Volkswagen tou-70-03 Service Manual

g

Page 1 / 7 Volkswagen Touareg - Door trim

70 - 3

Door trim

Tools

Special tools, testers and auxiliary items required

 Release lever T10039 or Wedge T10039/1

Driver door trim, removing and installin

Note:

 When removing door trim, use Wedge T10039/1 to

prevent damage to surface of trim piece.

Removing

- Switch ignition off

Page 2 / 7Door trim

- Using Wedge T10039/1 , pry trim
out of handle recess in door trim.

- Remove bolts

- Remove two screws

- Using Wedge T10039/1 near securing
points, pry door trim out of mountings.

- Remove door trim from door by pulling
it upward.

- Press tabs in Bowden cable retainer
together

5 -

- Remove Bowden cable retainer

from inside door release mechanism

- arrow A -

- Disconnect Bowden cable

inside door release mechanism

- arrows -

and

and

- 2 -

- arrow B -

- 3 -

-4 -

.

.

.

- 7 -

.

- 5 -

from

- 6 -

- 1 -

-

- 6 -

.

- Depending on vehicle equipment,

g

disconnect electrical components from
wiring harnesses.

- Detach wiring harnesses from door

trim.

Page 3 / 7Door trim

Installing

- Installation is performed in reverse order of removal.

Note:

Before installing, check securing clips for damage



and replace if necessary.

Front passenger door trim, removing and installin

Note:

 When removing door trim, use Wedge T10039/1 to

prevent damage to surface of trim piece.

Removing

- Switch ignition off