Xerox DocuPrint N17b, DocuPrint N17 System Administrator Guide

The Xerox

DocuPrint N17 and

N17b Network Laser

Printers

System

Administrator

Guide

Version 1.8

	Copyright © 1998, 1999, Xerox Corporation. All Rights Reserved.
	Copyright protection claimed includes all forms of matters of
	copyrightable materials and information now allowed by statutory or
	judicial law or hereinafter granted, including without limitation, material
	generated from the software programs which are displayed on the screen
	such as styles, templates, icons, screen displays, looks, etc.
	XEROX®, The Document Company®, the stylized X, DocuPrint, N17,
	and N17b are trademarks of Xerox Corporation or its subsidiaries.
	Adobe® and PostScript® are trademarks of Adobe Systems
	Incorporated. This product includes an implementation of LZW licensed
	under U.S. Patent 4.558.302.
	PCL, HP, and LaserJet are trademarks of Hewlett-Packard Company.
	IBM is a trademark of International Business Machines Corporation.
	Microsoft, Microsoft Windows, Microsoft Word, MS, and MS-DOS are
	trademarks of Microsoft Corporation. Univers is a trademark of Linotype
	AG or its subsidiaries. WordPerfect is a trademark of Corel Corporation.
	Centronics is a trademark of Centronics Corporation. Macintosh and
	TrueType are trademarks of Apple Computer, Incorporated. OnPage is a
	trademark of COMPUTER:applications, Inc. All other product names are
	trademarks/tradenames of their respective owners.
	PCL, PCL 5e and PCL 6 are trademarks of Hewlett Packard Company.
	This printer contains an emulation of the Hewlett Packard PCL 5e and
	PCL 6 command languages, recognizes HP PCL 5e and PCL 6
	commands, and processes these commands in a manner comparable
	with Hewlett Packard LaserJet printer products.
Notice	Specifications described in this publication are subject to change without
	notice. Use of some features may be limited by your hardware or
	software configuration. Contact your dealer, Xerox, or Xerox Limited for
	details.

Table of Contents

Chapter 1 DocuPrint N17 Getting Started ...................................	1-1
DocuPrint N17 and N17b Models ....................................	1-2
How Much of This Book Must I Read?............................	1-3
Printer Components .........................................................	1-4
Special Features................................................................	1-5
Power Saver.....................................................................	1-5
High Resolution Printing...................................................	1-5
Postscript .........................................................................	1-6
Edge to Edge Printing ......................................................	1-6
Automatic Tray Switching ................................................	1-6
Automatic Language Sensing and Switching ....................	1-7
Automatic Font/Macro Saving ..........................................	1-7
Secure Printing.................................................................	1-7
Printer Generated Reports................................................	1-8
Duplex Printing ................................................................	1-9
Increased Paper Handling.................................................	1-9
Offsetting ........................................................................	1-9
Memory Expansion ........................................................	1-10

DocuPrint N17/N17b System Administrator Guide TOC-1

Hard Disk Drive Option ..................................................	1-10
Intelligent Rasterizing.....................................................	1-10
Connectivity...................................................................	1-11
Proof Printing.................................................................	1-11
Fax Friendly Black...........................................................	1-12
Flash Memory SIMMs.....................................................	1-12
Memory Considerations ................................................	1-13
Installing the Printer ......................................................	1-15
Selecting a Printer Location ............................................	1-15
Precautions ....................................................................	1-17
Assembling the Printer ...................................................	1-20
Testing the Printer .........................................................	1-24
Installing Printer Options ..............................................	1-26
Maintaining the Printer .................................................	1-27
Cleaning the Printer .......................................................	1-27
Replacing the EP Cartridge .............................................	1-27
Recycling the EP Cartridge..............................................	1-28
Replacing the Fuser Cartridge/Bias Transfer Roll..............	1-28
Transporting the Printer ................................................	1-29
Technical Support...........................................................	1-30
Before Calling for Service ...............................................	1-30
Accessing Xerox Via the Internet ....................................	1-30
Chapter 2 Paper Handling ................................................................	2-1
Paper Sources and Destinations......................................	2-2
Selecting Paper.................................................................	2-3
Storing Paper....................................................................	2-5
Loading Paper...................................................................	2-6
Using Tray 1.....................................................................	2-6
Using the MBF .................................................................	2-9
Using the 500-sheet Paper Deck and Cassette................	2-14
Using the High Capacity Feeder......................................	2-17

TOC-2 DocuPrint N17/N17b System Administrator Guide

Using the Envelope Feeder .............................................	2-20
Automatic Tray Switching .............................................	2-22
Tray Sequence Settings ..................................................	2-23
Paper Handling Exception Conditions .............................	2-24
Tray Sequence Rules ......................................................	2-26
Tray Sequence Examples ................................................	2-27
Paper Size/Type Mismatch..............................................	2-29
Using the Offset Catch Tray ..........................................	2-30
Offsetting Output ..........................................................	2-31
Duplex (Two-Sided) Printing.........................................	2-32
Print Orientation and Control Panel Settings...................	2-33
Chapter 3 Using the Control Panel ................................................	3-1
Control Panel Features.....................................................	3-2
The Display ......................................................................	3-3
The Indicator Lights..........................................................	3-4
The Keys ..........................................................................	3-5
Navigating the Menu System........................................	3-11
Menu Indicators.............................................................	3-13
Control Panel Locks........................................................	3-14
Setting a Menu Option ..................................................	3-15
Main Menu .....................................................................	3-17
Job Menu ........................................................................	3-18
Password Menu..............................................................	3-20
Tray Menu.......................................................................	3-23
PCL Menu ........................................................................	3-30
PostScript Menu .............................................................	3-36
System Menu..................................................................	3-38
Parallel Menu..................................................................	3-49
Serial Menu.....................................................................	3-52
Ethernet Menu ...............................................................	3-56
Token Ring Menu ...........................................................	3-69

DocuPrint N17/N17b System Administrator Guide TOC-3

Novell Menu ...................................................................	3-84
Test Menu .......................................................................	3-91
Reset Menu.....................................................................	3-95
Chapter 4 Printer Management Software and Drivers .............	4-1
Using CentreWare DP with the DocuPrint N17..............	4-2
DocuPrint N17 PCL Printer Driver....................................	4-3
DocuPrint N17 PostScript Printer Driver .........................	4-4
Driver Features .................................................................	4-5
Chapter 5 Using the Hard Disk Drive / Downloading Fonts and Jobs
5-1
Hard Drive Considerations ..............................................	5-2
Disk Initialization..............................................................	5-2
Downloading Fonts and Macros .....................................	5-3
FSDOWNLOAD Command ...............................................	5-4
FSDELETE Command ........................................................	5-7
Using the Hard Disk Drive for Secure and Proof Jobs ...	5-8
Creating Secure Jobs........................................................	5-8
Creating Proof Jobs........................................................	5-10
Printing or Deleting Secure or Proof Jobs........................	5-12
Chapter 6 Troubleshooting .............................................................	6-1
Printer Operation Problems.............................................	6-2
Control Panel Messages...................................................	6-6
Diagnostic LED Flash Sequences ...................................	6-22
Paper Jams ......................................................................	6-23
What Causes a Paper Jam? ............................................	6-23
Clearing Paper Jams .......................................................	6-23
Tray 1 Jam .....................................................................	6-27
MBF Jam........................................................................	6-28
Tray 2 Jam with 500-sheet Paper Deck and Cassette ......	6-29
Tray 3 Jam with 500-sheet Paper Deck and Cassette ......	6-30
Tray 2 or Tray 3 Jam with 2,000-sheet HCF ....................	6-31

TOC-4 DocuPrint N17/N17b System Administrator Guide

Envelope Feeder Jam......................................................	6-32
OCT Jam ........................................................................	6-33
Duplex Module Jam .......................................................	6-34
Paper Exit Jam................................................................	6-35
Print Cartridge Jam ........................................................	6-36
Paper Mismatch Jam ......................................................	6-37
Misfeed Jam at Startup ..................................................	6-38
Fuser Jam.......................................................................	6-39
Print Quality Problems...................................................	6-40
Appendix A DocuPrint N17 Ordering Information .......................	A-1
Appendix B Maintaining the Printer ................................................	B-1
Replacing the EP Cartridge ..............................................	B-2
Replacing the Fuser Cartridge/BTR..................................	B-5
Appendix C Installing and Removing Printer Options .................	C-1
Precautions .......................................................................	C-2
Memory SIMMs ................................................................	C-3
Installing a Memory SIMM ...............................................	C-4
Removing a Memory SIMM..............................................	C-6
Hard Disk Drive ................................................................	C-8
Installing the Hard Disk Drive ...........................................	C-9
Removing the Hard Disk Drive........................................	C-11
Duplex Module...............................................................	C-13
Installing the Duplex Module..........................................	C-13
Removing the Duplex Module ........................................	C-15
500-sheet Paper Deck and Cassette..............................	C-16
Installing One 500-sheet Paper Deck and Cassette .........	C-16
Installing Two 500-sheet Paper Decks and Cassettes ......	C-18
Removing a 500-sheet Paper Deck and Cassette ............	C-21
2,000-sheet High Capacity Feeder (HCF) ......................	C-23
Installing the 2,000-sheet High Capacity Feeder .............	C-24
Removing the 2,000-sheet High Capacity Feeder............	C-27

DocuPrint N17/N17b System Administrator Guide TOC-5

	Offset Catch Tray (OCT) .................................................	C-28
	Installing the OCT ..........................................................	C-28
	Removing the OCT.........................................................	C-31
	Envelope Feeder.............................................................	C-32
	Installing the Envelope Feeder ........................................	C-32
	Removing the Envelope Feeder ......................................	C-35
	Xerox Network Interface Card (XNIC)...........................	C-36
	Installing the XNIC .........................................................	C-37
	Removing the XNIC........................................................	C-39
Appendix D Printer Resident Fonts ..................................................		D-1
	PCL Fonts..........................................................................	D-2
	Printing a PCL Font List.....................................................	D-3
	PostScript Fonts...............................................................	D-4
	Printing a PostScript Font List ...........................................	D-5
Appendix E	Printer Specifications ....................................................	E-1
Appendix F DocuPrint N17 Unique Printer Commands ................		F-1
	Overview ..........................................................................	F-2
	Paper Size Selection .........................................................	F-3
	Paper Type Selection........................................................	F-4
	Input Tray Selection .........................................................	F-5
	Output Selection ..............................................................	F-6
	PJL Commands..................................................................	F-7
Appendix G	Environmental Specifications .....................................	G-1
	The Xerox Commitment to Environmental Quality ............	G-2
	Acoustic Noise Figures .....................................................	G-2
	FCC Compliance Statement for United States Users..........	G-3
	Compliance Statement for International Users..................	G-4
	Operational Safety ...........................................................	G-5
	Laser Safety .....................................................................	G-7
	Laser Safety Warning for Finland and Sweden..................	G-7

TOC-6 DocuPrint N17/N17b System Administrator Guide

DocuPrint N17

Getting Started

DocuPrint N17 and N17b Models ..................................	1-2
How Much of This Book Must I Read? ..........................	1-3
Printer Components .......................................................	1-4
Special Features ..............................................................	1-5
Memory Considerations ..............................................	1-13
Installing the Printer ....................................................	1-15
Testing the Printer .......................................................	1-24
Installing Printer Options ............................................	1-26
Maintaining the Printer ...............................................	1-27
Transporting the Printer ..............................................	1-29
Technical Support .........................................................	1-30

Chapter 1: DocuPrint N17 Getting Started 1-1

DocuPrint N17 and N17b Models

DocuPrint N17

and N17b

Models

This book is for use with both the Xerox DocuPrint N17 and DocuPrint N17b Network Laser Printers. The DocuPrint N17 contains all the components of the DocuPrint N17b, plus the following:

•Ethernet 10Base2 and 10BaseT

•Audible buzzer

As this guide serves both printers, the DocuPrint N17b will hereafter be referred to as the DocuPrint N17 except in situations where information is specific to either printer.

1-2 DocuPrint N17/N17b System Administrator Guide

How Much of

This Book

Must I Read?

How Much of This Book Must I Read?

Because of the customer installable nature of the DocuPrint N17, your printer should be operational following the brief instructions in the Quick Installation Guide (also contained in this chapter).

You can use this guide as a reference for:

Topic		Where to find it
Printer components		This chapter, page 1-4
Special printer features		This chapter, page 1-5
Memory considerations		This chapter, page 1-13
Printer installation		This chapter, page 1-15
Maintenance issues and tips		This chapter, page 1-27
Acceptable print media		Chapter 2: Paper Handling
Using input trays and output bins		Chapter 2: Paper Handling
Using the Control Panel		Chapter 3: Using the Control Panel
Printer drivers and software		Chapter 4: Printer Management Software and Drivers
Using the optional Hard Disk Drive		Chapter 5: Using the Hard Disk Drive / Downloading Fonts and Jobs
Troubleshooting printing problems		Chapter 6: Troubleshooting
Ordering printer options		Appendix A: DocuPrint N17 Ordering Information
Replacing consumables		Appendix B: Maintaining the Printer
Printer option installation		Appendix C: Installing and Removing Printer Options
Printer fonts		Appendix D: Printer Resident Fonts
Printer specifications		Appendix E: Printer Specifications
PCL and PJL commands		Appendix F: DocuPrint N17 Unique Printer Commands

Chapter 1: DocuPrint N17 Getting Started 1-3

Printer Components

Printer

Components

Front View

1Control Panel Display

2Control Panel Keypad

3Recessed Grip

4Power Switch

5Standard Output Bin

6Front Cover

7Front Cover Release Button

8MBF (Multi-bypass Tray)

9MBF Release Point

10Tray 1

Rear View

1Option Interface Cover

2Rear Cover

3Power Inlet

4Ethernet Ports (N17 only)

5Parallel Port

6Serial Port

7Diagnostic LED

8Ethernet LED (N17 only)

9Port for Optional Network Card

The major printer components are indicated below.

Figure 1.1 Major printer components

1-4 DocuPrint N17/N17b System Administrator Guide

Special Features

Power Saver

High Resolution

Printing

Special Features

Several features have been designed into the DocuPrint N17 to enhance your printing environment. Using the printer's Control Panel menu system, you can tailor printer settings to match your printing requirements.

See Chapter 3: Using the Control Panel for more information about the Control Panel and its menu system.

After 60 minutes of inactivity, the printer automatically turns off internal components to reduce the amount of electricity used. The printer automatically turns those parts back on when it receives a print job.

Using the printer's Control Panel menu system, you can send the printer into Power Saver mode after your choice of Off, 15, 30, 60, 90, 120 or 180 minutes of inactivity.

See the section “System Menu” (page 3-38) in

Chapter 3: Using the Control Panel.

The DocuPrint N17 is set to print at 600 x 600 dpi (dots per inch) and can be increased to 1200 x 600. You can also print draft-quality jobs by using the System Menu to set Draft Mode to On (or select it on a per job basis from the printer driver). The printer automatically reduces the amount of toner by 67% (and prints a draft-quality output). Draft Mode can be selected on a per job basis from the Xerox printer drivers.

See Chapter 3: Using the Control Panel for instructions on changing Control Panel settings.

Chapter 1: DocuPrint N17 Getting Started 1-5

Special Features

Postscript

Edge to Edge Printing

Automatic Tray

Switching

Your DocuPrint N17 includes PostScript LanguageLevel 3 (hereafter referred to as PostScript).

Click for Updated Information

You can print PostScript and PCL 5e Emulation and PCL 6 Emulation (hereafter referred to as PCL) jobs all the way to the edge of the page. (However, there is a 4 mm border on all edges, with all paper sizes, where print quality may be slightly degraded.) This feature may be selected via the Control Panel or via the print drivers for PCL. Edge to Edge printing is always enabled for PostScript jobs.

Note that selecting this feature will cause some PCL job printing to be shifted up to the top of the page and left to the edge of the page.

The DocuPrint N17 allows you to set automatic tray switching for both PCL and PostScript jobs. When tray switching is on, and the paper tray runs out of paper, the printer automatically switches to another paper tray (if another tray is loaded with the same size and type of paper). That means you don’t have to load paper as often. You can also install one or two optional 500-sheet Paper Deck and Cassettes (lower trays), or the 2,000-sheet High Capacity Feeder (HCF), to extend your printing capacity.

For more information on tray switching, see the section

“Automatic Tray Switching” (page 2-22) in

Chapter 2: Paper Handling.

1-6 DocuPrint N17/N17b System Administrator Guide

Automatic Language

Sensing and

Switching

Automatic Font/

Macro Saving

Special Features

The printer can process both PCL and PostScript jobs. When the printer's Language Sensing option is on, the DocuPrint N17 samples the incoming data stream to determine which language the print job requires. The DocuPrint N17 then switches to the proper interpreter for that job.

Language Sensing can be set individually for each port, or protocol within a port, by setting the appropriate PDL setting to Auto.

For more information about language sensing and switching, see Chapter 3: Using the Control Panel.

When you are printing both PostScript and PCL jobs, the printer will automatically save downloaded fonts, macros, and the entire PostScript environment when it switches PDLs (Printer Description Language). This saves you from having to download fonts, macros, and headers every time the program switches between PostScript and PCL.

Secure Printing The DocuPrint N17 allows users to define and control what are called “secure jobs.” When a secure job is sent

to the printer, printing is delayed until the password associated with that job is entered at the printer’s Control Panel. Secure jobs are defined and enabled either via DocuPrint N17 printer drivers or via a sequence of PJL commands (see Chapter 5: Using the Hard Disk Drive / Downloading Fonts and Jobs, page 5-8, for an example). This feature requires the Hard Disk Drive option.

Chapter 1: DocuPrint N17 Getting Started 1-7

Special Features

Printer Generated

Reports

Using the printer's Control Panel, you can print seven

separate reports.

•The Demo Page provides a sample of the printer's capabilities and lists the printer's key features.

•The Configuration Sheet lists printer name, software revision level, communication parameters settings, options installed, current option settings in the Control Panel's menu system and print counts.

•The PCL Font List shows which PCL fonts are currently available. The list includes resident fonts, fonts stored on the hard disk and permanent fonts downloaded to system memory.

•The PostScript Font List shows which PostScript fonts are currently available. The list includes resident fonts, fonts stored on the hard disk or downloaded to system memory.

•The Test Print is used by service and repair technicians if problems occur with the printer.

•The Disk Directory lists disk statistics and the directory of the disk file system, including fonts, forms and macros.

•The Menu Map shows the structure of the Control Panel menus.

See Chapter 3: Using the Control Panel for more

information about these reports.

1-8 DocuPrint N17/N17b System Administrator Guide

Duplex Printing

Increased Paper

Handling

Offsetting

Special Features

The DocuPrint N17 can print two-sided documents when you install the optional Duplex Module. After installing the Duplex Module and a DocuPrint N17 printer driver, printing a two-sided document is as easy as printing a one-sided job.

See Appendix A: DocuPrint N17 Ordering Information to order a Duplex Module.

An optional 500-sheet lower tray (the 500-sheet Paper Deck and Cassette), and a 2,000-sheet High Capacity Feeder (HCF) are available for the DocuPrint N17. Install two lower trays and you increase the input capacity for the DocuPrint N17 by 1,000 sheets. One 500-sheet Paper Deck may be installed with the HCF to increase input capacity by 2,500 sheets.

See Appendix A: DocuPrint N17 Ordering Information to order a 500-sheet Paper Deck and Cassette, or the HCF.

The optional Offset Catch Tray (OCT) is available for the DocuPrint N17 to provide a second output destination for your print jobs. Send your print job to the Standard Output Bin or to the OCT (also known as the Offset Bin). It sits above the Standard Output Bin, increases the output tray capacity for the printer and offsets jobs from each other.

See Chapter 2: Paper Handling for more information about using the OCT.

Chapter 1: DocuPrint N17 Getting Started 1-9

Special Features

Memory Expansion

Hard Disk Drive

Option

Intelligent

Rasterizing

The DocuPrint N17 printer has 16 MB of RAM installed as

standard and three SIMM slots for memory expansion.

The three SIMM slots can be populated with

combinations of 4, 8, 16 or 32 MB memory SIMMs up to a

total of 104 MB.

Click for Updated Information

An optional Hard Disk Drive is also available, and is used

for storing fonts, forms and macros, enabling secure and

proof job printing and automatic collation of multiple sets

of a document. See Chapter 5: Using the Hard Disk Drive

/ Downloading Fonts and Jobs for more information about

the Hard Disk Drive. See Appendix A: DocuPrint N17

Ordering Information to order more printer memory or

the Hard Disk Drive.

The DocuPrint N17 driver sends data to the printer only once, regardless of the number of copies specified. This allows multiple sets to be produced at rated printer speeds, conserves valuable network resources and allows users to resume their applications quickly.

Once the data reaches the DocuPrint N17, the printer analyzes the job to determine the amount of memory the rasterized data will require. If there is sufficient memory, it will perform Raster Image Processing (RIP) only once and hold the rasterized pages in memory for use in printing each successive copy.

Intelligent rasterizing is performed automatically by the DocuPrint N17.

1-10 DocuPrint N17/N17b System Administrator Guide

Connectivity

Proof Printing

Special Features

The DocuPrint N17b includes the following physical connectivity interfaces on board:

•IEEE 1284 Bi-directional parallel

•RS232C Serial Interface with a DB9 connector

The DocuPrint N17 contains the two interfaces listed above plus Ethernet (10 Mbit) with RJ45 and BNC connectors.

Two additional interfaces are available as options:

•10/100 Ethernet (10BaseT and 100BaseT) with an RJ45 connector

•Token Ring with RJ45 (UTP) and DB9 (STP) connectors

For DocuPrint N17 printer only: Installing either optional network interface disables the on board 10 Mbit Ethernet interface. Removing either optional interface enables the on board 10 Mbit Ethernet functionality again.

The DocuPrint N17 allows you to view and proofread the first set of a multiple set job before printing the remaining sets. This is called “proof printing.” When you send a proof job to the printer, only the first set is printed immediately. You can then go to the printer and proof the first set. Depending on the outcome of the proofing, you can then decide either to continue printing the remaining sets or to delete the job by entering the password via the printer’s Control Panel.

Proof printing jobs are defined and enabled either via the DocuPrint N17 printer drivers or via a sequence of PJL commands (see Chapter 5: Using the Hard Disk Drive / Downloading Fonts and Jobs, page 5-10, for an example.) This feature requires the Hard Disk Drive option.

Chapter 1: DocuPrint N17 Getting Started 1-11

Special Features

Fax Friendly Black

Typical laser output of continuous tone renderings of color documents loses significant detail when transmitted via conventional fax devices. The DocuPrint N17 printer drivers offer you the option to prepare your output for fax transmission. When you select this driver option, the printer creates a series of cross hatched output patterns that provides more faithful rendering of continuous tones when transmitted via fax.

Flash Memory SIMMs An additional Flash Memory SIMM of 8 MB is available. You can essentially increase resident PCL and PostScript

fonts of the printer or create resident PCL macros by installing up to two Flash Memory SIMMs and downloading resources permanently to this memory. Flash Memory SIMMs are installed in the printer’s SIMM slots in the same way that you install RAM SIMMs. Refer to Appendix C: Installing and Removing Printer Options.

1-12 DocuPrint N17/N17b System Administrator Guide

Memory

Considerations

Memory Considerations

In today's printing environments, technologies have

advanced greatly. Corresponding memory requirements

have increased too. If you plan to print highly complex

jobs, you may need to add printer memory.

The DocuPrint N17 accepts memory SIMMs with the

following specifications:

•8 MB SIMM

—72 pins

—70 nanosecond access time

—No parity

—2M x 32 bits

•16 MB SIMM

—72 pins

—70 nanosecond access time

—No parity

—4M x 32 bits

•32 MB SIMM

—72 pins

—70 nanosecond access time

—No parity

—8M x 32 bits

Chapter 1: DocuPrint N17 Getting Started 1-13

Memory Considerations

Additional memory will provide the following enhanced

DocuPrint N17 capabilities:

•Additional font cache

•Additional download space for fonts, macros and images

•Increased throughput for complex pages, duplex pages and larger paper sizes (Legal/Folio)

•Increased PostScript VM

•Collated sets without the Hard Disk Drive

1-14 DocuPrint N17/N17b System Administrator Guide

Installing the

Printer

Selecting a Printer

Location

Top View

12 in. (50 mm)

220 in. (508 mm)

32 in. (50 mm)

412 in. (305 mm)

5Do not block the fan at the top rear left corner.

Installing the Printer

This section describes the procedures for unpacking and setting up the printer in its base configuration. If you have additional options to install, see Appendix C: Installing and Removing Printer Options for specific instructions for each option.

Select a printer location that meets the minimum air space requirements shown in Figure 1.2. Set the printer on a flat, stable surface away from direct sunlight and electrical interference.

Figure 1.2 Minimum space requirements around the printer

Chapter 1: DocuPrint N17 Getting Started 1-15

Installing the Printer

In selecting a location for the printer, you should also consider the following:

•Is the Control Panel accessible for viewing and use?

•Is there enough clearance above the printer to replace consumables and to add paper handling options?

•The 500-sheet Paper Deck adds 4.8 in. (122 mm) to the height of the printer; the Offset Catch Tray adds 5.2 in. (132 mm); the High Capacity Feeder adds 27 in. (686 mm) and allows placement of the printer with HCF on the floor.

•Is there enough clearance around the printer should it ever require servicing? (If not, you may need to relocate the printer for servicing.)

1-16 DocuPrint N17/N17b System Administrator Guide

Installing the Printer

Precautions Please observe the following precautions for installing and using your DocuPrint N17 printer.

To avoid fire hazard:

•Do not place the printer in a location with high temperature and humidity, poor ventilation, or a high level of dust.

•Do not place the printer near heaters or similar objects.

•Never block the printer’s ventilation openings. Be sure to leave ample space between the ventilation openings and the nearest wall or other surface. (Refer to Figure 1.2 on page 1-15 for space requirements.)

•Do not place the printer near alcohol, benzene, or other volatile and flammable materials.

Chapter 1: DocuPrint N17 Getting Started 1-17

Installing the Printer

To avoid electric shock or fire hazard:

•Do not connect the printer to any power source until you are instructed to do so.

•Do not plug the printer into an AC outlet with incorrect voltage.

•The printer must be properly grounded. Do not bypass the ground plug. Use a three-prong connection.

•Do not use a multi-extension cord connector.

•If using an extension cord, do not use one with rated current less than 125V 15A (250V 13A in Europe). Do not damage or modify the extension cord. Do not bend, pull or place heavy objects on the extension cord.

•Never touch the plug with wet hands.

1-18 DocuPrint N17/N17b System Administrator Guide

Installing the Printer

To avoid printer malfunction or damage:

•Position the printer on a horizontal, sturdy and stable surface.

•Operate the printer under temperature conditions of 10 to 35° C (50to95° F), with humidity 15 to 85%. Be sure to keep the temperature below 28 º C (82° F) if the humidity is 85%.

•If the temperature changes significantly, condensation may develop inside the printer and cause printing problems. Therefore, be sure to let the printer stabilize for some time to adjust to the new temperature.

•Do not subject the printer to direct sunlight.

Chapter 1: DocuPrint N17 Getting Started 1-19

Installing the Printer

Assembling the

Printer

Assembling the printer is easily accomplished in just a few steps:

•Remove packing retainers.

•Install the EP (electronic printing) cartridge,

•Load Tray 1 (and optional paper trays as desired) with paper and insert it into the printer, and

•Connect the power cord.

Follow the instructions on the following pages to assemble the printer.

Do not expose the EP cartridge to direct sunlight or artificial light for more than 15 minutes. Overexposure will permanently damage the photosensitive imaging drum.

Do not open the drum shutter or touch the green imaging drum.

Complete the EP cartridge installation within 15 minutes of removing the cartridge from its package.

1-20 DocuPrint N17/N17b System Administrator Guide

Installing the Printer

1 Remove the protective film from the Control Panel (1). Then open the front cover by pressing the button on top of the cover.

2

3

Remove the orange plastic packing retainers (1,2 and 3).

Remove the EP cartridge from its wrapper.

Chapter 1: DocuPrint N17 Getting Started 1-21

Installing the Printer

4 Shake the EP cartridge several times to evenly distribute the toner.

5 Remove the tape strip.

6 Insert the EP cartridge into the guide channels marked by the arrows inside the front cover. Push in until it clicks in place, then close the front cover.

1-22 DocuPrint N17/N17b System Administrator Guide