ZIRCON StudSensor Pro User guide

StudSensor™Pro finds the edges of studs and joists

1

up to 1

⁄2inches (38 mm) deep.

Key Features

• Finds both wood and metal studs

®

• DeepScan

• Patented TruCal

• Bright LEDs and audio indicators

• Tough for jobsite use

mode

®

instant calibration

™

StudSensor

Pro

Electronic Stud &

Joist Locator

Applications

Find the edges of wood or metal studs or joists to:

• Hang cabinets and shelves securely

• Hang pictures and mirrors

• Install ceiling fans and chandeliers

• Install drapery rods and closet organizers

• Install plant hangers, towel bars, etc.

The

ZIRCON

• Uses a patented sensor that pinpoints the
edges of wood or metal studs behind walls,
floors, or ceilings.

• DeepScan mode for extra-thick surfaces—up

1

⁄2inches (38 mm) of drywall, paneling,

to 1
or plywood, or a combination of them, and
through most bare wood flooring.

• Calibrates instantly for immediate use.

• Bright LEDs and an audio signal indicate
stud edges.

• Made to withstand daily jobsite use.

Advantage

www.zircon.com

PATENTED

PATENTED

StudSensor™Pro Technical Information

®

Dimensions 5.54 in. H x 2.33 in.W x 1.18 in. D

(141 mm x 59 mm x 30 mm)

Weight 2.3 oz. (65 g) without battery

Battery type 9-V alkaline (not included)

Position accuracy Stud Scan mode: typically within

dual scan and mark procedure
DeepScan mode: typically within
dual scan and mark procedure

3

Depth Typically up to

Typically up to 1
NOTE: Sensing depth and edge detection can vary due to
moisture content of materials, wall texture, paint, etc.

Operating temperature 20° to 120°F (-7° to 49°C)

⁄4in. (19 mm) in Stud Scan mode

1

⁄2in. (38 mm) in DeepScan mode

1

⁄8in. (3 mm) using the

3

⁄16in. (5 mm) using the

Storage temperature -20° to 150°F (-29° to 66°C)

Humidity 80% RH (noncondensing)

Water resistance Splash and water resistant, not waterproof

Order Information Part Number UPC

StudSensor

™

Pro 58050 0 42186 58050 1

®

TruCal
Instant
Calibration

DeepScan

Over-the­Stud
Warning

Ergonomic
Design

®

©2002 Zircon Corporation • Col #0518 Rev A (05/02)

1580 Dell Avenue
Campbell, CA 95008-6992
Tel: [phone] or 408-866-8600
Fax: [phone]

E-mail: [e-mail]