Whirlpool AQUASTEAM 9701, AQUASTEAM 9700 INSTRUCTION FOR USE
30106225aGB.fm Page 1 Thursday, December 18, 2008 11:39 AM
GB PROGRAMME CHART
A. “On/Off” button
B. Programme selection buttons
C. Option buttons
D. “Start (Pause)” button
E. “Special programmes” button
F. “Temperature” button
G. “Start delay” button
H. “Variable spin” button
I. “Reset/Drain” button
Tempe-
Programme
Cotton /
Antibacterial
Synthetics
Delicates
Wool
Handwash
Big Items
Sport
SuperEco
rature
20 - 95 °C
20 - 60 °C
20 - 40 °C
20 - 40 °C 2.0
20 - 40 °C 2.0
20 - 60 °C
20 - 30 °C
20 - 60 °C
Care
Labels
B
C
{
A
Max
Load
- Respect the manufacturer’s recommendations on the care label
kg
Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and linen.
At a temperature of 80°C or more, this programme eliminates bacteria, ensuring sanitization of your laundry.
9.0
The bacteria removal efficiency has been tested following a similar methodology to the NF EN 13697 standard
of Nov. 2001.
Normally soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira), polyamide (Perlon, Nylon) or
3.5
blends with cotton.
Curtains and delicate clothing, dresses skirts, shirts and blouses.
2.5
Only woollens, labelled with the Woolmark and identified as machine washable.
This programme (40°C) is tested and approved by The Woolmark Company for machine washable wool.
Textiles made of silk, linen, wool and viscose marked as “handwashable”.
This programme (40°C) is tested and approved by The Woolmark Company for handwashable wool.
Blankets made of synthetic fibres; bed covers filled with feathers, polyester or other artificial fibers; sleeping
3.0
bags, bathmats and similar items.
Normally soiled and sweaty sportswear made of cotton jersey or microfibers.
This programme includes a prewash cycle – you ca n add detergen t also to the pre wash ch amber. Do not add any
3.5
softener.
Slightly to normally soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and linen.
Offers highest economy in energy consumption by prolonged washing duration. Ideal to be run overnight to
9.0
additionally profit from the more favourable energy rates. To avoid noise of spinning at night, set spin speed to “0”
and start spin programme in the morning, or define programme start with “Start delay” accordingly.
Type of wash/Notes
D
J. “Favourites” button
I
E
N
K
}
F G H
M
L
{
C
Detergents and additives Special options Start
Pre-
❉
❉
❉
—
—
❉
❉
—
Main
wash
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
wash
J
Softener Intensive
—
rinse
❉❉❉❉❉❉❉❉❉
❉❉❉❉❉❉❉❉❉
❉
❉
❉
———❉——
——————
——————
❉❉
❉❉
❉❉
K. Programme sequence indication
Add garment Programme
L. “Child lock” indication
M. “Detergent overdosage” indication
N. Red failure indication
The buttons of the control panel are touch
buttons which are activated by a simple touch
with the fingertip (except the “On/Off” button - it
must be pressed down).
Easy
Eco Pre-
ironing
wash
Steam
Wash
Boost
in process
Steam
Saniti-
2)
zation
2)
delay
Programme
finished
Variable
spin
❉❉
❉❉
❉❉
——
—— — —
———— —
——
❉
❉❉
❉❉
❉❉
Spin
Max
Spin
Speed
rpm
max.
max.
1000
1000
400
1000
max.
max.
1)
1)
1)
1)
Daily load
Quick wash
Rinse & Spin
Spin
Jeans
Lingerie
Steam
Auto Clean
Steam
Refresh
SPECIAL PROGRAMMES
❉
optional / Yes : dosing required
:
1)
For improved garment care, spin speed is restricted in these programmes.
2)
Only selectable within the temperature range of 40 to 60°C.
Black process 45.0° 150.0 LPI
20 - 60 °C
20 - 30 °C 6.0
——
——
20 - 60 °C
20 - 30 °C 2.0
———
—
Slightly to normally soiled textiles made of cotton and/or synthetics.
6.0
Shortly worn outer clothing made of cotton, polyester, polyamide and blends with cotton.
Same as the last rinse and the final spin in the “Cotton” programme.
9.0
In this programme spinning is intensive. Same as the spin cycle in the “Cotton” programme.
9.0
Normally soiled cotton jeanswear and garments made of robust jean slike m ateri al such as trou sers and jack ets.
7.0
This programme is particularly suitable to treat delicate lingerie (use of a laundry net strongly recommended).
Self-cleaning programme. Cleans the interior of your washing machine and thus helps to avoid smells or
deposits. Run this programme regularly if you never or seldom wash your laundry at temperatures over 60°C
or if your washing machine has not been in use for a long time.
During this programme “St” appears on the display.
Clean and dry laundry items made of cotton and/or synthetics which were already used.
Refreshes, reduces smells, moderates creasing and makes the items ready to wear or use within 20 minutes. After
1.0
programme end, immediately put the laundry on hangers for 10 minutes before using. During this programme “St”
appears on the display .
The wool and handwash cycles of this machine have been tested and approved by The Woolmark Company for the washing of
Woolmark garments labelled as “machine wash” or “hand wash” provided that the garments are washed according to the
instructions on the garment label and those issued in this programme chart. M0702
IMPORTANT: Do not load any laundry!
Yes
—
Yes
—
——
❉❉❉
❉
——————
❉❉
—— — —
———— —
——— ——————
❉
—
Yes
Yes
❉
❉
——
❉❉ ❉ ❉ ❉ ❉
——————
❉❉
❉❉
❉❉
❉❉
❉❉
max.
max.
max.
max.
max.
400
1)
——— ——————❉——
——— ——————❉——
Whirlpool is a registered trademark of Whirlpool USA
5019 301 06225/A
30106225aGB.fm Page 2 Thursday, December 18, 2008 11:39 AM
CONSUMPTION DATA
Programme
Cotton / Antibacterial 95 9.0 87
Cotton 60 9.0 82 1.71 2:10
Cotton with “Eco”
Cotton 40 9.0 82 0.80 2:05
Synthetics 60 3.5 46
Synthetics 40 3.5 42 0.50 1:20
Delicates 30 2.5 60 0.40 0:45
Handwash 40 2.0 45 0.60 0:40
Big Items 40 3.0 74 0.75 1:30
SuperEco 60 9.0 80 1.08 4:00
Daily load 40 6.0 73 0.60 1:00
Quick wash 30 6.0 73 0.30 0:30
Lingerie 30 2.0 45 0.35 0:36
Steam Auto Clean — — 11 0.50 0:35
Consumption values were measured in normalized conditions in compliance with Standard IEC/EN 60 456. Consumption data in the home
may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.
*
**
***
Steam Refresh — 1.0 0.5 0.20 0:10
The time indicated on the display can deviate from the values in the table, because it takes into account the operating conditions
applicable at that time.
To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.
Reference Programme for Energy Label (with separator in detergent dispenser removed for use of powder detergent).
***
Wool 40 2.0 60 0.60 0:45
Sport 30 3.5 54 0.55 1:34
Jeans 40 7.0 95 0.85 2:21
Tem p era t u re
(°C)
60 9.0 69 1.53 2:20
ADD DETERGENTS, CLOSE THE DOOR
AND SELECT THE PROGRAMME
Add detergent as indicated on the front page and as described in
the chapter “Detergent and Additives” in your Instructions for
Use (remove separator in detergent dispenser for use of powder
detergent if necessary).
1. Push the
around the programme buttons has finished and only one
programme button lights up.
2. Select the
corresponding programme button; it is marked by a blue light.
Or select a “special programme” by touching the “Special
programmes” button on the display until the symbol of the
desired programme lights up.
3. The
temperature
can be altered by pressing the “Temperature” button or
the “Spin speed” button .
button . Wait until the light loop
“On/Off”
desired programme
and
by touching the
spin speed
indicated on the display
SELECT ANY DESIRED OPTION
If a combination of programme and/or options is not possible, the
option light switches off automatically .
“Intensive rinse” button
• More water is added and rinse cycle is prolonged.
• Particularly suitable for areas with very soft water or for
washing baby linen and helping people with allergies.
“Easy ironing” button
• Makes ironing easier by an increased water quantity and a very
gentle spin.
“Eco” button
• With a modified temperature profile and a slightly prolonged
washing duration, the optimum combination of excellent washing
result and even lower energy consumption is achieved.
“Prewash” button
• Only for heavily soil ed loads (for example sand, granular dirt)
sensible. Increases the cycle time by approximately 15 min.
Load
Water
(kg)
• Do not use liquid detergent for the main wash when activating
the Prewash option.
“Steam Wash Boost” button
• Treats the laundry with hot steam during the wash cycle in
order to help removing stains.
• Selectable for laundry made of cotton and/or synthetics within
temperature range of 40 to 60°C.
“Steam Sanitization” button
• Eliminates bacteria and helps sanitizing the laundry.
• Appropriate for cotton and/or synthetic laundry items with
care label within temperature range of 40 to 60°C and up
to a maximum load of 6 kg.
• Prolongs the programme by approx. half an hour to an hour,
depending on the load size.
“Variable spin” button
• Every programme has a predefined spin speed.
• Touch the button to set another spin speed.
• If you select spin speed “0”, the final spinning is cancelled but
intermediate spin peaks remain during rinse. The water is
drained out only.
• If you select “Rinse hold” , the laundry remains in the last
rinse water without progressing to the final spin cycle to avoid
creasing and prevent colours from changing.
- Select “Rinse hold” if you want to postpone spinning
- Do not leave the laundry to soak in the rinse hold for too long.
- The programme stops to “Rinse hold” .when the
- To terminate the “Rinse hold” by draining the water, without
- To terminate the programme by spinning the laundry, touch the
Energy
(l)
(kWh)
2.60 2:10
**
0.85 1:35
**
to a later time or if you want to drain only.
“Rinse hold” symbol on the display blinks; the
button blinks as well.
(Pause)”
any spinning, touch the
“Variable spin” button to select the desired spin speed and then
the
“Start (Pause)”
Approx. Programme Duration
(hours : minutes)
“Start (Pause)”
button to start the spin cycle.
button.
*
“Start
SAVE Y OUR FAVOURITE PROGR AMMES
If there is a programme setting which you use frequently, the
appliance offers the possibility to save one setting for each
programme so that it can be used again by just touching one button.
• Select the desired programme, temperature, spin speed and
option(s), push and hold the
least 3 seconds. The lamp next to
blinks and then lights up - the programme setting is saved.
Next time you want to use your individual programme setting,
select the programme, touch the
start by touching
If you want to replace the saved programme setting by
another one:
• Proceed as already described above - the previously saved
programme setting will be replaced by the new one.
“Start (Pause)”
“Favourites”
“Favourites”
button for at
“Favourites”
button and
.
shortly
START DELAY
The “Start delay” allows to run the machine at the consumer’s
convenience, for example at night when electricity is cheaper. Do
not use liquid detergent when activating the “Start delay”.
• Select programme, temperature, spin speed and options.
•Touch the
•Touch the
• The time delay indication disappears when the programme
• The number of hours preselected can be changed by touching
To cancel the “Start delay”
..before you touch the “Start (Pause)” button:
• Touch another programme button or set start delay time to
..after having touched the “Start (Pause)” button:
Press the
the start delay time disappears from the display.
“Start (Pause)”
step between 0:30 and 23:00 hours; a clock symbol appears
next to the delay time on the display.
“Start (Pause)”
The countdown of the delay time begins; the clock symbol and
the colon between hours and minutes on the display blink.
starts and it is replaced by the remaining programme time.
the “Start delay” button.
“0:00” - the time delay disappears after a few seconds.
“Reset/Drain”
button to select a delay time
button .
button for at least 3 seconds -
“ADD GARMENT” INDICATION
Before starting a programme, the symbol lights to show that the
door can be opened to add more washing. As soon as you press
“Start (Pause)”
programme and must on no account be forced open. In case you
have to open it urgently during a running programme, refer to
“Reset a running programme before the end”.
If you try to start a wash programme and the door is not properly
closed, the “Add garment” indication will blink.
, the door will lock until the end of the
PROGR AMME START
Open the tap and touch the
blinking
“Start (Pause)”
“Add garment” indication goes out, and the lit bubbles indicate that
the programme is in process. In some phases, the remaining
programme time is newly calculated - if this is the case, the “6
Sense” indication on the display will fade, and the remaining
programme time is replaced by an animation.
“Start (Pause)”
button light becomes constant. The
button ; the
th
CHILD LOCK
Activating the child lock prevents children from starting a wash
cycle or changing the settings of a running programme. The child
lock cannot be activated or deactivated when the programme
selector is in the “Off/O” position. To activate the child lock:
• Turn the programme selector to a programme position, or run
a programme as usual.
• Press the “Temperature” and the “Variable spin”
button simultaneously for at least 3 seconds. The “Child lock”
symbol will shortly blink and then light up to indicate
that the child lock is active.
The programme setting cannot be changed anymore; the only change
possible is to switch the washer off by turning the programme selector
to the “Off/O” position. To deactivate the child lock, proceed in the
same way as for activating it.
To deactivate the child lock, proceed in the same way as for activating it.
RED FAILURE INDICATIONS
If one of the red failure indications on the display lights up, refer to
the “Troubleshooting Guide” in your “Instructions for Use”.
PROGRAMME END
• The display shows “End”, and the “Programme finished”
indication lights up.
1. Switch the machine off by pushing
2. Close the water tap.
3. Open the door and unload the machine.
4. Leave the door ajar to allow the drum to dry.
• If you do not turn the programme selector to the “Off/O”
position, the lights of the control panel go out after a few minutes
to save energy - only “End” will remain on the display.
“On/Off”
DETERGENT OVERDOSAGE INDICA TION
The symbol will blink at the end of the programme if you used too
much detergent. Use less detergent next time.
CHANGE PROGRAMME AND/OR OPTIONS
AFTER PROGRAMME START
1. Touch the
programme. The light blinks.
2. Select the new programme, temperature, any options and
another spin speed if you want.
3. Touch the
programme continues at the same position where the
previous programme was interrupted. Do not add detergent
for this programme.
“Start (Pause)”
“Start (Pause)”
button to pause the
button again. The new
RESET A RUNNING PROGRAMME BEFORE
THE END
The
“Reset/Drain”
the end.
Touch and hold the
seconds; the bubbles light in the programme sequence indicator
goes out, and the remaining time on the display is replaced by an
animation. Any existing water is drained out before the door can be
opened. Caution! The washing might still be hot.
button cancels a programme before
“Reset/Drain”
Whirlpool is a registered trademark of Whirlpool USA
button for at least 3
5019 301 06225/A
.
Black process 45.0° 150.0 LPI
Loading...