Quick Guide
ZM-VE350
www.ZALMAN.com
Ver. 150518
Please read this Manual before use
All manuals and user guides at all-guides.com
all-guides.com
1
.COM
1. Precautions
3. System Requirements
■ We are not responsible for any damages due to improper use, except installation
error or normal use.
■
performance.
■ Avoid inserting objects into the device.
■ Keep device away from heat sources, direct sunlight, oil, and humid environment.
■ Do not let the device be wet. It may not be covered by Warranty.
■ It may have problem if used near magnetic objects.
■ Exterior damage during use is not covered by Warranty.
■ Do not turn on / off PC while device is connected to PC. It may cause device
disorder or error.
■ CPU: Intel Pentium / 350 MHz or above compatible CPU
■ OS: Windows 2000/XP/vista/7/8/8.1, Linux 2.6 or later, Mac OS X 10.0 or later
Case Material Aluminum Alloy, Acryl, Poly Carbonate
Weight 96g
Dimensions 135.3(L) x 78.6(W) x 13.1(H)mm
Interface USB 3.0
USB 3.0 CableScrew Driver & Bolts 2pcs
ZM-VE350 Pouch Quick Guide
4. Components
Quick Guide
All manuals and user guides at all-guides.com
2
.COM
5. Mounting a 2.5” HDD
2.5” HDD
2.5” HDD
1
3
2
4
6. Names of Parts
Backup Button
Access LED
LCD Display
Jog Switch
USB3.0 Port
Serial Number
All manuals and user guides at all-guides.com
3
.COM
7. Connecting to PC
Connect device to PC’s USB3.0 port using enclosed USB3.0 cable.
When disconnecting, please use “Hardware Safety Removal” on tray of the O/S.
8. Display and Icon
9. Using Jog Switch
HDD Mode
H
Read & Write Enabled
PC connection status
USB2.0 or USB3.0
List display
D
NAME.ISO
Menu display
D
Mode Selesct
Dual Mode
VCD Mode
Write Protected
D
Stand by Mode
D
STAND BY MODE
D
NAME.ISO
All manuals and user guides at all-guides.com
4
.COM
10. Menu Description
■ Enter into menu mode if Jog switch is pressed for 3 seconds.
■ If you wants to use the backup software for MS O/S, you can download the
software via Zalman web page(www.zalman.com)
(1) Main Menu
Mode Select > Device Mode setting
Information > Check HDD information and firmware information
Disable Write Protection / Enable Write ProtectionW-Protection >
Exit > Menu Exit
Exit > Menu Exit
(2) Mode Select (“ν”is shown in selected mode)
Dual Mode Both of external HDD and CD-ROM are recognized
VCD Mode ExternalCD-ROM is recognized. (Useful when OS installing)
HDD Mode External HDD is recognized.
(Useful when connecting other devices except PC)
(3) Information
HDD Temp > Hard disk SMART information
HDD Health >
Display HDD health info (Good, Bad)
- If bad is shown is shown, please check HDD
carefully after
backup data.
HDD Model Name
> ------
Firmware Ver. >
Display device firmware version
All manuals and user guides at all-guides.com
5
All manuals and user guides at all-guides.com
all-guides.com
Loading...