CAUTION
Read all precautions and instructions in this manual before using
this equipment. Save this manual
for future reference.
Model No. WEBE0332.0
Serial No.
Write the serial number in the
space above for reference.
QUESTIONS?
As a manufacturer, we are committed to providing complete customer satisfaction. If you have
questions, or if parts are missing,
PLEASE DO NOT CONTACT
THE STORE; please contact
Customer Care.
IMPORTANT: You must note the
product model number and
serial number (see the drawing
above) before contacting us:
CALL TOLL-FREE:
1-877-992-5999
Mon.–Fri. 6 a.m.–6 p.m. MST
Sat. 8 a.m.–4 p.m. MST
ON THE WEB:
www.weiderfitness.com
USER’S MANUAL
Serial Number Decal (under seat)
Visit our website at
www.weiderfitness.com
new products, prizes,
fitness tips, and much more!
2
TABLE OF CONTENTS
WEIDER is a registered trademark of ICON IP, Inc.
WARNING DECAL PLACEMENT
WARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
PART IDENTIFICATION CHART . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
EXERCISE GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
PART LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
EXPLODED DRAWING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
ORDERING REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover
LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back Cover
The decals shown here have been
applied to the weight bench. If a
decal is missing or illegible, call
the telephone number on the
front cover of this manual and
request a free replacement decal.
Apply the decal in the location
shown. Note: The decals may not
be shown at actual size.
3
1. Before beginning any exercise program, consult your physician. This is especially important for persons over the age of 35 or persons with pre-existing health problems.
2. It is the responsibility of the owner to ensure
that all users of the weight bench are adequately informed of all precautions.
3. The weight bench is intended for home use
only. Do not use the weight bench in a commercial, rental, or institutional setting.
4.
Keep the weight
bench
indoors, away from
moisture and dust. Place the weight
bench
on a level surface, with a mat beneath it to
protect the floor or carpet. Make sure that
there is enough clearance around the weight
bench
to mount, dismount, and use it.
5.
Inspect and properly tighten all parts regularly. Replace any worn parts immediately.
6. Make sure that the locking pin is fully
engaged before the weight bench is used.
7. Keep children under age 12 and pets away
from the weight bench at all times.
8.
Wear appropriate clothes while exercising.
Always wear athletic shoes for foot protection while exercising.
9.
The weight bench is designed to support a
maximum user weight of 300 lbs. (133 kg)
and a maximum total weight of 400 lbs. (181
kg). Do not use the weight bench with more
than 100 lbs. (45 kg) of weight. Note: The
weight bench does not include weights.
10.
If you feel pain or dizziness while exercising,
stop immediately and cool down.
11. Use the weight bench only as described in
this manual.
WARNING: To reduce the risk of serious injury, read all important precautions and
instructions in this manual and all warnings on the weight bench before using the weight bench.
ICON assumes no responsibility for personal injury or property damage sustained by or through the
use of the weight bench.
IMPORTANT PRECAUTIONS
4
BEFORE YOU BEGIN
Thank you for selecting the new WEIDER®BASICS
weight bench. The weight bench is designed to be
used with your own weights to develop the major muscles of your upper body.
For your benefit, read this manual carefully before
using the weight bench. If you have questions after
reading this manual, please see the front cover of this
manual. To help us assist you, note the product model
number and serial number before contacting us. The
model number and the location of the serial number
decal are shown on the front cover of this manual.
To avoid a registration fee for any service needed
under warranty, you must register the weight
bench at www.weiderservice.com/registration.
Before reading further, please review the drawing below
and familiarize yourself with the parts that are labeled.
Front Leg
Pivot Bracket
Locking Pin
Foam Pad
Seat
ASSEMBLED DIMENSIONS:
Height: 41 in. (104 cm)
Width: 18 in. (46 cm)
Depth: 54 in. (137 cm)
Weight: 33 lbs. (15 kg)
Backrest
5
PART IDENTIFICATION CHART
See the drawings below to identify small parts used in assembly. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. Note: Some small parts
may have been preattached. If a part is not in the parts bag, check to see if it has been preattached.
M6 x 45mm Bolt (16)
M10 x 25mm Bolt (25)
M10 Large Washer (20)
M6 Washer (22)
M10 Nylon Locknut (19)
M8 Nylon Locknut (27)
M8 x 15mm Bolt (29)
M6 x 16mm Bolt (24)
M4 x 16mm Screw (28)
M10 x 63mm Carriage Bolt (18)
M10 x 65mm Bolt (17)
M8 x 68mm Bolt (26)
M10 x 85mm Bolt (23)
6
ASSEMBLY
1.
Press two 50mm Round Outer Caps (12) onto
the Stabilizer (4) that does not have warning
decals.
Orient the Stabilizer (4) so that the indents are
in the position shown, and attach the Stabilizer
to the Front Leg (2) with two M10 x 63mm
Carriage Bolts (18) and two M10 Nylon
Locknuts (19). Do not tighten the Nylon
Locknuts yet.
Before beginning assembly, make sure
that you have read and understand the
information in the box above.
Before beginning assembly, carefully read the following information and instructions:
• To hire an authorized service technician to
assemble the weight bench, call 1-800-445-2480.
• Assembly requires two persons.
• Because of its size, the weight bench should be
assembled in the location where it will be used.
Make sure that there is enough clearance to walk
around the weight bench as you assemble it.
• Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until assembly is completed.
• For help identifying small parts, use the PART
IDENTIFICATION CHART on page 5.
• As you assemble the weight bench, make sure all
parts are oriented as shown in the drawings.
• Tighten all parts as you assemble them, unless
instructed to do otherwise.
• Assembly requires the following tools (not
included):
two adjustable wrenches
one rubber mallet
one standard screwdriver
one Phillips screwdriver
Assembly may be more convenient if you have a
socket set, a set of open-end or closed-end
wrenches, or a set of ratchet wrenches.
Make Assembly Easier
Everything in this manual is designed to ensure
that the weight bench can be assembled successfully by almost anyone. By setting aside
plenty of time, assembly will go smoothly.
1
2
19
12
12
19
18
Indents
4
Name
Decal
7
3
2. Attach the Front Leg (2) to the Frame (1) with
two M10 x 65mm Bolts (17), two M10 Large
Washers (20), and two M10 Nylon Locknuts
(19). Do not tighten the Nylon Locknuts yet.
3. Press two 50mm Round Outer Caps (12) onto
the other Stabilizer (4).
Orient the Stabilizer (4) so that the indents and
the decals are in the positions shown, and attach
the Stabilizer to the Rear Leg (3) with two M10 x
63mm Carriage Bolts (18) and two M10 Nylon
Locknuts (19). Do not tighten the Nylon
Locknuts yet.
Attach the Rear Leg (3) to the Frame (1) with
two M10 x 25mm Bolts (25) and two M10 Large
Washers (20).
Tighten the M10 Nylon Locknuts (19) used in
steps 1–3.
4. Orient the Pivot Bracket (6) as shown, and
attach it to the Backrest Frame (5) with two M8
x 68mm Bolts (26) and two M8 Nylon Locknuts
(27).
Orient the Backrest (7) as shown, and attach it
to the Backrest Frame (5) with four M6 x 16mm
Bolts (24).
2
4
1
19
19
2
20
20
17
20
25
19
19
4
12
12
18
3
1
20
Warning
Decal
Warning
Decal
Indents
7
Wide
End
5
24
24
24
27
26
6
8
5. Insert the Pivot Bracket (6) into the slot in the
Frame (1).
Apply some of the included grease to the M10 x
85mm Bolt (23). Attach the Backrest Frame (5)
to the Frame (1) with the Bolt and an M10
Nylon Locknut (19). Do not overtighten the
Nylon Locknut; the Backrest Frame must
pivot easily.
Insert the Locking Pin (21) into the Frame (1)
and through an adjustment hole in the Pivot
Bracket (6).
6. Attach the tether on the Locking Pin (21) to the
bottom of the Frame (1) with an M4 x 16mm
Screw (28).
Orient the Seat (8) as shown, and attach it to
the Frame (1) with four M6 x 45mm Bolts (16)
and four M6 Washers (22).
6
21
23
6
5
19
1
Slot
Lubricate
Adjustment
Holes
8
1
16
22
28
Tether
21
Wide
End
5
9
8. Make sure that all parts are properly tight-
ened before you use the weight bench.
7. Attach an M8 x 15mm Bolt (29) and an M8
Nylon Locknut (27) to the last hole in the Pivot
Bracket (6).
Insert the two Pad Tubes (10) into the Front
Leg (2). Slide the four Foam Pads (9) onto the
Pad Tubes.
7
9
2
9
9
27
29
6
10
10
This section explains how to adjust the weight bench. See EXERCISE GUIDELINES on page 11 for important
information about how to get the most benefit from your exercise program. Also, refer to the accompanying exercise guide to see the correct form for several exercises.
Make sure all parts are properly tightened each time you use the weight bench. Replace any worn parts immediately. The weight bench can be cleaned with a damp cloth and a mild, non-abrasive detergent; do not use solvents.
ADJUSTMENT
ADJUSTING THE BACKREST
The Backrest (7) can be used in a declined position, a level position, or any of three inclined positions. To adjust the Backrest, first remove the
Locking Pin (21) from the Frame (1). Move the
Backrest to the desired position, and reinsert the
Locking Pin into the Frame and an adjustment hole
in the Pivot Bracket (6).
WARNING: Make sure that the
Locking Pin (21) is fully inserted through the
Frame (1) and the Pivot Bracket (6).
7
21
6
1
Adjustment
Holes
11
EXERCISE GUIDELINES
THE FOUR BASIC TYPES OF WORKOUTS
Muscle Building
To increase the size and strength of your muscles,
push them close to their maximum capacity. Your muscles will continually adapt and grow as you progressively increase the intensity of your exercise. You can
adjust the intensity level of an individual exercise in
two ways:
• by changing the amount of resistance used
• by changing the number of repetitions or sets per-
formed. (A “repetition” is one complete cycle of an
exercise, such as one sit-up. A “set” is a series of
repetitions.)
The proper amount of resistance for each exercise
depends upon the individual user. You must gauge
your limits and select the amount of resistance that is
right for you. Begin with 3 sets of 8 repetitions for each
exercise you perform. Rest for 3 minutes after each
set. When you can complete 3 sets of 12 repetitions
without difficulty, increase the amount of resistance.
Toning
You can tone your muscles by pushing them to a moderate percentage of their capacity. Select a moderate
amount of resistance and increase the number of repetitions in each set. Complete as many sets of 15 to
20 repetitions as possible without discomfort. Rest for
1 minute after each set. Work your muscles by completing more sets rather than by using high amounts of
resistance.
Weight Loss
To lose weight, use a low amount of resistance and
increase the number of repetitions in each set.
Exercise for 20 to 30 minutes, resting for a maximum
of 30 seconds between sets.
Cross Training
Cross training is an efficient way to get a complete and
well-balanced fitness program. An example of a balanced program follows:
• Plan strength training workouts on Monday,
Wednesday, and Friday.
• Plan 20 to 30 minutes of aerobic exercise, such as
running on a treadmill or riding on an elliptical exerciser or exercise cycle, on Tuesday and Thursday.
• Rest from both strength training and aerobic exercise
for at least one full day each week to give your body
time to regenerate.
The combination of strength training and aerobic exercise will reshape and strengthen your body, plus develop your heart and lungs.
PERSONALIZING YOUR EXERCISE PROGRAM
Determining the appropriate length of time for each
workout, and the numbers of repetitions and sets to
complete, is an individual matter. Avoid overdoing it
during the first few months of your exercise program.
Progress at your own pace and be sensitive to your
body’s signals. If you experience pain or dizziness
while exercising, stop immediately and cool down.
Find out what is wrong before continuing. Remember
that adequate rest and a proper diet are important factors in any exercise program.
WARMING UP
Begin each workout with 5 to 10 minutes of stretching
and light exercise to warm up. Warming up prepares
your body for more strenuous exercise by increasing
circulation, raising your body temperature and delivering more oxygen to your muscles.
WORKING OUT
Each workout should include 6 to 10 different exercises. Select exercises for every major muscle group,
emphasizing areas that you want to develop most. To
give balance and variety to your workouts, vary the
exercises from workout to workout.
Schedule your workouts for the time of day when your
energy level is the highest. Each workout should be
followed by at least one day of rest. Once you find the
schedule that is right for you, stick with it.
EXERCISE FORM
Maintaining proper form is an essential part of an
effective exercise program. This requires moving
through the full range of motion for each exercise, and
moving only the appropriate parts of the body.
Exercising in an uncontrolled manner will leave you
feeling exhausted. On the exercise guide accompanying this manual you will find photographs showing the
correct form for several exercises, and a list of the
muscles affected. See the muscle chart on the next
page to find the names of the muscles.
The repetitions in each set should be performed
smoothly and without pausing. The exertion stage of
each repetition should last about half as long as the
return stage. Proper breathing is important. Exhale
during the exertion stage of each repetition and inhale
during the return stroke. Never hold your breath.
12
Rest for a short period of time after each set. The
ideal resting periods follow:
• Rest for three minutes after each set for a muscle
building workout.
• Rest for one minute after each set for a toning work-
out.
• Rest for 30 seconds after each set for a weight loss
workout.
Plan to spend the first couple of weeks familiarizing
yourself with the equipment and learning the proper
form for each exercise.
COOLING DOWN
End each workout with 5 to 10 minutes of stretching.
Include stretches for both your arms and legs. Move
slowly as you stretch and do not bounce. Ease into
each stretch gradually and go only as far as you can
without strain. Stretching at the end of each workout
is an effective way to increase flexibility.
STAYING MOTIVATED
For motivation, keep a record of each workout. List
the date, the exercises performed, the resistance
used, and the numbers of sets and repetitions completed. Make copies of the exercise logs found on
page 13. Use the logs to record your weight and key
body measurements at the end of every month.
Remember, the key to achieving the greatest results
is to make exercise a regular and enjoyable part of
your everyday life.
A
B
C
D
E
F
G
H
I
J
K
L
M
N
MUSCLE CHART
O
P
Q
R
S
T
U
V
W
X
A. Sternomastoid (neck)
B. Pectoralis Major (chest)
C. Biceps (front of arm)
D. Obliques (waist)
E. Brachioradials (forearm)
F. Hip Flexors (upper thigh)
G. Abductor (outer thigh)
H. Quadriceps (front of thigh)
I. Sartorius (front of thigh)
J. Tibialis Anterior (front of calf)
K. Soleus (front of calf)
L. Anterior Deltoid (shoulder)
M. Rectus Abdominus (stomach)
N. Adductor (inner thigh)
O. Trapezius (upper back)
P. Rhomboideus (upper back)
Q. Posterior Deltoid (shoulder)
R. Triceps (back of arm)
S. Latissimus Dorsi (mid back)
T. Spinae Erectors (lower back)
U. Gluteus Medius (hip)
V. Gluteus Maximus (buttocks)
W. Hamstring (back of leg)
X. Gastrocnemius (back of calf)
13
MONDAY
Date:
/ /
EXERCISE WEIGHT SETS REPS
EXERCISE WEIGHT SETS REPS
EXERCISE WEIGHT SETS REPS
AEROBIC EXERCISE
AEROBIC EXERCISE
TUESDAY
Date:
/ /
WEDNESDAY
Date:
/ /
THURSDAY
Date:
/ /
FRIDAY
Date:
/ /
Make photocopies of this page for scheduling and recording your workouts.
14
Key No. Qty. Description Key No. Qty. Description
1 1 Frame
2 1 Front Leg
3 1 Rear Leg
4 2 Stabilizer
5 1 Backrest Frame
6 1 Pivot Bracket
7 1 Backrest
8 1 Seat
9 4 Foam Pad
10 2 Pad Tube
11 4 19mm Round Inner Cap
12 4 50mm Round Outer Cap
13 4 32mm Square Inner Cap
14 1 45mm Square Inner Cap
15 1 25mm x 50mm Inner Cap
16 4 M6 x 45mm Bolt
17 2 M10 x 65mm Bolt
18 4 M10 x 63mm Carriage Bolt
19 7 M10 Nylon Locknut
20 4 M10 Large Washer
21 1 Locking Pin
22 4 M6 Washer
23 1 M10 x 85mm Bolt
24 4 M6 x 16mm Bolt
25 2 M10 x 25mm Bolt
26 2 M8 x 68mm Bolt
27 3 M8 Nylon Locknut
28 1 M4 x 16mm Screw
29 1 M8 x 15mm Bolt
* – User’s Manual
* – Exercise Guide
* – Grease Packet
Note: Specifications are subject to change without notice. See the back cover of this manual for information
about ordering replacement parts. *These parts are not illustrated.
PART LIST—Model No. WEBE0332.0 R1007A
15
EXPLODED DRAWING—Model No. WEBE0332.0 R1007A
7
19
15
12
12
5
24
26
4
18
3
19
12
8
13
9
14
19
17
20
19
11
2
9
19
4
11
19
22
22
16
9
10
9
11
23
27
29
28
13
27
20
25
24
6
1
21
19
20
25
18
12
Part No. 187097 R1007A Printed in China © 2007 ICON IP, Inc.
LIMITED WARRANTY
ICON Health & Fitness, Inc. (ICON) warrants this product to be free from defects in workmanship and
material, under normal use and service conditions, for a period of ninety (90) days from the date of purchase. This warranty extends only to the original purchaser. ICON's obligation under this warranty is limited to replacing or repairing, at ICON's option, the product through one of its authorized service centers.
All repairs for which warranty claims are made must be preauthorized by ICON. If the product is shipped
to a service center, freight charges to and from the service center will be the customer’s responsibility. For
in-home service, the customer will be responsible for a minimal trip charge. This warranty does not extend
to any product or damage to a product caused by or attributable to freight damage, abuse, misuse,
improper or abnormal usage or repairs not provided by an ICON authorized service center; products used
for commercial or rental purposes; or products used as store display models. No other warranty beyond
that specifically set forth above is authorized by ICON.
ICON is not responsible or liable for indirect, special or consequential damages arising out of or in connection with the use or performance of the product or damages with respect to any economic loss, loss
of property, loss of revenues or profits, loss of enjoyment or use, costs of removal or installation or other
consequential damages of whatsoever nature. Some states do not allow the exclusion or limitation of incidental or consequential damages. Accordingly, the above limitation may not apply to you.
The warranty extended hereunder is in lieu of any and all other warranties and any implied warranties of
merchantability or fitness for a particular purpose is limited in its scope and duration to the terms set forth
herein. Some states do not allow limitations on how long an implied warranty lasts. Accordingly, the above
limitation may not apply to you.
This warranty gives you specific legal rights. You may also have other rights which vary from state to state.
ICON HEALTH & FITNESS, INC., 1500 S. 1000 W., LOGAN, UT 84321-9813
ORDERING REPLACEMENT PARTS
To order replacement parts, please see the front cover of this manual. To help us assist you, be prepared to provide the following information when contacting us:
• the model number and serial number of the product (see the front cover of the manual)
• the name of the product (see the front cover of this manual)
• the key number and description of the part(s) (see the PART LIST and the EXPLODED DRAWING near the
end of this manual)
Loading...