Yamaha RX-V1075, RX-A1030 Easy Setup Manual

AV Receiver/Ampli-tuner audio-vidéo

CA

English

Français

Easy Setup Guide

Manuel de configuration rapide

*One of the above is supplied depending

on the region of purchase.

*The supplied power cable

varies depending on the
region of purchase.

AV Receiver

Easy Setup Guide

English

1 Preparation

Accessories

Check that the following accessories are supplied with the product.

 Remote control  Batteries

 AM antenna  FM antenna  YPAO microphone

(AAA, R03, UM-4) (x2)

Insert the batteries the right way round.

This document explains how to set up a 5.1- or 7.1-channel system and
play back surround sound from a BD/DVD on the unit.

To reduce the impact on natural resources, the Owner’s Manual for this product is
supplied on CD-ROM. For more information about this product, refer to the
Owner’s Manual on the supplied CD-ROM.

PDF versions of this guide and “Owner’s Manual” can be downloaded from the
following website.
http://download.yamaha.com/

 Power cable  CD-ROM

(Owner’s Manual)

 Safety Brochure  Easy Setup Guide

Cables required for connections

The following cables (not supplied) are required to build the system described in this
document.

• Speaker cables (depending on the number of speakers)

• HDMI cable (x2)

• Audio pin cable (x1)

• Digital optical cable or stereo pin cable (x1*)

* Not required if your TV supports ARC (Audio Return Channel)

En 1

2 Placing speakers

12

39

45

10° to 30°10° to 30°

45

1

2

39

67

0.3 m (1 ft) or more

10° to 30° 10° to 30°

Set up the speakers in the room using the following diagram as a reference.

For information on other speaker systems, refer to “Owner’s Manual”.

5.1-channel system

7.1-channel system

1 Front speaker (L)
2 Front speaker (R)
3 Center speaker
4 Surround speaker (L)
5 Surround speaker (R)
6 Surround back speaker (L)
7 Surround back speaker (R)
9 Subwoofer

2 En

3 Connecting speakers/subwoofer

FRONT

– (black)

+ (red)

FRONT

Banana plug

1

2

ZONE OUT

CENTER

SUBWOOFER

ZONE 2

ROUND SUR. BACK

SPEAKERS

CENTER FRONTSURROUND BACKSURROUND

BI–AMP

ZONE 2/F.PRESENCE/

R L R R RL L L

SINGLE

PRE OUT

SUBWOOFER

CENTER

FRONT

SURROUND SUR. BACK

(SINGLE)

EXTRA SP

12

3

45

9

The unit (rear)

1

2

ZONE OUT

CENTER

SUBWOOFER

ZONE 2

ROUND SUR. BACK

SPEAKERS

CENTER FRONTSURROUND BACKSURROUND

BI–AMP

ZONE 2/F.PRESENCE/

R L R R RL L L

SINGLE

PRE OUT

SUBWOOFER

CENTER

FRONT

SURROUND SUR. BACK

(SINGLE)

EXTRA SP

12

3

45

9

The unit (rear)

• Under its default settings, the unit is configured for 8-ohm
speakers. When connecting 6-ohm speakers, set the unit’s
speaker impedance to “6  MIN”. For details, see “Setting the
speaker impedance” in “Owner’s Manual”.

• Use a subwoofer equipped with built-in amplifier.

• Before connecting the speakers, remove the unit’s power cable
from the AC wall outlet and turn off the subwoofer.

• Ensure that the core wires of the speaker cable do not touch
each other or come into contact with the unit’s metal areas. This
may damage the unit or the speakers. If the speaker cables
short circuit, “Check SP Wires” will appear on the front display
when the unit is turned on.

■ Connecting speaker cables

Speaker cables have two wires. One is for connecting the
negative (–) terminals of the unit and the speaker, and the
other is for the positive (+) terminals. If the wires are
colored to prevent confusion, connect the black wire to
the negative and the other wire to the positive terminals.

a Remove approximately 10

mm (3/8”) of insulation
from the ends of the
speaker cable and twist
the bare wires of the cable
firmly together.

b Loosen the speaker terminal.

c Insert the bare wires of the cable into the gap on the side

(upper right or bottom left) of the terminal.

d Tighten the terminal.

Using a banana plug

a Tighten the speaker

terminal.

b Insert a banana plug into

the end of the terminal.

+

b

-

b

d

a

c

aa

+

Connect the front speakers (1/2)

1

to the FRONT (//\) terminals.

Connect the center speaker (3) to the

2

CENTER terminal.

En 3

3

1

2

ZONE OUT

CENTER

SUBWOOFER

ZONE 2

ROUND SUR. BACK

SPEAKERS

CENTER FRONTSURROUND BACKSURROUND

BI–AMP

ZONE 2/F.PRESENCE/

R L R R RL L L

SINGLE

PRE OUT

SUBWOOFER

CENTER

FRONT

SURROUND SUR. BACK

(SINGLE)

EXTRA SP

The unit (rear)

1

2

ZONE OUT

CENTER

SUBWOOFER

ZONE 2

ROUND SUR. BACK

SPEAKERS

CENTER FRONTSURROUND BACKSURROUND

BI–AMP

ZONE 2/F.PRESENCE/

R L R R RL L L

SINGLE

PRE OUT

SUBWOOFER

CENTER

FRONT

SURROUND SUR. BACK

(SINGLE)

EXTRA SP

12

3

45

9

Audio pin cable

The unit (rear)

1

2

ZONE OUT

CENTER

SUBWOOFER

ZONE 2

ROUND SUR. BACK

SPEAKERS

CENTER FRONTSURROUND BACKSURROUND

BI–AMP

ZONE 2/F.PRESENCE/

R L R R RL L L

SINGLE

PRE OUT

SUBWOOFER

CENTER

FRONT

SURROUND SUR. BACK

(SINGLE)

EXTRA SP

67

12

3

45

9

The unit (rear)

Connect the surround speakers
(4/5) to the SURROUND (//\)
terminals.

12

Connect the subwoofer (9) to the

4

SUBWOOFER PREOUT (1) jack.

• Use a subwoofer equipped with built-in amplifier.

For 7.1-channel system

Connect the surround back speakers
(6/7) to the SURROUND BACK (//\)
terminals.

9

3

45

4 En

4 Connecting external devices

INPUT

MAIN ZONE

VOLUME

PURE DIRECT

(1 BD/DVD)

AV 1

HDMI OUT

ARC

(ZONE OUT)

12

HDMI

HDMI

OPTICAL

L

R

OPTICAL

AUDIO 1

(2 TV)

5

L

R

L

R

O

O

HDMI

HDMI

HDMI

a

d

c

HDMI

b

TVAudio out (digital optical or

analog stereo)

HDMI in HDMI out

BD/DVD player

HDMI OUT 1

jack

HDMI (AV 1) jack

AUDIO 1
(OPTICAL or AUDIO) jack

The unit (rear)

To an AC wall
outlet

Turn on the unit

The unit (front)

Press the bottom of the
front panel door gently to open the door

5V

0.5A

PHONO

(1 BD/DVD)

GND

L

R

1

NETWORKDC OUT

( 3

)

NET

AV 3 AV 4AV 2AV 1

AV OUT

(2 TV)

OPTICAL4OPTICAL3COAXIAL2COAXIAL

5

OPTICAL

ANTENNA

(4 RADIO)

AM

FM

75Ω

HDMI OUT

AV 1 AV 2 AV 3 AV 4 AV 5 AV 6 AV 7

12

MONITOR OUT/
ZONE OUT

6

ARC

(ZONE OUT)

YPB PR

AV 1

A

AV 2

B

AUDIO 4

AUDIO 3AUDIO 2AUDIO 1

COAXIAL

(1 BD/DVD)

COMPONENT VIDEO

MULTI CH INPUT

SURROUND SUR. BACK

YPB PR

AV 3

AV 4

CENTER

SUBWOOFER

R

HDMI

C

MONITOR OUT/ZONE OUT

YPB PR

D

ZONE OUT

PRE OUT

ZONE 2FRONT

FRONT

SURROUND SUR. BACK

SPEAKERS

L R R RL L L

SINGLE

(SINGLE)

REMOTE

IN OUT

CENTER FRONTSURROUND BACKSURROUND

SUBWOOFER

Connect external devices to the unit.

1

a Connect a BD/DVD player to the unit with an HDMI

cable.

If the BD/DVD player is currently connected to the
TV directly with an HDMI cable, disconnect the
cable from the TV and connect it to the unit.

b Connect a TV to the unit with the other HDMI cable.

c Connect a TV to the unit with a digital optical cable

or a stereo pin cable.

This connection is required to play back TV audio
on the unit. This connection is not required if your
TV supports ARC (Audio Return Channel).

d Connect the supplied power cable to the unit and

then to an AC wall outlet.

RS-232C

TRIGGER

OUT

1

2

12V 0.1A

1

2

CENTER

ZONE 2/F.PRESENCE/
BI–AMP

EXTRA SP

AC IN

• For information on how to connect radio antennas or other
external devices, see “PREPARATIONS” in “Owner’s Manual”.

Turn on the unit, the TV and the BD/DVD

2

player.

Use the TV remote control to change the

3

TV input to video from the unit.

The connections are complete. Proceed to the next
page to optimize the speaker settings.

• By connecting a TV to the unit with an HDMI cable, you can
configure the unit’s settings with the menu displayed on the TV. In
addition, you can select the on-screen menu language from English
(default), Japanese, French, German, Spanish, Russian, Italian and
Chinese. For details, refer to “Owner’s Manual”. In this guide,
illustrations of English menu screens are used as examples.

En 5