Welch Allyn Spot Vitals Signs Connectivity Kit User Manual

4341 State Street Road Skaneateles Falls, NY 13153 Tel: (800) 535-6663 (North America only) or (315) 685-4560 Fax: (315) 685-3361 www.welchallyn.com

4200-170 Connectivity Accessory Kit

INSTALLATION INSTRUCTIONS:

1. Place IR dongle into bracket assembly. Align the dongle feet with corresponding holes in bracket.

2. Tighten clamp screws.

3. Clean side of Spot Vital Signs housing using alcohol wipe.

4. Remove adhesive protective paper from back of bracket

5. Place bracket tab (A) on Spot Vital Signs surface (B) and position the hole (C) in the bracket assembly over IR window (D) as shown. Press firmly to secure adhesive.

(Note: Max adhesive strength achieved in 24 hours.)

CAUTION: Do not download any drivers during the installation process for this IR RS232 device. Drivers are not required and will interfere with communication between the device and the Electronic Medical Record.

(B)

IR Dongle

Bracket

Tab

(A)

Screw

Clamp

Bracket

Assembly

(D)

(C)

(D)

Material #: 708571 Rev. B