•Notices and Safety.............................................................................................................................................................9
•Environmental, Health, and Safety Contact Information .............................................................................. 20
Your printer and the recommended supplies have been designed and tested to meet strict safety
requirements. Attention to the following information ensures the continued safe operation of your
Xerox printer.
1
Xerox® B205 Multifunction Printer
User Guide
8
Notices and Safety
Notices and Safety
Read the following instructions carefully before operating your printer. Refer to these instructions to
ensure the continued safe operation of your printer.
®
Your Xe r ox
include safety agency evaluation and certification, and compliance with electromagnetic regulations
and established environmental standards.
The safety and environment testing and performance of this product have been verified using Xerox®
materials only.
Note: Unauthorized alterations, which can include the addition of new functions or connection of
external devices, can affect the product certification. For more information, contact your Xerox
representative.
printer and supplies are designed and tested to meet strict safety requirements. These
®
Xerox
B205 Multifunction Printer
9
User Guide
Electrical Safety
Electrical Safety
General Guidelines
WARNING:
•Do not push objects into slots or openings on the printer. Touching a voltage point or shorting
out a part could result in fire or electric shock.
•Do not remove the covers or guards that are fastened with screws unless you are installing
optional equipment and are instructed to do so. Power off the printer when performing these
installations. Disconnect the power cord when removing covers and guards for installing
optional equipment. Except for user-installable options, there are no parts that you can
maintain or service behind these covers.
The following are hazards to your safety:
•The power cord is damaged or frayed.
•Liquid is spilled into the printer.
•The printer is exposed to water.
•The printer emits smoke, or the surface is unusually hot.
•The printer emits unusual noise or odors.
•The printer causes a circuit breaker, fuse, or other safety device to activate.
If any of these conditions occur, do the following:
1.Power off the printer immediately.
2.Disconnect the power cord from the electrical outlet.
3.Call an authorized service representative.
Power Cord
Use the power cord supplied with your printer.
•Plug the power cord directly into a properly grounded electrical outlet. Ensure that each end of the
cord is connected securely. If you do not know if an outlet is grounded, ask an electrician to check
the outlet.
WARNING: To avoid risk of fire or electrical shock, do not use extension cords, power strips, or
power plugs for more than 90 days. When a permanent outlet receptacle cannot be installed, use
only one factory-assembled extension cord of the appropriate gauge per printer or multifunction
printer. Always adhere to national and local building, fire, and electrical codes regarding length of
cord, conductor size, grounding, and protection.
•Do not use a ground adapter plug to connect the printer to an electrical outlet that does not have
a ground connection terminal.
®
Xerox
B205 Multifunction Printer
10
User Guide
Electrical Safety
•Verify that the printer is plugged into an outlet that is providing the correct voltage and power.
Review the electrical specification of the printer with an electrician if necessary.
•Do not place the printer in an area where people can step on the power cord.
•Do not place objects on the power cord.
•Do not plug or unplug the power cord while the printer is powered On.
•If the power cord becomes frayed or worn, replace it.
•To avoid electrical shock and damage to the cord, grasp the plug when unplugging the power cord.
The power cord is attached to the printer as a plug-in device on the back of the printer. If it is necessary
to disconnect all electrical power from the printer, disconnect the power cord from the electrical outlet.
®
Xerox
B205 Multifunction Printer
11
User Guide
Electrical Safety
Emergency Power Off
If any of the following conditions occur, power off the printer immediately and disconnect the power
cord from the electrical outlet. Contact an authorized Xerox service representative to correct the
problem if:
•The equipment emits unusual odors or makes unusual noises.
•The power cable is damaged or frayed.
•A wall panel circuit breaker, fuse, or other safety device has been tripped.
•Liquid is spilled into the printer.
•The printer is exposed to water.
•Any part of the printer is damaged.
Laser Safety
This printer complies with laser product performance standards set by governmental, national, and
international agencies and is certified as a Class 1 Laser Product. The printer does not emit hazardous
light because the beam is totally enclosed during all modes of customer operation and maintenance.
WARNING: Use of controls, adjustments, or performance of procedures other than those
specified in this manual can result in hazardous radiation exposure.
®
Xerox
B205 Multifunction Printer
12
User Guide
Operational Safety
Operational Safety
Your printer and supplies were designed and tested to meet strict safety requirements. These include
safety agency examination, approval, and compliance with established environmental standards. Your
attention to the following safety guidelines helps to ensure the continued, safe operation of your
printer.
Operational Guidelines
•Do not remove any paper trays while the printer is printing.
•Do not open the doors when the printer is printing.
•Do not move the printer when it is printing.
•Keep hands, hair, neckties, and so on, away from the exit and feed rollers.
•Covers, which require tools for removal, protect the hazard areas within the printer. Do not remove
the protective covers.
•Do not override any electrical or mechanical interlock devices.
•Do not attempt to remove paper that is jammed deeply inside the printer. Switch off the printer
promptly and contact your local Xerox representative.
WARNING:
•The metallic surfaces in the fuser area are hot. Always use caution when removing paper jams
from this area and avoid touching any metallic surfaces.
•To avoid a tip hazard, do not push or move the device with all the paper trays extended.
Ozone Release
This printer produces ozone during normal operation. The amount of ozone produced is dependent on
print volume. Ozone is heavier than air and is not produced in amounts large enough to harm anyone.
Install the printer in a well-ventilated room.
For more information in the United States and Canada, go to www.xerox.com/environment. In other
markets, please contact your local Xerox representative or go to www.xerox.com/environment_europe.
Printer Location
•Place the printer on a level, solid, non-vibrating surface with adequate strength to hold its weight.
To find the weight for your printer configuration, refer to Physical Specifications.
•Do not block or cover the slots or openings on the printer. These openings are provided for
ventilation and to prevent overheating of the printer.
•Place the printer in an area where there is adequate space for operation and servicing.
•Place the printer in a dust-free area.
®
Xerox
B205 Multifunction Printer
13
User Guide
Operational Safety
•Do not store or operate the printer in an extremely hot, cold, or humid environment.
•Do not place the printer near a heat source.
•Do not place the printer in direct sunlight to avoid exposure to light-sensitive components.
•Do not place the printer where it is directly exposed to the cold air flow from an air conditioning
system.
•Do not place the printer in locations susceptible to vibrations.
•For optimum performance, use the printer at the elevations specified in Environmental
Specifications.
Printer Supplies
•Use the supplies designed for your printer. The use of unsuitable materials can cause poor
performance and a possible safety hazard.
•Follow all warnings and instructions marked on, or supplied with, the product, options, and
supplies.
•Store all consumables in accordance with the instructions given on the package or container.
•Keep all consumables away from the reach of children.
•Never throw toner, print/drum cartridges, or toner containers into an open flame.
•When handling cartridges, for example toner and such, avoid skin or eye contact. Eye contact can
cause irritation and inflammation. Do not attempt to disassemble the cartridge, which can
increase the risk of skin or eye contact.
CAUTION: Use of non-Xerox supplies is not recommended. The Xerox Warranty or Service
Agreement do not cover damage, malfunction, or degradation of performance caused by use of
non-Xerox supplies, or the use of Xerox supplies not specified for this printer.
®
Xerox
B205 Multifunction Printer
14
User Guide
Maintenance Safety
Maintenance Safety
•Do not attempt any maintenance procedure that is not specifically described in the
documentation supplied with your printer.
•Clean with a dry lint-free cloth only.
•Do not burn any consumables or routine maintenance items. For information on Xerox
recycling programs, go to www.xerox.com/gwa.
WARNING: Do not use aerosol cleaners. Aerosol cleaners can cause explosions or fires when used
on electromechanical equipment. When installing the device in a hallway or similar restricted
area, additional space requirements can apply. Ensure that you comply with all workspace safety
regulations, building codes, and fire codes for your area.
®
supplies
®
Xerox
B205 Multifunction Printer
15
User Guide
Printer Symbols
SymbolDescription
Warning :
Indicates a hazard which, if not avoided, could result in death or serious injury.
Caution:
Indicates a mandatory action to take in order to avoid damage to the
property.
Hot surface on or in the printer. Use caution to avoid personal injury.
Pinch Hazard:
Printer Symbols
This warning symbol alerts users to areas where there is the possibility of
personal injury.
Do not burn the item.
Do not touch the part or area of the printer.
Do not load envelopes.
Do not touch.
®
Xerox
B205 Multifunction Printer
16
User Guide
SymbolDescription
Do not push.
Do not expose the unit to direct sunlight.
Do not expose the unit to temperatures lower or higher than specified.
Do not insert the unit in a different orientation.
Printer Symbols
To n er
Clean the areas indicated.
Register the original document to the corner indicated, and load face down.
Load media face down and in the direction indicated.
Load media face up.
®
Xerox
B205 Multifunction Printer
17
User Guide
SymbolDescription
Push down.
Push to open.
Start Button
Power On/Off Button
Printer Symbols
Clear All Button
Stop Button
Copy Button
Scan Button
Machine Status Button
®
Xerox
B205 Multifunction Printer
18
User Guide
SymbolDescription
Menu and Navigation Buttons
Status and Wireless Indicator
Power Saver Button
LAN
Local Area Network
Printer Symbols
USB
Universal Serial Bus
This item can be recycled. For details, see Recycling and Disposal.
®
Xerox
B205 Multifunction Printer
19
User Guide
Environmental, Health, and Safety Contact Information
Environmental, Health, and Safety Contact
Information
For more information on Environment, Health, and Safety in relation to this Xerox product and supplies,
contact:
•United States and Canada: 1-800-ASK-XEROX (1-800-275-9376)
•Europe: EHS-Europe@xerox.com
For product safety information in the United States and Canada, go to www.xerox.com/environment.
For product safety information in Europe, go to www.xerox.com/environment_europe.
®
Xerox
B205 Multifunction Printer
20
User Guide
Getting Started
This chapter includes:
•Parts of the Printer ......................................................................................................................................................... 22
•Introduction to Services ............................................................................................................................................... 30
•More Information ........................................................................................................................................................... 40
2
Xerox® B205 Multifunction Printer
User Guide
21
Parts of the Printer
4
5
6
7
9
10
2
3
8
1
Parts of the Printer
Before you use your printer, take some time to familiarize yourself with the various features and
options.
13Automatic Document Feeder15Constant Velocity Transport (CVT) Glass
14Platen Glass16Automatic Document Feeder Guides
Automatic Document Feeder Guidelines
The Automatic Document Feeder accommodates the following original-sized documents:
•Width: 5.8–8.5 in. (148–216 mm)
•Length: 5.8–14 in. (148–356 mm)
•Weight: 16 - 28 lb (60–105 g/m
Follow these guidelines when loading original documents into the automatic document feeder:
•Load original documents face up so that the top of the document enters the feeder first.
•Place only loose sheets of undamaged paper in the automatic document feeder.
•Adjust the paper guides so that they fit against the original documents.
•Insert paper in the automatic document feeder only when ink on the paper is dry.
•Do not load original documents above the MAX fill line.
2
)
®
Xerox
B205 Multifunction Printer
23
User Guide
Parts of the Printer
The automatic document feeder can hold a maximum of 40 originals of 20 lb (80 g/m²) thickness.
1.Load documents to be scanned face up in the input tray
of the automatic document feeder with the top of the
document to the left of the tray.
2.Move the document guide to just touch both sides of the
document.
Platen Glass Guidelines
The platen glass accommodates document size is 8.5 x 11 in. or A4. Use the platen glass rather than
the automatic document feeder to copy or scan oversized, torn, or damaged originals, and for books
and magazines.
1.Open the automatic document feeder and place single
documents face down on the platen glass aligned with
the rear left corner.
2.The default document size is 8.5 x 11 in. or A4. For other
sized documents, change the Original Size option.
Note: Documents are only scanned once even when
several copies are selected.
®
Xerox
B205 Multifunction Printer
24
User Guide
Media Output Locations
The device has two output locations:
•Output tray, face down, up to a maximum of 120 sheets
of 20 lb (80 g/m²) paper.
The output tray collects printed paper face down, in the
order in which the sheets were printed. The output tray
should be used for most jobs. When the output tray is
full, a message displays on the control panel.
To use the output tray, make sure that the rear cover is
closed.
Notes:
•If paper coming out of the output tray has
problems, such as excessive curl, try printing to
the rear cover.
•To reduce paper jams, do not open or close the rear cover while the printer is printing.
•Rear cover, face up, one sheet at a time.
The device sends output to the output tray by default. If
using special media, such as envelopes, or excessive curl
or creases appear, the rear cover should be used for the
output. Open the rear cover and keep it open while
printing one sheet at a time.
Parts of the Printer
CAUTION: The fuser area inside the rear cover of your
device becomes very hot when in use. Take care when
you access this area.
®
Xerox
B205 Multifunction Printer
25
User Guide
Rear View
1
3
Parts of the Printer
2
4
1Network Port3USB Port
2Power Receptacle4Rear Cover
®
Xerox
B205 Multifunction Printer
26
User Guide
Parts of the Printer
Control Panel Overview
The control panel consists of a display, and buttons you press to control the functions available on the
printer. The control panel:
•Displays the current operating status of the printer.
•Provides access to copy, print, and scan.
•Provides access to information pages.
•Prompts you to load paper, replace supplies, and clear jams.
•Displays errors and warnings.
1 2
.
3
4
13
6
5
12
7
8
9101114
NumberButtonDescription
1Copy: Activates Copy mode.
2Scan: Activates Scan mode. Provides access to Scan to Network, Scan to
PC, Scan to Email and Scan to USB options.
3Display Screen: Displays all the available programming features, plus
general printer information.
4Machine Status: Use this button to access the System Menus to view
printer status information and the printer serial number, and to update
printer settings.
®
Xerox
B205 Multifunction Printer
User Guide
27
NumberButtonDescription
Parts of the Printer
5-6
12-13
Menu: Enters Menu mode and enables you to access options and
settings.
Arrows: The up and down arrows are used to scroll through the options
available in the selected menu, and to increase or decrease values.
Back: Sends the user back to the higher menu level.
OK: Confirms the selection on the screen.
7Clear All: Clears the last selections made.
8Power Saver: Sends the printer into Power Saver mode and provides
access to the Power Down option.
9Power: Powers the printer on or off.
10Stop: Pressing the Stop button stops the job in progress. Pressing Stop
also exits the Menu Mode.
11Start: Activates a job.
14Status / Wireless LED: The color of the LEDs indicates the current status
of the printer.
®
Xerox
B205 Multifunction Printer
User Guide
28
Loading...
+ 240 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.