Operating Your System
With The KP-900 Wireless
Keypad/Remote
™
COMPLETE
CONTROL
Universal Remote Control®
This remote control was
Custom Programmed for you by:
For questions about your Custom Programming call:
Custom Programming of a complex home theater and/or a multi-room system is one of the most challenging tasks within an audio/video installation. It involves an intimate knowledge of how the components interact and exact details on the proper sequences of control.
Only a Complete Control dealer has the requisite experience and training to quickly and effectively customize a remote control for true automated operation.
Congratulations on your choice!
KP-900 Owners Manual © 2008 Universal Remote Control, Inc.
The information in this manual is protected by the copyright laws of the United States and other countries. No part of this manual may be copied or reproduced in any form without prior written consent from Universal Remote Control, Inc.
UNIVERSAL REMOTE CONTROL, INC. SHALL NOT BE LIABLE FOR OPERATIONAL, TECHNICAL OR EDITORIAL ERRORS/OMISSIONS MADE IN THIS MANUAL.
The information in this manual may be subject to change without prior notice.
Complete Control is a registered trademark of Universal Remote Control, Inc. Entertainment Made Simple is a trademark of Universal Remote Control, Inc.
All other brand or product names are trademarks or registered trademarks of their respective companies or organizations.
Universal Remote Control, Inc.
500 Mamaroneck Avenue, Harrison, NY 10528 Phone: (914) 835-4484 Fax: (914) 835-4532
TABLE OF 
CONTENTS
Introduction |
1 |
Understanding LCD Labeled Buttons |
1 |
Optional RF “No Rules” Operation |
2 |
Securing the Wall Bracket |
3 |
Installing Batteries |
3 |
Programming the KP-900 |
4 |
Selecting a New “Activity” |
5 |
Using the KP-900 to Control an “Activity” |
6 |
Displaying the Setup Screen |
7 |
Selecting from the Setup Screen |
7 |
Setting the LCD |
8 |
Sound Volume |
10 |
Light Settings |
10 |
System Settings |
11 |
Version Information Displays |
11 |
Factory Default |
12 |
USA Limited Warranty Statement |
12 |
Specifications |
14 |
Contact Universal Remote Control |
14 |
Notes: Your Listen Activities |
15 |
Notes: Your Watch Activities |
16 |
KP-900 OWNERS MANUAL
Congratulations!
You’ve purchased a unique wireless control. The KP-900 can be used as both a wall mounted keypad and as a hand-held remote control. The KP-900 achieves a magnificent combination of power and flexibility, simplifying and automating operation of even the most complex home theater system.
Wall Mounted Keypad and Hand-Held Remote Control
Once the wall bracket is securely installed on the wall, simply place the KP-900 into the bracket. Magnets snap the KP-900 into place. To use as a hand-held remote control, grasp the KP-900 from the top edge and pull it away from the bracket.
One Touch Multi-Colored Backlighting
Press any button to backlight the screen and the hard buttons.
Integrated Sound Signaling
The KP-900 incorporates a small speaker for beeps. Anytime you press a button, the KP-900 signals that it has understood your command with a beep sound.
Custom Labeled Buttons
The KP-900 is equipped with a bright, easy to read LCD screen which labels the six buttons to the right of the screen. These button labels change based on what you are watching or listening to. Thus, if you have selected Watching TV, you will see a list of buttons that are useful to that activity, while if you select DVD, the buttons will control the DVD.
Pressing the MAIN button displays the Main Menu pages of the KP-900. When you select one of the activities listed, the entire functionality of all the buttons changes to operate the selected device.
Page 1
KP-900 OWNERS MANUAL
Optional RF “No Rules” Operation
In combination with a Complete Control RF Base Station, the KP-900 can control your system without being in line-of-sight of the equipment. On the wall or off, that means that you never need to point the KP-900.
The MSC-400, the MRF-350 or the MRF-260 RF base station are compatible with the KP-900. All incorporate RF addressing. RF Addressing gives you the ability to control equipment locations throughout your home, even if they are concealed in other rooms or are behind closed doors.
1.The KP-900 sends radio waves in every direction, so you don’t have to point the remote anymore!
|
2.The RFX-250 RF Sensor can be freely |
|
|
positioned for optimal reception. |
|
3.The |
routes IR commands to the correct IR |
|
|
||
Flasher. |
|
|
4. Self-adhesive “Flashers” affix to the Infrared sensors on the front panels of your components. The Flashers relay commands to components. The flashers plug in to the base station’s rear flasher line outputs via their 10 foot cables. Uniquely, URC base
to rear panel IR Inputs via their adjustable IR Line Outputs.
Page 2
KP-900 OWNERS MANUAL
Securing the Wall Bracket
The KP-900 includes a wall bracket, four screws and four plastic caps to conceal the screwheads. Consult with a professional installer before attempting to secure the bracket to your wall. The included screws may not be appropriate for your walls.
Before making a hole in your wall, gather the family and evaluate the best height. Like a thermostat, the KP-900 should be at comfortable eye level for most of the family, typically between 54” to 62” from the floor to the top of the bracket (60” is typical).
Use a bubble level and a pencil to draw a line on the wall, then hold the bracket in place. Screw in the four screws and cover the screw heads with the included self adhesive caps.
Magnets in the bracket and the keypad keep the KP-900 securely in place, yet make it easy to remove when you need a hand-held remote control.
Installing Batteries
There are two battery compartments on the rear of the KP-900. Each compartment holds two AAA batteries for a total of four AAA batteries.
Open each battery cover by pressing the release and pulling back the cover on the back of the control. Remove the cover.
Observe the + and - polarity indicators on the batteries.
Place a battery into the compartment with the positive (+) terminal facing the bottom of the KP-900. Slide the battery up into the top position and insert the second battery into place.
Now, replace the battery cover by inserting the hinged end in first, then snapping the cover back into place.
Repeat the process with the second battery compartment.
Page 3
Loading...