TP-Link TL-WN721N, TL-WN721NC Quick Installation Guide
Quick
Network Name(SSID)
Channel
Signal
Security
1 (2.4G)
2 (2.4G)
4 (2.4G)
9 (2.4G)
None
None
WPA/WPA2-Personal
None
TP-LINK_123456
TP-LINK_ABC
TP-LINK_456789
TP-LINK_c
9 (2.4G)
TP-LINK_123
WPA/WPA2-Personal
TP-LINK_A
TP-LINK_123456
Network Na
TP-LINK_XYZ
TP-LINK_123456
TP-LINK_ABC
TP-LINK_XYZ
TP-LINK_123456
TP-LINK_ABC
Installation
Guide
TL-WN721N / TL-WN721NC
150Mbps Wireless N USB Adapter
System requirement:
Windows 8.1 Windows 8 Windows 7
Windows Vista Windows XP
150Mbps
TL-WN721N
For more information, please visit our website: http://www.tp-link.com
7106504929 REV6.0.0
1
2
Connect to a Computer
Insert the adapter into a USB port on your computer, either directly or via the USB cable/cradle provided.
Option 2Option 1
or
150Mbps
TL-WN721N
Note: In Windows XP, a Found New Hardware Wizard window will pop up after the adapter has been inserted. Please click Cancel.
TL-WN721N
150Mbps
Install the Software
* You can also download the driver and utility at www.tp-link.com/en/ if your computer can access the Internet via a wired connection.
Setup Wizard
150Mbps PCI Express
Model:
Note:
If the Resource CD screen
does not display, browse
the files on the CD and
double-click Autorun.exe.
150Mbps
TL-WN721N
TL-WN721N
Install Driver and Utility
User Guide
TL-WN722N
Browse CD
TL-WN781ND
TL-WN781ND
EXIT
TP-LINK Wireless Configuration Utility and Driver - InstallShield Wizard
Welcome to the InstallShield Wizard for
TP-LINK Wireless Configuration Utility and
Driver
The InstallShield Wizard will install TP-LINK Wireless
Configuration Utility and Driver on your computer. To
continue, click Next.
Next >< Back
Cancel
3
Insert the TP-LINK resource CD into the CD-ROM
drive. The Resource CD screen will pop up
automatically.
Select the model TL-WN721N and click Install
Driver and Utility.
The Install Shield Wizard window will
appear. Click Next and follow the
instructions to finish the installation process.
Join a Wireless Network
For Windows 8/7/Vista/XP users:
You can join a wireless network using the TWCU (TP-LINK Wireless Configuration Utility), or WPS (Wi-Fi Protected Setup) if your wireless network supports it.
Via TWCU:
Status
WPS Network Profile Advanced
TP-LINK_ABCDEF
WPA/WPA2-Personal
6 (2.4G)
Rescan
Select your target wireless network from the list and
click Connect. If the network is secure, enter its
password.The symbol indicates a successful
connection.
or
Via WPS:
Press the WPS button on your wireless router
or gateway. Within 2 minutes, press and hold
the WPS button on the adapter for 3 seconds.
Configuring the wireless network.
Successfully connected to the network by WPS!
The connection process takes a few
minutes and you will see the above
screen when it is successful.
OK
For Windows 8.1 users:
Windows 8.1 users can join a wireless network using built-in Windows wireless utility.
Networks
Wi-Fi
TP-LINK_ABCDEF
Connect automatically
Connect
Click the icon at the bottom of your screen,
and a network list will appear. Select your target
network and then click Connect. If the network
is secure, enter its password.
Networks
Wi-Fi
The connection process takes a few seconds
and you will see the above screen when it is
successful.
TP-LINK_ABCDEF
Connected
Loading...