Vendo HFD000006 Service Manual

SANDENVENDO AMERICA INC

HFD000006, HFD000007

HFDC00002

HFDM00002

HFDH00001 HFDHC0001,2,3,4

HOT FOOD DISPLAY

Technical Service Manual

MODELS HFD000006 & 7

HFDC00002

HFDM00002 HFDH00001 HFDHC0001,2,3,4

Table of Contents

Commitment to Safety…….….…...….…2

Safety Warnings…….……..…….............3

Parts..…….……………………………......4

Operation……………………..….…….....8

Troubleshooting……………..…….…...12 Controller Connections..……..…..……13

1213686f ECN 55522 1

SANDENVENDO AMERICA INC

A COMMITMENT TO SAFETY

The SandenVendo is committed to safety in every aspect of our product design. SandenVendo is committed to alerting every user to the possible dangers involved in improper handling or maintenance of our equipment. The servicing of any electrical or mechanical device involves potential hazards, both to those servicing the equipment and to users of the equipment. These hazards can arise because of improper maintenance techniques. The purpose of this manual is to alert everyone servicing SandenVendo equipment of potentially hazardous areas, and to provide basic safety guidelines for proper maintenance.

This manual contains various warnings that should be carefully read to minimize the risk of personal injury to service personnel. This manual also contains service information to insure that proper methods are followed to avoid damaging the Hot Food Display (HFD) or making it unsafe. It is also important to understand these warnings are not exhaustive. SandenVendo could not possibly know, evaluate, or advise of all of the conceivable ways in which service might be done, nor can SandenVendo predict all of the possible hazardous results. The safety precautions outlined in this manual provide the basis for an effective safety program. Use these precautions, along with the service manual, when installing or servicing the HFD.

We strongly recommend a similar commitment to safety by every servicing organization. Only properly trained personnel should have access to the interior of the machine. This will minimize the potential hazards that are inherent in electrical and mechanical devices. SandenVendo has no control over the machine once it leaves the premises. It is the owner or lessor’s responsibility to maintain the Hot Food Display in a safe condition. Follow all Safety Rules and Safety Warnings in this manual. If you have any questions, please contact the Technical Services Department of SandenVendo.

SAFETY RULES

 Read the Safety Warnings before installation or service.  Test for proper grounding before installing to reduce the risk of electrical shock and fire.  Turn off power switch and disconnect power cord from wall outlet before servicing.  Use only fully-trained service technicians for Power-On servicing.  Use adequate equipment when moving the HFD.  Use only authorized replacement parts.  Be aware of inherent dangers in rocking or tipping the HFD.  Always turn power off before plugging or unplugging HFD to wall outlet.

FOOD FOR THE HOT FOOD DISPLAY

The HFD, HFDM, and HFDH units are design to hold unwrapped, wrapped, and boxed food. The HFDHC is designed to hold wrapped and boxed food. Hot food displays are not designed to heat cold food - put only hot food in the hot food display.

1213686f ECN 55522 2

SANDENVENDO AMERICA INC

SAFETY WARNINGS

The HFD is for indoor use only. Do not use near water or in condensing humidity. To prevent electric shock or fire, do not kink, pull, or pinch the power cord, and insure no

equipment is resting on the power cord. If the power cord is damaged, unplug and replace. Do not connect with other plugs. Do not use an extension cord. When unplugging, first turn off the power switch. Then pull the plug at the end of the power

cord, not by pulling the power cord, since the cord can be damaged, overheat, and cause a fire.

Do not spray water on the HFD. It may cause an electric shock or fire. Do not touch the power plug, switches, or other electrical parts with wet hands. It can cause

an electric shock. Periodically check that the plug is pushed in all the way. To prevent injuries due to falling objects, liquid spills, electric shock or fire, do not place heavy

objects or liquid-filled objects on top of the HFD. To prevent electric shock or fire, do not use volatile or flammable products in or near the HFD.

When moving the HFD: turn the HFD off, unplug, and allow the unit to cool. To prevent glass breakage and injury, do not push on the glass. Also, use proper equipment and lifting techniques. Insure the product doesn’t tip while it is being moved.

If a lamp or any glass cracks or breaks, turn off the power and discard all food in the HFD. Replace lamp and / or glass. Remove all glass fragments. Carefully inspect all surfaces, corners, and gaskets to insure all glass fragments have been removed before returning HFD to service.

Keep HFD out of direct sunlight and away from heat sources. Do not hang from the door – this may cause injury or electric shock. Turn off and unplug HFD before servicing, and let HFD cool before cleaning or servicing. Use proper tools while servicing. Use only authorized replacement parts. The HFD temperatures are factory set to meet NSF food safety requirements. Changing

temperature settings may adversely impact food safety. The lamps are an integral part of the food heating system. If a lamp is not illuminated, the

temperatures may not be maintained for food safety.

1213686f ECN 55522 3

(Vertical slide rail

Shelf edge gasket

Lamp Socket

Lamp

Rear door and slides

Bottom

Gasket

Bottom

Heater

Gasket

Controller

Breaker switch

Power cord

Front door gaskets

Shelf assemblies

Item Part # Description

21 1180812 Fan, HFD (HFD 7 only)

1 2 3 1 6 7 10 9 8

16 4 17

Shelf Assembly Connector Colors

8 Red (left) Green (right) Shelf Asy, Bottom Shelf 10 Blue Shelf Asy, Upper Right

HFD000006, HFD000007

See last page for Controller Connections

for electrical component part numbers

Plate Front

PARTS

SANDENVENDO AMERICA INC

1 1158489 Gasket, Door, Side 2 1158477 Gasket, Door, Upper 3 1158491 Gasket, Door, Lower 4 1201293 Controller 5 1207143 Heater Kit (not shown) 6 1207441 Shelf Assembly, Upper Left 7 1207465 Shelf Assembly, Middle Left 8 1207415 Shelf Assembly, Bottom 9 1207476 Shelf Assembly, Middle Right 10 1207453 Shelf Assembly, Upper Right 11 1158685 Gasket A 12 1158696 Gasket B 13 1159513 Lamp Socket 14 1159525 Xenon Heating Lamp 15 1216614 Power Cord Plug 16 1161921 Circuit Breaker, 15 Amp 17 1194238 Rear Door, HFD 18 1158673 Slide Rail, Lower (Horizontal) 19 1158969 Slide Rail, Side (Vertical)

Heater Plate Side

20 1159604 Shelf Edge Gasket

(same each shelf)

1213686f ECN 55522 4

Item Connector Color Description

6 White Shelf Asy, Upper Left 7 Black Shelf Asy, Middle Left

9 Yellow Shelf Asy, Middle Right

same each side)

+ 9 hidden pages