Bissell 35K3 User Manual

Size:
4.2 Mb
Download

Earn BISSELL Rewards!

Register your product today!

See details on back page

USER'S GUIDE

94Y2, 27F6, 35K3, 73H5 SERIES

2Thank You

3Safety Instructions

4-5 Product View

6 Assembly

7-12 Operations

13-15 Maintenance and Care

16Troubleshooting

17Accessories

18Replacement Parts

19Warranty

20Product Registration

20 Consumer Services

Thanks for buying a BISSELL Deep Cleaner

We’re glad you purchased a BISSELL deep cleaner. Everything we know about floor care went into the innovative design and construction of this complete, high-techhome cleaning system.

Your BISSELL deep cleaner is well made, and we back it with a limited two year warranty. We also stand behind it with a knowledgeable, dedicated Consumer Services department, so, should you ever have a problem, you’ll receive fast, considerate assistance.

My great-grandfatherinvented the floor sweeper in 1876. Today, BISSELL is a global leader in the design, manufacture, and service of high quality homecare products like your BISSELL deep cleaner.

Thanks again, from all of us at BISSELL.

Mark J. Bissell

Chairman, President & CEO

DETACHABLE INNOVATION

Complete Line of BISSELL Lift-Off® Products

Lift-Off®

Lift-Off®

Lift-Off®

Lift-Off®

Steam Mop

Deep Cleaner

Multi Cyclonic

Floors & More

 

 

Vacuum

Cordless Stick Vacuum

For more information visit www.bissell.com

2 w w w. b i s s e l l . c o m

8 0 0 . 2 3 7 . 7 6 9 1

IMPORTANT SAFETY INSTRUCTIONS

When using an electrical appliance, basic precautions should be observed, including the following:

Read all instructions before using your DEEP CLEANER.

WARNING:

To reduce the risk of fire, electric shock, or injury:

Do not immerse.

Use only on surfaces moistened by the cleaning process.

Always connect to a properly grounded outlet.

See Grounding Instructions.

Unplug from outlet when not in use and before conducting maintenance or troubleshooting.

Do not leave machine when it is plugged in.

Do not service machine when it is plugged in.

Do not use with damaged cord or plug.

If appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, have it repaired at an authorized Service Center.

Do not expose to rain, store indoors.

Do not pull or carry by cord, use cord as a handle, close door on cord, pull cord around sharp corners or edges, run appliance over cord, or expose cord to heated surfaces.

Unplug by grasping the plug, not the cord.

Do not handle plug or appliance with wet hands.

Do not put any object into appliance openings, use with blocked opening, or restrict air flow.

Do not expose hair, loose clothing, fingers or body parts to openings or moving parts.

Do not pick up hot or burning objects.

Do not pick up flammable or combustible materials (lighter fluid, gasoline, kerosene, etc.) or use in the presence of explosive liquids or vapor.

Do not use appliance in an enclosed space filled with vapors given off by oil base paint, paint thinner, some moth proofing substances, flammable dust, or other explosive or toxic vapors.

Do not pick up toxic material (chlorine bleach, ammonia, drain cleaner, gasoline, etc.).

Do not modify the 3-pronggrounded plug.

Do not allow to be used as a toy.

Do not use for any purpose other than described in this User’s Guide.

Do not unplug by pulling on the cord.

Use only manufacturer’s recommended attachments.

Use only cleaning products formulated by BISSELL for use in this appliance to prevent internal component damage. See the cleaning fluid section of this guide.

Keep openings free of dust, lint, hair, etc.

Do not point attachment nozzle at people or animals

Keep appliance on a level surface.

Turn off all controls before unplugging.

Unplug before attaching the TurboBrush®.

Be extra careful when cleaning stairs.

Close attention is necessary when used by or near children.

SAVE THESE INSTRUCTIONS.

This model is for household use only.

GROUNDING

INSTRUCTIONS

This appliance must be connected to a grounded wiring system. If it should malfunction or break down, grounding

provides a safe path of least resistance for electrical current, reducing the risk of electrical shock. The cord for this appliance has an equipment-groundingconductor and a grounding plug. It must only be plugged into an outlet that is properly installed and grounded in accordance with all local codes and ordinances.

Grounded

Outlets

Grounding Pin

WARNING:

Improper connection of the equipmentgrounding conductor can result in a risk of electrical shock. Check with a qualified electrician or service person if you aren’t sure if the outlet is properly grounded. DO NOT MODIFY THE PLUG. If it will not fit the outlet, have a proper outlet installed by a qualified electrician. This appliance is designed for use on a nominal 120-voltcircuit, and has a grounding attachment plug that looks like the plug in the drawing above. Make certain that the appliance is connected to an outlet having the same configuration as the plug. No plug adapter should be used with this appliance.

3

w w w. b i s s e l l . c o m

8 0 0 . 2 3 7 . 7 6 9 1

Product view

Heat

Indicator Light

Formula &

Water Tank

Power Button

Power Cord

Quick Release™

Cord Wrap

Portable Spot

Cleaning Release

Pedal

Edge Sweep®

Brushes

Upper Handle

Carry Handle

Flex Hose

Dirty Tank

Removeable

Nozzle

4 w w w. b i s s e l l . c o m

8 0 0 . 2 3 7 . 7 6 9 1

Product view

Tool Storage

Hose Secure

Latch

Cleaning fluid

Spray Trigger

Cord Clip

Support Handle

Tool Storage (some models)

Recline Pedal

WARNING:

 

To reduce the risk of fire

 

and electric shock due to

 

internal component

 

damage, use only BISSELL

 

cleaning fluids intended

 

for use with the deep

 

cleaner.

 

 

Keep plenty of genuine BISSELL 2X formula on hand so you can clean and protect whenever it fits your schedule. Always use genuine BISSELL deep cleaning formulas. Non-BISSELLcleaning solutions may harm the machine and will void the warranty.

BISSELL

BISSELL

BISSELL

BISSELL

BISSELL

BISSELL

BISSELL

2X

2X Fiber

2X Pet Stain

2X Allergen

2X Natural

2X Lavender

Tough

Professional

Cleansing

and Odor

Cleansing

Orange

Essence

Stain

Deep

Formula with

Formula with

Formula

Formula

Formula

PreCleaner

Cleaning

Scotchgard

Scotchgard

 

 

 

 

Formula with

Protection

Protection

 

 

 

 

Scotchgard

5

Protection

w w w. b i s s e l l . c o m

8 0 0 . 2 3 7 . 7 6 9 1

Assembly

Your deep cleaner comes in two easy to assemble components:

1.Upper handle

2.Portable spot cleaner/Base

The only tool you will need to assemble your cleaner is a Phillips screwdriver.

1.Slide upper handle onto base

2.Screw the four included screws into the marked holes.

Note: two of the holes are located underneath the support handle indicated by graphics. Angle screwdriver to secure into place.

3.Wrap power cord around Quick Release Cord Wrap.

4.Wrap flex hose around the hose wrap and secure with hose secure latch.

5.Snap attachment(s) into the back of unit.

1. 2.

1.

Screw Holes

2.

Warning:

Do not plug in your cleaner until you have completely assembled it per the above instructions and are familiar with all instructions and operating procedures.

6 w w w. b i s s e l l . c o m

8 0 0 . 2 3 7 . 7 6 9 1

Operations

Special features

Innovative cleaning technology

This innovative deep cleaner offers two machines in one. The upright deep cleaner uses the power of heat, brushes and cleaning formula to get deep down dirt for a maximum clean. The portable spot cleaner detaches to clean tough spots and stains and hard to reach areas.

Hot water heater

This deep cleaner features a patented built-inhot water heater which will heat the hot tap water you put in to safely optimize cleaning effectiveness. The heater temperature is limited to prevent carpet damage. The heater automatically turns on when you turn the machine on. This operates only in upright cleaning mode.

Scotchgard™ Protector

Carpet protection applied at the mill typically wears down over time from heavy foot traffic and everyday cleaning, including deep cleaning. To help restore this important protection, only BISSELL offers deep cleaning formulas with Scotchgard protector. This offers extra protection against dirt and tough stains to keep your carpets looking good longer.

To maintain your Scotchgard 5-yearlimited stain warranty, you do not need to hire a professional. By using your BISSELL deep cleaner with BISSELL 2X formulas containing Scotchgard protector every 12 months, your carpet warranty from 3M remains in effect. No other home deep cleaning system can do this for you. Refer to the Scotchgard Protector warranty for details.

Pedal Graphic

Tip:

For easy carrying, grab the carry handle portable spot cleaner and balance with the handle on the back of the machine.

7

w w w. b i s s e l l . c o m

8 0 0 . 2 3 7 . 7 6 9 1

Operations

Before you clean

1.Move furniture to another area if cleaning an entire room (optional).

2.Vacuum area with a dry vacuum cleaner thoroughly before deep cleaning.

3.Pretreating (optional):

3a. Pretreating is recommended to improve cleaning effectiveness for heavily soiled carpet in high traffic areas such as entryway and hallways.

3b. BISSELL Tough Stain precleaner

Spray the BISSELL Tough Stain precleaner formula onto heavy traffic areas, soiled areas or stains.

Allow to penetrate for at least 3 minutes.

Clean as normal, using the deep cleaner in upright mode, following the instructions below.

Upright cleaning mode

Filling formula & water tank

1.Remove tank from the base of the machine by lifting up tank carry handle.

Note: This tank was designed with a flat bottom so it can be easily filled.

2.Unscrew the black cap and remove bottle insert.

3.Fill tank with hot tap water to the water fill line. Add two ounces of BISSELL 2X formula to the tank.

4.Replace the bottle insert in the tank and tighten the black cap. Replace the tank on the deep cleaner.

Cleaning

1.Plug into a proper outlet and press the power button. Allow 1 minute for the hot water heater to warm-upbefore cleaning.

2.While pressing the trigger, make one slow forward wet pass and another one back.

ATTENTION:

Some Berber carpets have a tendency to fuzz with wear. Repeated strokes in the same area with an ordinary vacuum or deep cleaner may aggravate this condition.

3b.

1.2.

8 w w w. b i s s e l l . c o m

8 0 0 . 2 3 7 . 7 6 9 1

Operations

Upright cleaning mode continued

Cleaning continued

 

 

 

 

 

 

3.

forward and backward pass over the same

 

CAUTION:

 

Release the trigger and make one slow

 

 

 

 

area. Repeated passes will help aid in dry

 

Do not overwet. Take care not

 

 

 

to run over loose objects or

 

 

time.

 

 

 

 

edges of area rugs. Stalling

 

4.

Continue passes until cleaning area is

 

 

 

brush may result in premature

 

 

complete.

 

 

 

 

belt failure.

 

 

Note: Your machine may be equipped

 

 

 

 

 

 

 

with a circuit breaker that will auto-

 

 

 

 

matically shut off the brush if a large

Tip:

 

or loose object is caught in the brush

 

roll. If that happens, be sure to unplug

 

your machine, remove the foreign

Make only one trip to the sink

 

object, and then plug the machine

by removing the entire por-

 

back in to reset the circuit breaker.

table cleaner. Fill and empty

Empty dirty tank

in the same trip.

1.When the dirty tank reaches the “FULL” line on the tank it is time to empty.

2.Remove dirty tank and carry to a utility

sink, toilet or outside (where you will

2.

3.

4.

dispose of the dirty water).

 

 

 

3.To unlock the dirty tank lid, rotate handle over the back of the tank. Remove lid and pour out dirty water. Rinse out dirty tank to remove any debris.

4.Replace top of tank, and rotate the handle forward to lock in place on front of tank.

Cleaning your machine

1.Flush out machine of any remaining residual solution.

Fill the formula & water tank with hot tap water and turn on your machine.

Recline handle and press the spray trigger for about 15 seconds while making forward and backward passes on carpet. Continue without pressing the trigger until there is no more water being suctioned up.

Turn off the machine and wrap the powercord. Make sure the dirty tank and the formula & water tank are emptied, rinsed, and dried before the next use.

Before you replace tank, clean all debris from red filter screen.

WARNING:

To reduce the risk of fire, electric shock, or injury, turn power OFF and disconnect plug from

electrical outlet before performing maintenance or troubleshooting.

Tip:

For best results empty, rinse and dry both tanks before storing.

9

w w w. b i s s e l l . c o m

8 0 0 . 2 3 7 . 7 6 9 1

Operations

Upright cleaning mode continued

Cleaning your machine continued

2.Rinse front nozzle of any dirt and debris.

Remove portable spot cleaner from the base of the machine.

Unscrew three screws with Phillips screw driver and remove nozzle.

Rinse nozzle out at the faucet.

Place back onto the machine by hooking the tabs into the holes on the bottom sides of the machine. Secure with screws.

3.The inside of the end caps can be wiped out with a clean paper towel, or for a more thorough clean, the end

caps can be taken off and rinsed clean.

4.Any loose hair or debris can be pulled from the brush rolls and thrown away. For a more thorough clean, follow directions on page 15 for removal of brush rolls. Your machine is now ready to be stored.

Note: Store cleaner in a protected, dry area. Since this product uses water, it must not be stored where there is a danger of freezing. Freezing will damage internal components and void the warranty.

WARNING:

To reduce the risk of fire, electric shock or injury unplug from outlet before servicing.

2.

Tip:

Let all parts dry completely and replace onto machine.

10 w w w. b i s s e l l . c o m

8 0 0 . 2 3 7 . 7 6 9 1