2N Helios IP User manual, 1510 v1.11 User Manual

Loading...

2N® Helios IP

Door Access Communicator

User Manual

 

Version

1.11.0

 

 

 

Firmware

1.11.x

www.2n.cz

 

 

 

 

 

 

 

 

 

 

 

The 2N TELEKOMUNIKACE a.s. joint-stock company is a Czech manufacturer and supplier of telecommunications equipment.

The product family developed by 2N TELEKOMUNIKACE a.s. includes GSM gateways, private branch exchanges (PBX), and door and lift communicators.

2N TELEKOMUNIKACE a.s. has been ranked among the Czech top companies for years and represented a symbol of stability and prosperity on the telecommunications market for almost two decades. At present, we export our products into over 120 countries worldwide and have exclusive distributors on all continents.

2N® is a registered trademark of 2N TELEKOMUNIKACE a.s.. Any product and/or other names mentioned herein are registered trademarks and/or trademarks or brands protected by law.

Declaration of Conformity

2N TELEKOMUNIKACE a.s. hereby declares that the 2N® Helios IP product complies with all basic requirements and other relevant provisions of the 1999/5/EC directive. For the full wording of the Declaration of Conformity see the CD-ROM enclosed and at www.2n.cz.

The 2N TELEKOMUNIKACE company is a holder of the ISO 9001:2000 certificate. All development, production and distribution processes of the company are managed by this standard and guarantee a high quality and advanced technical level of and a professional approach to all of our products.

Contents

1. Product Overview...............................................................

7

1.1

Product Description .......................................................................................................

8

 

Basic Features..................................................................................................................

8

 

Advantages of Use ...........................................................................................................

8

 

Optional Accessories........................................................................................................

9

1.2

2N® Helios IP Components and Associated Products .............................................

10

 

Basic Units......................................................................................................................

10

 

Extending modules .........................................................................................................

11

 

Extenders .......................................................................................................................

11

 

Software Facilities of 2N® Helios IP Basic Units ............................................................

12

 

Mounting Accessories ....................................................................................................

13

 

Increased Resistance Accessories ................................................................................

15

 

GSM and UMTS Connection Accessories .....................................................................

15

 

VoIP Connection Accessories ........................................................................................

16

 

Electric Locks .................................................................................................................

16

 

Other Accessories ..........................................................................................................

16

1.3

Terms and Symbols Used ...........................................................................................

17

 

Manual Symbols .............................................................................................................

17

2. Description and Installation ............................................

19

2.1

Before You Start ...........................................................................................................

20

 

Product Completeness Check........................................................................................

20

2.2

Mounting – Mechanical Installation............................................................................

21

 

Overview of Installation Types .......................................................................................

21

 

Surface Mounting ...........................................................................................................

22

 

Flush Mounting ...............................................................................................................

26

 

Increased Resistance Version Installation .....................................................................

26

2.3

Mounting – Electrical Installation ...............................................................................

27

 

Description of Printed Circuit Board Connectors............................................................

27

 

Configuration Connector Connection .............................................................................

33

 

Display Connector ..........................................................................................................

33

2.4

Mounting - Completion ................................................................................................

35

 

Most Frequent Mounting Errors......................................................................................

35

2.5

Extending Module Connection....................................................................................

37

 

Maximum Count of Extenders ........................................................................................

37

 

Module Cable Interconnection........................................................................................

38

 

Button Numbering ..........................................................................................................

39

 

Button Numbering – Info Panel Sets ..............................................................................

40

3. 2N® Helios IP Configuration ............................................

41

3.1

Acoustic Signalling and Keypad Configuration........................................................

42

 

Tone Signalling...............................................................................................................

42

 

Switching to Default Network Parameters – Static IP Address ......................................

43

 

Switching to Default Network Parameters – Dynamic IP Address .................................

45

 

Web Server Switch On ...................................................................................................

46

3.2

Quick Configuration for Calling ..................................................................................

48

 

Language Selection........................................................................................................

48

 

Network Settings ............................................................................................................

48

 

Static Parameter Setting ................................................................................................

48

 

SIP Parameter Setting....................................................................................................

49

 

Telephone Directory Setting...........................................................................................

50

 

Lock Setting....................................................................................................................

54

3.3

Configuration ................................................................................................................

55

 

IP Address Obtaining from DHCP ..................................................................................

55

 

Manual IP Address Setting.............................................................................................

55

 

Description of 2N® Helios IP Network Scanner ..............................................................

56

 

Login ...............................................................................................................................

57

 

Language Selection........................................................................................................

57

 

Information......................................................................................................................

58

 

Telephone Directory .......................................................................................................

60

 

Scheduler .......................................................................................................................

62

 

Locks ..............................................................................................................................

64

 

Network ..........................................................................................................................

67

 

Date and Time ................................................................................................................

68

 

SIP Settings....................................................................................................................

69

 

Administration Web Server.............................................................................................

72

 

Audio ..............................................................................................................................

73

 

Video ..............................................................................................................................

74

 

Audio Codecs .................................................................................................................

75

 

Video Codecs .................................................................................................................

77

 

Streaming .......................................................................................................................

79

 

Auto Update....................................................................................................................

85

 

Display............................................................................................................................

86

 

System Log.....................................................................................................................

88

 

Miscellaneous.................................................................................................................

88

 

Tools...............................................................................................................................

92

 

Configuration ..................................................................................................................

93

 

Display Program .............................................................................................................

94

 

Firmware.........................................................................................................................

95

 

User Sounds...................................................................................................................

96

 

Network Trace ................................................................................................................

98

 

Licence ...........................................................................................................................

98

4. Function and Use ...........................................................

101

4.1

2N® Helios IP Control as Viewed by External User .................................................

102

 

Quick Dialling Buttons ..................................................................................................

102

 

Calling to Telephone Directory Position .......................................................................

102

 

Calling to User-Defined Telephone Number ................................................................

102

 

Incoming Call Answer and Reject ................................................................................

103

 

Code Door Opening (Switch Activation).......................................................................

103

 

User Activation and Deactivation .................................................................................

103

 

Profile Activation and Deactivation...............................................................................

103

4.2

Display-Equipped 2N® Helios IP Control as Viewed by External User .................

104

 

Advertisement Mode ....................................................................................................

104

 

Electronic Name Tags ..................................................................................................

104

 

Calling to Number.........................................................................................................

105

 

Telephone Directory .....................................................................................................

105

 

Status Information ........................................................................................................

106

4.3

2N® Helios IP Control as Viewed by Internal User ..................................................

107

 

Receiving of 2N® Helios IP Calls..................................................................................

107

 

Calling to 2N® Helios IP................................................................................................

107

 

Code Door Opening (Switch Activation).......................................................................

107

 

User Activation and Deactivation .................................................................................

107

 

Profile Activation and Deactivation...............................................................................

108

4.4

Maintenance................................................................................................................

109

5. Technical Parameters ....................................................

111

5.1 Technical Parameters ................................................................................................

112

Power Supply ...............................................................................................................

112

VoIP..............................................................................................................................

112

Interfaces......................................................................................................................

112

Others...........................................................................................................................

112

6. Supplementary Information ..........................................

113

6.1

Regulations and Directives .......................................................................................

114

6.2

List of Figures.............................................................................................................

115

6.3

List of Tables ..............................................................................................................

118

1 1. Product

Overview

In this section, we introduce the 2N® Helios IP product, outline its application options and highlight the advantages following from its use.

Here is what you can find in this section:

Product Description

2N® Helios IP Components and Associated Products

Changes

Terms and Pictograms Used

7

Product Description

 

 

1.1

 

 

 

 

 

 

1.1 Product Description

Basic Features

The 2N® Helios IP door communicator is capable of replacing the traditional doorbell button panel with a speakerphone and the entire system of wiring, bells and intercom installations in buildings where structured cabling is installed. Its installation is very easy, all you need is connect it to the other LAN elements using a twisted UTP cable.

By pressing any of the quick dial buttons, 2N® Helios IP will set up a call to the number that had been stored in the respective memory. The number of buttons can be extended up to 54 using 8-button or 16-button extending modules.

Thanks to an integrated scheduler it is possible to configure each of the buttons in such a way that the called party is always available.

It is possible to define up to three telephone numbers for each of the buttons, between which 2N® Helios IP switches at absence.

Beside the buttons, you can also use the numeric keypad, which also serves as a code lock. With the use of this keypad you can also use the system as a button telephone. The keypad can be combined with the quick dialling buttons.

2N® Helios IP supports video streaming. This function allows the user to scan the area in front of the 2N® Helios IP camera. Thus, 2N® Helios IP provides better and broader services than a standard house intercom systems. Thanks to the integrated SIP protocol it can make use of all VoIP services, call forwarding at absence (to another office, to the VoiceMail system or a cellular phone) or call switching (from the secretary’s office to a specific person, e.g.).

In addition, 2N® Helios IP includes a switch that helps you control the electric lock from any VoIP telephone (by entering the code using tone dialling).

Advantages of Use

Works in the Ethernet network

Power supply over Ethernet – PoE

SIP communication protocol

Integrated web server for configuration

Up to 54 quick dialling buttons

Up to 999 users / user groups

Video (camera-equipped models) streaming

Display of information (display-equipped models)

Integrated scheduler with day/night/weekend modes

Can be used as a standard VoIP telephone and a code lock (keypad-equipped models)

8

Product Description

 

 

1.1

 

 

 

 

 

 

Modular system – up to 54 buttons + keypad

Smart design, top material – high-quality stainless steel

Flat design – can be mounted without wall cutting

Water resistant

Perfectly hermetic buttons

Electronic part completely separated from the name plates

Electric lock switch – controlled directly from the VoIP telephone

Quality white backlighting of buttons – white LEDs

DTMF according to RFC2833, in-band

High-quality acoustic parameters

Electronic volume setting (without cover opening) and HandsFree

Electronic adjustment of backlight

Optional Accessories

Vandal resistant Mask

A robust metal cover for increased resistance against vandalism.

The cover price includes a steel wall mounting box.

It can also be purchased additionally.

Additional switch

Normally-open/Normally-closed contact (relay).

Can be switched on for an unlimited period of time.

9

2N® Helios IP Components and Associated Products

 

 

1.2

 

 

 

 

 

 

1.22N® Helios IP Components and Associated Products

Basic Units

9137110(C)E

9137130(C)E

9137160(C)E

9137111(C)E

9137131(C)E

9137161(C)E

Basic unit

Basic unit

Basic unit

1 button

3 buttons

3×2 buttons

9137110(C)KE

9137130(C)KE

9137160(C)KE

9137160(C)KDE

9137111(C)KE

9137131(C)KE

9137161(C)KE

 

Basic unit

Basic unit

Basic unit

Basic unit

1 button

3 buttons

3×2 buttons

3×2 buttons

+ keypad

+ keypad

+ keypad

+ keypad

 

 

 

+ display

(C) = integrated camera

10

2N® Helios IP Components and Associated Products

 

 

1.2

 

 

 

 

 

 

Extending modules

9135181E

9135182E

Extending module

Extending module

8 buttons

8×2 buttons

9135310E

Info panel

Backlit panel without buttons; used for insertion of a telephone directory, company logo, house number, etc.

Extenders

9135301E

Spare button name plate

9135302E

Spare double-button name plate

9135311E

Info panel – name plate

Replacing cover for four name tags. Helps you use a half of the extending module for insertion of a telephone directory, working hours, etc.

Tips

All units can be surface mounted without needing any additional accessories.

To make them even more robust and resistant, use a Vandal Resistant mask.

Caution

For flush or outdoor mounting you need to use the accessories; see the Mounting Accessories subsection.

11

 

 

2N® Helios IP Components and Associated Products

 

 

 

1.2

 

 

Software Facilities of 2N® Helios IP Basic Units

 

 

 

 

 

 

 

 

 

 

91371x1(CK)

91371x0(CK)

 

 

 

2N® Helios IP

2N® Helios IP

 

 

 

 

 

Basic

Professional

 

 

 

 

Number of users

54

999

 

 

 

 

Maximum number of users – phone

 

 

 

 

 

 

 

 

 

directory capacity.

 

 

 

 

 

 

 

 

 

Number of time profiles

3

20

 

 

 

 

 

Maximum number of time profiles.

 

 

 

 

 

 

 

 

 

Electric lock codes

2 global,

10 global,

 

 

 

 

Maximum number of global codes and

No user codes

User codes available

 

 

user codes for electric lock activation.

 

 

 

 

 

 

 

 

 

Telephone mode

YES

YES

 

 

 

 

Enables 2N Helios IP to behave as an

 

 

 

 

 

 

 

 

 

ordinary telephone – enables the phone

 

 

 

 

 

 

 

 

 

number to be dialled from the keypad.

 

 

 

 

 

 

 

 

 

RTSP server

NO

YES

 

 

 

 

Built-in RTSP server for audio and video

 

 

 

 

 

 

 

 

 

streaming independently of phone calls.

 

 

 

 

 

 

 

 

 

SIP video

YES

YES

 

 

 

 

Supports video calls.

 

 

 

 

 

 

 

 

 

Activation codes

NO

YES

 

 

 

 

Supports codes for activation and

 

 

 

 

 

 

 

 

 

deactivation of users and time profiles.

 

 

 

 

 

 

 

 

 

Substitute function

NO

YES

 

 

 

 

Enables to enter a substitute for a user

 

 

 

 

 

 

 

 

 

that will be dialled in case the user is

 

 

 

 

 

 

 

 

 

unreachable or inactive.

 

 

 

 

 

 

 

 

 

TFTP client

NO

YES

 

 

 

 

Automatic configuration and firmware

 

 

 

 

 

 

 

 

 

upgrade from TFTP server.

 

 

 

 

 

 

 

 

 

Extended lock control

NO

YES

 

 

 

 

Extended settings for built-in and

 

 

 

 

 

 

 

 

 

additional switches.

 

 

 

 

 

 

 

 

 

User sounds

NO

YES

 

 

 

 

Enables recording of user sounds to

 

 

 

 

 

 

 

 

 

replace standard status signalling

 

 

 

 

 

 

 

 

 

sounds.

 

 

 

 

 

 

 

12

2N® Helios IP Components and Associated Products

 

 

1.2

 

 

 

 

 

 

To upgrade 2N® Helios IP Basic to 2N® Helios IP Professional, use the licence key, Part No. 9137901.

Mounting Accessories

9135331E

9135351E

9135361E

Surface 1-module roof

Wall mounting box

Wall mounting box

Dimensions

with 1-module frame

with 1-module roof

 

 

103×218×60 mm

Dimensions

Roof dimensions

(W×H×D)

125×235×46 mm

129×240×41 mm

 

(W×H×D)

(W×H×D)

 

Wall hole

Wall hole

 

110×220×50 ±5 mm

110×220×50 ±5 mm

13

2N® Helios IP Components and Associated Products

 

 

1.2

 

 

 

 

 

 

9135332E

9135352E

9135362E

Surface 2-module roof

Wall mounting box

Wall mounting box

Dimensions

with 2-module frame

with 2-module roof

 

 

203×218×60 mm

Dimensions

Roof dimensions

(W×H×D)

225×235×46 mm

229×240×41 mm

 

(W×H×D)

(W×H×D)

 

Wall hole

Wall hole

 

210×220×50 ±5mm

210×220×50 ±5mm

The mounting accessories are made of stainless steel. For outdoor applications, the use of the roof is required unless weather protection is provided otherwise. The box with frame (without roof) allows for installation of 2N® Helios IP in indoor applications so that the unit does not practically stick out (up to 1 mm).

14

2N® Helios IP Components and Associated Products

 

 

1.2

 

 

 

 

 

 

Increased Resistance Accessories

Warning

Item No. 9135351E cannot be used! Use a dedicated box for installation of the Vandal resistant mask!

9135511E

Vandal resistant mask basic module + AntiVandal wall mounting box

9135511KE

1-basic module Vandal resistant mask with keypad + Anti-Vandal wall mounting box

9135515E

1-extending module Vandal resistant mask + AntiVandal wall mounting box

Notes

Use these covers to make the basic units or sets with up to 11 buttons more resistant. Larger assemblies can be provided upon request.

Be sure to use the more resistant version for flush mounting. No roof is required for outdoor applications of this version.

GSM and UMTS Connection Accessories

505004E

505214E

505612E

2N® VoiceBlue Lite

2N® VoiceBlue Enterprise

2N® UMTS Office Route

15

2N® Helios IP Components and Associated Products

 

 

1.2

 

 

 

 

 

 

VoIP Connection Accessories

91378100

91378300

91378350

PoE injector

Grandstream VoIP telephone

Grandstream VoIP video telephone

Electric Locks

932070E

932080E

932090E

BEFO 1211 12V / 600 mA

BEFO 1221

BEFO 1211MB

 

with momentum pin

with mechanical blocking

Other Accessories

9137310E

Additional switch

Additional appliance control, normally open/closed contact option, time-unlimited connection, up to 48 V/2 A.

91341481E

91341481AU

91341481GB

91341481US

Adapter 12 V/2 A

A stabilised power supply has to be used if the Ethernet (PoE) power supply is not available.

932928E

12 V transformer

16

Terms and Symbols Used

 

 

1.3

 

 

 

 

 

 

1.3 Terms and Symbols Used

Manual Symbols

Safety

Always abide by this information to prevent injury of persons.

Warning

Always abide by this information to prevent damage to the device.

Caution

Important information for system functionality.

Tip

Useful advice.

Note

Additional information.

17

2 2. Description

and

Installation

This section describes the 2N® Helios IP product and its installation.

Here is what you can find in this section:

Product Description

Before You Start

Mounting – Mechanical Installation

Mounting – Electrical Installation

Connection of Extender Units

19

Before You Start

 

 

2.1

 

 

 

 

 

 

2.1 Before You Start

Product Completeness Check

Please check whether the contents of the package of your new 2N® Helios IP complies with the following list.

1 2N® Helios IP

1 installation CD

1 spare seal

1 drilling template

1 hexagonal wrench

1 spare name plate

1 terminal block plug

2 screws

2 dowels

20

Mounting – Mechanical Installation

 

 

2.2

 

 

 

 

 

 

2.2 Mounting – Mechanical Installation

Overview of Installation Types

An overview of the installation types and the list of the required components are provided in the table below.

Overview of installation

What you need for installation

types

 

Indoor, on surface

 

 

 

 

2N® Helios IP only

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Indoor, flush mounting

2N® Helios IP

box with 1-module frame 9135351E or

box with 2-module frame 9135352E

Outdoor, on surface

2N® Helios IP

Surface 1-module roof 9135331E or

Surface 2-module roof 9135332E

Outdoor, flush mounting

2N® Helios IP

Wall mounting box with 1-module roof 9135361E or

Wall mounting box with 2-module roof 9135362E

With increased resistance

2N® Helios IP

Vandal resistant mask with box, version according to the assembly

21

Mounting – Mechanical Installation

 

 

2.2

 

 

 

 

 

 

Indoor application means:

Indoor areas with a low relative air humidity value (e.g., hallways, offices and other heated rooms).

Indoor areas where humidity condenses on walls but never flows down the walls (porches, storage areas, industrial areas, e.g.).

Outdoor areas where protection against rain and water flowing down the wall is provided (sheds, passages. e.g.).

Outdoor application means:

Environments where the product is exposed to rain or where water may flow down the walls (fence, outer wall of a building, e.g.).

Caution

The warranty shall not apply to product failures and defects caused by improper installation (contrary to these instructions). The manufacturer is neither liable for damages caused by theft within an area that is accessible after the attached electric lock is switched. The product is not designed as a burglar protection device except when used in combination with a standard lock, which has the security function.

Surface Mounting

Figure 2.1

Hole Drilling

1.Drill holes according to the template included in the 2N® Helios IP supply. Insert the included dowels in the wall holes.

2.Use the hexagonal wrench included in the supply and remove the 2N® Helios IP metal cover. Remove the screw in the lower part of the metal cover and fold out the cover as shown in Figure 2.2.

3.Use a cross-head screwdriver to remove the plastic cover and demount the cover.

22

Mounting – Mechanical Installation

 

 

2.2

 

 

 

 

 

 

Figure 2.2 Cover Removing

Figure 2.3 Plastic Cover Removing

Figure 2.4 Multiple-Module Assembly

Warning

Never remove the main board or camera electronics from under the lower cover while installing 2N® Helios IP. Do not disconnect the camera flat cable from the main board. Do not bend and press upon the flat cable either.

4.In multiple-module assemblies connect the boxes according to

Figure 2.4, placing the basic module to the left and the extending modules to the right. The interconnecting cable shall be connected later!

5.Install blank modules on the unused side holes as shown in Figure 2.4.

6.If you are installing a roof module, put it on the wall now.

7.Fix 2N® Helios IP on the wall with screws as shown in Figure 2.6. Carry the supply cables (Ethernet, lock, power cables) to the basic module box through one of the holes.

Warning

Make sure that the mounting surface for the 2N® Helios IP door communicator is perfectly flat. Avoid mechanical overload upon the bottom part of the cover. An incorrect installation on an uneven surface may lead to cover deformation and thus product malfunctions.

23

Mounting – Mechanical Installation

 

 

2.2

 

 

 

 

 

 

8.While installing a roof module, paste its top and side edges to the wall using silicon glue as shown in Figure 2.5 to prevent water from flowing into the box along or around the cables.

9.Connect the cables as described in subsection 2.4, Mounting – Electrical Installation. Make sure that the cables are not squeezed while installing the plastic cover. For the correct cable installation, refer to Figure 2.7.

Figure 2.5

Roof Mounting

Figure 2.6

Wall Mounting

10.Remove the protective foil from the display (for display-equipped 2N® Helios IP versions only).

11.Make sure that the cables are placed properly inside and that none of them obstructs a perfect cover closure.

12.Make sure that the three loudspeaker holder feet fit into the board holes. Keep the required loudspeaker position to make the seal work properly.

13.Having mounted the unit on the wall and connected all cables, replace the plastic cover using cross-recessed screws.

Warning

Remember to tighten all the four corner screws to fix the loudspeaker seal after electric installation to avoid water in-leak! A PH2 cross-head screwdriver is recommended.

14.Take out the name plates from the plastic cover as shown in Figure 2.8. Use a flat-bladed screwdriver, for example.

15.Remove the inserts from the name plates.

16.Insert the printed foil labels.

17.Put the inserts back in the name plates.

18.Replace the name plates, clicking them into position. The name plates hold the matt foil inserted underneath.

19.Check whether a silicon seal is inserted in the top groove of the plastic cover. A spare seal package is included.

20.Close the metal cover and fix it with screws.

24

Mounting – Mechanical Installation

 

 

2.2

 

 

 

 

 

 

Figure 2.7 Cabling

Figure 2.8 Name Plate Removing

Figure 2.9 Insert Removing

Figure 2.10 Label Inserting

Outdoor installation rules

Always connect button backlighting – it is used for heating.

The joint between the roof module and the wall must be filled with a waterproof cement to prevent water in-leak (see Figure 2.5).

Water must not leak in along or around the cables.

Name tag material and printing

Each 2N® Helios IP package includes a sheet of transparent foil for laser printing. Cut the printed foil into pieces and insert the labels in the name plates. Do not use paper to avoid water in-leak and paper damage.

Red arrows are printed on the name plate. Make sure that the text and the arrow do not overlap. We recommend you to use a template (MS Word) available at www.2n.cz for printing.

Single button

Double button

(whole)

(horizontally divided)

Name 01

Name 01

Name 04

Name 02

Name 02

Name 05

Name 03

Name 03

 

 

25

Mounting – Mechanical Installation

 

 

2.2

 

 

 

 

 

 

Name 06

Flush Mounting

Follow the installation instructions included in the flush mounting box delivery.

Increased Resistance Version Installation

Follow the installation instructions included in the Anti-Vandal box delivery.

26

Mounting – Electrical Installation

 

 

2.3

 

 

 

 

 

 

2.3 Mounting – Electrical Installation

2N® Helios IP is designed for connection in the Ethernet computer network (10/100BASE-T) using a UTP cable. Use a CAT 5e UTP cable at least for connection.

2N® Helios IP is fed through the PoE (Power over Ethernet) technology. No additional cabling is therefore necessary. If your Ethernet is not equipped with the PoE technology, it is possible to use a PoE injector, Part No. 91378100. As an alternative, you can use a power adapter, Part No. 91341481E. 2N® Helios IP is configured over an integrated administration web server, which can be controlled from any web browser, e.g., Mozilla Firefox.

Description of Printed Circuit Board Connectors

In Figure 2.11 you can see the location of the printed circuit board (PCB) connectors. Connectors to which the accessories can be connected and connectors that serve for configuring 2N® Helios IP are indicated on the board. The UTP cable for the Ethernet connection is to be connected to the terminal block X2 as shown in Table 2.1. The terminal block can be removed from the PCB. The connection of each of the connectors is described in the subsections below.

27

Mounting – Electrical Installation

 

 

2.3

 

 

 

 

 

 

Power

Terminal block Configuration connector

adapter

 

+

 

 

 

 

 

91341481E

 

12V / 2A DC

 

 

 

Speaker

 

 

 

 

 

connector

 

+

 

El. lock

+

 

+

 

 

 

932070E

 

 

Display

932080E

 

 

connector

932090E

 

 

 

Camera connector

Additional lock connector

Microphone

Connector for

connector

extending modules

Figure 2.11 Description of 2N® Helios IP connectors, PCB version 530v2

28

Mounting – Electrical Installation

 

 

2.3

 

 

 

 

 

 

Power

Terminal block Configuration connector

adapter

 

+

 

 

 

 

 

91341481E

 

12V / 2A DC

 

 

 

Speaker

 

 

 

 

 

connector

 

+

 

El. lock

+

 

+

 

 

 

932070E

 

 

Display

932080E

 

 

connector

932090E

 

 

 

Camera connector

Additional lock connector

Microphone

Connector for

connector

extending modules

Figure 2.12 Description of 2N® Helios IP connectors, PCB version 535v1, 535v2

29

Mounting – Electrical Installation

 

 

2.3

 

 

 

 

 

 

Power

 

Terminal block Configuration connector

adapter

 

+

 

 

 

 

 

91341481E

 

12V / 2A DC

 

 

 

Speaker

 

 

 

 

 

connector

 

+

 

El. lock

+

 

+

 

 

 

932070E

 

 

Display

932080E

 

 

connector

932090E

 

 

 

Camera connector

Additional lock connector

RFID Card reader

Microphone

Connector for

connector

connector

extending modules

Figure 2.13 Description of 2N® Helios IP connectors, PCB version 535v5

Terminal Block X2 Connection

Terminal block X2 includes 10 terminals whose functions are distinguished by colour. Terminals 5–10 are used for connecting 2N® Helios IP to the Ethernet. Terminals 3–4 are designed for connecting the electric lock and terminals 1–2 help connect an external 12V / 2A DC power supply if no PoE power supply is available.

1.The terminal block is included in the package. To adjust an already installed 2N® Helios IP, disconnect it IP from the power supply. Then pull to remove the terminal block from the printed circuit board.

2.Insert the wires under the respective terminals.

3.Tighten the terminals using a flat screwdriver.

4.Replace the terminal block to the printed circuit board.

30

Mounting – Electrical Installation

 

 

2.3

 

 

 

 

 

 

Caution

Make sure that the cables leading through the 2N® Helios IP cover bottom groove are installed properly. For the correct installation of the cables refer to Figure 2.7.

Ethernet Connection

For the connections and meanings of the wires see the table below. Join UTP cable wires 4 (blue) and 5 (white-blue) and attach them under terminal 7 on 2N® Helios IP. In the same way, join wires 7 and 8 and place them under terminal 5 of 2N® Helios IP.

 

RJ-45

 

 

 

 

2N® Helios IP

 

 

 

Pin No.

Marking

Colour

Terminal No.

 

 

 

 

1

Tx+

 

 

 

10

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2

Tx –

 

 

 

9

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3

Rx+

 

 

 

8

 

5

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4

PoE –

 

 

 

6

 

6

 

 

 

 

 

 

7

 

 

 

 

 

 

 

 

5

PoE –

 

 

 

6

 

8

 

 

 

 

 

 

9

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

10

8

1

6

Rx –

 

 

 

7

 

 

 

 

 

 

 

 

 

 

 

7

PoE +

 

 

 

5

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

8

PoE +

 

 

 

5

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Table 2.1 Terminal Block Connections

Electric Lock Connection

The electric lock can be connected to terminals 3 and 4 of terminal block X2.

Electric lock

 

2N® Helios IP

Marking

Colour Terminal No

 

 

3

 

 

 

 

3

4

+

 

4

 

932070E

932080E

932090E

Table 2.2 Terminal Block Connection for Electric Lock

Terminals 3 and 4 are connected to a relay on the 2N® Helios IP board. The relay terminals may act as normally open or normally closed contacts. Configuration is performed through the configuration connector X1 as described in the

31

Mounting – Electrical Installation

 

 

2.3

 

 

 

 

 

 

Configuration Connector Connection subsection. Set on the configuration connector whether the electric lock will be powered from an external or internal power supply.

External Power Supply Connection

If the Ethernet network is not equipped with the PoE technology, you have two alternative options how to supply power to 2N® Helios IP.

1.Using a PoE injector, Part No. 91378100. 2N® Helios IP is then powered through an Ethernet cable as shown in Tab. 1 above.

2.Using a power adapter, Part No. 91341481E.

The external power supply from a power adapter can be connected to terminals 1 and 2.

 

Electric lock

 

 

2N® Helios IP

 

 

 

Marking

Marking

Terminal No.

 

 

 

 

 

 

1

1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2

 

 

 

 

 

 

 

 

 

91341481E

+

 

 

 

2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Table 2.3 Terminal Block Connection for Power Adapter

 

32

Mounting – Electrical Installation

 

 

2.3

 

 

 

 

 

 

Configuration Connector Connection

The configuration connector is located in the upper part of the printed circuit board. Use the configuration jumpers to set whether the lock control relay should have a normally open or normally closed function and whether it should powered internally or externally.

Lock power supply

 

Relay

Configuration connector

Internal External

Normally Normally

Connection of jumpers

open

closed

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1 2 3 4 5 6 7

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1 2 3 4 5 6 7

1 2 3 4 5 6 7

1 2 3 4 5 6 7

Table 2.4 Connection of Configuration Connector Jumpers

Display Connector

The display connector includes the name plate backlighting ON/OFF switching pins and 2N® Helios IP resetting pins. The remaining pins are intended for display connection.

33

Mounting – Electrical Installation

 

 

2.3

 

 

 

 

 

 

2N® Helios IP resetting procedure

1.Switch 2N® Helios IP off.

2.Connect the jumper into the resetting (default setting) position (put the display switch into the F_RES position in the display-equipped models with 535v1 and 535v2 board versions).

3.Switch 2N® Helios IP on and wait for the acoustic start signalling.

4.Switch 2N® Helios IP off.

5.Remove the jumper from the resetting (default setting) position (put the display switch into the NORMAL position in the display-equipped models with 535v1 and 535v2 board versions).

6.Switch 2N® Helios IP on.

Normal

Default

 

 

Display

Display connector

Connector X19

operation

settings

 

connector X6

X7

PCB version

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PCB version

PCB version

535v5

 

 

 

 

530v2

535v1, 535v2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Table 2.5 Configuration Jumpers on Display Connector

To reset the default values of a display-equipped 2N® Helios IP, put the switch in the display right-hand bottom corner in position F_RES. This applies to modules with board versions 535v1 and 535v2 only. For 535v5 versions, use a jumper at connector X19.

Figure 2.14 Resetting Procedure – Display Model

34

Mounting - Completion 2.4

2.4Mounting - Completion

1.Remember to seal the 2N® Helios IP cable passage hole properly to avoid moisture in-leak and damage to electronics due to condensation.

2.Make sure that the wires inside 2N® Helios IP are not squeezed and insert the plastic top cover (a transparent plastic mould) carefully making its contacts plug into the electronics board connectors. Push the plastic cover into position moderately. If the part swings over an obstacle or one corner is higher than the others, remove the cover and find the obstacle. Then tighten the corner screws properly.

3.Mounting the metal sheet cover follow the steps included in the subsection dedicated to name plate removal. Make sure that the cover fits well and is

perfectly flat. If its bottom part is loose, the mounting wall is probably uneven. Support the corners to avoid 2N® Helios IP bending.

Caution

An improper mounting may significantly deteriorate the button function.

A poor outdoor mounting may cause water in-leak and damage to the electronics.

Most Frequent Mounting Errors

For illustration, a part of the plastic cover is removed in the figures below to reveal the sealed loudspeaker and the cover–seal touch point. The cross section plane is marked white for better orientation.

Poorly tightened screw

(a squeezed wire has the same effect)

WRONG

Gap between plastic cover and loudspeaker seal

- water may leak in and damage electronics

35

2N Helios IP User manual, 1510 v1.11 User Manual

Mounting - Completion 2.4

WRONG

Gap between plastic cover and loudspeaker seal

- water may leak in and damage electronics

If the loudspeaker support is in a wrong position, the plastic cover may catch the support brim (see the arrow) and, if treated roughly, lead to component deformations. Leakage may arise, see the upper arrow.

Properly tightened screw

RIGHT

The seal touches the plastic cover. Water flows out through a small hole (not shown in the figure).

Note: Water does not affect the loudspeaker Mylar membrane.

36

+ 83 hidden pages