Page 1
Page 2
※
The specifications of any product may change without prior notice to improve performance.
1
▣ Contents
1. Precautions
2. Components
3. Specifications
4. Features
5. Operation Guide
6. More Cool Innovations
1. Precautions
1) Do not insert fingers into an operating fan.
2) Do not spill liquids on this product.
3) Do not insert impurities into or block the top/bottom Air Vents.
4) Use on a stable and balanced surface.
5) Keep this product away from places exposed to direct sunlight, heat sources, humidity, and dust.
6) Do not drop or exert excessive force on this product.
7) Check the components list and condition of the product before installation. If there is a problem,
contact the place of purchase to obtain a replacement or refund.
Page 3
※
The specifications of any product may change without prior notice to improve performance.
2
2. Components
3. Specifications
1) Materials : Pure Aluminum, ABS
2) Weight : 1,460 g
3) Dimensions : 318 (L) X 400 (W) X 42.5 (H) mm
4) Noise : 18.0 dBA ~ 25.5 dBA ± 10 %
5) Input Voltage : 5 V (Connects with Notebook USB Port)
6) Fan
- Type : Centrifugal Fan
- Quantity : Two
- Bearing Type : Hypro
- RPM : 1,100 rpm ~1,500 rpm ± 10 %
1) ZM-NC2000 Main Components
2) Accessory's
USB Cable
User’s Manual
Page 4
※
The specifications of any product may change without prior notice to improve performance.
3
4. Feature
1) ZM-NC2000 Main Components
(2) USB Cable Compartment
USB Ports
Fan RPM Control
Power Switch
Power LED
Riser
USB Port
Page 5
※
The specifications of any product may change without prior notice to improve performance.
4
5. Operation Guide
1) The ZM-NC2000 is powered by USB connection to a notebook computer using the included
USB Cable.
2) The unused USB port of a ZM-NC2000 that is connected to a notebook computer can be used for
indirectly connecting a USB device to the notebook computer.
3) The lifespan of heat-sensitive LCD panels in notebook computers can be increased by using the
ZM-NC2000 to cool the keypad area before shutting the notebook.
4) The fan rpm of a ZM-NC2000 can be adjusted to the user’s preference.
(Even an rpm setting below the mid-range provides sufficient cooling for the notebook.)
1. The power consumption of a USB device that will be connected to the remaining USB
port of ZM-NC2000 must NOT exceed 1.9 watt.
2. The “ “ mark on the Fan RPM Control indicates the mid-range rpm.
3. When operated at low fan rpm settings, the ON/OFF status of ZM-NC2000 may not be
audibly distinguishable, requiring a visual confirmation through the Power LED’s
ON/OFF status.
4. When storing the ZM-NC2000, preventing the accumulation of dust in the vents and
inlets will maintain optimal sanitary and performance conditions.
5. Notebook computers with relatively thick rubber feet increase the distance between the
notebook computer and the ZM-NC2000, facilitating enhanced airflow and cooling performance.
Note )
USB Cable
ZM-NC2000
USB Device
or
USB Device
Page 6
※
The specifications of any product may change without prior notice to improve performance.
5
Noiseless systems with stable performance can be built with Zalman’s cooling components,
Enclosures, and accessories.
6. More Cool Innovations
CNPS 9700
CPU Cooler
VF1000 LED
VGA Cooler
VNF100
Fanless VGA Cooler
ZM-MFC1 Plus
Fan Controller
ZM-STG1
Super Thermal Grease
Noiseless Case Fans
HD160 Plus HD160XT Plus HD135
Computer Noise Prevention Systems
Home Theater PC Enclosures
Z-MACHINE GT900 Z-MACHINE GT1000 TNN 300
Tower PC Enclosures
Loading...