Zephyr RC-0001, ZMLE42BG, ZVOM90AG, ZMOM90AS, ZMIM90BS, ZMLE42BS, ZMDM90AS, ZVNM90AG, ZNAM90CS, ZVEE42CS User Manual

Loading...

2277 Harbor Bay Pkwy

Alameda, CA 94502 1.888.880.8368

RC-0001 DCBL Remote Installation Instructions

! CAUTION: Hood must be disconnected from main power prior to performing the conversion instructions listed below. Failure to do so could result in personal injury or damage the hood.

 

 

 

1. Locate Main PC Board on top of blower

Inclided Materials: 1 Remote Module w/antenna

wire, 1 Remote control, 1 Remote control holder,

housing of hood body. Remove (4) Main

1 battery, 2 screws.

PC Board cover screws.

 

 

 

A

 

B

2. Remove Main PC Board from PC Board box. Use

3. Disconnect black switch cable A from Main PC

board and connect it to the Remote Module terminal.

caution when removing Main PC Board as to not

Connect white cable B from Remote Module to Main

disconnect any wires

PC board switch terminal.

4. Install Remote Module into Main PC Board box by (2) screws.

5. Re-install Main PC Board into PC Board box. Be sure blue antenna wire from Remote Module is outside of PC Board box. Turn to page

2 for remote synchronization & features.

Page 1

+ 1 hidden pages