YAMAHA MOTIF XS Editor User Manual

MOTIF XS Editor

Owner’s Manual

Contents

What is the MOTIF XS Editor?.................................................2

Studio Manager ........................................................................2

Studio Connections .................................................................2

About Open Plug-in Technology .............................................3

Data Structure of the MOTIF XS Editor...................................4

Starting the MOTIF XS Editor ..................................................5

An Example of MOTIF XS Editor in Use .................................6

MOTIF XS Editor Window.......................................................12

Basic Operations....................................................................34

Menu ........................................................................................36

Troubleshooting .....................................................................52

• Copying of the commercially available music sequence data and/or digital audio ﬁles is strictly prohibited except for your personal use.

• The software and this owner’s manual are exclusive copyrights of Yamaha Corporation.

• Copying of the software or reproduction of this manual in whole or in part by any means is expressly forbidden without the written consent of the manufacturer.

•Yamaha makes no representations or warranties with regard to the use of the software and documentation and cannot be held responsible for the results of the use of this manual and the software.

• The screen displays as illustrated in this Owner’s Manual are for instructional purposes, and may appear somewhat different from the screens which appear on your computer.

• The company names and product names in this Owner’s Manual are the trademarks or registered trademarks of their respective companies.

• Click on the red-colored text to jump to the related item in this manual.

This owner’s manual assumes that you are already familiar with basic Windows/Macintosh operations. If you are not, please refer to the owner’s manual which came with your Windows/Macintosh software before using the MOTIF XS Editor. For information about hardware requirements, the interconnection of devices and the installation of the MOTIF XS Editor software, refer to the separate Installation Manual as well as the Owner’s Manual for the respective MIDI device.

MOTIF XS Editor Owner’s Manual 1

What is the MOTIF XS Editor?

MOTIF XS Editor is a convenient tool which lets you edit and save the various parameters of your MOTIF XS tone generator. These include Voice and Mixing parameters (edited in the Voice or Mixing mode of the MOTIF XS) such as Volume, Pan, EG, and Cutoff and other settings. Thanks to its easy-to-understand graphical interface, you can edit various parameters of the MOTIF XS right from your computer—using the mouse to adjust the virtual knobs, sliders, and buttons and entering values from the computer keyboard. Finally, all the changes you have made can be saved to your computer or transmitted to the MOTIF XS instrument. You can use this MOTIF XS Editor as a plug-in for the software below

• Studio Manager

•DAW application software compatible with Studio Connections

Studio Manager

Studio Manager V2 is a cross-platform application that enables you to start multiple Editors for controlling Yamaha hardware products remotely, and to save multiple Editor settings. You can run Studio Manager as a stand-alone application, or as a plug-in within DAW applications compatible with Studio Connections such as Cubase 4 or Cubase AI 4. For more information, refer to the Studio Manager PDF manual.

Studio Connections

Studio Connections is a joint project begun by Steinberg and Yamaha. Music production systems now increasingly rely on both software and hardware, and there is a pressing need for closer integration between the two. Studio Connections provides a comprehensive and seamless music production environment—making the use of hardware and software both easier and much more efﬁcient. The following functions are available in Studio Connections.

Recall

With the Recall function, all settings in each Editor can be saved within Studio Manager, and then called up again when needed. This enables you to recall all the settings of multiple devices from Studio Manager and control the entire system easily, instantly and automatically.

When executing the Recall function in the Studio Manager, the parameter settings of either device (MOTIF XS or DAW software on a computer) are synchronized with the other. You can determine which device (MOTIF XS or DAW software) is regarded as the master of the parameter settings by setting the Auto Sync Setting (page 40).

Recall is especially convenient when used with a DAW application compatible with Studio Connections. This lets you save the Editor data directly to the project ﬁle of the DAW letting you recall all necessary hardware settings automatically by simply opening the project ﬁle.

MOTIF XS Editor Owner’s Manual

About Open Plug-in Technology

Audio Integration

Plug-in software such as software synthesizers and software samplers are exceptionally convenient in that they let you easily change the various settings and parameters within the host application. However, control over hardware is not so easy—with the need for various setups such as audio connections, driver settings and MIDI port connections. By using a Studio Connections-compatible DAW software, you can control the external hardware synthesizer within the application, without the need to set up complex connections within a DAW software application— just as easily and conveniently as you would with plug-in software. The Audio Integration function makes all this possible. For details about Recall and Audio Integration, visit our web site at:

http://www

.studioconnections.org/

About Open Plug-in Technology

Open Plug-in Technology (OPT) is a software format that enables you to control MIDI devices from a music DAW application software. For example, this allows you to start up and operate various parts of your music system, such as voice editors of the synthesizer and mixing control editors—directly from an OPT-compatible software, without having to use each separately. OPT also makes it unnecessary to set MIDI drivers for each application, streamlining your music production system and making all operations more convenient and seamless. In addition to the original OPT, Open Plug-in Technology Version 2 (OPT 2), designed for Studio Connections, is also available. The host application Studio Manager supports OPT 2.

About the OPT 2 Overview

OPT 2 is a plug-in format that enhances OPT Level 1 (Panels) and adds some convenient functions for Studio Connections.

Host

Application

Studio

Manager

OPT2

Editor

Plug-in software compatible with OPT 2 is indirectly connected to the DAW application compatible with Studio Connection, via the Studio Manager.

MOTIF XS Editor Owner’s Manual

Data Structure of the MOTIF XS Editor

The MOTIF XS Editor lets you create the following data and save them as a single ﬁle (extension: X0E).

• Current Global data (latest status of edited global parameters)

• Current data in the Voice mode (latest status of edited Voice)

• Current data in the Song/Pattern mode (consisting of Mixing setup, latest status of edited Voice and 16 Mixing Voices)

• User Voice data (consisting of three Normal Voice Banks and one Drum Voice Bank)

Current settings includes the latest settings of the Common and Element parameters for the Voice last assigned to each of Parts 1 – 16, as well as Mixing parameter settings such as Voice assignment, pan, volume and effect for each Part. Among the Voice Banks, only the Mixing Voice Bank data belongs to the Current settings. The MOTIF XS Editor lets you edit parameters (including Element parameters) of the Voice assigned to each Part and save the latest edit status as a ﬁle without storing it as a User Voice or a Mixing Voice. This means that you can easily recall the latest status of the previous edit simply by opening the ﬁle.

n The MOTIF XS Editor handles the Global data which includes some of the parameters shown on the “G” row in the Mixer

section and all the parameters in the Global Settings of the Parameter Category section (pages 20 and 23).

The diagram illustrated below indicates the structure of the data created via the MOTIF XS Editor, the structure of the data stored in the internal memory of the MOTIF XS instrument and the relationship between those two types of data.

Data sync

Current Global data

Current data in the Voice mode

Current data in the Song or Pattern mode

• Multi Common data

Part Voice data

(16 Voices)

Store Voice*2 (page 47)

Mixing Voice data

(16 Voices)

Current Global data

Current data in the Voice mode

Current data in the Song or Pattern mode

• Multi Common data

Part Voice data

(16 Voices)

MOTIF XS Editor (computer)

Store Voice (page 47)

User Voice data

• Normal User 1 (128 Voices)

• Normal User 2 (128 Voices)

• Normal User 3 (128 Voices)

• Drum User (32 Voices)

Store Voice (page 47)

MOTIF XS instrument

Store Global

Store Voice

Store Voice (page 47)

Store Mixing

Store Voice

(page 47)

(page 48)

(page 47)

Global data

User Voice data

• Normal User 1 (128 Voices)

• Normal User 2 (128 Voices)

• Normal User 3 (128 Voices)

• Drum User (32 Voices)

Mixing data

• Multi Common data

Mixing Voice data

(16 Voices)

Editor ﬁle

(Extension: .X0E)

*1 When the MOTIF XS instrument is connected to the computer properly with the ONLINE status, editing a parameter on the MOTIF XS Editor affects the same parameter on the MOTIF

XS itself, and vice versa. *2 The Store Voice operation on the Editor will store the Voice data to the memory of the MOTIF XS instrument as well as the memory of the Editor. *3 The Store Global operation and Store Mixing operation will store the data only to the memory of the MOTIF XS instrument.

MOTIF XS Editor Owner’s Manual

Starting the MOTIF XS Editor

Install the driver (USB-MIDI driver or AI driver), Studio Manager and MOTIF XS Editor by following the respective Installation Guides, then install the host application such as Cubase if necessary. After making the required connection and setting the MIDI IN/OUT parameter to “USB” or “mLAN” in the Utility mode, follow the instructions below to start the MOTIF XS Editor.

n For details about connection between the MOTIF XS and a computer, refer to the Owner’s Manual of the MOTIF XS.

1. Start the Studio Manager.

Studio Manager can be started as a plug-in within a Studio Connections-compatible DAW software, or can be started as a stand-alone application.

2. Set the MIDI Ports.

When starting Studio Manager as a stand-alone application:

Set the MIDI Ports by calling up the MIDI Por ts window via [File] → [Setup] ([SM2] → [Preference] for Mac)

→

[MIDI Settings]. When the connection is done via a USB cable, enter the checkmarks to the boxes of Por ts 1 and 4 for the MOTIF XS in both the Input Ports and the Output Ports, as illustrated below. When connection is made via the IEEE1394 cable, enter checkmarks to the boxes of the Por ts corresponding to the mLAN MIDI In and the mLAN MIDI Out of the MOTIF XS, in both the Input Por ts and the Output Ports.

When starting Studio Manager as a plug-in:

Set the MIDI Ports on the DAW application. For details, refer to the manual of your DAW application. When connecting the MOTIF XS to a computer via a USB cable, the MIDI Ports are automatically set simply by starting Studio Manager from Cubase 4 or Cubase AI 4. This is also true when connecting the MOTIF XS to a computer via an IEEE1394 cable and installing “Extensions for Steinberg DAW” to the computer.

3. Start the MOTIF XS Editor from the window of the Studio Manager.

For details, refer to the Installation Guide and the PDF manual of the Studio Manager. When using Studio Manager as a plug-in with the Audio Integration features of Studio Connections (within a compatible DAW), you can start the MOTIF XS Editor just as you would any other software synthesizer. For details, visit the following web site.

http://www.studioconnections.org/

MOTIF XS Editor Owner’s Manual

An Example of MOTIF XS Editor in Use

There is no single way to use the many components in the MOTIF XS Editor. Your editing needs and preferences may differ; however, the following example gives you a simple step-by-step guide in how to use the MOTIF XS Editor. As an example, this section explains how to edit a Voice in the Voice mode, edit a Mixing program in the Song mode, then store the edited data to the memory of the MOTIF XS instrument and save the ﬁnal results of your editing to a ﬁle.

n If the [Song] or [Pattern] indication (at the top left of the display) is on, perform the instructions below from step 1. If the

[Voice] indication is on, perform the instructions below from step 2.

1. Change the mode to the Voice mode by clicking the [Voice] indication (at the top left

of the display).

If the [ONLINE]/[OFFLINE] indication is set to [ONLINE] before changing the mode, the Auto Sync window will be called up automatically when this step is executed. As step 2 is thus unnecessary, you should proceed to step 3.

2. Click the [OFFLINE] to call up the Auto Sync window if the [ONLINE]/[OFFLINE]

indication is set to [OFFLINE].

3. On the Auto Sync window, set communication-related parameters such as Input Port,

Output Port and Device Number in the Data Port section, then set the direction of Data Auto Synchronization (Global, Current and Voice) in the Auto Sync Setting section.

When you want to use the settings on the MOTIF XS itself as starting data for editing, set the boxes of Global, Current and Voice in the Auto Sync Setting to on so that the data ﬂows from the instrument to the computer. To use the settings on the MOTIF XS Editor as starting data, set both Global, Current and Voice to the opposite, so that the arrow indicates data ﬂow from the computer to the keyboard. For details, see page 39.

CAUTION

Keep in mind that when you set Global, Current and User Voice to On, enable data sync from the computer to the MOTIF XS (instrument), and then click the [Start] button at the bottom, this operation transmits these types of data currently on the Editor to the MOTIF XS itself, automatically overwriting and erasing all the corresponding data already existing on memory of the MOTIF XS instrument. When you want to use the settings on the MOTIF XS itself as starting data for editing, set the boxes of Global, Current and Voice in the Auto Sync Setting to on so that the data ﬂows from the instrument to the computer.

MOTIF XS Editor Owner’s Manual

An Example of MOTIF XS Editor in Use

CAUTION

Regarding the data transfer for synchronization, the setting here takes precedence over that speciﬁed in Studio Manager. Make sure to set the desired data transfer direction, regardless of the setting on the Studio Manager, in order to avoid data loss.

4. From the Auto Sync window, click [Start] at the bottom.

The data synchronization will be started if the Port settings are correct. As soon as data synchronization is completed, the Auto Sync window is closed, then the OFFLINE indication is changed to ONLINE indication automatically. In this ONLINE status, editing a parameter on the MOTIF XS Editor affects the same parameter on the MOTIF XS itself, and vice versa.

5. Edit the Voice in the Voice mode.

5-1 On the “V” row of the Voice section, click the Bank name or Voice name to call up the

VOICE LIBRARY window.

5-2 From the list in the VOICE LIBRARY, select the desired Voice to assign it temporarily to

the current Part.

You can conﬁrm the sound of the selected Voice by clicking any note on the virtual keyboard or the MOTIF XS keyboard.

5-3 Click the Voice name or [OK] at bottom right of the window to close the VOICE LIBRARY

window.

You can cancel the Voice selection by clicking the Close (X) button or [Cancel] button at bottom right of the window. By executing this operation, the Voice selection is reset to the original status and the VOICE LIBRARY window closes.

MOTIF XS Editor Owner’s Manual

An Example of MOTIF XS Editor in Use

CAUTION

When a different Voice has been selected, your edits of the previously selected Voice will be lost. If you want to store the edits, make sure to store the Voice by using the Store window (page 47) before changing the Voice.

5-4 Edit the Voice parameters as desired.

Edit the parameters (EQ, chorus, reverb, etc.) in the “V” row by clicking them.

To conﬁrm how the parameter edit affects the Voice sound, click any note on the virtual keyboard or the MOTIF XS keyboard.

To make detailed settings of the selected Voice, click the arrow button at the top of the right panel next to the main window to call up the Detailed Parameter section.

6. Store the edited settings as a User Voice, as necessary.

6-1 Click [Store Voice] under [Edit] in the menu bar to open the Store window (page 47).

6-2 Select a Voice Bank from the following list:

• Normal User 1

• Normal User 2

• Normal User 3

• Drum User

n Normal User 1 – 3 are shown in the Store window when editing the Normal Voice while Drum User is shown in

the Store window when editing the Drum Voice.

MOTIF XS Editor Owner’s Manual

An Example of MOTIF XS Editor in Use

6-3 Open the selected Bank, select the desired number as destination, then enter the name

of the Voice in the box at the top of this window.

6-4 Click [Store] to store the edited Voice to the selected number in the selected Bank.

Performing this operation will store the Voice data to the User Voice Bank in the MOTIF XS instrument as well as that within the Editor.

CAUTION

When you execute the Store operation, the settings for the destination memory (of both the Editor and instrument) will be overwritten. Select the destination Voice number carefully to prevent important data from being erased accidentally.

n You can store the settings of the parameters in the “G” row by clicking [Store Global] under [Edit] in the menu

bar.

7. Edit the Mixing parameters in the Song mode.

This section explains how to edit a Mixing program in the Song mode.

7-1 Change the mode to the Song mode by clicking [Song] of the [Voice]/[Song]/[Pattern]

indication.

The Auto Sync window appears automatically.

7-2 From the Auto Sync window, click [Start] at the bottom.

Data synchronization will be started if the Port settings are correct. As soon as data synchronization is completed, the Auto Sync window is closed.

MOTIF XS Editor Owner’s Manual

An Example of MOTIF XS Editor in Use

7-3 Edit the parameters of the Mixing and Voice assigned to each Part.

If you want to change the parameter values from the original ones of the selected Song or Pattern, click (drag and drop) each of the parameters such as EQ and effect lined up to the right of “G” in the Global/ Multi section and “1” – “16” in the Part section.

To conﬁrm how the parameter edit affects the Voice sound, click any note on the virtual keyboard.

To make detailed settings of the selected Multi, click the arrow button at the top of the right panel next to the main window to call up the Detailed Parameter section.

n The MOTIF XS Editor lets you edit the Voice parameters in the Song or Pattern mode as well as Voice mode.

In the Voice mode, you can edit only the selected Voice. In the Song or Pattern mode, on the other hand, you can edit the parameters of the Voice assigned to each Part as well as the Mixing parameters. The edited Voice can be stored to the same Voice Bank as a User Voice regardless of the mode used for editing.

MOTIF XS Editor Owner’s Manual

An Example of MOTIF XS Editor in Use

8. Store the edited Voice or a Mixing, as necessary.

8-1 On the MOTIF XS instrument, press the [STORE] button to call up the Mixing Store

window, select the destination, then press the [ENTER] button to store the edited Mixing.

For details, refer to the Owner’s Manual of the MOTIF XS.

n You can store the edited Mixing also by selecting [Store Mixing] under [Edit] in the menu bar. Note that this

operation does not allow you to select the Song as destination and the edited Mixing will be stored to the currently selected Song.

8-2 Select the Part to which the desired Voice is assigned, select [Store Voice] under [Edit] in

the menu bar to call up the Store window (page 47) then store the Voice via the same operations as in steps 6-1, 6-2, 6-3 and 6-4.

9. Select [Save] or [Save As] under [File] on the menu bar to save the edited data as a ﬁle

(extension: *.X0E).

All the settings you made and the Voice data you stored to the User Banks will be saved as a single ﬁle (extension: X0E). When you open this ﬁle next time to call up the Auto Sync window, click [Start] to synchronize the status of the parameter settings between the MOTIF XS Editor and the MOTIF XS instrument.

• When starting the MOTIF XS Editor from Studio Manager, you can save the MOTIF XS Editor data into a Document ﬁle of Studio Manager.

• When using DAW (digital audio workstation) software compatible with Studio Connections and the Studio Manager together, the MOTIF XS Editor data can be saved into a project ﬁle of the DAW.

MOTIF XS Editor Owner’s Manual

MOTIF XS Editor Window

Overall section

1 File, Edit, Bulk, Help

Refer to page 36.

2 Voice/Song/Pattern mode

Determines the mode of the MOTIF XS, Voice, Song or Pattern. As soon as “Voice,” “Song” or “Pattern” is selected here, the mode of the MOTIF XS instrument changes accordingly and the Auto Sync window (page 51) opens. After setting parameters as necessary on this window, click [Start] to execute data synchronization between the MOTIF XS Editor and the MOTIF XS instrument.

MOTIF XS Editor Window: Overall section

3 ONLINE/OFFLINE

Clicking this switches the status of the Editor between “ONLINE” and “OFFLINE.” When “ONLINE” is indicated, the edited status is completely synchronized between the MOTIF XS Editor and the MOTIF XS instrument, meaning that any parameter edit you make on the MOTIF XS Editor is reﬂected in the same parameter on the MOTIF XS instrument and vice versa. When OFFLINE is selected, editing on the MOTIF XS Editor will not affect the MOTIF XS instrument and vice versa even if the MOTIF XS instrument is connected to a computer. Note that the indication here is automatically changed according to the status of communication between the MOTIF XS Editor and the MOTIF XS instrument. For example, the ONLINE status changes automatically to OFFLINE when the cable is disconnected accidentally.

Indicates that the current status is set to ONLINE. Clicking this calls up OFFLINE (2) described below. Keep in mind that the ONLINE indication cannot be enabled when the MIDI Port is not set properly or the MOTIF XS instrument is not properly connected to a computer.

This OFFLINE indication shows that the MIDI Port is set properly and the MOTIF XS is properly connected to a computer. Clicking this calls up the Auto Sync window. From the Auto Sync window, you can synchronize the settings between the MOTIF XS Editor and the MOTIF XS by clicking the [Start] button. As soon as data synchronization is completed, the Auto Sync window is closed and the status of the Editor changes from OFFLINE to ONLINE.

n When the Global, Current and Voice settings are set to “Off” and Auto Start is set to “On” in the Auto Sync

window, clicking here changes the Editor status from OFFLINE to ONLINE without opening the Auto Sync window.

This OFFLINE indication shows that the MIDI Port is not set properly or the MOTIF XS instrument is not connected to a computer properly. Clicking this calls up the Auto Sync window. After making sure to connect the MOTIF XS instrument to a computer, set the MIDI Port properly then click the [Start] button in the Auto Sync window to execute data synchronization between the MOTIF XS Editor and the MOTIF XS instrument. As soon as data synchronization is completed, the Auto Sync window is closed and the status of the Editor is changed from OFFLINE to ONLINE.

MOTIF XS Editor Owner’s Manual

MOTIF XS Editor Window: Mixer section (when the Voice/Song/Pattern is set to “Voice”)

Mixer section (when the Voice/Song/Pattern is set to “Voice”)

1 3

1 Global

This strip lets you edit the main parameters in the Voice mode, such as effect-related ones. Clicking “G” turns this section on as illustrated below.

n When editing any of the Global parameters described below, a small square appears at the top right of the

“G” box until you save the edited data as a ﬁle. This indication is the same as the green [F] indicator (page 25).

Before editing

After editing

Lo, Lo-M, Mid, Hi-M, Hi (Master EQ)

Edits the Master EQ parameters.

Chorus

Selects the Chorus type.

Reverb

Selects the Reverb type.

Master Effect

Tur ns the Master Effect on or off and selects the Master Effect type.

Volume

Adjust the entire volume.

2 [Voice]/[AD/mLAN Part] tab

Selects the Parts to be edited from [Voice] and [AD/mLAN Part]. The illustration below indicates that the [Voice] tab is active.

MOTIF XS Editor Owner’s Manual

MOTIF XS Editor Window: Mixer section (when the Voice/Song/Pattern is set to “Voice”)

3 Voice

When the [Voice] is selected:

Edits the Voice parameters. Clicking the “V” row turns this section on as illustrated below.

n When editing any of the Voice parameters described below, a small square appears at the top right of the “V”

box until you save the edited data as a ﬁle or you store the edited data as a Voice. This indication is the same as the blue [V] indicator (page 28).

Before editing

After editing

Category, Bank, No., Voice Name

Indicates the Category Bank and name of the Voice. When clicking here, the VOICE LIBRARY window appears at the right half section, letting you select a different Voice for editing.

VOICE LIBRARY

3 4

1 Close button

Click this to close this window without applying the changes to the MOTIF XS Editor.

2 [Category]/[Bank] checkboxes

Click either of these boxes to determine whether the Voices listed here are divided into Category folders or Bank folders.

3 [+]/[–] buttons

Click the [+] button to open all the folders so that all Voices appear in all folders. Click the [–] button to close all folders.

4 Folder (Category or Bank)

Click each folder to open or close it.

MOTIF XS Editor Owner’s Manual

MOTIF XS Editor Window: Mixer section (when the Voice/Song/Pattern is set to “Voice”)

5 Voices

Indicates the Voices included in the folder. You can select the Voice temporarily by clicking it. When double-clicking a Voice, the Voice is actually selected and this window closes. You can also copy the Preset Voice(s) and User Voice(s) from the original location to any location in the User Bank by dragging-and-dropping the Voice(s). In the User Bank, you can rearrange the Voices by dragging-anddropping the Voice(s) to a new location. When the Category checkbox is entered, a checkbox is shown at left of each Voice. If you enter checkmarks to the checkboxes of your most-used or favorite Voice, you can call up a list of these Voices on the VOICE LIBRARY by setting the [Favorites] checkbox to on.

n Selecting, copying, pasting or dragging-and-dropping multiple Voices is done in the same way as

normal on your computer OS.

n By right-clicking this section and selecting a menu, you can use the following functions.

• Opening/closing all the folders

• Determining whether the Voices listed here are divided into Category folders or Bank folders.

• Copying/pasting

• Changing the Voice name

• Deleting all the checkmarks of the Favorites checkboxes at left of the Voices

6 Search Box

You can search for your desired Voice by inputting a keyword here.

7 [Favorites] checkbox

By entering the checkmark to this checkbox, you can call up a list of your favorite Voices on the VOICE LIBRARY. You can select your favorite or most-used Voices for this list by entering checkmarks to the appropriate checkboxes (appearing only when the [Category] checkbox is entered) at the left of each Voice.

8 [OK]/[Cancel] buttons

Click the [OK] button to apply the settings and close this window. Click the [Cancel] button to quit without applying the Voice selection.

9 Refresh

When the VOICE LIBRARY is shown in the Editor and you store the Voice(s) on the MOTIF XS itself, the name(s) of the Voice(s) in the VOICE LIBRARY may be different from the Voice name(s) on the MOTIF XS. If this happens, click this button to update the Voice names of the VOICE LIBRARY.

EQ Lo, Mi, Hi (Part EQ)

Adjusts the equalizer settings for the current Voice.

Cho, Rev, Pan (Chorus, Reverb, Pan)

Adjusts the Chorus Send level, Reverb Send level and stereo Pan position for the current Voice by using the graphic knobs.

Volume

Adjusts the volume of the current Voice.

ARP (Arpeggio)

Tur ns Arpeggio playback on or off for the current Voice.

MOTIF XS Editor Owner’s Manual

MOTIF XS Editor Window: Mixer section (when the Voice/Song/Pattern is set to “Voice”)

When the [AD/mLAN Part] is selected:

This section lets you edit parameters for the AD/mLAN Part in the Voice mode. Clicking “AD” or “mLAN” row turns this section on as illustrated below.

Cho, Rev, Pan (Chorus, Reverb, Pan)

Adjusts the Chorus Send level, Reverb Send level and stereo Pan position for the AD/mLAN Part in the Voice mode by using the graphic knobs.

Volume

Adjusts the Volume for the AD/mLAN Part.

Output Select

Determines the speciﬁc output(s) for the AD/mLAN Part.

LCD Output jacks Stereo/Mono

L&R OUTPUT L and R Stereo

asL&R ASSIGNABLE OUTPUT L and R Stereo

m1&2 mLAN OUTPUT 1 and 2 Stereo (1: L, 2: R)

m3&4 mLAN OUTPUT 3 and 4 Stereo (3: L, 4: R)

m5&6 mLAN OUTPUT 5 and 6 Stereo (5: L, 6: R)

m7&8 mLAN OUTPUT 7 and 8 Stereo (7: L, 8: R)

m9&10 mLAN OUTPUT 9 and 10 Stereo (9: L, 10: R)

m11&12 mLAN OUTPUT 11 and 12 Stereo (11: L, 12: R)

m13&14 mLAN OUTPUT 13 and 14 Stereo (13: L, 14: R)

asL ASSIGNABLE OUTPUT L Mono

asR ASSIGNABLE OUTPUT R Mono

m1 mLAN OUTPUT 1 Mono

:: :

m14 mLAN OUTPUT 14 Mono

MOTIF XS Editor Owner’s Manual

+ 36 hidden pages