SANDENVENDO AMERICA INC
HOT FOOD DISPLAY
Technical Service Manual
MODELS HFD000006 & 7
HFDC00002 & 3
HFDM00002
HFDH00001 thru 3
HFDHC0001 thru 10
Table of Contents
Commitment to Safety…….….…...….…2
Safety Warnings…….……..…….............3
HFD000006, HFD000007
Parts..…….…………………………….......4
Operation……………………..….………...8
HFDC00002, HFDC00003
HFDM00002
Troubleshooting……………..…….…....12
Controller Connections..……..…..….…13
HFDH00001,2,3
HFDHC0001,2,3,4,5,6,7,8,9,10
1213686J ECN 57413 1
SANDENVENDO AMERICA INC
A COMMITMENT TO SAFETY
The SandenVendo is committed to safety in every aspect of our product design.
SandenVendo is committed to alerting every user to the possible dangers involved in improper
handling or maintenance of our equipment. The servicing of any electrical or mechanical
device involves potential hazards, both to those servicing the equipment and to users of the
equipment. These hazards can arise because of improper maintenance techniques. The
purpose of this manual is to alert everyone servicing SandenVendo equipment of potentially
hazardous areas, and to provide basic safety guidelines for proper maintenance.
This manual contains various warnings that should be carefully read to minimize the risk of
personal injury to service personnel. This manual also contains service information to insure
that proper methods are followed to avoid damaging the Hot Food Display (HFD) or making it
unsafe. It is also important to understand these warnings are not exhaustive. SandenVendo
could not possibly know, evaluate, or advise of all of the conceivable ways in which service
might be done, nor can SandenVendo predict all of the possible hazardous results. The
safety precautions outlined in this manual provide the basis for an effective safety program.
Use these precautions, along with the service manual, when installing or servicing the HFD.
We strongly recommend a similar commitment to safety by every servicing organization. Only
properly trained personnel should have access to the interior of the machine. This will
minimize the potential hazards that are inherent in electrical and mechanical devices.
SandenVendo has no control over the machine once it leaves the premises. It is the owner or
lessor’s responsibility to maintain the Hot Food Display in a safe condition. Follow all Safety
Rules and Safety Warnings in this manual. If you have any questions, please contact the
Technical Services Department of SandenVendo.
SAFETY RULES
Read the Safety Warnings before installation or service.
Test for proper grounding before installing to reduce the risk of electrical shock and fire.
Turn off power switch and disconnect power cord from wall outlet before servicing.
Use only fully-trained service technicians for Power-On servicing.
Use adequate equipment when moving the HFD.
Use only authorized replacement parts.
Be aware of inherent dangers in rocking or tipping the HFD.
Always turn power off before plugging or unplugging HFD to wall outlet.
FOOD FOR THE HOT FOOD DISPLAY
The HFD, HFDM, and HFDH units are design to hold unwrapped, wrapped, and boxed
food. The HFDHC is designed to hold wrapped and boxed food. Hot food displays
are not designed to heat cold food - put only hot food in the hot food display.
1213686J ECN 57413 2
SANDENVENDO AMERICA INC
SAFETY WARNINGS
The HFD is for indoor use only. Do not use near water or in condensing humidity.
To prevent electric shock or fire, do not kink, pull, or pinch the power cord, and insure no
equipment is resting on the power cord. If the power cord is damaged, unplug and replace.
Do not connect with other plugs. Do not use an extension cord.
When unplugging, first turn off the power switch. Then pull the plug at the end of the power
cord, not by pulling the power cord, since the cord can be damaged, overheat, and cause a
fire.
Do not spray water on the HFD. It may cause an electric shock or fire.
Do not touch the power plug, switches, or other electrical parts with wet hands. It can cause
an electric shock.
Periodically check that the plug is pushed in all the way.
To prevent injuries due to falling objects, liquid spills, electric shock or fire, do not place heavy
objects or liquid-filled objects on top of the HFD.
To prevent electric shock or fire, do not use volatile or flammable products in or near the HFD.
When moving the HFD: turn the HFD off, unplug, and allow the unit to cool. To prevent glass
breakage and injury, do not push on the glass. Also, use proper equipment and lifting
techniques. Insure the product doesn’t tip while it is being moved.
If a lamp or any glass cracks or breaks, turn off the power and discard all food in the HFD.
Replace lamp and / or glass. Remove all glass fragments. Carefully inspect all surfaces,
corners, and gaskets to insure all glass fragments have been removed before returning HFD
to service.
Keep HFD out of direct sunlight and away from heat sources.
Do not hang from the door – this may cause injury or electric shock.
Turn off and unplug HFD before servicing, and let HFD cool before cleaning or servicing.
Use proper tools while servicing.
Use only authorized replacement parts.
The HFD temperatures are factory set to meet NSF food safety requirements. Changing
temperature settings may adversely impact food safety.
The lamps are an integral part of the food heating system. If a lamp is not illuminated, the
temperatures may not be maintained for food safety.
1213686J ECN 57413 3
SANDENVENDO AMERICA INC
Shelf assemblies
12
14
for electrical component part numbers
Bottom
Heater
Plate
Front
Gasket
PARTS
1 2 3 1
Front door gaskets
6 7 10 9 8
Lamp
13 22
Lamp
Socket
Bottom
Heater
Plate
Side
Gasket
11
HFD000006, HFD000007
Item Part # Description
1 1158489 Gasket, Door, Side
2 1158477 Gasket, Door, Upper
3 1158491 Gasket, Door, Lower
4 1201293-2 Controller
5 1207087 Heater Kit (not shown)
6 1207441 Shelf Assembly, Upper Left
7 1207465 Shelf Assembly, Middle Left
8 1207415 Shelf Assembly, Bottom
9 1207476 Shelf Assembly, Middle Right
10 1207453 Shelf Assembly, Upper Right
11 1158685 Gasket A
12 1158696 Gasket B
13 1159513 Lamp Socket
14 1159525 Xenon Heating Lamp
15 1255614 Power Cord Plug
16 1257854 Circuit Breaker, 20 Amp
17 1194238 Rear Door, HFD
18 1158673 Slide Rail, Lower (Horizontal)
19 1158969 Slide Rail, Side (Vertical)
20 1159604 Shelf Edge Gasket
21 1180812 Fan, HFD (HFD 7 only)
22 1158179 Weld Asy, Outer Top
Shelf edge gasket
20
(same each shelf)
Shelf Assembly Connector Colors
Item Connector Color Description
6 White Shelf Asy, Upper Left
7 Black Shelf Asy, Middle Left
8 Red (left) Green (right) Shelf Asy, Bottom Shelf
9 Yellow Shelf Asy, Middle Right
10 Blue Shelf Asy, Upper Right
(Vertical slide rail
same each side)
See last page for Controller Connections
Breaker
switch
Power cord
16
15
4
Controller
17 18 19
Rear door
and slides
1213686J ECN 57413 4
SANDENVENDO AMERICA INC
Rack
6
9
12
11
10
13
1 2
5
3
Item Part # Description
1* 1259989 Left Door w/ Center Handle Assembly
2* 1259989-1 Right Door w/ Center Handle Assembly
3 1185603-1 Frame Gasket (Horizontal, 2x)
4 1185603-2 Frame Gasket (Vertical, 2x)
5 1187405 Damper (one each side)
6 1202273 Extension Spring (one each side)
7 1199716 Rack, Top/Middle Shelf (not shown, 4x)
8 1199728 Rack, Bottom Shelf (not shown, 2x)
9 1201311 Shelf Guard (4x)
10 1207751 Shelf Assembly, Upper Left
11 1207775 Shelf Assembly, Middle Left
12 1207786 Shelf Assembly, Middle Right
13 1207763 Shelf Assembly, Upper Right
14 1219634 Rear Door Keep-Closed bracket (not shown)
15 1207087 Heater Kit (not shown)
16 1201293-3 Controller, HFDC (not shown)
4
Combo Serve Front Door & Shelf Parts
HFDC00002, HFDC00003
7
8
Rack
*Note when ordering replacement doors for units without the center door handles use
kit part number 1262106 so you get a set of matching doors (both left and right).
1213686J ECN 57413 5
Loading...