For the latest information about this product (system requirements, compatibility information, etc.), product registration, and translations of this guide
in Spanish, French, Italian, and German, visit alesis.com.
For additional product support, visit alesis.com/support.
Setup
Connection Diagram
Items not listed in Introduction > Box Contents are sold separately.
Note: Make sure to unplug/remove headphones before moving away from the keyboard.
2
Power
Computer
SD Card
Smartphone
Headphones
Sustain Pedal
Microphone
Page 3
Features
Top Panel
1. Power On/Off: Press this button to turn the keyboard on or off.
2. Master Volume: Turn this knob to adjust the Master Volume.
3. Mute: Press this button to mute the Master Volume.
4. Tempo: Press the Tempo buttons [<] or [>] to increase or decrease the speed of the accompaniment, demo song and/or
metronome. Press the [<] and [>] buttons simultaneously to reset to the default value.
5. Touch Pad: Touch the Touch Pad and move your finger along the X- and Y-axis to control the selected effect. Use the Effect
button to change the parameters controlled by the Touch Pad.
6. Effect: Press this button to select a group of parameters, and then use the Touch Pad to control the selected parameters in real
time. See Operation > Touch Pad for a list of selectable parameters.
7. LCD: This screen shows settings information and displays the notes you play in real time.
8. Built-in Microphone: Use this microphone torecord your own sounds when the Sampler is engaged. See Operation > Using the
Sampler for more information.
9. Data Dial: Turn this dial to select a value or adjust a parameter.
10. [<] / [>] / Numeric Buttons: Press the left or right directional buttons to select a value or set a parameter. You can also use the
numeric buttons to enter a value. Press both directional buttons at the same time to reset current parameter to its default setting.
11. Sound: Press this button to enter Sound mode and select a sound for the keyboard. See Operation > Playing a Sound for more
information and Appendix > Sound List for a full list of instruments.
12. Style:Press this button to enter Style mode and choose an accompaniment rhythm style. See Appendix > Style List for a full list of
playable styles.
13. Song: Press this button to enter Song mode and play stored songs. See Appendix > Song List for a full list of playable songs.
14. Lesson: Press this button to select and play a Lesson.When song playback is stopped, press this button to enter or exit Lesson
mode. Press Lesson and Song buttons at the same time to select a hand-part to practice: L → R → L+R. See Operation > Using
Lesson Mode for more information.
15. Mix: Press this button to enter Mix mode and adjust accompaniment instrument levels. Press Mix and Record buttons at the same
time to engage the sampler. See Operation > Using the Mixer to learn more and Appendix > Mix Pattern List for a full list of mix
patterns.
16. Record: Press this button to record a custom song. See Operation > Recording for more detailed instructions.
17. Piano: Press this button to turn Piano Mode on or off. Piano mode is a setting optimized for concert piano performances. See
Operation > Piano Mode for more information.
18. Sustain: Press this button to activate a sustain effect which simulates a sustain pedal when playing the keyboard. Press this button
again to disable the sustain effect. Press the Sustain and Harmonybuttons at the same time to turn the Arpeggiator on or off. See
Operation > Performance Enhancement for more information about using the Arpeggiator.
19. Harmony:Press this button to turn the harmony function on or off. The Harmony function can be set to play a specific interval above
each note you play. See Operation > Performance Enhancement for more information.
3
Page 4
20. Split: Press this button to split the keyboard into two different sounds. The sound that you were using before pressing the Split
button will be applied to the left-hand side of the keyboard. To select a sound for the right-hand side, enter a number for the sound
or use the + and – buttons. Press the Split button again to disable the keyboard split. Press Split and Layer buttons at the same time
to turn Twinova function on or off. See Operation > Twinova for more information.
21. Layer: Press this button to layer two sounds together. The sound that you were using before pressing the Layer button will be used
for one part of the layer. To select the other sound for the layer, enter a number for the sound or use the [<] and [>] buttons. Press
the Layer button again to disable the layer function.
22. Chord Mode: Press this button to enter Chord mode and select how you play chords on the keyboard. See Operation > Chord
Mode for more information.
23. Fade: Press this button to fade an accompaniment track in or out.
24. Intro/Ending: Press this button to play an intro and then start playback of an accompaniment rhythm. Press this button while the
accompaniment rhythm is playing to play an outro and then stop playback of an accompaniment rhythm.
25. Fill A: Press this button to have the first of two types of temporary rhythm play during the accompaniment rhythm.
26. Fill B: Press this button to have the second of two types of temporary rhythm play during the accompaniment rhythm.
27. Sync Start: Press the Sync button, and then play the keys in the lowest two octaves (corresponding to the chords/notes). The playalong feature will start immediately when playing a key, instead of having to press the Start/Stop button to start it.
28. Start/Stop: Press this button to start or stop playing a style, song, or mix pattern.
29. Store: Press and hold this button, then press one of the Memory buttons M1 – M4 to save the current panel settings.
30. Bank: Press this button to enter Memory Mode and select a memory bank. See Operation > Performance Memory for more details.
31. M1 - M4:Press one of these buttons while in Memory Mode to store or recall panel settings.See Operation > Performance
Memory for more details.
32. Quick Setting [Q.S.]: Press this button to turn the Quick Setting function on or off. See Operation > Quick Setting for more
information.
33. Chord Ref.: Press this button to turn the chord reference function on or off. This function allows you to view a dictionary of chord
diagrams on the LCD screen. See Operation > Chord Reference for more information.
34. SD Card: Press this button toenter the SD card menu.See Operation > Connecting an SD Card for more information.
35. Mixer: Press this button to enter the Mixer menu. See Operation > Playing Mixes for more information.
36. Metro: Press this button to start the metronome. Press this button again to change the time signature of this button or turn off the
metronome. See Operation > Using the Metronome for more information.
37. Demo: Press this button to begin playback of the demonstration songs. Use the number buttons or [<] / [>] buttons to select another
demonstration song. Press this button again to stop the playback.
38. Function: Press this button to enter the function menu.See Operation > Using the Function Menu for more information.
Pitch Bend Wheel:Roll this wheel up or down to apply a pitch-bending effect to the notes you play.
39.
4
Page 5
Rear Panel
1. SD Card port: Insert an SD Card containing MIDI or WAV music files here.
2. USB Port: Insert a USB-B cable here to connect the USB-A keyboard to a computer or a mobile device.
Note: The Harmony 61 Pro features a class compliant plug-and-play connection, and this USB port enables sending and receiving
MIDI data, as well as sending and receiving audio between the Harmony 61 Pro and a connected computer. To use these features,
simply connect the Harmony 61 Pro to your computer and select it for use in your software or system preferences.
3. Sustain Input: Connect a sustain pedal with a 1/4” (6.35 mm) cable here.
4. Phones Output: Plug a pair of headphones into the 1/4” (6.35 mm) output here.
5. Aux Input: Connect an external audio source, such as an MP3 or CD player, using a 1/8” (3.5mm) cable here.
6. MIC Input: Connect a microphone with a 1/4” (6.35 mm) cable to the input here to sing along with the keyboard output.
7. Power Input: Plug in the included power adapter here.
Bottom Panel (Not shown)
1. Battery Compartment: Install 6 “AA” batteries here to power the keyboard if you are not using the power adapter.
Operation
Playing a Sound
1. Press the Sound button to enter Sound mode. The “R1” indicator will light up. The LCD will show the current Sound name and
number.
2. Use the data dial or [<] / [>] buttons to select a sound. Alternatively, use the numeric buttons to enter a preset sound number. See
Appendix > Sound List for a full list of sounds.
3. Play the keyboard to use this Sound for performance.
Using Layer Mode:
1. Press the Layer button to enter Layer mode. The “R2” indicator will light up. The LCD will show the current layer sound name and
number.
2. Use the data dial or [<] / [>] buttons to select a layer sound. Alternatively, use the numeric buttons to enter a preset sound number.
3. Play the keyboard. You will hear two different sounds playing together.
4. In Layer mode, press the Layer button to exit this mode.
Using Split Mode:
1. Press the Split button to enter Split mode. The “L” indicator will light up. The LCD shows the current split sound name and number.
The default split point is F#3 (19). You can change the split point in the function menu.
2. Use the data dial or [<] / [>] buttons to select a split sound. Alternatively, use the numeric buttons to enter a preset sound number.
3. Play the keyboard. You will hear different sounds from the left- and right-hand sections.
4. In Split mode, press the Split button to exit this mode.
Note: When layer and split sounds are in use, only the right-hand area plays the layered sound. Use the mixer to adjust the volume of
each part.
5
Page 6
X
Touch Pad
The Touch Pad controls vibrato depth and speed by default when no effect LED is lit.
Press the Effect button repeatedly to cycle through different sets of effects. When you select one from the 2-5 sets, the corresponding
effect LED will turn on.
After selecting a set of effects, use the Touch pad to control these effects in real time.
-axis Target Y-axis Target
#
1 Vibrato Speed Vibrato Depth
2 LPF Global Resonance (LPF)Global
3 HPF Global Resonance (HPF) Global
4 Reverb Global Delay Channel
5 Release Channel Sidechain Comp Channel
Piano Mode
Press the Piano button to enter or exit Piano Mode.
In Piano Mode, all parameters become optimized for concert piano performance. You can start style playback, but it will play the rhythm
track only.
Notes: When in Piano Mode is engaged, the Fingered function will be automatically turned off. In Piano Mode, the Layer and Split
functions will not be available.
Twinova
The Twinova function splits the keyboard into two areas with the same sound and octave range, for the convenience of playing together
with a friend or instructor.
Press the Split and Layer buttons at the same time to turn Twinova on or off. The default split point is E4 and F4.
To change the Twinova octave:
1. Press the Function button to enter the function menu.
2. Use the data dial to select “TwinoOct”.
3. Use the [<] / [>] buttons to change the octave setting.
Pressing both [<] and [>] buttons at the same time will reset to the default octave setting.
Note: The Twinova mode and the split / layer functions cannot be used at the same time.
Using the Metronome
To turn the metronome on or off:
1. Press the Metro button to turn on the metronome. The beat indicators on LCD will blink and you will hear the metronome sound.
2. Press this button again to turn off the metronome.
The default metronome beat is 4; this can be changed in the Function menu.
To change the metronome beat:
1. Press the Function button, then use the data dial to select “Beat”.
2. Use the [<] / [>] buttons to change the beat setting. The setting range is 0, 2 ~ 9.
Notes:
1. If you turn on the metronome during style playback, the metronome sound will start from the next beat. Its time signature and tempo
will be reset to match the selected style.
2. If you turn on the metronome during MIDI recording, the metronome sound will not be recorded. But if you turn on the metronome in
Audio recording, the metronome sound will be recorded
6
Page 7
Performance Enhancement
Arpeggiator:
Press the Sustain and Harmony buttons at the same time to turn on the arpeggiator. The “ARP.” indicator lights up on LCD. Repeat this
operation to turn off the arpeggiator.
Arpeggiator split point:
When the arpeggiator is in use, the keyboard will be split into two sections. You can play chords with the left-hand side and play melody
with the right-hand side. The default split point is F#3 (19) (same as the split point in Split mode). You can change the split point in the
Function menu.
Harmony:
Press the Harmony button to turn this function on or off.
When harmony is in use, the “HARMONY” indicator will light up on the LCD. Turn on the Fingered function, then play a chord in the chord
section. When you play in the right-hand section, it will add a harmony effect to the notes.
Setting the harmony type:
Press the Function button to enter the function menu. Use the data dial to select “HrmXXXX”, then use the [<] / [>] buttons to change
the harmony type. Pressing [<] and [>] buttons at the same time will reset to the default setting.
Note: Harmony types “1+5” and “octave” are always available, but the rest will not work until you turn on the Fingered function and then
play a chord in the chord section.
Playing a Style
1. Press the Style button to enter Style mode. The LCD will show the current style name and number.
2. Use the data dial or [<] / [>] buttons to select a style. Or use the numeric buttons to enter a preset style number. Please see
Appendix > Style List for a full list of playable styles.
3. Press the Chord Mode button to select Fingered mode or Full Range mode.
4. Press the Start/Stop button to start the rhythm track. Alternatively, press the Sync Start button to engage sync start function, then
play a key on keyboard to start the rhythm track.
To fade a style in or out:
1. When style is stopped, press the Fade button to turn on the fade-in function. The “FADE” indicator will light up on the LCD. When
the style starts playing, the volume will increase from low to high.
2. During style playback, press the Fade button to turn on the fade-out function. The volume will decrease from high to low until the
style is stopped.
The default fade-in / fade-out time setting is 10 seconds. You can change this time setting in the function menu.
To set the tempo:
1. Press the [Tempo </>] buttons to edit the tempo value.
2. When the tempo value is blinking on the LCD, use the [Tempo </>] buttons, [<] / [>] buttons or the data dial to change the tempo
value.
3. Press [Tempo <] and [Tempo >] at the same time to reset to the default tempo.
Note: When style playback is stopped, changing the style will automatically reset the tempo. However, changing the style during style
playback will not result in tempo change.
Playing Songs
1. Press the Song button to enter Song mode. LCD shows the current song name and number.
2. Use the data dial or [<] / [>] buttons to select a song. Or use the numeric buttons to enter a song number. Please see Appendix >
Song List for a full list of playable songs.
3. Press the Start/Stop button to start playing the song.
4. During song playback, press the Start/Stop button to stop. When playback is stopped, press the Style and Record buttons to exit
this mode.
7
Page 8
Notes:
1. While Song Mode is enabled, you cannot access the Memory Buttons, Quick Settings, Function Menu, Twinova, Record, or Chord
Mode features. To regain access to these features, exit Song mode by the pressing Piano, Style, or Mix buttons.
2. By default, all songs will loop in order. You can change the playback mode in the function menu.
Controlling Song Playback:
Before the Intro section begins, the measure will start counting down from 4. When the measure goes to “1”, the melody will start playing.
You can use the group of buttons lettered A – E(Chord Mode, Fade, Intro/Ending, Fill A, Fill B) to control the playback. Their playback
functions are indicated underneath the letters.
During playback:
• Press the A button to loop the selected song.
• Press the B button to loop all of the songs in order.
• Press the C button to rewind the song.
• Press the D button to fast forward the song.
• Press the E button to pause song playback.
Adjusting the Song volume:
You can adjust the song playback volume in the mixer menu. Press the Mixer button to enter the Mixer menu. Use the data dial to select
“MusicVol”, then use the [<] / [>] buttons to change the volume setting. Pressing [<] and [>] buttons at the same time will reset to the
default volume.
Chord Mode
Entering Chord Mode:
Press the Chord Mode button to enter Chord mode. Press the button repeatedly to cycle between FINGERED, FULL RANG, and OFF.
•In Fingered mode, the keyboard is divided into two sections. The chord section is in the left-hand area. You can play Single Finger
and Multi Finger chords in the chord section.
•In Full Range mode, the entire keyboard is the chord section. Only Multi-finger chords will be detected in the chord section.
Playing in Chord Mode:
1. Press the Sync Start button to engage the sync start function.
2. Play a chord in the chord section, and it will start playing auto accompaniment of all tracks. Alternatively, press the Start/Stop button
to start percussion playback, and then play a chord in the chord section to start playing all tracks.
Single Finger:
Single-finger makes it easy to produce major, seventh, minor and minor seventh chords by pressing a minimum number of keys on the
auto accompaniment section.
Multi-finger:
Multi-finger allows you to play chords in normal fingering.
Full Range:
In Full Range mode, it detects chords played in normal fingering (Multi-finger) over the entire keyboard range.
8
Page 9
Quick Setting
1. Press the Q.S. button to turn on the Quick Setting function. The “Q.S.” indicator will light up on the LCD. The Fingered function will
be turned on automatically.
2. Press one of the M1 - M4 buttons to recall panel settings (including sound and effects) that match the current style. Each style has 4
preset Q.S. settings.
Note: Memory function is not available when Q.S. is in use.
DSP Effects (Reverb/Chorus)
Digital Signal Processing is turned on by default. The “DSP” indicator will light up on the LCD.
To change the DSP setting:
1. Press the Function button to enter the function menu.
2. Use the data dial to select “DSP”. The LCD will temporarily show “DSP ON”.
3. Use the [<] / [>] buttons to turn the DSP on or off.
4. Pressing [<] and [>] buttons at the same time will reset to the default setting.
Note: There may be a slight pause in the sound if you switch the DSP effect on/off while style or song is playing.
Using Lesson Mode
The Lesson, and L/R buttons are available only when song playback is stopped.
Lesson 1:
In Lesson 1, you will learn to play at the correct timing. As long as you play a key at the right time, the correct note will sound.
1. When song playback is stopped, press the Lesson button to enter Lesson 1. The “LESSON 1” indicator will light up.
2. Repeatedly press the Song and Lesson buttons to select to practice the L hand part, R hand part or both parts.
3. Press the Start/Stop button to start the lesson. Your performance will be evaluated when the lesson is finished. No score will be
given if you stop halfway.
Lesson 2:
In Lesson 2, you will learn to play the correct notes. If you play a wrong note, the lesson will stop and wait until you correctly play the note
displayed on the LCD.
1. When song playback is stopped, press the Lesson button twice to enter Lesson 2. The “LESSON 2” indicator will light up.
2. Repeatedly press the Song and Lesson buttons to select to practice the L hand part, R hand part or both parts.
3. Press the Start/Stop button to start the lesson.
Your performance will be evaluated when the lesson is finished.
Note: In Lesson 2, notes will not sound until they are played correctly on the keyboard.
Lesson 3:
In Lesson 3, you will learn to play the correct notes with the correct timing.
1. When song playback is stopped, press the Lesson button three times to enter Lesson 3. The “LESSON 3” indicator will light up.
2. Repeatedly press the Song and Lesson buttons to select to practice the L hand part, R hand part or both parts.
3. Press the Start/Stop button to start the lesson.
Your performance will be evaluated when the lesson is finished.
Note: In Lesson 3, all notes you play will sound. However, if no keys are played on the keyboard, only the accompaniment will be played
back.
9
Page 10
A
A
Playing Mixes
Mix mode consists of Patterns, Sections and Tracks. A pattern is a song structure that includes 5 sections. There are 6 separate
instrument tracks in each section that you can turn on or off.
1. Press the Mix button to enter Mix mode. The LCD will show the current Mix pattern name and number. The Sync Start function will
be engaged.
2. Press the Start/Stop button or press any key in the chord section on the left-hand side. The Mix Pattern will immediately start
playing. Use the [<] / [>] buttons to change the Mix Pattern.
3. During Mix playback, press the Start/Stop button to stop. When playback is stopped, press
the Style and Song buttons to exit this mode.
Mix Sections:
1. During Mix playback, press the A - E buttons to shift between these sections. The LCD indicators will show the currently selected
section.
2. During Mix playback, if you press and hold the button of the currently selected Section, it will apply a slicer effect to this Section.
3. Harmony 61 Pro provides two kinds of slicers, selectable from the function menu.
Mix Tracks:
During Mix playback, you can press the track buttons T1 – T6 (Chord Ref., SD Card, Mixer, Metro, Demo, and Function) to mute the
corresponding instrument track. Press the same button again to unmute the corresponding track. The Track on/off information is
displayed on LCD.
• Pressing the T1 (Chord Ref.) button during playback will mute the Kick drum track.
• Pressing the T2 (SD Card) button during playback will mute the Snare drum track.
• Pressing the T3 (Mixer) button during playback will mute the whole drums track.
• Pressing the T4 (Metro) button during playback will mute the Bass track.
• Pressing the T5 (Demo) button during playback will mute the Synth 1 track.
• Pressing the T6 (Function) button during playback will mute the Synth 2 track.
In Mix mode, you can press the MIX CTRL. button to shift the track buttons back to their primary functions (the names printed above
these buttons). The “MIX CTRL” indicator will turn off. You can also press the Q.S. button to switch between the primary and secondary
functions of the track buttons.
Chord Reference
1. Press the CHORD REF. button to turn on this function. The LCD will show “ChordRef”. The Fingered function will be automatically
turned on.
2. Use the keys C4~B5 to assign the chord type. Use the keys C6~B6 to assign the chord root. When the chord type and chord root are
assigned, the LCD will show the chord name and chord notes. Try to play this chord in the chord section.
Detailed chord types in the Chord Reference:
Note Chord Note Chord Note Chord
C6 C C4 M C5 7(b9)
C#6 C#/Db C#4 M(9) C#5 7(9)
D6 D D4 6 D5 7(#9)
Eb6 Eb/D# Eb4 mM7 Eb5 7(b13)
E6 E E4 M7 E5 7(13)
F6 F F4 M F5 7(#11)
F#6 F#/Gb F#4 M(9) F#5 dim7
G6 G G4 M6 G5 dim
b6
b/G# Ab4 M7(9) Ab5 7aug
A6 A A4 M7 A5 aug
Bb6 Bb/A# Bb4 M7b5 Bb5 7sus4
B6 B B4 7 B5 sus4
10
Page 11
Recording
MIDI Recording:
In MIDI recording, you can save your recording as a User Song on the instrument or export it to a connected SD card. The saved user
songs will not be lost when you turn off the power. When there is no SD card connected, the unit will automatically switch the record
function to MIDI.
Note: You can only record audio to an SD Card. If you want to record a User Song, but then save it to an SD card at a later date, it will be
saved as a MIDI file, not an Audio file.
To prepare and start recording:
1. Press the Record button to enter the user song menu. The LCD will show the current user song number, such as “001 RecSong”. If
there is no user song, the LCD will show “No File!”. Use the data dial or the [<] / [>] buttons to select a user song to save your
recording.
2. Press the Record button again to engage the recorder. The “REC” indicator will light up. The beats indicators on the LCD will start
blinking. You can then select the desired sound, style, tempo, etc.
3. Press the Start/Stop button or simply play the keyboard to start recording. Alternatively, turn on the Fingered function. Recording
will start when you play a chord in the chord section.
To stop recording:
During recording, press the Record button. It will stop recording and save the recorded song automatically. If the storage becomes used
up during recording, recording will stop and be saved automatically. If you are recording with accompaniment, recording will stop when
the ending section is finished.
Note: If the selected user song has data, the previous data will be overwritten by new recording.
To play back recording:
1. After recording, the recorded song will be automatically selected. Alternatively, press Song to enter the Song interface, then use data
dial or [<] / [>] buttons to select a user song.
2. Press the Start/Stop button to start the playback.
To delete recordings:
Hold down the Record and Song buttons at the same time, then turn on the power. This operation will delete all user songs. Alternatively,
hold down the [<] and [>] buttons at the same time, then turn on the power. This operation will delete all user data on the instrument.
Audio Recording:
In audio recording, you can save your recording as a WAV file to the connected SD card. When an SD card is connected, the unit will
automatically switch the record function to Audio.
1. Connect an SD card to the SD card port on the Rear Panel of the instrument. The SD card indicator will light up on the LCD screen
when it is recognized. This instrument will automatically engage audio recording and will save the recorded song to the root directory
of the connected SD card. You can then select the desired panel settings and be prepared for the recording.
2. Press the Record button to start recording. The LCD will temporarily read “RECSTART”. This button LED and the “AUDIO REC”
indicator will light up. All the sounds that you hear from the instrument will be recorded, such as accompaniment, keyboard sounds,
song playback, demo playback, music from Aux In, vocal singing from the connected microphone, etc.
3. To stop recording, press the Record button. The button LED and “AUDIO REC” indicator will turn off. The recorded song will be
saved in the SD card with the name “Audio xxx.wav”. The LCD will then automatically show the name of the recorded song.
4. Press the Start/Stop button to play back this recorded song. Alternatively, you can choose to play back the recorded song from the
SD card play menu. See Operation > Connecting an SD Card for details.
Note: Do not remove the SD card or turn off the power when song saving is in progress, otherwise, it may cause damage to the audio
files and the SD card.
11
Page 12
Connecting an SD Card
The Harmony 61 Pro recognizes SD cards in FAT32 format. It does not support multi-partitioned SD cards. We recommend formatting the
SD card on the instrument before using. Do not edit the backup files saved on the SD card from the instrument.
Note: An SD card in FAT32 format supports up to 512 files under its root directory. Exceeding this limit will make it unable to save or
record to the SD cards.
Basic Operations:
1. When the connected SD card is successfully recognized, the SD card indicator will light up on the LCD. Then, press the SD Card
button to enter the play menu. If the connected SD card is not yet recognized, the LCD will show “WAIT...!”. If the SD card
recognition fails, the LCD will show “DiskErr!”. If no SD card is inserted, the LCD will show “NoDisk!”, then return to the previous
screen.
2. While in the play menu, you can use the data dial to select the other menus: “Save”, “Load” and “Format”. Then, press [>] to proceed
or press [<] to go back.
3. When playing back a MIDI file, you can adjust the playback volume by editing the “MusicVol” parameter in the Mixer menu.
4. Press the SD Card / Song / Style buttons to exit this mode.
Playing back files saved on an SD Card:
1. Press the SD Card button to enter SD card mode, then use the data dial to select “Play”.
2. Press the [>] button, and it will show all the MIDI and WAV files under the root directory of the SD card.
3. Use the data dial to select a file.
4. Press the Start/Stop button to start or stop the playback.
Note: This function supports playing back MIDI and WAV files only.
Loading files from the SD Card:
1. Press the SD Card button to enter SD card mode, then use the data dial to select “Load”.
2. Press the [>] button to view all the MIDI files under the root directory of the SD card.
3. Use the data dial to select a file and press [>] button to confirm. Then, the LCD will show a user song name “xxxx RecSong” or “xxxx
No Flile!”.
4. Use the data dial to select a user song slot, then press [>] button to execute loading.
Notes:
1. If the selected user song slot is blank, when the loading process is finished, the LCD will show this user song name.
2. If the selected user song slot has data (occupied), the LCD will prompt you with “Sure?”, indicating that this loading operation will
overwrite the existing data. You can then press the [>] button to execute loading. The data that has been overwritten cannot be
recovered. Alternatively, you can press [<] to cancel loading.
Saving files to the SD Card:
1. Press the SD Card button to enter SD card mode, then use the data dial to select “Save”.
2. Press the [>] button, to save all the user songs from the instrument to the SD card with the name “UserSong00X_NUB.mid”. If the
user song has no data, the LCD will prompt “No File!”.
3. When the saving process is finished, the LCD will temporarily show “save ok!”, then return to show the root directory of the SD
card.
4. The file names “UserSong00X_NUB.mid” and “UserSong00X” are the user song name and number, corresponding to the user songs
on the instrument. “NUB” is the file number of the saved song (001~512).
Formatting the SD Card:
1. Press the SDCard button to enter SD card mode, then use the data dial to select “Format”.
2. Press the [>] button, and the LCD will prompt you with “Sure?” indicating it will format this SD card.
3. Press the [>] button again to confirm formatting, or press [<] to cancel formatting.
Note: This operation will delete all data on the SD card. This data cannot be recovered after formatting. Do not remove the SD card or
turn off the power during the formatting progress, otherwise, it may cause damage to the SD card.
12
Page 13
Performance Memory
Note: Hold down both the Store and M1 buttons, then turn on the power. This operation will reset the performance memory to factory
default setting.
To save the panel settings:
Hold down the Store button, then press one of the M1 - M4 buttons to save the current panel settings to that memory.
Note: This operation will overwrite the previous data.
To recall a panel setting:
Press one of the M1 - M4 buttons. This will recall the settings saved in that memory and reset the related parameters on the control
panel.
Note: Performance memory cannot be recalled when Q.S. function is in use.
To select a memory bank:
1. Press the Bank button. The LCD will show the current bank number.
2. Press this button repeatedly to select a desired bank number.
Using The Sampler
The Harmony 61 Pro allows you to record your own sounds using the built-in microphone located above the LCD and then play them
using the keyboard. Each sample can contain up to 2 seconds of audio. User Samples will be stored at the end of the sound library.
Recording a user sample:
1. Press the Mix and Record buttons simultaneously to enter Sampler mode. The Sampler will then enter a standby mode, the LCD will
read “Standby,” and the center LED light will flash.
2. Now, use the data dial to select a slot in which to save the sample.
3. Once you have selected a slot, sample recording will be triggered by the sound itself. When the sound volume reaches the trigger
level, sampling will start automatically, and the LCD will read “Sampling”. When the sound volume drops beneath the trigger level or
when the recording time reaches 2 seconds, the Sampler will stop automatically and save the sound; the LCD will read “Finished”.
4. The pitch correction function is turned on by default. The sampled pitch will be automatically recognized and corrected to the nearest
key. When pitch correction is turned off, the sampled pitch will be corrected and set as C4. You can turn this function on or off in the
Function Menu. See Using the Function Menu to learn more.
Note: The next available empty slot will be selected automatically before the next sample recording begins. For example, if the first slot
has data, the second slot will be automatically selected. If all slots are used up, then the first slot will be selected. Please note that when
sampling again on the slot with data, the original data will be overwritten.
Playing a user sample:
1. After sampling is complete, the unit will return to Sound mode automatically. LCD will display the sample you’ve just recorded as a
sound named with the slot number, such as “User01”.
2. Play the keyboard to use this sample for performance.
3. Use the numeric buttons, the [<] / [>] buttons or the data dial to select other saved samples.
4. Use the Touch Pad to play your sample with effects.
Deleting a user sample:
Hold down the [<] and [>] buttons, then turn the power off. All user data will be deleted.
Using the Mixer
1. Press the Mixer button to enter the mixer menu. The instrument will automatically show the mixer parameters that are available for
the current mode. For example, when in Song mode, if you enter the mixer menu, it will show “MusicVol” on top of the menu.
2. Use the data dial to select the parameters in the mixer menu.
3. Use the [<] / [>] buttons to change the volume setting of the selected parameter.
4. Pressing [<] and [>] buttons at the same time will reset to the default volume setting. If the current volume setting is the same as the
default setting, pressing the [<] and [>] buttons will mute/unmute the selected parameter.
13
Page 14
Notes:
1. The available mixer parameters may vary when in different modes.
2. The mixer menu will close automatically if there is no operation in 3 seconds.
Select the reverb type of the instrument.
Room1, Room2, Room3, Hall1, Hall2, Hall3,
Church1, Church2, Garage1, Garage2
Select the chorus type of the instrument.
Duet 1, Duet 2, Trio 1, Trio 2, Flanger1, Flanger2,
GM Rotary Speaker1, GM Rotary Speaker2
Select the harmony type of the instrument.
Duet, Trio, 1+5, Octave, CtryDuet, Block,
4Close1, 4Close2, 4Open
Turn the scale tuning on or off.
Select the scale type of the instrument.
Pythagorean, Just Major, Just Minor, Meantone,
Werckmeister, Kirnberger
Specify the scale root note when scale tuning is
turned on.
C, C#, D, D#, E, F, F#, G, G#, A, A#, B
Specify the MIDI In channel.
Specify the MIDI Out channel.
Select the format of recording files.
MIDI, WAV
15
Page 16
20 Twinova Octave xxx TwinoOct -2~+2 (default:0)
21 Fade Time xxx FadeTime 1 ~ 20 (default:10) Specify the time period of fade-in and fade-out in
style playback.
22 DSP xxx DSP OFF, ON (default:ON) Turn the DSP effect on or off.
23 Slicer Type xxx Slicer 1 ~ 2 (default:1) Specify the Slicer effect applied to the sections in
Mix playback.
24 Touch Pad
Control
25 Song Loop xxx SongLoop 001,ALL,OFF
26 Sampler Pitch
Correction
27 Power Off Time xxx PowerOff OFF, 030, 060
xxx Pad ****
xxx Pitch Co OFF, ON (default:ON) Turn the sampler’s pitch correction on or off.
1 Pad Rele
2 Pad Hold (default:001 Pad
Rele)
(default:ALL)
(default:30)
Release: Effects will be reset to default when the
finger is released from the Touch pad.
Hold: Effects will be held after the finger is
released from the Touch pad.
Specify how the songs will be played back.
001,ALL,OFF
The instrument will automatically shut down after
30 minutes of inactivity; you can disable this
function or change the time setting.
Troubleshooting
The speakers produce a pop sound whenever the power is turned on or off. This is normal and is no cause for alarm.
Speakers do not produce sound when the keyboard is played:
1. Check if the master volume is set too low.
2. Check if the R1/R2/L sound volume is set too low in the mixer menu.
3. Check if headphones are plugged into the PHONES output.
The speakers produce noise when a mobile phone is put near them. Using a mobile phone in close proximity to the instrument may
cause interference. To prevent this, turn off the mobile phone or use it farther away from the instrument.
The auto accompaniment does not play back even when Sync is in standby and a key is pressed. You may be playing keys in the
right-hand range of the keyboard. To start the accompaniment with Sync Start, make sure to play keys in the left-hand range.
Certain notes seem to be in the wrong pitch. Make sure that the tune value is set to 0. Press and hold the [<] and [>] buttons and turn
on the power to restore factory settings.
When connecting to computer, the instrument cannot be recognized. Check if the USB cable is firmly connected. Try connecting
another USB port on the computer. This instrument is plug and play and should work without installing a driver.
The pedal does not respond. Check if the pedal cable is firmly connected.
It cannot read/save to the SD card. Make sure your SD card is in FAT32 format and not multi-partitioned.
It shuts down after a period of time. The auto power off function will turn off the instrument after a preset period of time when the
instrument is not in use. You can adjust the auto-off function in the function menu.
The Harmony function does not work. Harmony function is not available when Sound R1 is a drum kit.
Factory Reset
To perform a factory reset:
Hold down the [<] and [>] buttons at the same time, then turn on the power. It will reset to factory default settings, and delete all user data
on the instrument, including user songs, user memory and user sounds. The LCD will show “Loading!”. When factory reset is completed,
the instrument will start normally.
16
Page 17
Appendix
Specifications
Keys
LCD Screen with Notation
Pitch Bend Wheel
X-Y Touch FX Pad
Max Polyphony
Sounds
Songs
Accompaniment Styles
Mix Patterns
Reverb
Chorus
Metronome Range
Amplifier
Speakers
Power
Optional Battery Power
Dimensions: (LengthxWidthxHeight)
Weight
* Specifications are subject to change without notice.
SD CardSD Card input (128 GB max)
61 full-size keys with touch response
Yes
Yes
Yes
64
580 + 5 user samples (10 seconds in total)
177 + 5 user songs
180
30 x 5 variations
10 types
8 types
5-280 beats per minute
30W (15W x 2)
4.72” (12cm) x 2
1/4” (6.35mm) input
12V DC 3A, center-pin positive power adapter (included)
6 AA-size batteries (not included)
946mm x 360mm x 118mm
11.24 lbs (5.1kg)
Sound List
NO.English Name
PIANO
1Acoustic Grand Piano 1
2Acoustic Grand Piano 2
3Wide Grand Piano
4Dark Grand Piano
5Bright Acoustic Piano 1
6Bright Acoustic Piano 2
7Wide Bright Piano
8Electric Grand Piano
9Wide Grand Electric Piano
10Dark Electric Grand Piano
11Honky Tonk Piano
12Wide Honky Tonk Piano
13Dark Honky Tonk Piano
14Harpsichord
15Octave Mix Harpsichord
16Wide Harpsichord
17With Key Off Harpsichord
18Octave Grand Piano 1
19Octave Grand Piano 2
20Piano & Strings
21Piano & Pad
22Piano & Choir
23Piano & EP
24Piano & Vibraphone
25Detuned Electric Piano 1
26Detuned Electric Piano 2
27Electric Piano 1
28Electric Piano 2
29Electric Piano 3
30Electric Piano 4
31Mix Velocity Electric Piano 1
32Mix Velocity Electric Piano 2
3360's Electric Piano
34Legend EP
35Phase EP
36Clavi 1
37Clavi 2
38Phase Clavi
39Wah Clavi
40Pulse Clavi
41Wide Clavi
42Octave Clavi
43Funk EP
44Warm EP
45Choir EP
46Wah EP
47Modern EP
8560's Italian Organ
86Drawbar Organ 1
87Drawbar Organ 2
88Drawbar Organ 3
89Detuned Drawbar Organ
90Detuned Percussive Organ
91Percussive Organ 1
92Percussive Organ 2
93Dark Percussive Organ
94Rock Organ 1
95Rock Organ 2
96Dark Rock Organ
97Octave Rock Organ
98Detuned Rock Organ
99Church Organ 1
100Church Organ 2
101Octave Mix Church Organ
102Detuned Church Organ
103Reed Organ
104Octave Reed Organ
105Detuned Reed Organ
106Rotary Organ
107Puff Organ
SYN LEAD
265Square Lead 1
266Square Lead 2
267 Square Lead 3
268 Sawtooth Lead 1
19
Page 20
269 Sawtooth Lead 2
270 Sawtooth Lead 3
271 Sawtooth Lead 4
272 Saw + Pulse Lead
273 Double Sawtooth Lead
274 Sequenced Analog Lead 1
275 Sequenced Analog Lead 2
276 Wavy Sawtooth 1
277 Wavy Sawtooth 2
278 Calliope Lead
279 Chiff Lead 1
280 Chiff Lead 2
281 Charang Lead 1
282 Charang Lead 2
283 Wire Lead 1
284 Wire Lead 2
285 Voice Lead 1
286 Voice Lead 2
287 Fifths Lead 1
288 Fifths Lead 2
289 Bass Lead
290 Soft Wrl Lead
291 Massiness
292 Sine Lead
293 Slow Square Lead
294 Sine Solo
295 Thick Square
296 Two Oscillators Lead
297 Bauble Lead
298 Analog Lead
299 Big Lead
300 Fat Lead
301 4th PWM
302 Delayed Lead 1
303 Delayed Lead 2
304 Corrie
305 Quint
306 Inductive Lead
307 Move Up Lead
308 Synth Saw
309 Synth Distorted Lead
310 Synth Bandwidth Lead
311 Synth Dual Saw Lead
312 Synth Sync Lead
313 Decay Lead
314 Warm Square Lead
315 Funny Saw
316 Fargo Saw
317 Jump Lead
318 Short Lead
SYN PAD
319New Age Pad 1
320New Age Pad 2
321Warm Pad 1
322 Warm Pad 2
323 Warm Pad 3
324 Sine Pad
20
325 Poly Synth Pad 1
326 Poly Synth Pad 2
327 Choir Pad 1
328 Choir Pad 2
329 Itopia Pad
330 Bowed Pad 1
331 Bowed Pad 2
332 Metallic Pad 1
333 Metallic Pad 2
334 Halo Pad 1
335 Halo Pad 2
336 Sweep Pad 1
337 Sweep Pad 2
338 Pan Pad
339 Dipolar Pad
340 PWM Pad
341 Horn Pad
342 Click Pad
343 Analog Pad
344 80's Poly Pad
345 Soft 4th PWM
346 Soft Synth Calliope
347 5th Saw Wave
348 Soft 5th Lead
349 Slow Square
350 Space Voice
351 Rising
352 Congregate
353 Strong Detune Pad
354 Resonant Pad
355 Breath Pad
356 Fantasia Pad
357 EP Pad
358 New Age
359 Sine
SYN SFX
360Rain FX
361Sound Track FX
362Prelude
363Crystal FX
364Synth Mallet FX
365Atmosphere FX
366Warm Air
367Brightness FX
368Smog
369Goblins FX
370Choir Bell
371Echoes FX
372Echo Pan FX
373Echo Bell FX
374Sci-Fi FX
ETHNIC MISC
375 Sitar
376 Bend Sitar
377 Banjo
378 Shamisen
379 Koto
380 Taisho Koto
Page 21
381 Kalimba
382 Bag Pipe
383 Fiddle
384 Shanai
PERCUSSION
385Tinkle Bell
386Agogo
387Steel Drums
388Woodblock
389Castanets
390Taiko Drum
391Concert Bass Drum
392Acoustic Bass Drum
393Room Kick
394Power Kick
395Electric Bass Drum
396Analog Bass Drum
397Jazz Kick
398Side Stick
399Analog Rim Shot
400Acoustic Snare
401Room Snare
402Power Snare
403Electric Snare
404Analog Snare
405Jazz Snare
406Brush Tap
407Concert SD
408Hand Clap
409Tom
410Room Tom
411Power Tom
412Electric Tom
413Analog Tom
414Brush Tom
415Closed Hi-Hat
416Analog Closed Hi-Hat
417Pedal Hi-Hat
418Open Hi-Hat
419Crash Cymbal
420Analog Cymbal
421Ride Cymbal
422China Cymbal
423Ride Bell
424Tambourine
425Splash Cymbal
426Cowbell
427Analog Cowbell
428High Bongo
429 Low Bongo
430 Mute Hi Conga
431 Open Hi Conga
432 Low Conga
433 Analog Hi Conga
434 Analog Mid Conga
435 Analog Low Conga
436 High Timbale
437 Low Timbale
499Stereo Piano & Strings Pad
500Stereo Piano & Choir
501Stereo Piano & Synth Strings
502Stereo Piano & Warm Pad
503Stereo Piano & Soft EP
504FM Electric Piano
505Digital Piano
506E.Piano & Strings
507E.Piano & Acoustic Guitar
508E.Piano & Vibraphone
509E.Piano 2 & Pad
510E.Piano 2 & Strings
511Harpsichord & Stereo Strings
512Music Box & Stereo Strings
513Vibraphone & Stereo Strings
514Octave Vibraphone
515Chromatic Percussion Group
516Marimba & Kalimba
517Marimba Delay
518Octave Xylophone
519Organ & Stereo Strings
520Stereo Organ & Piano
521Rock Organ & Strings
522Church Organ & Choir
523Church Organ & Strings
524Acoustic Guitar & Flute
525Acoustic Guitar & Clavi
52624-Strings Guitar
527Steel Guitar & Warm Pad
528Stereo Strings & Horn
529Orchestra
530Full Strings
531Symphony
532Stereo Choir & Strings
533Stereo Choir & Steel Guitar
534Three Trumpets
535Trombone & Stereo Strings
536Three Trombones
537 Three Muted Trumpets
538 Club Brass
539 Brass & Woodwinds
540 Woodwinds & Strings
541 Small Woods Section
542 Pan Flute & Strings Pad
543 Koto & Shamisen
544 Flute & Clarinet
545 Flute & Oboe
546 Flute & Bassoon
547 Woodwinds Group 1
548 Woodwinds Group 2
549 Woodwinds Group 3
550 Woodwinds Group 4
551 Octave Flute
552 Flute & Octave Oboe
553 Flute & Octave Clarinet
554 Oboe & Bassoon
555 Oboe & Clarinet
556 Octave Oboe
557 Oboe & Octave Clarinet
558 Oboe & Octave Bassoon
559 Clarinet & Bassoon
560 Clarinet & Octave Oboe
CHINESE
561Zheng
562Re Wa Pu
563Er Hu
564Qu Di
565Hu Lu Si
566Suo Na
DRUMS
567Standard Set
568Room Set
569Power Set
570Electronic Set 1
571Electronic Set 2
572Analog Set 1
573Analog Set 2
574Jazz Set
575Brush Set
576Orchestral Set
577SFX Set
578House Set 1
579House Set 2
580Dance Set
22
Page 23
Style List
NO.English Name
8BEAT
18 Beat Guitar Pop
28Beat Piano
3 8Beat Ballad
48Beat 1
58Beat Hip Hop
68Beat Blues Rock
78Beat Pop
88 Beat Funk
9Rhythm&Beat 1
108Beat Disco
118Beat 2
12Sweet Beat
138Beat Dance
148Beat 3
15Rhythm&Beat 2
168Beat Rock
29Pop Rock
30Pop Dance 1
31Pop Fusion
32Analog Night 1
336/8 Pop
34Brit. Pop 1
35Brit. Pop 2
36Pop Hit
37Fusion Shuffle
38Analog Night 2
39Guitar Pop 2
40Soft Beat
4160's Pop
42R&B Ballad
43Piano Pop
44Soft Ballad
45Natural Ballad
46Love Ballad
47Easy Ballad
48Miami Folk
49Slow Ballad
50Folk Ballad
51Pop Ballad
52EP Ballad
53 New R&B Ballad
ROCK
54Rock
55New Wave
56Ska
57Slow Rock
5870's Rock&Roll
59Folk Rock
60Soft Rock
61Rock&Roll 1
62Rock Shuffle
63Rock&Roll 2
64Hard Rock
BALLROOM
65Tango
66Spain Matador
67Twist 1
68Twist 2
69Big Band Fox
70Slow Waltz 1
71Swing Fox
72Salsa 1
73Cha Cha
74Beguine 1
75Beguine 2
76Rumba 1
77Samba 1
78Samba 2
DANCE
79Techno 1
80House 1
81House 2
82Pop Dance 2
83Down Beat
84Techno 2
85Progressive
86Rap 1
87Rap 2
88Disco
89Soft Disco
90Disco Party
9170's Disco
9270's Disco Funk
93Club Dance
99Electric Funk
100Groove
101Soul
102Hip Hop Soul
103R&B
104Soul Beat
23
Page 24
Army
105British Soul Pop
JAZZ & SWING
106Latin Jazz
107Big Band 1
108Dixieland 1
109Broadway Big Band
110Swing
111Fusion
112Swing Shuffle
113Big Band Medium
114Dixieland 2
115Ragtime
116Swing Ballad
COUNTRY
117Country Pop 1
118Bluegrass 1
1198Beat Country
120Modern Country
121Country Pop 2
122Bluegrass 2
1232/4 Country
124Country Quick Steps
125Country Folk
126Country Shuffle
127Country Ballad
LATIN
128Samba 3
129Bossa Nova
130Latin
131New Reggae
132Reggae Dance
133Paso Doble
134Lite Bossa
135Latin Rock
136Slow Bolero
137Disco Samba
138Mambo
139Meneito
140Rumba 2
141Rumba 3
142Lambada
143Pop Cha Cha 1
Song List
No.English Name
FOLK & COUNTRY
1Toccata
2Carry Me Back To Old Virginny
3El Condor Pasa
4Greensleeves
5Home Sweet Home
6Aloha Oe
7Long Long Ago
8Heidenroslein
9Die Lorelei
10Over The Waves
11Gwine To Run All Night
12Oh! Susanna
24
144Pop Cha Cha 2
145Salsa 2
TRADITIONAL
146Waltz
147Old Waltz
148English Waltz
149German Waltz
150Italian Mazurka
151Mexico Waltz
152Vienna Waltz
153Slow Waltz 2
154Jazz Waltz
155Polka
1566/8 March
157 German Polka
158
159 March
160 US March
161 Musette
169Pianist
170Jazz
171Piano Rock
172Pop Bossa
173March
174Piano Beat
175Piano Bar
176Blues
177Slow Waltz
178Ballad
1796/8 Ballad
180Pop
13Turkey In The Straw
14Aura Lea
15When The Saints Go Marching In
16I’ve Been Working On The Railroad
17With Games
18Way Home
19 Michael Row The Boat Ashore
20Arirang
21The Quilting Party
22The Colorado Trail
23I'd Like To Be In Texas
24Shenandoah
25Down In The Valley
26On Top Of Old Smoky
March
Page 25
27Barbara Allen
28Careless Love
29 Sweet Betsy From Pike
30Jesse James
31The Cowboy's Lament
32Red River Valley
GOLDEN & POP
33Traumerei
34My Darling Clementine
35Twinkle Twinkle Little Star
36Yankee Doodle
37Fruhlingsstimmen
38My Bonnie
39 Jingle Bells
40Frohlicher Landmann
41Joy To The World
42La Paloma
43Toy Symphony
44Auld Lang Syne
45La Cucaracha
46Ave Maria
47La Reine De Saba
48 Tales Of Hoffman
49 Little Brown Jug
50La Donna E Mobile
51 Battle Hymn Of The Republic
52 Serenata
53 Yellow Rose Of Texas
54 Bridal March
55 The Wabash Cannon Ball
56 Zartliche Liebe
57 Chanson Du Toreador
58 Annie Laurie
59 Danny Boy
60 An Die Musik
61 Lieder Ohne Worte Op.62 No.6
62 Spanish Serenade
63 Die Forelle
64 Madame Butterfly
65 Invitation To The Dance
66 Valse Des Fleurs
67 Moments Musicaux
68 Moldau
69 Silent Night
70 Dreaming Of Home And Mother
71 Ring Ring De Banjo
72 Der Lindenbaum
73 Zigeunerweisen
74 The Maiden's Prayer
75 Der Freischutz
76 Maria! Mari!
77 Anitra's Dance
78 Sadko-Chanson Indoue
79 Orpheus
80 William Tell Overture
CLASSICAL
81Symphony No.6 "Pathetic"
82Wedding March
83Wiegenlied 3
84Turkish March
85Wiegenlied 2
86Prelude Op.28 No.15
87 Menuet
88 Piano Concerto
89 Piano Concerto 2
90 Symphony No. 94 "Suprise"
97 A Lover's Concerto
98 Air For The G-String
99 An Der Shonen Blauen Donau
100 Auf Flugeln Des Gesanges
101Beautiful Dreamer
102Dance Des Mirlitons
103Etude Op.10 No.3
104 Gavotte
105 Hungarian Dances No.5
106 From The New World
107 Serenata Rimpiant
108 Triumphal March
109 The Skaters Waltz
110 O Sole Mio
111 Waves Of The Danube
112 Santa Lucia
113 Solveig's Song
114 Piano Sonatan No.8 In C Minor (Pathetique)
115 Brahms Waltz
116 Aida
117 Carmen-Prelude
118 L'Arlesienne
119 Uungarische Tanz
120 Mazurka
121 Pizzicato Polka
122 Menuett
123 Rigoletto
124 Serenade
125 Song Without Words
126 Swan
127 The Dying Swan
128 Swan Lake Waltz
129 The Happy Farmer
130 The Sleeping Beauty
131 La Traviata
132 Wiegenlied
Mov.2 Adagio Non Troppo Piano Sonata No.9 In
133
D
134 Piano Sonata No.11 In A
135 Prelude In C
136 Emperor Waltz
137 March Militaire
138 Symphony No.40
PIANO
139 Hanon Piano Fingering 1
140Hanon Piano Fingering 2
25
Page 26
141Hanon Piano Fingering 3
142Hanon Piano Fingering 4
143Hanon Piano Fingering 5
144Hanon Piano Fingering 6
145Hanon Piano Fingering 7
146Basic Tutorial Beyer Piano 8
147Basic Tutorial Beyer Piano 12
148Basic Tutorial Beyer Piano 13
149Basic Tutorial Beyer Piano 14
150Cuckoo
151Basic Tutorial Beyer Piano 15
152Basic Tutorial Beyer Piano 16
153Basic Tutorial Beyer Piano 18
154Butterfly
155Basic Tutorial Beyer Piano 19
156Basic Tutorial Beyer Piano 20
157 Basic Tutorial Beyer Piano 21
158 Basic Tutorial Beyer Piano 29
159 Basic Tutorial Beyer Piano 45
160 Christmas Eve
161 Basic Tutorial Beyer Piano 50
162 Beyer Eight Degrees Jump Etude
163 Old Folks At Home (Piano)
164 Yankee Doodle (Piano)
165 Kaiser Walzer
166 Etude On Leger Lines 2
167 From A Story Book
168 Dance Of The Four Swans From "Swan Lake"
169 Jesus Saviour Pilot Me
170 Old Macdonald Had A Farm
171 Away In A Manger
172 Did You Ever See A Lassie
173 Old France
174 Santa Claus Is Coming To Town
175 Dancing Raindrops
176 Comin'Round The Mountain
177 Song Of The Brook
Mix Pattern List
No. English Name
CLUB
1 Progressive House 1
2 Electro house
3 Tropical House
4 Deep House
5 Progressive House 2
DANCE POP
6 Dance Pop 1
7 Dance Pop 2
8 Electronic Dance
9 Pop
EURO DANCE
10 Euro Dance 1
11 Euro Dance 2
12 Euro Dance 3
TRANCE
13 Trance 1
14 Trance 2
15 Trance 90's vibe
ELECTRO
16 Electro 1
17 Electro 2
18 Electro 3
HIP HOP
19 Hip Hop 1
20 Hip Hop 2
21 US Hip Hop
CHILLOUT
22 Chillout 1
23 Chillout 2
24 Chillout 3
DUB
25 Dub 1
26 Dub 2
27 Dub 3
HARDCORE
28 Hardcore 1
29 Hardcore 2
30 Hardcore 3
Trademarks & Licenses
Alesis is a trademark of inMusic Brands, Inc., registered in the U.S. and other countries.
All other product or company names are trademarks or registered trademarks of their respective owners.
26
Page 27
alesis.com
Manual Version 1.0
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.