Loading...
Quick Reference
CATA LY S T 8510 A N D
LI G H T ST R E A M 1010
HA R D WA R E IN F O R M AT I O N
Chassis Installation
WARNING: Before you install, operate or service the system, read the Site Preparation and Safety Guide. This guide contains important safety information you should know before working with the system.
Attaching Brackets and Guides
Installing a Chassis in a Rack
WARNING: Two people are required to lift the chassis. To prevent damage to the chassis and components, never attempt to lift the chassis by the handles on the power supplies or on the interface modules.
Ports and Cabling
|
PORT ADAPTER/ |
CABLE |
|
INTERFACE MODULE |
CONNECTORS |
|
PORTS |
|
|
10/100BaseT, T1/E1, |
RJ-45, RJ-48c |
|
CES, CE1 Frame Relay |
|
|
|
|
|
100BaseFX |
MT-RJ fiber |
ROUTE PROCESSOR |
155 Mbps, 622 Mbps |
|
CABLE |
|
|
PORTS |
CONNECTORS |
SC-type fiber |
Management port |
RJ-45 |
|
|
Gigabit Ethernet |
|
|
|
BNC |
Console port |
E1, CES, DS3/E3, CDS3 |
|
EIA/TIA-232 |
|
25 Mbps |
96-pin Molex |
Loading...