For convenient multi-mode
connections that extend beyond
the 100-meter limitation of Ethernet
cabling, use the UF-MM-10G for
distances of up to 300 m and
speeds of up to 10 Gbps, or use the
UF-MM-1G for distances of up to
550m and speeds of up to 1 Gbps.
To connect copper Ethernet cables to
SFP ports, use the UF-RJ45-10G in an
SFP+ port for speeds of up to 10 Gbps
and distances of up to 30m, oruse the
UF-RJ45-1G in an SFP port for speeds
of up to 1 Gbps and distances of up to
100 m. For short distances of 1to3m,
use the UDC-1, UDC-2, or UDC-3
direct attach passive copper cables
between SFP+ ports for speeds of up
to 10Gbps.
192.168.1.1
7
Gbps
1.6
192.168.122.22
/
5.9 Gbps
192.168.12.32
8
0
Gbps
2.2
/
UniFi PoE Switch 48
Mbps
829.3
UniFi® AC APs
Dual-Link
via SFP+
UniFi Switch US-16-XG
Tower Installation
Outdoor Use
For long-distance single-mode runs,
use the UF-SM-10G for distances of
up to 10 km at 10 Gbps, or use the
UF-SM-1G for distances of up to
3km at 1 Gbps. To protect DC power
and ber, deploy EdgePoint® with
EdgePower™.
Deploy a BiDi (BiDirectional) model,
UF-SM-1G-S or UF-SM-10G-S,
to maximize re-use of existing
infrastructure. You must deploy
a BiDi model as a paired set of
modules because the pair uses two
different wavelengths, upstream and
WARNING: CLASS 1 LASER PRODUCT, IEC/EN 60825-1:2014 – Do not look into
the ends of the ber optic cable or SFP modules while converters are powered.
3
Model Comparison
UF-RJ45-1GUF-RJ45-10G
Datasheet
Supported
Media
Connector
Type
Data Rate10/100/1000 Mbps1/10 Gbps
Cable
Distance
Operating
Temperature
Pack Options20-Pack1-Pack
CopperCopper
RJ45RJ45
1 Gbps
100 m
0 to 70° C
(32 to 158° F)
(Cat 5e)
100 m30 m
0 to 70° C
(32 to 158° F)
10 Gbps
(Cat 6A)
Models: FC‑SM‑100, FC‑SM‑200,
FC‑SM‑300
Single‑Mode LC Fiber Cable
Build your outdoor ber network using our FiberCable.
Lightweight and exible, FiberCable is ideal for tower
deployments of our outdoor routing and switching
products, such as the EdgePoint. Available in 100, 200,
and 300ft lengths.
• Outdoor-Rated Jacket with Ripcord
• Integrated Weatherproof Tape
• Kevlar Yarn for Added Tensile Strength
• Outer Diameter of Cable: 6.0 ± 0.2mm
• Six-Strand Single-Mode (G.657.A2)
• Outer Diameter of Fiber Strand: 0.25mm Nominal
• Insertion Loss
• 1310 nm: ≤0.5 dB/km
• 1550 nm: ≤0.5 dB/km
Models: UDC‑1, UDC‑2, UDC‑3
10G SFP+ Direct Attach
Passive Copper Cables
Available in lengths of 1, 2 and 3 meters, the 10G SFP+
direct attach passive copper cables support multi-gigabit
data rates of up to 10.5 Gbps. The SFP+ direct attach passive
copper cables are ideal for indoor telecommunications and
data networks using our routing and switching products,
such as the EdgeRouter, EdgeSwitch, and UniFi Switch.
• Hot-swappable SFP+
• Cable Diameter: 30AWG
• Case Operating Temperature: 0 to 70° C (32to158°F)
4
Models: UOC‑0.5, UOC‑1, UOC‑2,
UOC‑3, UOC‑5
10G Multi‑Mode ODN Cables
Scale your ber network using our exible
and lightweight ber patch cables. The 10G
multi-mode ber patch cables are ideal for indoor
telecommunications and data networks using
our routing and switching products, such as
the EdgeRouter, EdgeSwitch, and UniFi Switch.
Available in 0.5, 1, 2, 3, and 5 meter lengths.
Specications
U Fiber ODN Cables
ConnectorLC-LC
Fiber Mode50 / 125 µm
Fiber TypeDuplex
Cable Length
UOC-0.5
UOC-1
UOC-2
UOC-3
UOC-5
Cable JacketPVC
Cable StandardOM3
Insertion Loss≤ 0.3 dB
PolishUPC to UPC
Jacket OD2.0 mm
Wavelength850 / 1310 nm
Jacket ColorAqua
Repeatability ≤ 0.1 dB
Durability≤ 0.2 dB (1000 Times Mating)
Return Loss≤ 50 dB
Operating Temperature-40 to 75° C (-40 to 167° F)
Datasheet
0.5 m
1 m
2 m
3 m
5 m
Specications are subject to change. Ubiquiti products are sold with a limited warranty described at: www.ubnt.com/support/warranty
The limited warranty requires the use of arbitration to resolve disputes on an individual basis, and, where applicable, specify arbitration instead of jury