ZTE MF633 User Manual

ZTE USB Modem

User Manual

Contents

1 Modem Introduction .................................................... 4

1.1 Introduction .......................................................... 4

1.2 Warning and Notice .............................................. 4

1.3 Declaration ........................................................... 5

1.4 Applicability Scope .............................................. 8

1.5 System requirements ........................................... 8

1.6 Functions .............................................................. 8

1.7 Specification ........................................................ 8

2 Installation ................................................................... 10

2.1 Outline and Parts ................................................ 10

2.2 Hardware Installation ........................................ 10

2.3 Software Installation .......................................... 12

2.4 Run the Application Software ............................ 15

2.5 Hardware Uninstall ............................................ 16

2.6 Software Uninstall .............................................. 17

3 Functions & Operation ............................................. 19

3.1 Interface introduction ........................................ 19

3.1.1 Main Interface ....................................................... 19

3.1.2 Description of Mini Icons ..................................... 22

3.2 Connecting Internet ........................................... 23

3.3 SMS ..................................................................... 26

3.3.1 Read Short Message .............................................. 28

3.3.2 Create new message .............................................. 28

3.3.3 Operating Guide .................................................... 30

3.4 PhoneBook .......................................................... 32

3.4.1 Creating a new contact .......................................... 33

3.4.2 Modifying contacts ................................................ 34

3.4.3 Deleting contacts ................................................... 34

3.4.4 Sending SMS to a contact ..................................... 35

3.4.5 Searching for a contact .......................................... 35

2

3.5 Settings .............................................................. 35

3.5.1 Connection Settings .............................................. 36

3.5.2 Security Settings.................................................... 38

3.5.3 Network Settings ................................................... 39

3.5.4 Message Settings ................................................... 41

3.5.5 Alert settings ......................................................... 43

3.6 MicroSD card ...................................................... 43

3.7 Help ..................................................................... 44

4 FAQ & Answers ........................................................... 45

3

1 Modem Introduction

1.1 Introduction

Thank you for using ZTE MF633 USB Modem.

To guarantee the modem always in its best condition, please
read this manual carefully and keep it for further use.

The pictures, symbols and contents in this manual are just for
your reference. They might not be completely identical with your
modem. We operate a policy of continuous development. We
reserve the right to update the technical specifications in this
document at any time without prior notice.

The ZTE MF633 USB modem is a multi-mode 3G USB modem,
working in HSPA/UMTS/EDGE/GPRS/GSM networks. With
USB interface connecting to a laptop or a desktop PC, it
integrates the functionality of a modem and a mobile phone
(SMS), and combines mobile communication with Internet
perfectly. It supports data and SMS services through the mobile
phone network, enabling you to communicate anytime and
anywhere.

1.2 Warning and Notice
To the owner

 Some electronic devices are susceptible to electromagnetic

interference sent by modem if inadequately shielded, such as
electronic system of vehicles. Please consult the
manufacturer of the device before using the modem if
necessary.

 Operating of laptop and desktop PC and modem may

interfere with medical devices like hearing aids and
pacemakers. Please always keep them more than 20
centimeters away from such medical devices when they are
turned on. Turn the modem off if necessary. Consult a

4

physician or the manufacturer of the medical device before
using the modem.

 Be aware of the usage limitation when using a modem at

places such as oil warehouses or chemical factories, where
there are explosive gases or explosive products being
processed. Therefore, turn off your modem if required.

 Don’t touch the inner antenna area if not necessary.

Otherwise it will affect your modem’s performance.

 Store the modem out of the reach of little children. The

modem may cause injury if used as a toy.

Modem

 Please use original accessories or accessories that are

authorized. Using any unauthorized accessories may affect
your modem’s performance, and violate related national
regulations about telecom terminals.

 Avoid using the modem near metallic structure device or

establishment that can emit electromagnet wave. Otherwise it
may influence receiving signals.

 The modem is non-waterproof type, please keep it dry and

store in shady and cool place.

 Don’t use the modem immediately after a sudden

temperature change. In such case, it will produce dew inside
and outside the modem, so don’t use it until it becomes dry.

 Take the modem carefully. Don’t lose, bend or cause it struck.

Otherwise it will lead to destruct damage.

 No dismantling by non-professional and only qualified

maintainer can undertake repair work.

1.3 Declaration

Radio Frequency (RF) Energy

This model MF633 meets the government’s requirements for
exposure to radio waves.

This device is designed and manufactured not to exceed the
emission limits for exposure to radio frequency (RF) energy set
by the Federal Communications Commission of the U.S.
Government:

5

The exposure standard for wireless devices employs a unit of
measurement known as the Specific Absorption Rate, or SAR.
The SAR limit set by the FCC is 1.6W/kg. *Tests for SAR are
conducted using standard operating positions accepted by the
FCC with the device transmitting at its highest certified power
level in all tested frequency bands. Although the SAR is
determined at the highest certified power level, the actual SAR
level of the device while operating can be well below the
maximum value. This is because the device is designed to
operate at multiple power levels so as to use only the poser
required to reach the network. In general, the closer you are to a
wireless base station antenna, the lower the power output.

The highest SAR value for the model device as reported to the
FCC when worn on the body, as described in this user guide, is

1.17 W/kg (Body-worn measurements differ among device
models, depending upon available enhancements and FCC
requirements.)

While there may be differences between the SAR levels of
various devices and at various positions, they all meet the
government requirement.

The FCC has granted an Equipment Authorization for this model
MF633 with all reported SAR levels evaluated as in compliance
with the FCC RF exposure guidelines. SAR information on this
model is on file with the FCC and can be found under the Display
Grant section of http://www.fcc.gov/oet/fccid after searching on

FCC ID: Q78-ZTEMF633.

For body worn operation, this modem has been tested and
meets the FCC RF exposure guidelines for use when plugged
into a laptop PC, positions the handset a maximum of 0.5 cm
from the body. Use of other enhancements may not ensure
compliance with FCC RF exposure guidelines.

6

FCC Compliance

z This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2)
this device must accept any interference received,
including interference that may cause undesired
operation.

z This device has been tested and found to comply with the

limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates uses and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following
measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for
help.

Caution:

Changes or modifications not expressly approved by the party
responsible for compliance could void the user‘s authority to
operate the equipment.

z The antenna(s) used for this transmitter must not be co-located

7

or operating in conjunction with any other antenna or
transmitter.

1.4 Applicability Scope

ZTE USB Modem supports the present mainstream types of
laptops and desktop PCs, such as HP, IBM, Toshiba, Lenovo,
Dell, Sony, etc.

1.5 System requirements

Operating System：Windows 2000 / XP / Vista
Configuration (Recommended):

CPU 1GHz Pentium or above
Hard Disk 50M or above
RAM 512M or above

The performance of the modem may be influenced if
configuration is under the recommended requirement.

1.6 Functions

Functions: SMS service, data service, applied management,
data concurrence, support MicroSD card etc.

1.7 Specification

Interface Type USB2.0

Systems supported Supports most types of laptop and desktop PC.

Operating systems

supported

8

Windows 2000, XP SP2, Vista

MAC OS

SMS service, Data service, Applications

Functions

Network Standards HSPA/UMTS/EDGE/GPRS/GSM

Transmission speed

(Max)

Temperature

Dimension 85 mm×25 mm×9.6 mm

Weight About 30g

management, Data concurrent, support MicroSD

card, etc.

HSUPA 2.0Mbps UL

HSDPA 7.2Mbps DL

Storage: -20°C ~ +60°C

Operation: -10°C ~ +55°C

T-Flash capability Support up to 4GB MicroSD card

9

2 Installation

2.1 Outline and Parts

The following figure shows the appearance of the MF633. It is
only for your reference. The actual product may be different.

1. USB Connector

2. Indicator

3. Back Cover

4. MicroSD card slot

5. SIM/USIM card slot

2.2 Hardware Installation

Note: Before the hardware installation, please make sure that
your (U)SIM supports data service, GPRS, EDGE, UMTS or
HSPA etc. If you have questions on this, please consult your
service supplier.

1. Slide the back cover and remove it.

10

2. Insert the SIM/USIM card into the SIM/USIM card slot

Insert the SIM/USIM card with the metal contact area facing
downwards into the slot, shown as the following picture.

3. Insert the MicroSD card into the MicroSD card slot
Note: Only MicroSD card is supported by the modem and do not

use other memory card in the modem.
Insert the MicroSD card into the memory card slot, if you want to

use it. Make sure the metal contact side of the memory card
facing downwards, shown as the following picture.

4. Close the back cover

11

5. Connect the Modem to your laptop or desktop PC

Rotate the USB connector and plug the USB connector into
your computer’s USB port. Make sure that it is tightly inserted.
The OS automatically detects and recognizes new hardware
and starts the installation wizard.

2.3 Software Installation

The system will automatically detect and recognize the new
hardware and display the new icon in the desktop status bar,
indicating that the computer and the USB Modem have been
connected properly. After a few seconds, there will show the
following installation interface.

Note: If the system does not launch installation automatically,
you can run the installation program in path of My Computer >
ZTEMODEM > Install.exe.

The following installation interface will show how to install the
software.

12

z Recommend you to exit other programs, and then click

“Next”.

z Read the agreement carefully. If you agree, choose “I

accept the terms of the license agreement”, and then click
“Next”.

13

z Select the folder that you want to install the software by

pressing “Change”, and then click “Next”.

z The system show the installation progress, wait a minute

and the following screen will show up:

14

z Click “Finish” to complete the installation.

Note：If you have problems with installation after the upper

operation, please contact the service provider.

After the installation, select the “Start → Programs” and there
will be a “MODEM Mobile Connection” program group，which
includes “MODEM Mobile Connection” and “Uninstall”. There
will be a Shortcut icon like below on the desktop.

2.4 Run the Application Software

After the modem is correctly connected, click the “Start →
Programs → MODEM Mobile Connection →MODEM Mobile
Connection” menu on the laptop or desktop PC to run the

application software.

15

Or double click the shortcut icon, to run the application software.

After modem initialized, main interface appears. When the

standby icon

appears in the taskbar, the modem can work

properly.

2.5 Hardware Uninstall

Close the software application then remove the hardware
following the procedure below.
z Firstly click the “close” button on the menu, and then click

“OK” to close the software.

z Then remove your USB Modem safely.
When you use a MicroSD card in the modem:

z Please left click the icon

in the Windows system tray
bar. Then a menu will popup and indicates the USB devices
list as below:

z Select “Safely remove the USB disk” which is relevant to

the MicroSD card.

z Pull out the USB modem directly, if you want to disconnect

the modem from the laptop or desktop PC.

16

2.6 Software Uninstall

z Close the application program before the software

uninstalls.

z Click “Start→ Programs → MODEM Mobile Connection

→ Uninstall” menu on the laptop or desktop PC.

z Click “Yes” according to the indication, then the system

begins to uninstall programs.

17

z Click “Finish” to complete the application software

uninstall.

18

3 Functions & Operation

3.1 Interface introduction

3.1.1 Main Interface

The starting screen of the USB Modem software is shown as the
following:

The whole interface is divided into three parts. Related functions
can be executed by operation in the related areas.

1. Function button area:

There will show various function button icons. Select different
function button and it will carry out corresponding operation.

19

Internet: Connect to the Internet.

Short Message (SMS): Send SMS or read SMS.

PhoneBook: Save and view the different information of

the contacts.

Settings: Set normal relative information for the

modem.

Help: Show the help information.

2. System information area:

Show the system status and different kinds of tips.

Icon

Explanations

The icon indicates the network signal
intensity. There are 6 stages from none
to the strongest.
The icon indicates there are new SMS at
present.

The icon indicates the current status of
Internet connection is not connected.

The icon indicates the current status of
Internet connection is already connected.

Letter “ P ” means supporting
packet-switch （ P ） service, letter “C”
means supporting circuit-switch （ C ）

service.
SIM/USIM card is in status of roaming.

20

Icon

Explanations

The icon indicates insert status of the
modem. Green means it has been
inserted into the computer.

The icon indicates insert status of the
modem. Red means it has not been
inserted into the computer.

The icon indicates insert status of the
modem. Yellow means it has been
inserted into the computer but in offline
status.

The icon indicates insert status of the
SIM/USIM card to the modem. Green
means the card has been inserted.

The icon indicates insert status of the
SIM/USIM card to the modem. Red
means it has not been inserted.

The icon indicates the current network
type, i.e. EDGE or GPRS,
HSDPA/HSUPA service.

Name of the current service provider.
View related information for your internet

operation, such as, user name, start time,
disconnect time, duration, data received
and data sent.

3. User Area:

Show the man-computer interaction information under various
conditions.

21

3.1.2 Description of Mini Icons

When click the mini button, the software will minimize as an icon

on the system taskbar. If connected to the Internet, the

minimized software won’t influence the download of data or

receiving SMS. When the application window is minimized, the

system icons will display on the taskbar. Double click the icon to

resize the display.

1. Taskbar Icons Description：

The USB Modem has been inserted into the computer.

The USB Modem is not inserted into the computer.

The USB Modem is offline.

UIM/SIM card is not inserted.

No network signal.

There is a new message.

The USB Modem is ready to connect to Internet.

The Internet is already connected.

2. The uses of Tray Icons：

Right Click the tray icons, the following menu will appear:

22

Device Offline/ Device Online: Pause/reusing the working of
the modem. If connected Internet, you need disconnect the
Internet first, and then select the Device Offline.

Factory Settings: Restore all the settings to the original values
in the USB modem. This operation just affects the settings in the
USB modem and do not change any software settings in the
laptop or desktop PC.

Help: Enter the USB modem software help.
About: View the information of the application software and

hardware versions.

Exit: Close the software and stop the modem from working.

3.2 Connecting Internet

You can browse web pages after you have accessed to Internet
with the help of modem, you can also receive SMS when surfing
in the Internet.

1. Connect to the Internet:

Click the Internet icon. The system will ask you “Connect ?”.
Click Connect to connect the Internet.

23

When connected, there is a status bar in the bottom of the user
area which shows “State: connected to …”, and the user area
will show data amount, connected time and so on. Then you can
access Internet and receive email etc through network.

24

You can click “Disconnect” to stop the connection when the
“Connect” 'button becomes “Disconnect” button,

2. Internet connection records:

Click “Internet connection records”
the log of Internet connection history.

25

to check

3.3 SMS

Note: To ensure that the Short Message can be used properly,
at first, you should setup the correct Short Message center
number. Refer to section “3.5.4 Message Settings”.

Click the “Short Message” icon to switch to the SMS interface
and it will show the number of messages in the inbox, outbox
and draftbox. The user can click icons of “Inbox”, “Outbox”,
“Draftbox” and “New Message” to enter relative interface.

26

Inbox: Save the received messages.
Outbox: Save the successfully sent messages.
Draftbox: Save the editing SMS which haven’t been sent. The

drafts can only be saved in computer, not USIM/SIM.

New Message: Write a new message.

For example: “Message in Inbox PC : 1 Item(s) (U)SIM Card: 4

Item(s)” means: The PC side has one short message and there
are four short messages in the Inbox of the SIM card , “(U)SIM
Card capability:40Item(s)” means the SIM card can hold 40
short messages. Different SIM/USIM cards will have different
capacities. The modem will show the capacity automatically in
usage, like the above “40”. For more information, please contact
with your service supplier.

27

3.3.1 Read Short Message

Click the “Inbox” button on the main interface or click new
message icon on the system taskbar to read the SMS saved in
the box.
You can use the buttons under the menu to execute reading,
forwarding, deleting, saving contact functions and so on.

3.3.2 Create new message

Click New Message, and input the recipient’s number and
message content.

28

The recipient’s number can be input directly or by entering the
phonebook to select one/more/group records.
The recipient’s amount can be one or more. Please use “;” to
separate recipients.
The SMS content can include 160 individual English characters
(including English symbols). There will show total characters on
the interface.
Click “Send”, the prompt screen like bellow will appear on the
interface.

29

Click Yes, and then the edited short messages will be sent.
After sent successfully, the SMS will be saved into outbox
automatically. If send fails, it will be saved to the draft box
automatically.

Send SMS while browse the web:

When surfing the Internet, if your network supports, you can
send short messages at the same time. Click “Short Message”
button icon, enter the short message interface to send short
messages normally.

3.3.3 Operating Guide

Enter any of the Inbox/Outbox/Draftbox to execute the
following functions:

30

Read: Read all the information of short messages. (The content
of short messages, sender’s phone number, delivered date and
time)
Reply: Reply short messages to the sender (Can not be
executed in OutBox / DraftBox).
Forward: Send the short message to other recipients (Can not
be executed in DraftBox)..
Move: Change the saving location of short messages between
PC or USIM/SIM card (Can not be executed in DraftBox).

Delete: Delete the selected short messages.
Save: Save sender’s number into the phonebook.
Cancel: Return to the SMS interface.

Make use of “Ctrl”or “Shift”key and click to choose several
messages to execute simultaneously.

31

New message can not be received when the USIM/SIM card is
full of short messages (Different USIM/SIM cards have different
capacities). While new message can not be saved, the system
will indicate the inbox is full and prompt user to clear the inbox at
USIM/SIM card side.

3.4 PhoneBook

Click the ”PhoneBook” icon to access to the phonebook window,
the phonebook information can be saved in the PC or SIM/USIM
card and you can choose the save position. Each record
includes contact name, mobile phone number, home phone
number, office phone number, email and the group name which
it belongs to.

32

3.4.1 Creating a new contact

1) Click New → New Contact.

2) Select Save position to decide where you want to save your
contact, PC or (U)SIM card.

3) Input the name, phone number, Email address, etc. Then
click OK.

33

3.4.2 Modifying contacts

1) Select a contact and then double-click it or click “Edit”.

2) After the modification, click “OK”.

3.4.3 Deleting contacts

1) Select one or more contacts and then click “Delete”.

2) At the prompt, click “Yes”.

34

3.4.4 Sending SMS to a contact

1) Select one or more contacts and then click “SMS”.

2) You will access in the writing SMS window automatically, the
selected contact mobile phone numbers will be listed in the
receiver column.

3) Enter the contents of the message and then click “Send”.

4) At the prompt, click “Yes” to send the SMS.

3.4.5 Searching for a contact

1) Enter the search conditions in the search condition blank.

2) Click Search to begin searching.

3) The searching results will display in the contacts window.

3.5 Settings

Click “Settings” icon to switch to the settings interface. It
includes: Connection settings, Security settings, Network
settings, Message settings and Alert settings.

Note: all the necessary settings have been correctly saved in
your USB modem. There is no need to change these default
settings.

35

3.5.1 Connection Settings

To ensure that the modem can connect the Internet properly,
you should configure the connection information first.

1. Button description

Add: Add new configuration file.
Delete: Delete the selected configuration file.
Edit: Edit the selected configuration file.
Set default: Select one configuration file from the list, and set it

as the current using files.

36

2. Config File

Click “Add” to add new connection information to the system.
The “Config File” interface will appear:

The configuration information includes: Config Filename, Dial
Number, User name, Password, APN, DNS, and PDP address.
If network supports “Obtain server address automatically”, the
modem can obtain the assigned IP information automatically. If
network does not support it, you should input the proper address
manually. Please consult the network supplier of SIM/USIM card
for all above information. The configuration information may be
various according to the different network suppliers and network
types.

37

3.5.2 Security Settings

1. Enable the PIN Code

When “PIN enable” item is selected, please enter PIN code to
use the modem and you can click “Change PIN” to modify the
number.

2. Backup Phonebook, Internet connection records
and SMS of PC

Click “Backup” to backup the Phonebook, SMS and Internet
connection records in PC.
Click “Resume” to restore the backup data.

38

3.5.3 Network Settings

1. Select Network

Automatic: The system selects the network automatically by
the user’s selected rules and the network status.
Manual: The network is selected by users themselves.

2. Network Mode Select

Automatic: The system will search valid network automatically.
UMTS Only: The system will only search UMTS network.
GSM Only: The system will only search GSM network.

39

3. Manual Select

When the “Manual” is selected, click the “Apply” button, pop-up
the following window:

Wait a minute, the supplier list will show in the window and the
suppliers with the blue or green icon can be selected. Select a
proper network to connect.

40

Select the network that the supplier is utilized to serve your
USIM/SIM and press “Select” to attach the network.

3.5.4 Message Settings

41

Message Center: Set the corresponding SMS center number.
You must input the correct SMS center number to use the SMS
properly and the number will be provided by the network
supplier. Please enter the country code before the number.

Validity period: Set the time limit for saving SMS in the network
side. (This function needs network supports.)In option： 12
hours/A day/A week/The longest period. The default setting is
the longest period permitted by the network.

Location of Saving New SMS: Select “Default” to save in

location set by network. Select “(U)SIM Card” to save in
USIM/SIM card; select “PC” to save in laptop or desktop PC.
Delivery Report: Set as “Turn On” or “Turn Off”. When it is set
as “Turn On”, the network will inform you of the status for the
sent messages.

42

3.5.5 Alert settings

You can set “Connect alert, Disconnect alert and Incoming SMS
alert” by yourself. These alerts will sound on the PC side. The
audio file supports MP3、WAV、WMA and MIDI format. If you
select “Mute”, you cannot hear corresponding alert.

3.6 MicroSD card

If you use MicroSD card in your modem, your computer will
display a removable disk related to the MicroSD card. You can
use this disk freely as you want.
If you want to pull out the modem, please uninstall the

43

removable disk first. For more details, please refer to section
“Hardware Uninstall”.

3.7 Help

Click “Help” icon, and switch to the help interface. Under the
help topic, you can get the USB Modem information about
function introductions, installation and usage guide, etc

44

4 FAQ & Answers

When you meet the following problems in service, please refer
to the following answers to solve it. If the problems still exist,
please contact with your service supplier.

Problem

Description

The system can
not run the
installation
program
automatically.

After the full
installation, the
system doesn’t
install the driver

Possible Causes Problem Solving

The system
configuration is not
suitable for the auto
run.

The system
configuration is not
suitable for the auto
run.

Open the visual
disc of the modem
program and start
the autorun.exe.
If you have installed
the other version of
installation program
please uninstall it
firstly.
Please install the
driver program
manually. The
driver program can

program properly.

The ZTE
application
software can not
run normally

The configurations
have some errors.

45

be found in the
installation location:
C:\Program Files\
MODEM Mobile
Connection\drivers
Run the installation
again. Select
Modify or Repair to
correct the errors.

Problem

Description

Possible Causes Problem Solving

After the modem
is plugged in, the
modem program
doesn’t run
automatically.

After restarted
the computer,
there is no signal.

The system
configuration is not
proper.

1. The position of
the USB Modem
inner antenna is
unfitting.
2．You are in the
place where no
GSM/GPRS/EDGE/
UMTS/HSPA

Please open the
modem program
manually. You can
find it in the Start→
Program menu or
the shortcut on the
desktop.
1．Adjust the angle
and position of the
USB Modem.

2. Change to the
places where the
signal is in good
condition.

When the USB
Modem has been
plugged in,
computer cannot
find the USB
Modem.

network covered ,
such as
underground
parking lot, tunnel
etc.

1. The installation
programs of the
USB Modem
haven’t been
installed properly.

2. The modem isn’t
inserted well.

1. Run the
installation program
first then connect
the device. Now
install the drivers as
normal in Windows.

2. Restart the
computer, or insert
the modem again.

46

Problem

Description

Possible Causes Problem Solving

Message sent
failed.

Date connection
failed.

3. The USIM/SIM
card isn’t inserted
well, such as
inserted in reverse.

1. The SMS center
number isn’t
correct.

2. The network is
busy .

1. You are in
the place where no
GSM/GPRS/EDGE/

3. Insert the
USIM/SIM card
correctly again.

1. Consult your
service provider for
the correct number.
Then configure the
right number in
Message settings.

2. Try later.

1. Change to the
place where there
is good signal.

UMTS/HSPA
network covered，
such as
underground
parking lot, tunnel
etc.

2. The network at
this time in this
place is busy now.

3. The APN in the
configuration files is
error.

2. Try later.

3. Check the APN
in the configuration
file in the
“Connection
settings”.

47

Problem

Description

Possible Causes Problem Solving

Connected to the
Internet, but it
cannot open any
website page.

4. The modem data
is error.

5. The network type
selected by manual
is wrong.

1. After connection,
there is no data
transfer, which
resulted that you
can not open web

4. It is perhaps the
GPRS or UMTS
network problem
and please contact
with the local
supplier in time.

5. Select the correct
network according
to the type of the
USIM/SIM card.

1. Check that the
APN in the
Configuration files
is correct or not.

pages.

2. The IE browser
gets problems.

2. If the IE gets
problems, upgrade
to the new version
or reinstall the IE
browser.

48

Problem

Description

Possible Causes Problem Solving

3. The operating
system is infected
by virus (Such as
Worm Blaster
which can take up a
quantity of upload
data flow and result
that it can’t receive
downloaded data
flow so that you
cannot open any
website.)

4. You have
connected to other
APN. which cannot
connect to the

3. Use the
professional
anti-virus software
to check and kill the
virus in the
operating system
completely.

4. Contact with your
service supplier for
help.

Internet.

The Modem can
not connect to the
Internet in other
places

Your USB Modem
is not permitted to
roam in your
network.

No warning tone 1. No audio card is

fixed in computer or
the volume is too
small.

2. If you select
“Mute”, you cannot
hear corresponding
alert.

Contact with your
service supplier for
help.

1. Check the audio
card and adjust the
volume properly.

2. Check the Alert
Settings to make
sure the “Mute” is
not selected.

49

Problem

Description

Possible Causes Problem Solving

My MicroSD card
can not read or
not found

Check the MicroSD
card capacity, the
maximum
supported capacity
is 4GB

Use another
MicroSD card with
a maximum
capacity of 4GB

50