wash compartment of the dispenser drawer.

2. Press the SOAK button.

3. Choose the desired soak temperature.

4. Select and hold START (approximately 1 second).

2nd Rinse

A second rinse can be used to aid in the removal of detergent or bleach residue from garments. This option provides an additional rinse with the same water temperature as the Normal rinse. This is the default rinse setting for the Whitest Whites cycle.

Extended Spin

Use this option to add an additional spin to any cycle to improve drying times for some heavy fabrics or special-care items by

reducing excess water, which may save energy.

• See the "Laundry Guide" for an overview of possible options for each Wash Cycle selection.

• You can select more than one option for a custom cycle. Some options cannot be added to some cycles. For example, Soak cannot be added to the Quick Wash cycle.

• If an option is unavailable with a selected cycle, there will be 3 short tones, and the light for that option will not glow when

selected.

Custom Cycle

Custom cycle allows you to store a customized wash cycle for future us.

To Customize a Wash Cycle:

1. Select a cycle.

2. Select the desired OPTIONS.

3. Select the desired MODIFIERS.

4. To save the cycle, press and hold to set CUSTOM CYCLE (approximately 3 seconds) until a beep sounds and the letters "SET" are displayed on your machine.

5. Press START.

6. To reuse this cycle at another time, select CUSTOM CYCLE and press START.

Prewash

Use this option for loads of heavily soiled items that need pretreatment. This option adds 20-minutes prewash without drain to main wash cycle.

Add detergent to the Main Wash compartment of the Dispenser Drawer.

NOTE: The Prewash option cannot be selected with the Soak, Quick Wash, Handwash/Delicate, or Rinse/Drain & Spin.

Soak

Use the Soak cycle to help remove small spots of set-in stains on fabrics. This cycle provides a soak time with warm or cold water followed by drain. Extra water, a short tumbling phase for equal distribution of the laundry, and a soaking time without drum movement improve the removal of set-in stains. Drain without spin assures gentle treatment, even for delicate articles.

Using the Soak Cycle: The soak cycle provides a soak time with warm or cold water followed by drain.

Delay Start

To begin the wash cycle later, select DELAY START until the desired delay time (in hours) shows in the Estimated Time Remaining display, and then select START.The countdown to the

wash cycle will show in the display window, and the button indicator will blink until the cycle begins.

IMPORTANT: When delaying a cycle, use only powdered detergents in the main wash compartment since liquid detergents may seep out of the compartment during Delay Start, before the wash cycle begins.

Cycle Signal

This signal is helpful when you are removing items from the washer as soon as it stops. Press CYCLE SIGNAL to select Loud, Soft, or Off.

Button Sounds

Button sounds are used to notify you of what has been selected or to let you know when something is not available. Press BUTTON SOUNDS to select Loud, Soft, or Off.

Preset cycle settings of Wash Temp, Spin Speed, and Soil Level can be changed. You can change a modifier after starting a cycle anytime before the selected modifier begins. Not all modifiers are available with all cycles and options. Available options will glow amber. Current selections will glow green. If a modifier is unavailable with a selected cycle, the light will not illuminate.

NOTE: The panel shown below may be different from that of your model.

MODIFIERS I Extra Hot I High

R Heaw Warm* [] Normal Warm [] Extra Low

J Light JCoid J No Spin

Control i [] []Low

O O O

Soil Level Wash Temp Spin Speed

• To change the water temperature, select the WASH TEMP button until the desired setting glows green.

• To change the spin speed, select the SPIN SPEED button until the desired setting glows green.

" WARM RINSE S LECIION

+ 33 hidden pages