Operating Instructions
For 4 in 1
SAT Remote Control
UR4-DSR
Universal Remote Control, Inc.
www.universalremote.com
OEE-0050B Rev 06 (02/06/07)
1 |
3 |
2
Before you program or operate the remote control, you must install two new AAA alkaline batteries.
STEP1 Remove the battery compartment cover on the back of your remote control.
STEP2 Check battery polarity carefully, and install the batteries as shown in the illustration below.
STEP3 Replace the battery compartment cover.
the SAT, with the option of controlling Refer to section F for programming the
TV , with the option of controlling volume
mute through your SAT or AUDIO.
for two, three or all four devices with one